ALCATEL-IND1-IP-MIB

All MIBs › ALCATEL-IND1-IP-MIB

Organization: Alcatel-Lucent

Last Updated: 2012-10-10

Category: IP and Core Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IP management MIB for interface addresses, ARP, forwarding parameters, and routing settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-IP-MIB?

ALCATEL-IND1-IP-MIB is an Alcatel-Lucent OmniSwitch proprietary IP management MIB covering interface-level IP configuration, ARP (address resolution), and basic denial-of-service protection settings. It exposes the ARP cache via alaIpNetToMediaTable (including proxy-ARP, VRRP, and authentication attributes per entry), directed-broadcast configuration, and a DoS protection table and configuration group. Operationally it is used to monitor and manage networking software state: administrators can inspect and clear the ARP cache and check DoS attack counters, helping diagnose IP-layer connectivity issues and detect attack traffic. It supplements, rather than replaces, the standard IP-MIB and IF-MIB by adding Alcatel-specific extensions such as VRRP-aware ARP entries. It is deployed on OmniSwitch Layer 3 switches/routers where administrators need vendor-specific visibility into ARP and DoS state beyond standard MIB-II, and an ALCATEL-IND1-IP-MIB download from Alcatel-Lucent's support portal lets them load it into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-IP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch Layer 3 switches/routers

Monitoring Examples

An operator would walk alaIpNetToMediaTable/alaIpNetToMediaEntry to inspect alaIpNetToMediaPhysAddress, alaIpNetToMediaVrrp, and alaIpNetToMediaProxy for a given IP, confirming whether an ARP entry is a VRRP virtual MAC or a proxy-ARP response, and could invoke alaIpClearArpCache or alaIpClearArpFilter to clear a stale or poisoned entry. Separately, polling alaDoSTable/alaDoSEntry alongside alaDoSConfig would reveal counts of detected denial-of-service patterns, flagging an active attack against the switch. A rapidly growing DoS counter combined with ARP table churn would indicate an ARP spoofing or flooding event in progress.

What Can Be Monitored

ARP (net-to-media) table entries
VRRP/proxy ARP entries
directed broadcast configuration
DoS attack counters
ARP cache clear operations

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Ip

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From IP-FORWARD-MIB

ipCidrRouteEntry

OBJECT-TYPE

From IP-MIB

ipNetToMediaEntry	OBJECT-TYPE
ipNetToMediaIfIndex	OBJECT-TYPE
ipNetToMediaNetAddress	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
PhysAddress
RowStatus
TimeStamp

