ALCATEL-IND1-ISIS-SPB-MIB

All MIBs › ALCATEL-IND1-ISIS-SPB-MIB

Organization: Alcatel-Lucent

Last Updated: 2013-11-07

Category: VLAN and Bridging, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IS-IS Shortest Path Bridging MIB for managing SPB topology, I-SIDs, and B-VLAN parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-ISIS-SPB-MIB?

ALCATEL-IND1-ISIS-SPB-MIB is an Alcatel-Lucent enterprise MIB for the OmniSwitch IND1 platform family, managing IS-IS Shortest Path Bridging (SPB), an alternative to spanning tree that uses a link-state protocol to compute loop-free Ethernet paths. It exposes system-wide SPB configuration (control B-VLAN, admin state, IS-IS area address and system ID, bridge priority) along with separate SPBM/SPBV mode objects for the two SPB variants. As a configuration/protocol-status MIB it lets an administrator confirm SPB is enabled with the correct area address and bridge priority across a fabric of switches. It is deployed on Alcatel-Lucent OmniSwitch data-center and campus switches building an SPB fabric. Engineers can download the ALCATEL-IND1-ISIS-SPB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-ISIS-SPB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch (IND1 family) switches

Monitoring Examples

An administrator compares alcatelIND1IsisSpbSysAreaAddress and alcatelIND1IsisSpbSysBridgePriority across fabric switches to confirm all members share a consistent IS-IS area and an expected bridge-priority hierarchy for root election.

What Can Be Monitored

SPB admin state
IS-IS area address and bridge priority

Imported Objects

From ALCATEL-IND1-BASE

routingIND1IsisSpb

OBJECT-IDENTITY

From IEEE8021-CFM-MIB

VlanIdOrNone

From IEEE8021-TC-MIB

IEEE8021BridgePortNumber
IEEE8021PbbIngressEgress
IEEE8021PbbServiceIdentifierOrUnassigned

