| OID symbolic | OID numeric | Type | Access | Description |
|---|
| avc | 1.3.6.1.4.1.2653.3.1 | | | |
| avcl | 1.3.6.1.4.1.2653.3.1.1 | | | |
| STR avclDeviceAssignedSpare | 1.3.6.1.4.1.2653.3.1.1.6.1.10 | AvcString | read-only | The device's global spare assignment. Can be any of the ff.:
- No Assigned Spare
- HDD #
eg. 'No Assigned Spare' or 'HDD 1' or 'HDD 2, HDD 6' |
| NUM avclDeviceComponentCount | 1.3.6.1.4.1.2653.3.1.1.6.1.50 | AvcCounter | read-only | The count of all components present in any device.
eg. 3 |
| STR avclDeviceComponentsInstanceNumber | 1.3.6.1.4.1.2653.3.1.1.6.1.53 | AvcLongString | read-only | The index number of each unique component device type.
Format of values are:
PS1 - Power Supply 1
F2 - Fan 2
e.g. 'Component 1: PS1; Component 2: F2; ......' |
| STR avclDeviceComponentsState | 1.3.6.1.4.1.2653.3.1.1.6.1.52 | AvcLongString | read-only | Contains the state of the components present in the device.
Can be one of the following:
- Normal
- Fail
- Not Available
e.g. 'Component 1: Normal; Component 2: Fail; ......' |
| STR avclDeviceComponentsType | 1.3.6.1.4.1.2653.3.1.1.6.1.51 | AvcLongString | read-only | The usage type of the component in the device.
Can be one of the ff.:
- Power Supply
- Fan
e.g. 'Component 1: Power Supply; Component 2: Fan; ......' |
| STR avclDeviceDate | 1.3.6.1.4.1.2653.3.1.1.6.1.8 | AvcString | read-only | The controller's system date of the L device.
eg. 'Mar 7, 2003' |
| NUM avclDeviceDriveCount | 1.3.6.1.4.1.2653.3.1.1.6.1.46 | AvcCounter | read-only | The count of all drives present in any device. Maximum number of
drives is 15, but can be 30 if there is an expansion.
eg. 15 |
| STR avclDeviceDrivesRaidGrpOrSpareNumber | 1.3.6.1.4.1.2653.3.1.1.6.1.49 | AvcLongString | read-only | The raid group or spare number this drive belongs.
If this is 'Not Assigned' or 'HDD does not exist',
the value is the zero-length string.
e.g. 'Drive 1: Spare 2; Drive 2: Array 1; ......' |
| STR avclDeviceDrivesState | 1.3.6.1.4.1.2653.3.1.1.6.1.47 | AvcLongString | read-only | Contains the state of the drives present in the device.
Can be one of the following:
- On Line
- Off Line
- Spare
- Not Configured
- Working Properly
- Failed or Not Attached
- Under Reconstruction
- Under Retry
- Installed
- Not Installed
- Starting Up
- Standing By
- Power Supplied to the Drive
- No Power Supplied
- Drive is Reserved
- Drive is Not Reserved
e.g. 'Drive 1: Spare; LU 2: Starting UP; ......' |
| STR avclDeviceDrivesUsageType | 1.3.6.1.4.1.2653.3.1.1.6.1.48 | AvcLongString | read-only | The usage type of the drive in the device.
Can be one of the ff.:
- In Array
- Not Assigned
- As Spare
- HDD does not exist
e.g. 'Drive 1: As Spare; Drive 2: Not Assigned; ......' |
| STR avclDeviceICFlag | 1.3.6.1.4.1.2653.3.1.1.6.1.21 | AvcString | read-only | This Instant Copy flag/status can be one of the ff.:
- Stopped
- Started
- Copy to External Device
- Copy From External Device
- Instant Copy In Progress
- Failed Due to Error
- Cancelling Instant Copy |
| STR avclDeviceICPairWWN | 1.3.6.1.4.1.2653.3.1.1.6.1.23 | AvcString | read-only | The worldwide node of the instant copy pair.
eg. '50:03:07:A8:0A:00:01:13' |
| NUM avclDeviceICProgress | 1.3.6.1.4.1.2653.3.1.1.6.1.22 | AvcCounter | read-only | This will contain the progress of the instant copy operation, in percent.