How to Use in IPNetwork Monitor

Example using alaDoSArpPoisonDetected OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaDoSArpPoisonDetected into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of ARP Poison attacks detected. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alaArpPingGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.5			A collection of objects to support Notification for Arp or Ping DoS attack.
alaArpPoisonGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.6			A collection of objects to support DoS Arp Poison Table.
C32 alaDoSArpPoisonDetectedEx	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1.2	Counter32	read-only	Number of ARP Poison attacks detected.
alaDoSArpPoisonEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1		not-accessible	An entry in the alaDoSArpPoisonTable.
IP alaDoSArpPoisonIpAddr	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1.1	IpAddress	not-accessible	The IP address from which an ARP packet is considered an ARP Poison attack.
ROW alaDoSArpPoisonRowStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11.1.3	RowStatus	read-create	enable/disable ARP Poisoning for this IP
alaDoSArpPoisonTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.11		not-accessible	A list of IP addresses for which periodic ARP Requests are to be generated, and from which if an ARP Packet is received, an ARP Poison Attack is detected.
I32 alaDoSARPRate	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.9	Integer32	read-write	Rate of ARP Requests, which if exceeded, an ARP Flood attack is detected.
I32 alaDoSChassisId	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.8	Integer32	accessible-for-notify	Chassis on which recent suspect packet was received.
alaDoSConfig	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3
C32 alaDoSDetected	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.2	Counter32	accessible-for-notify	Number of attacks detected
alaDoSEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1		not-accessible	An entry in the alaDoStable
alaDoSGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.3			A collection of objects to support Notification for DoS attack.
IP alaDoSIp	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.3	IpAddress	accessible-for-notify	Source IP address from recent suspect packet.
MAC alaDoSMac	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.4	MacAddress	accessible-for-notify	Source MAC address from recent suspect packet.
I32 alaDoSPingRate	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.10	Integer32	read-write	Rate of ICMP Requests, which if exceeded, a Ping Overload attack is detected.
I32 alaDoSPort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.6	Integer32	accessible-for-notify	Port on which recent suspect packet was received.
I32 alaDoSPortScanClosePortPenalty	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.2	Integer32	read-write	Penalty points added to the total port scan penalty value when a TCP/UDP packet destinated to a closed port is received.
I32 alaDoSPortScanDecay	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.7	Integer32	read-write	Decay speed for the total port scan penalty value. The penalty value is reduced by a factor of the decay value every minute
I32 alaDoSPortScanTcpOpenPortPenalty	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.3	Integer32	read-write	Penalty points added to the total port scan penalty value when a TCP SYN/FIN packet destinated to a open TCP port is received. No difference between legal TCP packet and port scan packet.
I32 alaDoSPortScanThreshold	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.6	Integer32	read-write	Threshold port scan penalty value. If the total port scan penalty value exceeds this value, a port scan attack is recorded
I32 alaDoSPortScanTotalPenalty	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.5	Integer32	read-only	Total port scan penalty value accumulated at present time
I32 alaDoSPortScanUdpOpenPortPenalty	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.4	Integer32	read-write	Penalty points added to the total port scan penalty value when a UDP packet destinated to a open UDP port is received. No difference between legal UDP packet and port scan packet.
I32 alaDoSSlot	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.5	Integer32	accessible-for-notify	Slot on which recent suspect packet was received.
INT alaDoSStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.7	INTEGER	read-write	enable/disable DoS attack Detection
alaDoSTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1		not-accessible	Table of DoS (denial of service) attacks detected
NTF alaDoSTrap	1.3.6.1.4.1.6486.801.1.2.1.23.1.0.1			The DoS trap indicates that the sending agent has received DoS attack
INT alaDoSTrapCntl	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.8	INTEGER	read-write	Indicates whether the switch will generate SNMP traps for alaDoSTraps. 'Enabled' results in SNMP traps; 'disabled', no traps are sent.
INT alaDoSType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.3.1.1.1	INTEGER	accessible-for-notify	index field for the alaDoSTable. Note: tcpsyn, smurf, pepsi and teardropBonkBoink are deprecated.
INT alaIcmpAllMsgStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.10.1	INTEGER	read-write	Enable/disable all ICMP messages on the switch. On set operation, only enabled(1)/disabled(2) is allowed. Other(3) will be returned in get operation, if not all ICMP messages are enabled and not all ICMP messages are disabled.