From IF-MIB

InterfaceIndexOrZero

From Q-BRIDGE-MIB

VlanId

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1IsisSpbAdjDynamicEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1		not-accessible	This table is used to determine operational values of digests and interfaces of neighbor bridges.
ALC alcatelIND1IsisSpbAdjDynamicEntryAdjState	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.4	AlcatelIND1IsisSpbAdjState	read-only	The state of the adjacency.
OCT alcatelIND1IsisSpbAdjDynamicEntryAdjUpTime	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.5	OCTET STRING	read-only	The time when the adjacency last entered the up state.
TIM alcatelIND1IsisSpbAdjDynamicEntryAdjUpTimeStamp	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.14	TimeStamp	read-only	The sysUpTime value when the adjacency last entered the up state.
I32 alcatelIND1IsisSpbAdjDynamicEntryHoldRemaining	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.6	Integer32	read-only	The remaining hold time in seconds.
I32 alcatelIND1IsisSpbAdjDynamicEntryHoldTimer	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.7	Integer32	read-only	The holding time in seconds for this adjacency updated from received IIH PDUs.
NUM alcatelIND1IsisSpbAdjDynamicEntryIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.2	InterfaceIndexOrZero	not-accessible	System interface/index which defines this adjacency A value of 0 is a wildcard for any interface on which SPB Operation is enabled.
U32 alcatelIND1IsisSpbAdjDynamicEntryNbrExtLocalCircuitId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.8	Unsigned32	read-only	The extended circuit id advertised by the peer.
U32 alcatelIND1IsisSpbAdjDynamicEntryNeighPriority	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.9	Unsigned32	read-only	Priority of the neighboring Intermediate System for becoming the Designated Intermediate System.
MAC alcatelIND1IsisSpbAdjDynamicEntryPeerSysId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.3	MacAddress	not-accessible	The SPB System Identifier of this peer. This is used to identify a neighbor uniquely.
ALC alcatelIND1IsisSpbAdjDynamicEntryPeerSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.10	AlcatelIND1IsisSpbSystemName	read-only	IS-IS system name of peer. This is the ASCII name assigned to the bridge to aid management.
INT alcatelIND1IsisSpbAdjDynamicEntryRestartStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.11	INTEGER	read-only	The graceful restart status of the adjacency.
T/F alcatelIND1IsisSpbAdjDynamicEntryRestartSupport	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.12	TruthValue	read-only	Indicates whether adjacency supports ISIS graceful restart. If 'true', the adjacency supports graceful restart.
T/F alcatelIND1IsisSpbAdjDynamicEntryRestartSuppressed	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.13	TruthValue	read-only	Indicates if the adjacency has requested this router to suppress advertisement of the adjacency in this router's LSPs. If 'true' the adjacency has requested to suppress advertisement of the LSPs.
ALC alcatelIND1IsisSpbAdjDynamicEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
alcatelIND1IsisSpbAdjDynamicTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.5		not-accessible	The Adjacency table. cf. ieee8021SpbAdjDynamicTable cf. show ip isis adjacency
alcatelIND1IsisSpbAdjGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.5			The collection of objects to represent Isis Spb Adjacent Group SPBM information
U32 alcatelIND1IsisSpbAdjStaticEntryAFDConfig	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.10	Unsigned32	read-only	Configuration is made by admin or auto-fabric on this interface
U32 alcatelIND1IsisSpbAdjStaticEntryCircuitId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.8	Unsigned32	read-only	The local circuit id.
alcatelIND1IsisSpbAdjStaticEntryConfigGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.3			The collection of objects used to represent Isis Spb Adjacent Static information
U32 alcatelIND1IsisSpbAdjStaticEntryHelloInterval	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.4	Unsigned32	read-create	Maximum period, in seconds, between IIH PDUs.
U32 alcatelIND1IsisSpbAdjStaticEntryHelloMultiplier	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.5	Unsigned32	read-create	This value is multiplied by the corresponding HelloInterval and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello packets from this IS
ALC alcatelIND1IsisSpbAdjStaticEntryIfAdminState	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.6	AlcatelIND1IsisSpbAdjState	read-create	The administrative state of this interface/port. Up is the default. This object is persistent.
NUM alcatelIND1IsisSpbAdjStaticEntryIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.2	InterfaceIndexOrZero	not-accessible	The System interface/index which defines this adjacency. A value of 0 is a wildcard for any interface on which SPB Operation is supported.
ALC alcatelIND1IsisSpbAdjStaticEntryIfOperState	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.9	AlcatelIND1IsisSpbIfOperState	read-only	The current operational state of IS-IS protocol on this interface.
ALC alcatelIND1IsisSpbAdjStaticEntryMetric	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.3	AlcatelIND1IsisSpbLinkMetric	read-create	The alcatelIND1IsisSpb metric (incremental cost) to this peer. The contribution of this link to total path cost. Recommended values are inversely proportional to link speed. Range is (1..16777215) where 16777215 (0xFFFFFF) is infinity; infinity signifies that the adjacency is UP, but is not to be used for traffic. This object is persistent.
ROW alcatelIND1IsisSpbAdjStaticEntryRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.7	RowStatus	read-create	The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
ALC alcatelIND1IsisSpbAdjStaticEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
alcatelIND1IsisSpbAdjStaticTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3		not-accessible	A table containing the SPB configuration data for a neighbor. cf. ieee8021SpbAdjStaticTable
alcatelIND1IsisSpbAdjStaticTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.3.1		not-accessible	This table can be used to display the interfaces and metrics of a neighbor bridge.