eg. 99 |
| NUM avclDeviceICSourceLU | 1.3.6.1.4.1.2653.3.1.1.6.1.19 | AvcInteger | read-only | The number of the source LU of the IC (Instant Copy) operation.
eg. 1 |
| NUM avclDeviceICTargetLU | 1.3.6.1.4.1.2653.3.1.1.6.1.20 | AvcInteger | read-only | The number of the target LU of the Instant Copy operation.
eg. 2 |
| NUM avclDeviceIndex | 1.3.6.1.4.1.2653.3.1.1.6.1.1 | AvcCounter | read-only | The index number of the L Device pertaining to this table.
eg. 1 |
| avclDeviceInformationEntry | 1.3.6.1.4.1.2653.3.1.1.6.1 | | not-accessible | |
| avclDeviceInformationTable | 1.3.6.1.4.1.2653.3.1.1.6 | | not-accessible | This group (table) provides information about the L devices that are
currently connected to the AVC-L Daemon |
| STR avclDeviceInitiatorMode | 1.3.6.1.4.1.2653.3.1.1.6.1.11 | AvcString | read-only | Shows if the device is in Initiator mode or not. Can be any of the ff.:
- Enabled
- Disabled
eg. 'Disabled' |
| STR avclDeviceInstantCopyLicense | 1.3.6.1.4.1.2653.3.1.1.6.1.12 | AvcString | read-only | Shows the license description for device Instant Copy. Can be any of the ff.:
- Permanent Instant Copy
- Temporary Instant Copy (# of days remaining)
- No License
eg. 'No License' |
| STR avclDeviceIP | 1.3.6.1.4.1.2653.3.1.1.6.1.2 | AvcString | read-only | IP address of the specific L device queried
eg. '172.16.16.190' |
| STR avclDeviceLunsToMirror | 1.3.6.1.4.1.2653.3.1.1.6.1.27 | AvcLongString | read-only | Information of all Luns to mirror. Includes:
- Source Lun
- Target Lun
- L Port Number: 0 (for FC port 0) or 1 (for FC port 1)
- Target WWN
e.g. 'LU1, LU3, 0, 50:03:07:A8:0A:00:01:13; LU2, LU4, 1, 50:03:07:A8:0A:00:00:23; ......' |
| NUM avclDeviceLuToMirrorCount | 1.3.6.1.4.1.2653.3.1.1.6.1.26 | AvcCounter | read-only | The count of all LU�s to mirror.
eg. 3 |
| STR avclDeviceManufacturer | 1.3.6.1.4.1.2653.3.1.1.6.1.4 | AvcString | read-only | The device's manufacturer name from the Inquiry command info
eg. 'ADTX' |
| STR avclDeviceMirroringLicense | 1.3.6.1.4.1.2653.3.1.1.6.1.13 | AvcString | read-only | Shows the license description for device Mirroring. Can be any of the ff.:
- Permanent Mirroring
- Temporary Mirroring (# of days remaining)
- No License
eg. 'Permanent Mirroring' |
| STR avclDeviceProductName | 1.3.6.1.4.1.2653.3.1.1.6.1.5 | AvcString | read-only | The device's product name from the Inquiry command info
eg. 'AXRR-L' |
| NUM avclDeviceRaidGrpCount | 1.3.6.1.4.1.2653.3.1.1.6.1.28 | AvcCounter | read-only | The count of all RAID groups or arrays configured in any device.
eg. 2 |
| STR avclDeviceRaidGrpsDriveCount | 1.3.6.1.4.1.2653.3.1.1.6.1.30 | AvcLongString | read-only | The number of drives included in each raid group.
e.g. 'Array 1: 5; Array 2: 3; ......' |
| STR avclDeviceRaidGrpsFreeSpace | 1.3.6.1.4.1.2653.3.1.1.6.1.35 | AvcLongString | read-only | Contains the total free space of all raid groups, in units of KB.
e.g. 'Array 1: 5,000,000; Array 2: 0; ......' |
| STR avclDeviceRaidGrpsInitReconProgress | 1.3.6.1.4.1.2653.3.1.1.6.1.34 | AvcLongString | read-only | Contains the progress, in percentage, of the initialization or
reconstruction for all raid groups undergoing such process.