alaIcmpCtrl	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.10
I32 alaIcmpCtrlCode	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.2	Integer32	read-only	ICMP message code
alaIcmpCtrlEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1		not-accessible	An entry in the alaIcmpCtrlTable
alaIcmpCtrlGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.10			A collection of objects to support management of configuration parameters of Alcatel Icmp Ctrl stack.
I32 alaIcmpCtrlPktGap	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.4	Integer32	read-write	Minimum packet gap in microseconds between the two successive ICMP messages with the same type and code
INT alaIcmpCtrlStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.3	INTEGER	read-write	enable/disable ICMP message generation
alaIcmpCtrlTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7		not-accessible	Table to control ICMP message generation from the switch.
I32 alaIcmpCtrlType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.7.1.1	Integer32	read-only	ICMP message type
alaIpArpFilterEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1		not-accessible	An entry in alaIpArpFilterTable.
alaIpArpFilterGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.12			A collection of objects to support management of configuration parameters of Alcatel Ip Arp Filter stack.
IP alaIpArpFilterIpAddr	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.1	IpAddress	not-accessible	The IP address to block ARP responses.
IP alaIpArpFilterIpMask	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.2	IpAddress	not-accessible	The IP address mask to block ARP responses.
INT alaIpArpFilterMode	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.5	INTEGER	read-create	allow/block ARP for this filter entry
ROW alaIpArpFilterRowStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.6	RowStatus	read-create	enable/disable ARP block for this IP
alaIpArpFilterTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11		not-accessible	A list of IP addresses for ARP to ignore.
INT alaIpArpFilterType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.4	INTEGER	not-accessible	This indicates which parameter of the ARP packet to filter on.
I32 alaIpArpFilterVlan	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.11.1.3	Integer32	not-accessible	Vlan for filter. 0 disablesP
alaIpCidrAugGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.9			A collection of objects to support management of configuration parameters of Alcatel IP Cidr Augmented stack.
INT alaIpClearArpCache	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1.1	INTEGER	read-write	Clear dynamic ARP entries from ARP cache.
INT alaIpClearArpFilter	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1.3	INTEGER	read-write	Clear ARP filters entries.
alaIpCompliance	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.1.1			The compliance statement for switches with Alcatel IP stack and implementing ALCATEL-IND1-IP-MIB.
alaIpConfig	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1
alaIpConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.1			A collection of objects to support management of configuration parameters of Alcatel IP stack.
TIM alaIpDhcpClientLeaseExpires	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.7	TimeStamp	read-only	DHCP IP address lease expiry time.If no DHCP client exists this object contains a zero value
TIM alaIpDhcpClientLeaseObtained	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.6	TimeStamp	read-only	DHCP IP address lease obtained time. If no DHCP client exists this object contains a zero value
alaIpDhcpHostIdentifierGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.21			A collection of objects to support display of DHCP Client details.
alaIpDhcpHostIdentifierObjects	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19
STR alaIpDhcpHostName	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.5	SnmpAdminString	read-only	DHCP Server assigned host name.
IP alaIpDhcpRouterAddress	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.4	InetAddress	read-only	DHCP Router IP address.
IPt alaIpDhcpRouterAddressType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.3	InetAddressType	read-only	DHCP Router IP address Type. Currently ipv4(1) is supported.
IP alaIpDhcpServerAddress	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.2	InetAddress	read-only	DHCP Server IP address.
IPt alaIpDhcpServerAddressType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.19.1	InetAddressType	read-only	DHCP Server IP address Type. Currently ipv4(1) is supported.
INT alaIpDirectedBroadcast	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.1.2	INTEGER	read-write	The indication of whether this router is forwarding IP directed broadcasts
INT alaIpFtpAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.16.1	INTEGER	read-write	Indicates whether the FTP service is enabled on the switch.
alaIpFtpConfig	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.16
alaIpFtpGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.17			A collection of objects to support management of ftp configuration.
I32 alaIpFtpPort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.16.2	Integer32	read-write	The user configurable TCP port for switch's ftp access. Default is 21.
IP alaIpInterfaceAddress	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.2	IpAddress	read-write	IP address for this interface.
