ADTRAN-HSU600-MIB

All MIBs › ADTRAN-HSU600-MIB

Category: Vendor: ADTRAN

Description: Manages the ADTRAN HSU 600 High Speed Serial Unit for serial WAN interface configuration and monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADTRAN-HSU600-MIB?

ADTRAN-HSU600-MIB is an ADTRAN enterprise MIB for the HSU 600 High-Speed Serial Unit, a device used to provide and manage serial WAN interfaces, historically for connecting routers or DSU/CSU-style equipment to a T1 or other digital circuit. It exposes device configuration and control objects including system time/date, passcode/access control, T1 mapping, and remote maintenance actions such as reset, reboot, and cancel-tests. Its monitoring/management value covers both configuration state and operational control: confirming the unit's clock (adHSU600time/date) is correct, verifying T1 channel mapping (adHSU600T1Map), and being able to remotely reboot or reset performance-monitoring counters (adHSU600resetPM) when troubleshooting the WAN link. Being an ADTRAN-specific serial-unit MIB, it likely complements standard DS1/T1 MIBs (e.g. RFC 3895 DS1/E1-MIB) for the underlying circuit's physical-layer statistics. It is deployed on WAN edge sites where an ADTRAN HSU 600 provides high-speed serial connectivity, such as remote branch offices or telco access points. Engineers can download the ADTRAN-HSU600-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADTRAN-HSU600-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADTRAN HSU 600 High-Speed Serial Unit

Monitoring Examples

An admin would check adHSU600T1Map to confirm the T1 channel mapping matches the provisioned circuit, and adHSU600time/adHSU600date to ensure the device clock (used for event logging) is accurate. Issuing adHSU600resetPM would clear performance-monitoring counters after a known circuit event, and adHSU600CancelTests would be used to abort an in-progress diagnostic loopback test; an unexpected adHSU600reboot event correlating with a WAN outage would point to the HSU 600 itself rather than the carrier circuit as the fault source.

What Can Be Monitored

T1 channel mapping
system time/date
performance-monitor counter reset state
diagnostic test status
reboot/reset events