alcatelIND1IsisSpbCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.2
alcatelIND1IsisSpbComplianceSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.2.1			Compliance to Alcatel IND1 ISIS SPBM mode
alcatelIND1IsisSpbConformance	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2
VLA alcatelIND1IsisSpbEctStaticEntryBaseVid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.2	VlanId	not-accessible	Base VID to use for this ECT-ALGORITHM. Traffic B-VID (SPBM) or Management VID (SPBV). A Base VID value of 4095 is a wildcard for any Base VID assigned to SPB operation.
ALC alcatelIND1IsisSpbEctStaticEntryEctAlgorithm	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.3	AlcatelIND1IsisSpbEctAlgorithm	read-create	This identifies the tie-breaking algorithms used in Shortest Path Tree computation. Values range from 00-80-c2-01 to 00-80-c2-16 for 802.1 for each the 16 ECT behaviors. This object is persistent.
ALC alcatelIND1IsisSpbEctStaticEntryMulticastMode	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.6	AlcatelIND1IsisSpbmMulticastMode	read-create	This identifies the tandem multicast-mode of this bvlan. A value of 0 indicates (S,G) mode, while a value of 1 indicates (*,G) mode.
MAC alcatelIND1IsisSpbEctStaticEntryRootBridgeSysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.8	MacAddress	read-only	Mac address of the root bridge. This object's value has meaning only when the bvlan is in (*,G) mode (e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode is set to gmode).
ALC alcatelIND1IsisSpbEctStaticEntryRootBridgeSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.7	AlcatelIND1IsisSpbSystemName	read-only	Name of the root bridge. This object's value has meaning only when the bvlan is in (*,G) mode (e.g. alcatelIND1IsisSpbEctStaticEntryMulticastMode is set to gmode).
ROW alcatelIND1IsisSpbEctStaticEntryRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.5	RowStatus	read-create	The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
ALC alcatelIND1IsisSpbEctStaticEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
alcatelIND1IsisSpbEctStaticTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4		not-accessible	The Equal Cost Tree (ECT) static configuration table. cf. ieee8021SpbEctStaticTable
alcatelIND1IsisSpbEctStaticTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1		not-accessible	The Equal Cost Tree static configuration Table defines the ECT ALGORITHM for the Base VID and if SPBV is used for the SPVID.
alcatelIND1IsisSpbGroups	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1
VLA alcatelIND1IsisSpbIngressMacBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.1	VlanId	not-accessible	The vlan to which this entry belongs.
alcatelIND1IsisSpbIngressMacFilterEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1		not-accessible	The ingress mac filter table. cf. show spb isis ingress-mac-filter
alcatelIND1IsisSpbIngressMacFilterTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13		not-accessible	The ingress mac filter table. cf. show ip isis ingress-mac-filter
alcatelIND1IsisSpbIngressMacGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.6			The collection of objects to represent Isis Spb Ingress Mac Group
NUM alcatelIND1IsisSpbIngressMacIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.4	InterfaceIndexOrZero	read-only	The ifindex of this entry.
MAC alcatelIND1IsisSpbIngressMacSysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.2	MacAddress	not-accessible	The mac-address that identifies this entry.
ALC alcatelIND1IsisSpbIngressMacSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.13.1.3	AlcatelIND1IsisSpbSystemName	read-only	The name of the bridge identified by this entry.
I32 alcatelIND1IsisSpbLSPAllocLen	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.13	Integer32	read-only	The length allocated for the LSP to be stored.
I32 alcatelIND1IsisSpbLSPAttributes	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.11	Integer32	read-only	Attributes associated with the LSP. These include the attached bit, overload bit, IS type of the system originating the LSP and the partition repair capability. The attached bit and the overload bit are of significance only when present in the LSP numbered zero and should be ignored on receipt in any other LSP.
OCT alcatelIND1IsisSpbLSPBuff	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.14	OCTET STRING	read-only	The LSP as it exists in the LSP database.
I32 alcatelIND1IsisSpbLSPChecksum	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.4	Integer32	read-only	The checksum of contents of LSP from the SourceID field in the LSP till the end. The checksum is computed using the Fletcher checksum algorithm.
alcatelIND1IsisSpbLSPEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1		not-accessible	Each row entry in the alcatelIND1IsisSpbLSPTable represents an LSP in the LSP database.
alcatelIND1IsisSpbLSPGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.7			The collection of objects to represent Isis Spb LSP Group SPBM information
OCT alcatelIND1IsisSpbLSPId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.2	OCTET STRING	not-accessible	The LSP Id. The format is 6 octets of ajacency system-id followed by 1 octet LanId and 1 octet LSP Number.
I32 alcatelIND1IsisSpbLSPLifetimeRemain	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.5	Integer32	read-only	Remaining lifetime of this LSP. This is a decrementing counter that decrements in seconds. When the remaining lifetime becomes zero, the contents of the LSP should not be considered for SPF calculation.
I32 alcatelIND1IsisSpbLSPMaxArea	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.9	Integer32	read-only	Maximum number of areas supported by the originator of the LSP. A value of 0 indicates a default of 3 areas.
I32 alcatelIND1IsisSpbLSPPktType	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.7	Integer32	read-only	Packet type for instance Hello PDUs, LSPs, CSNPs or PSNPs.
I32 alcatelIND1IsisSpbLSPPktVersion	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.8	Integer32	read-only	The version of the ISIS protocol that generated the Packet.