INT alaIpInterfaceAdminState	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.4	INTEGER	read-write	Administrative state of the IP interface, independent of the state of the underlying device.
IP alaIpInterfaceBcastAddr	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.15	IpAddress	read-only	Broadcast address for this IP interface.
INT alaIpInterfaceDeviceType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.5	INTEGER	read-write	The type of device to which the IP interface is bound.
INT alaIpInterfaceDhcpIpRelease	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.24	INTEGER	read-write	To do an IP address release if dynamically assigned address
INT alaIpInterfaceDhcpIpRenew	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.25	INTEGER	read-write	To do an IP address renew if dynamically assigned address
STR alaIpInterfaceDhcpOption60String	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.26	SnmpAdminString	read-write	The value of option-60 filed that should be inserted in DHCP discover/request packet if configured.
INT alaIpInterfaceDhcpStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.23	INTEGER	read-write	DHCP status of the DHCP Client IP interface
INT alaIpInterfaceEncap	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.8	INTEGER	read-write	IP router port encapsulation.
alaIpInterfaceEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1		not-accessible	An IP interface entry.
alaIpInterfaceGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.15			A collection of objects to support management of configuration parameters of Alcatel IP Interface stack.
INT alaIpInterfaceIpForward	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.7	INTEGER	read-write	IP interface forwarding status(disabled = ip host only).
INT alaIpInterfaceLocalProxyArp	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.10	INTEGER	read-write	Local Proxy ARP status on this interface.
IP alaIpInterfaceMask	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.3	IpAddress	read-write	IP mask for this IP interface.
U32 alaIpInterfaceMtu	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.9	Unsigned32	read-write	IP interface's maximum transmission unit (MTU).
STR alaIpInterfaceName	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.1	SnmpAdminString	read-only	IP interface name.
INT alaIpInterfaceOperReason	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.13	INTEGER	read-only	The reason the operational state is down.
INT alaIpInterfaceOperState	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.12	INTEGER	read-only	Operational state of the IP interface.
INT alaIpInterfacePrimAct	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.16	INTEGER	read-only	Actual primary interface status for this interface.
INT alaIpInterfacePrimCfg	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.11	INTEGER	read-write	Primary interface configuration status for this interface. If set to true, this interface will be used as the default interface for the VLAN on which it resides when possible.
IP alaIpInterfaceRemoteAddr	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.17	IpAddress	read-write	Peer address for this IP interface.
MAC alaIpInterfaceRouterMac	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.14	MacAddress	read-only	The router MAC for this IP interface.
alaIpInterfaceTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14		not-accessible	A list of IP interfaces in this switch.
IP alaIpInterfaceTunnelDst	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.21	InetAddress	read-write	Destination network address for tunnel.
IPt alaIpInterfaceTunnelDstAddressType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.20	InetAddressType	read-write	The address type of the tunnel destination network address. Only type InetAddressIPv4 (1) is supported.
IP alaIpInterfaceTunnelSrc	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.19	InetAddress	read-write	Source network address for tunnel.
IPt alaIpInterfaceTunnelSrcAddressType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.18	InetAddressType	read-write	The address type of the tunnel source network address. Only type InetAddressIPv4 (1) is supported.
IP alaIpInterfaceVipAddress	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.22	IpAddress	read-write	Virtual IP address for this interface when part of a multi-chass configuration.
I32 alaIpInterfaceVlanID	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.14.1.6	Integer32	read-write	The VLAN to which the interface is bound; 0 if unbound.
alaIpItfConfigEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1		not-accessible	An IP interface entry.
NUM alaIpItfConfigIfIndex	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1.2	InterfaceIndexOrZero	read-create	The ifIndex for this interface. It is only a valid ifIndex value when the value for alaIpInterfaceRowStatus is active.
STR alaIpItfConfigName	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1.1	SnmpAdminString	read-only	The name for this interface.
ROW alaIpItfConfigRowStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15.1.3	RowStatus	read-create	This object is used to create a new IP interface or delete an existing interface. It should be set to createAndGo to create an entry, or destroy to delete an existing entry. A valid ifIndex value for an IP interface is allocated when a row is created in this table. The successful allocation of the ifIndex value is noted by the state of the new row becoming active.
alaIpItfConfigTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.15		not-accessible	Table used to configure a new IP interface with an IP address.
alaIpItfGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.16			A collection of objects to support management of configuration parameters of Alcatel Ip Itf stack.
alaIpNetToMediaAugGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.7			A collection of objects to support management of configuration parameters of Alcatel IP Net to Media Augmented stack.
INT alaIpNetToMediaAuth	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.4	INTEGER	read-only	Authentication VLAN ARP flags
alaIpNetToMediaEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1		not-accessible	An entry in alaIpToMediaTable.
alaIpNetToMediaGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.2			A collection of objects to support management of configuration parameters of Alcatel IP Net to Media stack.
STR alaIpNetToMediaName	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.5	SnmpAdminString	read-write	Name of the entry.
PHY alaIpNetToMediaPhysAddress	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.1	PhysAddress	read-write	The media-dependent `physical' address.
INT alaIpNetToMediaProxy	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.2	INTEGER	read-write	Proxy ARP flag
alaIpNetToMediaTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2		not-accessible	A table of ARP flags, expansion to ipNetToMediaTable.
INT alaIpNetToMediaVrrp	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.2.1.3	INTEGER	read-only	VRRP ARP flag
alaIpNotificationGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.20			Collection of notifications for IP MIB.
alaIpNtpConfig	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.20
alaIpNtpGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.22			A collection of objects to support management of ntp configuration.
STR alaIpNtpVrfName	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.20.1	SnmpAdminString	read-write	Name of the VRF used by the NTP daemon.
alaIpPortServiceEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13.1		not-accessible	An entry in alaIpPortServiceTable
I32 alaIpPortServicePort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13.1.1	Integer32	read-only	IP service port
INT alaIpPortServiceStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13.1.2	INTEGER	read-write	enable/disable IP service
alaIpPortServiceTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.13		not-accessible	Table to enable/disable IP services by port on switch
alaIpPortServiceTypeGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.14			A collection of objects to support management of configuration parameters of Alcatel Ip Port Service Type stack.
I32 alaIpRouteCount	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9.1.2	Integer32	read-only	IP route count
INT alaIpRouteProtocol	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9.1.1	INTEGER	read-only	IP route protocol
alaIpRouteSumEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9.1		not-accessible	An entry in the alaIpRouteSumTable
alaIpRouteSumGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.11			A collection of objects to support management of configuration parameters of Alcatel Ip Route Sum stack.
alaIpRouteSumTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.9		not-accessible	IP route summary table
alaIpServiceEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1		not-accessible	An entry in alaIpServiceTable
I32 alaIpServicePort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.2	Integer32	read-only	IP service port. To modify the default port, use corresponding MIB attribute below: - ftp : alaIpFtpPort from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshPort from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetPort from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http : alaIND1WebMgtHttpPort from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : can't be modified - snmp : can't be modified - https : alaIND1WebMgtHttpsPort from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib
INT alaIpServiceStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.3	INTEGER	read-write	When read, returns enabled if service and port are enabled, and returns disabled otherwise. When written, enables/disables service and port (although snmp is never fully shut down; if disabled in some VRF, it will run in the default VRF). Note that that http, https, and ntp here are read-only; use alternatives described below to enable/disable service. If you want to block packet and shut down service, use corresponding MIB attribute below: - ftp : alaIpFtpAdminStatus from alaIpFtpConfig in ALCATEL-IND1-IP-MIB.mib - ssh : alaIpSshAdminStatus from alaIpSshConfig in ALCATEL-IND1-IP-MIB.mib - telnet : alaIpTelnetAdminStatus from alaIpTelnetConfig in ALCATEL-IND1-IP-MIB.mib - http enable : alaIND1WebMgtAdminStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - http disable : alaIND1WebMgtServerStatus from alcatelIND1WebMgtMIBObjects in ALCATEL-IND1-WEBMGT-MIB.mib - ntp : alaIpNtpVrfName (in this mib), and alaNtpEnable and alaNtpBroadcastEnable from alaNtpConfig in ALCATEL-IND1-NTP-MIB.mib - snmp : [no alternative -- use this MIB object] - https : same as http
alaIpServiceTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12		not-accessible	Table to enable/disable IP services on switch
INT alaIpServiceType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.12.1.1	INTEGER	read-only	IP service type
alaIpServiceTypeGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.13			A collection of objects to support management of configuration parameters of Alcatel Ip Service Type stack.
INT alaIpSshAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17.1	INTEGER	read-write	Indicates whether the SSH service is enabled on the switch.
alaIpSshConfig	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17
alaIpSshGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.18			A collection of objects to support management of ssh configuration.
I32 alaIpSshPort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17.2	Integer32	read-write	The user configurable TCP port for switch's ssh access. Default is 22.
INT alaIpSshPubKeyEnforceAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.17.3	INTEGER	read-write	Indicates whether the Public Key Authentication is enforced on the switch.
INT alaIpTelnetAdminStatus	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.18.1	INTEGER	read-write	Indicates whether the TELNET service is enabled on the switch.
alaIpTelnetConfig	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.18
alaIpTelnetGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.19			A collection of objects to support management of telnet configuration.
I32 alaIpTelnetPort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.18.2	Integer32	read-write	The user configurable TCP port for switch's telnet access. Default is 23.
alaPktDropGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.8			A collection of objects to support Packet Drop Notification objects.
alaPortScanGroup	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2.4			A collection of objects to support Notification for Port Scan DoS attack.
alcatelIND1IPMIB	1.3.6.1.4.1.6486.801.1.2.1.23.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Propietary IP MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1IPMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.1
alcatelIND1IPMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.23.1.2
alcatelIND1IPMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.23.1.2.2
alcatelIND1IPMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.23.1.0			Branch For IP MIB Subsystem Notifications.
alcatelIND1IPMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.23.1.1
ipCidrRouteAugEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.6.1		not-accessible	An entry in ipCidrRouteAugTable.
ipCidrRouteAugTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.6		not-accessible	NI/EMP flag expansion to ipCidrRouteTable.
INT ipCidrRouteScope	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.6.1.1	INTEGER	read-only	Indicate the route is NI route or EMP route
ipNetToMediaAugEntry	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1		not-accessible	An entry in ipNetToMediaAugTable.
ipNetToMediaAugTable	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4		not-accessible	slot/port expansion to ipNetToMediaTable.
I32 ipNetToMediaChassisId	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.4	Integer32	read-write	Chassis Id associated with address translation.
STR ipNetToMediaName	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.3	SnmpAdminString	read-write	Name of the entry.
I32 ipNetToMediaPort	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.2	Integer32	read-write	Port associated with address translation. An address translation not associated with a slot/port pair will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to zero. An address associated with an Ethernet Management Port(EMP) will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to -1. An address associated with a link agg port will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to the link agg id.
I32 ipNetToMediaSlot	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.4.1.1	Integer32	read-write	Slot associated with address translation. An address translation not associated with a slot/port pair will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to zero. An address associated with an Ethernet Management Port (EMP) will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to -1. An address associated with a link agg port will have ipNetToMediaSlot equal to zero and ipNetToMediaPort equal to the link agg id.
NTF pktDrop	1.3.6.1.4.1.6486.801.1.2.1.23.1.0.2			The pktDrop trap indicates that the sending agent has dropped certain packets (to blocked IP ports, from spoofed addresses, etc).
I32 pktDropCount	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.3	Integer32	accessible-for-notify	The # of pkt drops (within a configured time interval) of this pktDropType that triggered this particular trap instance
OCT pktDropFrag	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.4	OCTET STRING	accessible-for-notify	<= 512 bytes of the dropped pkt (dsmac[12], tag[4], etype[2], payload[..512] (0 if DropCount only)
NUM pktDropIfIndex	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.2	InterfaceIndexOrZero	accessible-for-notify	Interface index (if_index) of ingress port of this dropped pkt
INT pktDropType	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5.1	INTEGER	accessible-for-notify	Reason index for why this packet was dropped
trafficEventTrapObjs	1.3.6.1.4.1.6486.801.1.2.1.23.1.1.5

RFC description

Alcatel proprietary IP routing and ARP management with DOS protection and interface configuration.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-IP-MIB