Imported Objects

From ADTRAN-MIB

adProdPhysAddress

OBJECT-TYPE

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString
ifIndex

From RFC1406-MIB

dsx1LineStatus

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
adtran	1.3.6.1.4.1.664
adProducts	1.3.6.1.4.1.664.1
adHSU600	1.3.6.1.4.1.664.1.33
NTF adHSU600NoAlarm	1.3.6.1.4.1.664.1.33.0.3301			This trap indicates that a change in the alarm state has occurred.
NTF adHSU600RxYellow	1.3.6.1.4.1.664.1.33.0.3302			This trap indicates that a change in the received yellow alarm state has occurred.
NTF adHSU600TxYellow	1.3.6.1.4.1.664.1.33.0.3303			This trap indicates that a change in the transmit yellow alarm state has occurred.
NTF adHSU600RxAIS	1.3.6.1.4.1.664.1.33.0.3304			This trap indicates that a change in the received alarm indication signal (AIS) state has occurred.
NTF adHSU600TxAIS	1.3.6.1.4.1.664.1.33.0.3305			This trap indicates that a change in the transmit alarm indication signal (AIS) state has occurred.
NTF adHSU600RedAlarm	1.3.6.1.4.1.664.1.33.0.3306			This trap indicates that a change in the red alarm state has occurred.
NTF adHSU600LOS	1.3.6.1.4.1.664.1.33.0.3307			This trap indicates that a change in the loss of signal state has occurred.
NTF adHSU600Loopback	1.3.6.1.4.1.664.1.33.0.3308			This trap indicates that a change in the loopback state has occurred.
NTF adHSU600CurrentES	1.3.6.1.4.1.664.1.33.0.3317			This trap indicates that the current interval errored second threshold has been exceeded.
NTF adHSU600CurrentSES	1.3.6.1.4.1.664.1.33.0.3318			This trap indicates that the current interval severely errored second threshold has been exceeded.
NTF adHSU600CurrentSEFS	1.3.6.1.4.1.664.1.33.0.3319			This trap indicates that the current interval severely errored framing second threshold has been exceeded.
NTF adHSU600CurrentUAS	1.3.6.1.4.1.664.1.33.0.3320			This trap indicates that the current interval unavailable second threshold has been exceeded.
NTF adHSU600CurrentCSS	1.3.6.1.4.1.664.1.33.0.3321			This trap indicates that the current interval controlled slip second threshold has been exceeded.
NTF adHSU600CurrentPCV	1.3.6.1.4.1.664.1.33.0.3322			This trap indicates that the current interval path coding violations threshold has been exceeded.
NTF adHSU600CurrentLES	1.3.6.1.4.1.664.1.33.0.3323			This trap indicates that the current interval line errored second threshold has been exceeded.
NTF adHSU600CurrentLCV	1.3.6.1.4.1.664.1.33.0.3326			This trap indicates that the current interval line code violations threshold has been exceeded.
NTF adHSU600TotalES	1.3.6.1.4.1.664.1.33.0.3333			This trap indicates that the total errored second threshold has been exceeded.
NTF adHSU600TotalSES	1.3.6.1.4.1.664.1.33.0.3334			This trap indicates that the total severely errored second threshold has been exceeded.
NTF adHSU600TotalSEFS	1.3.6.1.4.1.664.1.33.0.3335			This trap indicates that the total severely errored framing second threshold has been exceeded.
NTF adHSU600TotalUAS	1.3.6.1.4.1.664.1.33.0.3336			This trap indicates that the total unavailable second threshold has been exceeded.
NTF adHSU600TotalCSS	1.3.6.1.4.1.664.1.33.0.3337			This trap indicates that the total controlled slip second threshold has been exceeded.
NTF adHSU600TotalPCV	1.3.6.1.4.1.664.1.33.0.3338			This trap indicates that the total path coding violations threshold has been exceeded.
NTF adHSU600TotalLES	1.3.6.1.4.1.664.1.33.0.3339			This trap indicates that the total line errored second threshold has been exceeded.
NTF adHSU600TotalLCV	1.3.6.1.4.1.664.1.33.0.3342			This trap indicates that the total line code violations threshold has been exceeded.
NTF adHSU600DbuActivated	1.3.6.1.4.1.664.1.33.0.3349			This trap indicates that a Dial Backup Connection has been activated.
NTF adHSU600DbuTerminated	1.3.6.1.4.1.664.1.33.0.3350			This trap indicates that a Dial Backup Connection has been terminated.
adMgmt	1.3.6.1.4.1.664.2
adHSU600mg	1.3.6.1.4.1.664.2.33
adHSU600config	1.3.6.1.4.1.664.2.33.1
STR adHSU600passcode	1.3.6.1.4.1.664.2.33.1.1	DisplayString	read-only	The password string used for authentication of SNMP messages between proxy agent and the HSU600.
STR adHSU600time	1.3.6.1.4.1.664.2.33.1.2	DisplayString	read-write	The current HSU600 time value. A sequence of ASCII characters encoded as HHMMSS.
STR adHSU600date	1.3.6.1.4.1.664.2.33.1.3	DisplayString	read-write	The current HSU600 date value. A sequence of ASCII characters encoded as MMDDYY.
INT adHSU600resetPM	1.3.6.1.4.1.664.2.33.1.4	INTEGER	read-write	A set will reset Performance Monitoring DS1 statistic counters in the HSU600.
STR adHSU600phone	1.3.6.1.4.1.664.2.33.1.5	DisplayString	read-write	The dial string (phone number) to reach the network manager.
STR adHSU600init	1.3.6.1.4.1.664.2.33.1.6	DisplayString	read-write	The modem init string used by the HSU600.
INT adHSU600reboot	1.3.6.1.4.1.664.2.33.1.7	INTEGER	read-write	A set will reboot the HSU-600.
INT adHSU600CancelTests	1.3.6.1.4.1.664.2.33.1.8	INTEGER	read-write	A set will cancel all tests modes on the HSU-600.
INT adHSU600T1Map	1.3.6.1.4.1.664.2.33.1.9	INTEGER	read-write	The currently active T1 Map.
INT adHSU600id	1.3.6.1.4.1.664.2.33.1.10	INTEGER	read-only	The unit identification number for the HSU600.
INT adHSU600Trap	1.3.6.1.4.1.664.2.33.1.11	INTEGER	read-write	Overall trap enable/disable.
INT adHSU600Access	1.3.6.1.4.1.664.2.33.1.12	INTEGER	read-write	Method by which unit sends traps.

RFC description

ADTRAN HSU600 HDSL CSU/DSU configuration management with module slots and performance monitoring.

Start monitoring ADTRAN HSU 600 High-Speed Serial Unit (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADTRAN-HSU600-MIB

What Is ADTRAN-HSU600-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description