C32 alcatelIND1IsisSpbLSPSeq	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.3	Counter32	read-only	The sequence number of an LSP. The sequence number is a four byte quantity that represents the version of an LSP. The higher the sequence number, the more up to date the information. The sequence number is always incremented by the system that originated the LSP and ensures that there is only one version of that LSP in the entire network.
I32 alcatelIND1IsisSpbLSPSysIdLen	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.10	Integer32	read-only	The length of the system-id as used by the originator.
alcatelIND1IsisSpbLSPTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9		not-accessible	The LSP table (database). cf. show ip isis database
ALC alcatelIND1IsisSpbLSPTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
I32 alcatelIND1IsisSpbLSPUsedLen	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.12	Integer32	read-only	The used length for the LSP. For an LSP that is not self originated, the used length is always equal to alloc len. For self originated LSPs, the used length is less than or equal to the alloc len.
I32 alcatelIND1IsisSpbLSPVersion	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.9.1.6	Integer32	read-only	The version of the ISIS protocol that generated the LSP.
alcatelIND1IsisSpbMib	1.3.6.1.4.1.6486.801.1.2.1.10.17.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Configuration Of Global OSPF Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1IsisSpbMibObjects	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1
ALC alcatelIND1IsisSpbmSysMode	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.10	AlcatelIND1IsisSpbMode	read-write	Indication of supporting SPBM mode auto(=1)/manual(=2) auto => enable SPBM mode and auto allocate SPsourceID. manual => enable SPBM mode and manually assign SPsourceID. The default is auto. This object is persistent. cf. ieee8021SpbmSysMode
ALC alcatelIND1IsisSpbmSysSPSourceId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.8	AlcatelIND1IsisSpbmSPsourceId	read-write	The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from this bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID. This object is persistent. cf. ieee8021SpbmSysSPSourceId
VLA alcatelIND1IsisSpbMulticastSourceBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.3	VlanId	not-accessible	The bvlan associated with the multicast source.
alcatelIND1IsisSpbMulticastSourceEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1		not-accessible	This table can be used to display information about multicast sources.
alcatelIND1IsisSpbMulticastSourceGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.8			The collection of objects to represent Isis Spb Multicast Source Group SPBM information
T/F alcatelIND1IsisSpbMulticastSourceReachable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.5	TruthValue	read-only	True if we have a path to the multicast source.
alcatelIND1IsisSpbMulticastSourceSpfTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12		not-accessible	The multicast source spf table. cf. show ip isis multicast-sources-spf
alcatelIND1IsisSpbMulticastSourceSpfTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1		not-accessible	This table can be used to display the spf table of multicast sources in a SPB network.
MAC alcatelIND1IsisSpbMulticastSourceSpfTableEntryBMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.2	MacAddress	not-accessible	The mac address of the multicast source.
VLA alcatelIND1IsisSpbMulticastSourceSpfTableEntryBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.3	VlanId	not-accessible	The bvlan of the multicast source spf entry.
MAC alcatelIND1IsisSpbMulticastSourceSpfTableEntryDestMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.4	MacAddress	not-accessible	The destination mac address of the multicast source spf entry
U32 alcatelIND1IsisSpbMulticastSourceSpfTableEntryHopCount	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.9	Unsigned32	read-only	The hop count of the multicast source spf entry.
NUM alcatelIND1IsisSpbMulticastSourceSpfTableEntryIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.5	InterfaceIndexOrZero	read-only	The outbound ifindex of the multicast source spf entry.
ALC alcatelIND1IsisSpbMulticastSourceSpfTableEntryMetric	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.8	AlcatelIND1IsisSpbLinkMetric	read-only	The path metric of the multicast source spf entry.
MAC alcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.7	MacAddress	read-only	The next hop system mac of the multicast source spf entry.
ALC alcatelIND1IsisSpbMulticastSourceSpfTableEntryNHopName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.6	AlcatelIND1IsisSpbSystemName	read-only	The next hop system name of the multicast source spf entry.
ALC alcatelIND1IsisSpbMulticastSourceSpfTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.12.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
MAC alcatelIND1IsisSpbMulticastSourceSysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.2	MacAddress	not-accessible	The mac address of the bridge associated with the multicast source.
ALC alcatelIND1IsisSpbMulticastSourceSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.4	AlcatelIND1IsisSpbSystemName	read-only	Name of the bridge associated with the multicast source.
alcatelIND1IsisSpbMulticastSourceTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10		not-accessible	The multicast source table. cf. show ip isis multicast-sources
ALC alcatelIND1IsisSpbMulticastSourceTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.10.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
alcatelIND1IsisSpbMulticastTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8		not-accessible	The multicast table. cf. show ip isis multicast-table
alcatelIND1IsisSpbMulticastTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1		not-accessible	This table can be used to display the multicast table for SPB
VLA alcatelIND1IsisSpbMulticastTableEntryBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.2	VlanId	not-accessible	Bvlan of the multicast entry.
alcatelIND1IsisSpbMulticastTableEntryGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.9			The collection of objects to represent Isis Spb Multicast Group SPBM information