e.g. 'Array 1: 17; Array 3: 85; ......' |
| STR avclDeviceRaidGrpsLuUnderSurfaceVerify | 1.3.6.1.4.1.2653.3.1.1.6.1.32 | AvcLongString | read-only | Contains the volume or LU number of all raid groups that is currently
undergoing surface verify. Display only the raid groups
that are undergoing this feature. If no raid group is undergoing
surface verify, this value is the zero-length string.
e.g. 'Array 1: LU3; Array 3: LU11; ......' |
| STR avclDeviceRaidGrpsSize | 1.3.6.1.4.1.2653.3.1.1.6.1.31 | AvcLongString | read-only | Contains the size of each raid group. Size is in units of KB.
e.g. 'Array 1: 645,620,224; Array 2: 300,000,000; ......' |
| STR avclDeviceRaidGrpsState | 1.3.6.1.4.1.2653.3.1.1.6.1.29 | AvcLongString | read-only | Contains the state of each raid group present in the device.
Can be one of the following:
- Normal mode
- Degraded mode
- Reconstruction mode
- Retry mode
- System is starting up
- System shutdown
- System is not configured
- System halt
e.g. 'Array 1: Normal mode; Array 2: System halt; ......' |
| STR avclDeviceRaidGrpsSurfaceVerifyProgress | 1.3.6.1.4.1.2653.3.1.1.6.1.33 | AvcLongString | read-only | Contains the progress, in percentage, of all raid groups undergoing
surface verify. Display only the raid groups that are undergoing
this feature. If no raid group is undergoing surface verify,
this value is the zero-length string.
e.g. 'Array 1: 10; Array 3: 98; ......' |
| NUM avclDeviceRegHostCount | 1.3.6.1.4.1.2653.3.1.1.6.1.24 | AvcCounter | read-only | The count of all registered hosts present in the device.
eg. 2 |
| STR avclDeviceRegHosts | 1.3.6.1.4.1.2653.3.1.1.6.1.25 | AvcLongString | read-only | Information of all registered hosts present in the device.
Information includes:
- Host x WWN, i.e. 50:03:07:A8:0A:00:01:13
- L Port Number: 0 (for Fibre Channel Port 0) and 1 (for Fibre Channel Port 1)
- Host x LU Conversion, i.e. LU 1 can be seen as LU 5 by this host and
LU 3 as LU1. Show only valid LU conversions out of the possible 32 conversions..
e.g. '50:03:07:A8:0A:00:01:13, 0, LU1->LU5, LU3->LU1; 50:03:07:A8:0A:00:00:23, 0, LU0->LU2, LU1->LU4, LU5->LU6, ; ......' |
| STR avclDeviceRevisionLevel | 1.3.6.1.4.1.2653.3.1.1.6.1.6 | AvcString | read-only | The revision level of the device controller's microcode/firmware from
the Inquiry command info.
eg. 'L25X' |
| STR avclDeviceSerialNumber | 1.3.6.1.4.1.2653.3.1.1.6.1.7 | AvcString | read-only | The device's serial number from the Inquiry command info.
eg. 'S000023' |
| NUM avclDeviceSpareCount | 1.3.6.1.4.1.2653.3.1.1.6.1.36 | AvcCounter | read-only | The count of all spare drives in any device.
eg. 1 |
| STR avclDeviceSparesRaidGrpNumber | 1.3.6.1.4.1.2653.3.1.1.6.1.38 | AvcLongString | read-only | Shows the raid group number to which the spare belongs.
value is 'Global' if the spare is global or does not belong to
any raid group.
e.g. 'Spare 1: 3; Spare 2: Global; ......' |
| STR avclDeviceSparesState | 1.3.6.1.4.1.2653.3.1.1.6.1.37 | AvcLongString | read-only | Contains the state of each spare drive present in the device.