NUM alcatelIND1IsisSpbMulticastTableEntryIfIndexInbound	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.6	InterfaceIndexOrZero	read-only	Inbound interface index of the multicast source, zero means local node is multicast source
NUM alcatelIND1IsisSpbMulticastTableEntryIfIndexOutbound	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.4	InterfaceIndexOrZero	not-accessible	Outbound interface index of the multicast entry, zero means local node is multicast receiver
OID alcatelIND1IsisSpbMulticastTableEntryIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.8	AlcatelSpbServiceIdentifier	read-only	The service identifier, e.g. isid number of the multicast entry.
MAC alcatelIND1IsisSpbMulticastTableEntryMulticastMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.3	MacAddress	not-accessible	Multicast destination MAC of the multicast entry.
MAC alcatelIND1IsisSpbMulticastTableEntrySrcMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.5	MacAddress	read-only	System MAC of the multicast source, all zero means any MAC.
ALC alcatelIND1IsisSpbMulticastTableEntrySysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.7	AlcatelIND1IsisSpbSystemName	read-only	System name of multicast source
ALC alcatelIND1IsisSpbMulticastTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.8.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
ALC alcatelIND1IsisSpbNodeBridgePriority	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.5	AlcatelIND1IsisSpbBridgePriority	read-only	This is a 16 bit quantity which ranks the SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its impact depends on the tie breaking algorithm.
alcatelIND1IsisSpbNodeGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.13			The collection of objects to represent Isis Spb Node Group SPBM information
ALC alcatelIND1IsisSpbNodeSPSourceId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.4	AlcatelIND1IsisSpbmSPsourceId	read-only	The Shortest Path Source Identifier. It is the high order 3 bytes for Group Address DA from the bridge. Note that only the 20 bits not including the top 4 bits are the SPSourceID.
MAC alcatelIND1IsisSpbNodeSysId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.2	MacAddress	not-accessible	SYS ID used for all SPB instances on the bridge. A six byte network wide unique identifier.
ALC alcatelIND1IsisSpbNodeSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.3	AlcatelIND1IsisSpbSystemName	read-only	Name to be used to refer to the SPB bridge. This is advertised in IS-IS and used for management.
alcatelIND1IsisSpbNodeTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6		not-accessible	The Node table. cf. show ip isis nodes
alcatelIND1IsisSpbNodeTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1		not-accessible	This table can be used to display information about known bridges.
ALC alcatelIND1IsisSpbNodeTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.6.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
alcatelIND1IsisSpbProtocolConfig	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2
alcatelIND1IsisSpbProtocolConfigGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.2			The collection of objects used to represent alcatelIND1IsisSpbProtocol
T/F alcatelIND1IsisSpbProtocolGracefulRestart	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.7	TruthValue	read-write	The value of alcatelIND1IsisSpbProtocolGracefulRestart specifies whether the graceful restart is enabled or disabled for this instance of IS-IS.
T/F alcatelIND1IsisSpbProtocolGRHelperMode	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.8	TruthValue	read-write	The value of alcatelIND1IsisSpbProtocolGRHelperMode specifies whether the graceful restart helper mode is enabled or disabled for this instance of IS-IS. alcatelIND1IsisSpbProtocolGRHelperMode is valid only if the value of alcatelIND1IsisSpbProtocolGracefulRestart is 'true'. When alcatelIND1IsisSpbProtocolGRHelperMode has a value of 'true' graceful restart helper capabilities are enabled. When it has a value of 'false' the graceful restart helper capabilities are disabled.
U32 alcatelIND1IsisSpbProtocolLspInitialWait	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.5	Unsigned32	read-write	The value of alcatelIND1IsisSpbProtocolLspInitialWait defines the initial LSP generation delay (in milliseconds).
U32 alcatelIND1IsisSpbProtocolLspMaxWait	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.4	Unsigned32	read-write	The value of alcatelIND1IsisSpbProtocolLspWait defines the maximum interval (in milliseconds) between two consecutive ocurrences of an LSP being generated.
U32 alcatelIND1IsisSpbProtocolLspSecondWait	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.6	Unsigned32	read-write	The value of alcatelIND1IsisSpbProtocolLspInitialWait defines the hold time between the first and second LSP generation (in milliseconds).
U32 alcatelIND1IsisSpbProtocolSpfInitialWait	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.2	Unsigned32	read-write	The value of alcatelIND1IsisSpbProtocolSpfInitialWait defines the initial SPF calculation delay (in milliseconds) after a topology change.
U32 alcatelIND1IsisSpbProtocolSpfMaxWait	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.1	Unsigned32	read-write	The value of alcatelIND1IsisSpbProtocolSpfMaxWait defines the Maximum interval between two consecutive spf calculations in milliseconds.
U32 alcatelIND1IsisSpbProtocolSpfSecondWait	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.2.3	Unsigned32	read-write	The value of alcatelIND1IsisSpbProtocolSpfSecondWait defines the hold time between the first and second SPF calculation (in milliseconds). Subsequent SPF runs will occur at exponentially increasing intervals of spf-second-wait i.e. if spf-second-wait is 1000, then the next SPF will run after 2000 msec, the next one at 4000 msec etc until it is capped off at spf-wait value. The SPF interval will stay at spf-wait value until there are no more SPF runs scheduled in that interval. After a full interval without any SPF runs, the SPF interval will drop back to spf-initial-wait.
alcatelIND1IsisSpbServiceTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14		not-accessible	The services table. cf. show spb isis services
alcatelIND1IsisSpbServiceTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1		not-accessible	This table can be used to display the local configured and dynamically learned services.
VLA alcatelIND1IsisSpbServiceTableEntryBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.2	VlanId	not-accessible	Bvlan of the service.
alcatelIND1IsisSpbServiceTableEntryGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.10			The collection of objects to represent Isis Spb Service Group SPBM information
OID alcatelIND1IsisSpbServiceTableEntryIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.3	AlcatelSpbServiceIdentifier	not-accessible	The service identifier, e.g. isid number
ALC alcatelIND1IsisSpbServiceTableEntryIsidFlags	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.6	AlcatelIND1IsisSpbmIsidFlags	read-only	Service flags e.g. source or sink of multicast traffic
MAC alcatelIND1IsisSpbServiceTableEntrySysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.4	MacAddress	not-accessible	System MAC of the SPB node on which the service is configured
ALC alcatelIND1IsisSpbServiceTableEntrySysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.5	AlcatelIND1IsisSpbSystemName	read-only	System name of SPB node on which the service is configured
ALC alcatelIND1IsisSpbServiceTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.14.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
VLA alcatelIND1IsisSpbSpfBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.1	VlanId	not-accessible	The vlan to which this entry belongs.
alcatelIND1IsisSpbSpfGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.11			The collection of objects to represent Isis Spb Spf Group SPBM information
I32 alcatelIND1IsisSpbSpfHopCount	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.8	Integer32	read-only	The number of hops needed to reach the bridge identified by this entry.
NUM alcatelIND1IsisSpbSpfIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.4	InterfaceIndexOrZero	read-only	The outgoing interface index for reaching the bridge identified by this entry.
ALC alcatelIND1IsisSpbSpfMetric	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.7	AlcatelIND1IsisSpbLinkMetric	read-only	The metric/incremental cost to reach the bridge identified by this entry.
MAC alcatelIND1IsisSpbSpfNextHopSysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.5	MacAddress	read-only	The mac-address of the next-hop for reaching the bridge identified by this entry
ALC alcatelIND1IsisSpbSpfNextHopSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.6	AlcatelIND1IsisSpbSystemName	read-only	Name of the next-hop bridge for reaching the bridge identified by this entry
MAC alcatelIND1IsisSpbSpfSysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.2	MacAddress	not-accessible	The mac-address of the bridge identified by this entry.
ALC alcatelIND1IsisSpbSpfSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1.3	AlcatelIND1IsisSpbSystemName	read-only	Name of the bridge identified by this entry.
alcatelIND1IsisSpbSpfTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11		not-accessible	The spf table. cf. show spb isis spf
alcatelIND1IsisSpbSpfTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.11.1		not-accessible	This table can be used to display reachability information about known bridges, calculated by the Spf algorithm.
alcatelIND1IsisSpbSys	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1
INT alcatelIND1IsisSpbSysAdminState	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.2	INTEGER	read-write	Controls the operational state of the ISIS-SPB protocol. Default value is disable(2).
ADR alcatelIND1IsisSpbSysAreaAddress	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.3	AlcatelIND1IsisSpbAreaAddress	read-write	The three byte IS-IS Area Address to join. Normally SPB will use area 00-00-00 however if SPB is being used in conjunction with IPV4/V6 it may operate using the IS-IS area address already in use. This object is persistent. cf. ieee8021SpbSysAreaAddress
ALC alcatelIND1IsisSpbSysBridgePriority	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.7	AlcatelIND1IsisSpbBridgePriority	read-write	This is a 16 bit quantity which ranks this SPB Bridge relative to others when breaking ties. This priority is the high 16 bits of the Bridge Identifier. Its impact depends on the tie breaking algorithm. Recommend values 0..15 be assigned to core switches to ensure diversity of the ECT algorithms. cf. ieee8021SpbSysBridgePriority
alcatelIND1IsisSpbSysConfigGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.4			The collection of objects to represent Isis Spb System information
MAC alcatelIND1IsisSpbSysControlAddr	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.5	MacAddress	read-write	Group MAC that the ISIS control plane will use. SPB may use a number of different addresses for SPB Hello and LSP exchange. Section 27.2, 8.13.1.5 and Table 8-13 covers the different choices. The choices are as follows: 01-80-C2-00-00-14 = All Level 1 Intermediate Systems 01-80-C2-00-00-15 = All Level 2 Intermediate Systems 09-00-2B-00-00-05 = All Intermediate Systems. 01-80-xx-xx-xx-xx = All Provider Bridge Intermediate Systems. 01-80-yy-yy-yy-yy = All Customer Bridge Intermediate Systems. This object is persistent. cf. ieee8021SpbSysControlAddr
VLA alcatelIND1IsisSpbSysControlBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.1	VlanId	read-write	The vlan tag applied to ISIS-SPB frames.
ALC alcatelIND1IsisSpbSysDigestConvention	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.11	AlcatelIND1IsisSpbDigestConvention	read-write	The Agreement Digest convention setting off(=1)/loopFreeBoth(=2)/loopFreeMcastOnly(=3) off => disable agreement digest checking in hellos loopFreeBoth => block unsafe group and individual traffic when digests disagree. loopFreeMcastOnly =>block group traffic when digests disagree. The default is loopFreeBoth. This object is persistent. cf. ieee8021SpbSysDigestConvention
alcatelIND1IsisSpbSysGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.1			The collection of objects used to represent alcatelIND1IsisSpbSys