Can be one of the following:
- On Line
- Off Line
- Not Configured
- Working Properly
- Failed or Not Attached
- Under Reconstruction
- Under Retry
- Installed
- Not Installed
- Starting Up
- Standing By
- Power Supplied to the Drive
- No Power Supplied
- Drive is Reserved
- Drive is Not Reserved
e.g. 'Spare 1: Under Reconstruction; Spare 2: On Line; ......' |
| STR avclDeviceSurfaceSchedMode | 1.3.6.1.4.1.2653.3.1.1.6.1.16 | AvcLongString | read-only | The mode for the scheduled surface check. Can be one of the ff:
Type:
- No Surface Verify
- Sequential Verify
- Parity Check
- Parity Re-Generation
Frequency:
- null or the value is the zero-length string
- Now
- Once A Day
- Once A Week
- Once A Month
- Always
e.g. 'Type: No Surface Verify; Frequency: ' or 'Type: Sequential Verify; Frequency: Once A Day' |
| STR avclDeviceSurfaceSchedTime | 1.3.6.1.4.1.2653.3.1.1.6.1.17 | AvcString | read-only | The time for the scheduled surface check. Can be any of the ff. description:
- null or the value is the zero-length string if there is no surface check or if always surface check.
- the time of the day if 'Once A Day'
- the day of the week and the time if 'Once A Week'
- the day of the month and the time if 'Once A Month
eg. '14:15' if Once A Day, 'Wednesday, 14:15' if Once A Week, or '24, 14:15' if Once A Month |
| NUM avclDeviceSurfaceVerifyDuration | 1.3.6.1.4.1.2653.3.1.1.6.1.18 | AvcCounter | read-only | The duration of the scheduled surface check, in minutes.
eg. 30 |
| STR avclDeviceSystemVersion | 1.3.6.1.4.1.2653.3.1.1.6.1.3 | AvcString | read-only | The device's subsystem version.
eg. '7.2' |
| STR avclDeviceTime | 1.3.6.1.4.1.2653.3.1.1.6.1.9 | AvcString | read-only | The controller's system time of the L device, in 24-hr format.
eg. '14:35' |
| NUM avclDeviceVolumeCount | 1.3.6.1.4.1.2653.3.1.1.6.1.39 | AvcCounter | read-only | The count of all volumes present in any device. Maximum number of
volumes configurable is 32. Volume/LU number starts at 0.
eg. 4 |
| STR avclDeviceVolumesInitProgress | 1.3.6.1.4.1.2653.3.1.1.6.1.44 | AvcLongString | read-only | Contains the progress, in percentage, of the initialization or
reconstruction for all volumes undergoing such process.
e.g. 'LU 1: 1; LU 2: 89; LU 3: 64;......' |
| STR avclDeviceVolumesNickname | 1.3.6.1.4.1.2653.3.1.1.6.1.45 | AvcLongString | read-only | Contains the nickname or mount point of each volume in a device.
If no nickname, the value is the zero-length string.
e.g. 'LU 1: /mnt/device/sda; LU 2: ; LU 3: /mnt/device/sdc;......' |
| STR avclDeviceVolumesRaidGrpNumber | 1.3.6.1.4.1.2653.3.1.1.6.1.41 | AvcLongString | read-only | Shows the raid group number to which the volume belongs.
e.g. 'LU 1: 2; LU 2: 2; LU 3: 1;......' |
| STR avclDeviceVolumesRaidLevel | 1.3.6.1.4.1.2653.3.1.1.6.1.42 | AvcLongString | read-only | Shows the raid level the volume is configured.
Can be any of the following:
0 - RAID 0
1 - RAID 1
5 - RAID 5
e.g. 'LU 1: 0; LU 2: 0; LU 3: 5;......' |
| STR avclDeviceVolumesSize | 1.3.6.1.4.1.2653.3.1.1.6.1.43 | AvcLongString | read-only | Shows the size of all volumes in the device, in units of KB.
e.g. 'LU 1: 1,500,000; LU 2: 7,000,000; LU 3: 15,000,000;......' |
| STR avclDeviceVolumesState | 1.3.6.1.4.1.2653.3.1.1.6.1.40 | AvcLongString | read-only | Contains the state of volumes present in the device.
Can be one of the following:
- Initialization Completed
- Required
- Initialization In Progress
- LUN Failed
- LUN Not Configured
- Format Required
- Format In Progress
e.g. 'LU 1: LUN Failed; LU 2: Format Required; ......' |
| STR avclDeviceWWNInfo | 1.3.6.1.4.1.2653.3.1.1.6.1.15 | AvcString | read-only | All WWN Information present in the device.
First Controller WWN Information to be returned is that of Primary Controller, followed
by Secondary Controller, and so on. F/O (Fail Over) Mode can be either 'Independent WWN'
or 'Fail Over On Primary WWN'
e.g. '50:03:07:A8:0A:00:01:13, F/O Mode: Independent WWN; 50:03:07:A8:0A:00:00:23, ....; ......' |
| NUM avclDeviceWWNInfoCount | 1.3.6.1.4.1.2653.3.1.1.6.1.14 | AvcCounter | read-only | The count/number of WWN Information present in the device.
eg. 1 |
| STR avclEventInfo | 1.3.6.1.4.1.2653.3.1.1.5 | AvcLongString | read-only | This object will show the most recently sent 'critical' event or trap.
Events/Traps can be sent by the AVC-L Daemon if SNMP notification is enabled
in the Daemon's configuration file. This file can be configured thru the
AVC-L Client. Value can be one of the following phrases:
'xxx Serial Number: yyy ADTX ArrayMasStor IP zzz device not accessible.'
- this means that the device is disconnected, accidental or otherwise,
and needs to be reconnected.
'xxx Serial Number: yyy IP zzz Array nn: sss ==> Exposed.'
'xxx Serial Number: yyy IP zzz Array nn: sss ==> Invalidated Protected Space.'
- where:
nn - array number
sss - any status other than either 'Exposed' or 'Invalidated Protected Space'
This means that the array's status changed to fail. Contact support.
'xxx Serial Number: yyy IP zzz Array nn Lun mm: sss ==> Data Lost.'
'xxx Serial Number: yyy IP zzz Array nn Lun mm: sss ==> Exposed.'
- where:
nn - array number
mm - lun number
sss - any status other than either 'Data Lost' or 'Exposed'
This means that the lun's status changed to fail. Contact support.
'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Failed.'
'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Offline.'
'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Missing.'
'xxx Serial Number: yyy IP zzz Spare ll: sss ==> Blank.'
- where:
ll - spare number
sss - any status other than either 'Failed', 'Offline', 'Missing', or 'Blank'
This means that the spare's status changed to fail. Contact support.
'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Failed.'
'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Offline.'
'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Missing.'
'xxx Serial Number: yyy IP zzz Disk kk: sss ==> Blank.'
- where:
kk - disk/hdd number
sss - any status other than either 'Failed', 'Offline', 'Missing', or 'Blank'
This means that the disk's status changed to fail. Contact support.
'xxx Serial Number: yyy IP zzz Component jj: sss ==> Broken.'
'xxx Serial Number: yyy IP zzz Component jj: sss ==> Not Available.'
- where:
jj - disk/hdd number
sss - any status other than either 'Broken' or 'Not Available'
This means that the component's status changed to fail. Contact support.
'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: abnormally ended.'
'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: terminated due to power off.'
'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: source size greater than destination.'
'xxx Serial Number: yyy (ArrayMasStor) IP zzz Instant Copy LU ii to LU hh: actual source size is lesser than specified size.'
- where:
ii - source lun
hh - target lun
This means that the instant copy failed and the data on target lun may be
corrupted. Contact support.
where:
xxx - 'avcdaemon' or 'AVC Monitor Daemon - WinNT'
yyy - serial number of the device concerned, eg. 'S000023'
zzz - the IP address of the device concerned, eg. '172.16.16.190'
The above event values are only for the critical events. There are other events that
are more for informational purposes only. |
| STR avclHost | 1.3.6.1.4.1.2653.3.1.1.3 | AvcString | read-only | The IP address or hostname of the system where the AVC-L daemon resides.
eg. '172.16.16.204' |
| NUM avclNumOfDevices | 1.3.6.1.4.1.2653.3.1.1.4 | AvcCounter | read-only | The number of L devices that the AVC-L Daemon is currently connected.
eg. 2 |
| STR avclOS | 1.3.6.1.4.1.2653.3.1.1.2 | AvcString | read-only | The Operating System of where the AVC-L Daemon resides.
eg. 'Windows 2000 (Service Pack 3)' |
| STR avclVersion | 1.3.6.1.4.1.2653.3.1.1.1 | AvcString | read-only | The software version of AVC-L basing on the Daemon as the data
gathered is based on it.
eg. '4.0' |
| NTF daemonEvent | 1.3.6.1.4.1.2653.0.1 | | | This trap is sent if SNMP notification is enabled for any or all of the critical (needs troubleshooting) events described at 'avclEventInfo' above. There are other events but are categorized as status-changed events that don't need troubleshooting, just for informational purposes. |