MAC alcatelIND1IsisSpbSysId	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.4	MacAddress	read-only	SYS ID used for all SPB instances on this bridge. A six byte network wide unique identifier. cf. ieee8021SpbSysId
STR alcatelIND1IsisSpbSysLastEnabledTime	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.17	DisplayString	read-only	Contains the sysUpTime value when alcatelIND1IsisSpbSysAdminState was last set to enabled (1) to run the IS-IS protocol.
TIM alcatelIND1IsisSpbSysLastEnabledTimeStamp	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.20	TimeStamp	read-only	Contains the sysUpTime value when alcatelIND1IsisSpbSysAdminState was last set to enabled (1) to run the IS-IS protocol.
STR alcatelIND1isisSpbSysLastSpfRun	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.18	DisplayString	read-only	Contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol.
TIM alcatelIND1isisSpbSysLastSpfRunTimeStamp	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.21	TimeStamp	read-only	Contains the sysUpTime value when the last SPF run was performed for this instance of the IS-IS protocol.
ALC alcatelIND1IsisSpbSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.6	AlcatelIND1IsisSpbSystemName	read-only	Name to be used to refer to this SPB bridge. This is advertised in IS-IS and used for management. cf. ieee8021SpbSysName
U32 alcatelIND1IsisSpbSysNumLSPs	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.19	Unsigned32	read-only	Specifies the number of LSPs in the database.
T/F alcatelIND1IsisSpbSysOverloadOnBoot	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.14	TruthValue	read-write	The value of alcatelIND1IsisSpbSysOverloadOnBoot specifies if the router should be in overload state right after the boot up process. If the alcatelIND1IsisSpbSysOverloadOnBoot is set to 'enabled' the overload timeout is maintained by alcatelIND1IsisSpbSysOverloadOnBootTimeout.
U32 alcatelIND1IsisSpbSysOverloadOnBootTimeout	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.15	Unsigned32	read-write	The value of alcatelIND1IsisSpbSysOverloadOnBootTimeout is the amount of time, in seconds for which the router operates in the overload state before attempting to reestablish normal operations when the system comes up after a fresh boot. While in overload state, this IS-IS router will only be used if the destination is only reachable via this router; it is not used for other transit traffic. The value of 0 means the router is in overload infinitely.
INT alcatelIND1IsisSpbSysOverloadStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.16	INTEGER	read-only	Indicates whether or not this isis-spb instance is in overload state. When has the value 'notInOverload', the IS-IS level is normal state. When the value is 'dynamic', the level is in the overload state because of insufficient memeory to add additional entries to the IS-IS database for this level. When the value is 'manual', the level has been put into the overload state administratively as a result of the alcatelIND1IsisSpbSysSetOverload object having been set.
U32 alcatelIND1IsisSpbSysOverloadTimeout	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.13	Unsigned32	read-write	The value of alcatelIND1IsisSpbSysOverloadTimeout is the amount of time, in seconds, the router operates in the overload state before attempting to reestablish normal operations. While in overload state, this IS-IS router will only be used if the destination is only reachable via this router; it is not used for other transit traffic. Operationally placing the router into the overload state is often used as a precursor to shutting down the IS-IS protocol operation. The value of 0 means the router is in overload infinitely.
T/F alcatelIND1IsisSpbSysSetOverload	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.12	TruthValue	read-write	Administratively set the overload bit. The overload bit will continue to be set if the implementation runs out of memory, independent of this variable.
VLA alcatelIND1IsisSpbUnicastBvlan	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.2	VlanId	not-accessible	The bvlan associated with the unicast target.
alcatelIND1IsisSpbUnicastGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.12			The collection of objects to represent Isis Spb Unicast Group SPBM information
NUM alcatelIND1IsisSpbUnicastOutboundIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.5	InterfaceIndexOrZero	read-only	Outbound interface used to reach the unicast target.
MAC alcatelIND1IsisSpbUnicastSysMac	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.3	MacAddress	not-accessible	The mac address of the bridge associated with the unicast target.
ALC alcatelIND1IsisSpbUnicastSysName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.4	AlcatelIND1IsisSpbSystemName	read-only	Name of the bridge associated with the unicast target.
alcatelIND1IsisSpbUnicastTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7		not-accessible	The unicast table. cf. show ip isis unicast-table
alcatelIND1IsisSpbUnicastTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1		not-accessible	This table can be used to display information about unicast targets.
ALC alcatelIND1IsisSpbUnicastTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.7.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
VLA alcatelIND1IsisSpbvEctStaticEntrySpvid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.4.1.4	VlanIdOrNone	read-create	If SPBV mode this is the VID originating from this bridge. Must be set = 0 if SPVID Auto-allocation is required. Otherwise in SPBM this is empty, should be set = 0. This object is persistent.
alcatelIND1IsisSpbVPNBindTableGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.14			The collection of objects to represent Isis Spb Vpn Bind Table Group SPBM information
alcatelIND1IsisSpbVPNRedistIsidTableGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.17			The collection of objects to represent Isis Spb Vpn Redist Isid Table Group SPBM information
alcatelIND1IsisSpbVPNRedistVrfTableGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.16			The collection of objects to represent Isis Spb Vpn Redist Vrf Table Group SPBM information
alcatelIND1IsisSpbVPNRouteTableGroupSPBM	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.2.1.15			The collection of objects to represent Isis Spb Vpn Route Table Group SPBM information
ALC alcatelIND1IsisSpbvSysMode	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.1.9	AlcatelIND1IsisSpbMode	read-write	Indication of supporting SPBV mode auto(=1)/manual(=2) auto => enable SPBV mode and auto allocate SPVIDs. manual => enable SPBV mode and manually assign SPVIDs. The default is auto. This object is persistent. cf. ieee8021SpbvSysMode
IP alcatelIND1SpbIPVPNBindGateway	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.4	IpAddress	not-accessible	The IP gateway to set for routes imported from GRM to ISIS-SPB.
STR alcatelIND1SpbIPVPNBindImportRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.5	SnmpAdminString	read-create	The route-map name (or empty-string for all-routes) for routes imported from GRM to ISIS-SPB.
U32 alcatelIND1SpbIPVPNBindIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.3	Unsigned32	not-accessible	The ISID to set for routes imported from GRM to ISIS-SPB.
ROW alcatelIND1SpbIPVPNBindRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.6	RowStatus	read-create	The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
alcatelIND1SpbIPVPNBindTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15		not-accessible	The table binds vrf, ISID and IP gateway together to enable route exchange between GRM and SPB-ISIS. The exchange is bidirectional. route-map only applies to VRF routes imported to ISIS from GRM. There is no filter from ISIS to GRM. cf. show spb ipvpn bind
alcatelIND1SpbIPVPNBindTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1		not-accessible	An Entry in the alcatelIND1SpbIPVPNBindTable
ALC alcatelIND1SpbIPVPNBindTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
STR alcatelIND1SpbIPVPNBindVrfName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.15.1.2	SnmpAdminString	not-accessible	The VRF for which routes are being imported from GRM to ISIS-SPB.
U32 alcatelIND1SpbIPVPNRedistIsidDestIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.3	Unsigned32	not-accessible	The destination ISID to which routes are being redistributed.
STR alcatelIND1SpbIPVPNRedistIsidRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.4	SnmpAdminString	read-create	The route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution.
ROW alcatelIND1SpbIPVPNRedistIsidRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.5	RowStatus	read-create	The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
U32 alcatelIND1SpbIPVPNRedistIsidSourceIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.2	Unsigned32	not-accessible	The source ISID from which routes are being redistributed.
alcatelIND1SpbIPVPNRedistIsidTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18		not-accessible	The IP-VPN table of configured route-redistributions where the source entity is an ISID. cf. show spb ipvpn redist
alcatelIND1SpbIPVPNRedistIsidTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1		not-accessible	An Entry in the alcatelIND1SpbIPVPNRedistIsidTable
ALC alcatelIND1SpbIPVPNRedistIsidTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.18.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
U32 alcatelIND1SpbIPVPNRedistVrfDestIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.3	Unsigned32	not-accessible	The destination ISID to which routes are being redistributed.
STR alcatelIND1SpbIPVPNRedistVrfRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.4	SnmpAdminString	read-create	The route-map name (or empty-string for all-routes) for the filter to be applied to this route-redistribution.
ROW alcatelIND1SpbIPVPNRedistVrfRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.5	RowStatus	read-create	The object indicates the status of an entry, and is used to create/delete entries. This object is persistent.
STR alcatelIND1SpbIPVPNRedistVrfSourceVrf	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.2	SnmpAdminString	not-accessible	The source VRF from which routes are being redistributed.
alcatelIND1SpbIPVPNRedistVrfTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17		not-accessible	The IP-VPN table of configured route-redistributions where the source entity is a VRF. cf. show spb ipvpn redist
alcatelIND1SpbIPVPNRedistVrfTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1		not-accessible	An Entry in the alcatelIND1SpbIPVPNRedistVrfTable
ALC alcatelIND1SpbIPVPNRedistVrfTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.17.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.
IP alcatelIND1SpbIPVPNRouteGateway	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.5	IpAddress	not-accessible	The next-hop/gateway of the IP-VPN route
U32 alcatelIND1SpbIPVPNRouteIsid	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.2	Unsigned32	not-accessible	The ISID of the IP-VPN route
U32 alcatelIND1SpbIPVPNRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.7	Unsigned32	read-only	The route-metric of the IP-VPN route
OCT alcatelIND1SpbIPVPNRouteNodeName	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.6	OCTET STRING	read-only	The BEB name of the node that advertised the IP-VPN route
IP alcatelIND1SpbIPVPNRoutePrefix	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.3	IpAddress	not-accessible	The destination prefix of the IP-VPN route
U32 alcatelIND1SpbIPVPNRoutePrefixLen	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.4	Unsigned32	not-accessible	The prefix length of the IP-VPN route
alcatelIND1SpbIPVPNRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16		not-accessible	The IP-VPN table of routes. cf. show spb ipvpn route-table
alcatelIND1SpbIPVPNRouteTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1		not-accessible	An Entry in the alcatelIND1SpbIPVPNRouteTable
ALC alcatelIND1SpbIPVPNRouteTableEntryTopIx	1.3.6.1.4.1.6486.801.1.2.1.10.17.1.1.16.1.1	AlcatelIND1IsisSpbMTID	not-accessible	The ISIS Topology Index identifier to which this instance belongs. Each Topology Index defines logical topology and is used to enable multiple SPB instances within several ISIS instances.

RFC description

Configures IS-IS routing and Shortest Path Bridging (SPB) on Alcatel-Lucent routers.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-ISIS-SPB-MIB

What Is ALCATEL-IND1-ISIS-SPB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description