AC-PM-SYSTEM-MIB

All MIBs › AC-PM-SYSTEM-MIB

Organization: AudioCodes Ltd

Last Updated: 2009-05-04

Category: Device Management, Vendor: AudioCodes

Description: Tracks system-level performance metrics on AudioCodes devices, such as CPU utilization, memory usage, process health, and platform resource counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AC-PM-SYSTEM-MIB?

AC-PM-System MIB is an AudioCodes performance-monitoring module covering system-level elements of AudioCodes devices, again structured as a Configuration subtree (interval length and thresholds) and a Data subtree (monitored tables). It exposes system-wide performance data such as CPU utilization, memory usage, process health, and other platform resource counters sampled over the configured interval. This is squarely a hardware/software status MIB: CPU and memory counters reveal whether the processor or memory is under load or nearing exhaustion, and process-health counters indicate whether critical internal services are running normally. It belongs to the same AudioCodes performance MIB family as AC-PM-MEDIASERVER-MIB and AC-PERF-MEDIA-SERVICES-MIB and shares their interval/threshold configuration conventions. It is deployed across AudioCodes Mediant gateway and media server platforms as the primary means of tracking overall system resource health through the AC-PM-SYSTEM-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in AC-PM-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

AudioCodes VoIP gateway
AudioCodes media server

Monitoring Examples

An administrator polls the Data subtree's CPU-utilization and memory-usage counters at the configured interval to build a load trend for the device, and sets thresholds in the Configuration subtree so CPU utilization crossing, say, 90% raises an alert. As with the related AC-PM MIBs, a returned value of -1 means the interval hasn't completed and must not be read as a zero reading. Sustained high CPU or memory utilization detected through this MIB typically precedes call-processing delays or dropped sessions on the gateway.

What Can Be Monitored

CPU utilization
memory usage
process health status
platform resource counters
measurement interval/threshold configuration

Imported Objects

From AUDIOCODES-TYPES-MIB

acBoardMibs	OBJECT-IDENTITY
acGeneric	OBJECT-IDENTITY
acPerformance	OBJECT-IDENTITY
acProducts	OBJECT-IDENTITY
acRegistrations	OBJECT-IDENTITY
audioCodes	OBJECT-IDENTITY

From RFC1155-SMI

IpAddress

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
Unsigned32
enterprises

From SNMPv2-TC

DateAndTime
DisplayString
TAddress
TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using acPMNetConnectionStateChanges OID:

Select an AudioCodes Mediant-series gateways/media server as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type acPMNetConnectionStateChanges into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of times the state was toggled. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
acPMSystem	1.3.6.1.4.1.5003.10.11			The AC-PM-System MIB offers performance monitoring For the System related elements in Audiocodes' devices. The Configuration sub-tree is for configuring the interval Period length for the entire AC-PM-System MIB, and the different tables' thresholds. The Data sub-tree presents the tables of monitored elements. Note - for the entire MIB the value (-1) means the value Asked for is either not supported or currently not relevant (this is for when values asked for are for intervals not yet recorded.
acPMSystemConfiguration	1.3.6.1.4.1.5003.10.11.1
U32 acPMSystemConfigurationPeriodLength	1.3.6.1.4.1.5003.10.11.1.1	Unsigned32	read-write	Length of monitoring intervals for entire MIB.Time is in minutes.
INT acPMSystemConfigurationResetTotalCounters	1.3.6.1.4.1.5003.10.11.1.2	INTEGER	read-write	Total-Counters Reset. To reset the total counters, set the value of this object to resetTotalCounters(2).
acPMNetConnectionAttributes	1.3.6.1.4.1.5003.10.11.1.31
U32 acPMNetConnectionAttributesStateHighThreshold	1.3.6.1.4.1.5003.10.11.1.31.1	Unsigned32	read-write	High threshold.
U32 acPMNetConnectionAttributesStateLowThreshold	1.3.6.1.4.1.5003.10.11.1.31.2	Unsigned32	read-write	Low threshold.
acPMNetAttributes	1.3.6.1.4.1.5003.10.11.1.32
U32 acPMNetAttributesUnknownUDPPortCounterHighThreshold	1.3.6.1.4.1.5003.10.11.1.32.1	Unsigned32	read-write	High threshold.
U32 acPMNetAttributesUnknownUDPPortCounterLowThreshold	1.3.6.1.4.1.5003.10.11.1.32.2	Unsigned32	read-write	Low threshold.
acPMNetUtilsAttributes	1.3.6.1.4.1.5003.10.11.1.33
U32 acPMNetUtilsAttributesKBytesHighThreshold	1.3.6.1.4.1.5003.10.11.1.33.1	Unsigned32	read-write	High threshold.
U32 acPMNetUtilsAttributesKBytesLowThreshold	1.3.6.1.4.1.5003.10.11.1.33.2	Unsigned32	read-write	Low threshold.
U32 acPMNetUtilsAttributesPacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.33.3	Unsigned32	read-write	High threshold.
U32 acPMNetUtilsAttributesPacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.33.4	Unsigned32	read-write	Low threshold.
U32 acPMNetUtilsAttributesDiscardedPacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.33.5	Unsigned32	read-write	High threshold.
U32 acPMNetUtilsAttributesDiscardedPacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.33.6	Unsigned32	read-write	Low threshold.
acPMNetworkAttributes	1.3.6.1.4.1.5003.10.11.1.34
U32 acPMNetworkAttributesDhcpResponseTimeHighThreshold	1.3.6.1.4.1.5003.10.11.1.34.1	Unsigned32	read-write	High threshold.
U32 acPMNetworkAttributesDhcpResponseTimeLowThreshold	1.3.6.1.4.1.5003.10.11.1.34.2	Unsigned32	read-write	Low threshold.
acPMCongestionAttributes	1.3.6.1.4.1.5003.10.11.1.35
U32 acPMCongestionAttributesHighThreshold	1.3.6.1.4.1.5003.10.11.1.35.1	Unsigned32	read-write	High threshold.
U32 acPMCongestionAttributesLowThreshold	1.3.6.1.4.1.5003.10.11.1.35.2	Unsigned32	read-write	Low threshold.
acPMNFSAttributes	1.3.6.1.4.1.5003.10.11.1.36
U32 acPMNFSAttributesRoundTripTimeMsHighThreshold	1.3.6.1.4.1.5003.10.11.1.36.1	Unsigned32	read-write	High threshold.
U32 acPMNFSAttributesRoundTripTimeMsLowThreshold	1.3.6.1.4.1.5003.10.11.1.36.2	Unsigned32	read-write	Low threshold.
U32 acPMNFSAttributesRetriesHighThreshold	1.3.6.1.4.1.5003.10.11.1.36.3	Unsigned32	read-write	High threshold.
U32 acPMNFSAttributesRetriesLowThreshold	1.3.6.1.4.1.5003.10.11.1.36.4	Unsigned32	read-write	Low threshold.
U32 acPMNFSAttributesAbortDueToMaxRetriesExceededHighThreshold	1.3.6.1.4.1.5003.10.11.1.36.5	Unsigned32	read-write	High threshold.
U32 acPMNFSAttributesAbortDueToMaxRetriesExceededLowThreshold	1.3.6.1.4.1.5003.10.11.1.36.6	Unsigned32	read-write	Low threshold.
U32 acPMNFSAttributesDelayedResponsesHighThreshold	1.3.6.1.4.1.5003.10.11.1.36.7	Unsigned32	read-write	High threshold.
U32 acPMNFSAttributesDelayedResponsesLowThreshold	1.3.6.1.4.1.5003.10.11.1.36.8	Unsigned32	read-write	Low threshold.
U32 acPMNFSAttributesBytesDroppedOnRecordHighThreshold	1.3.6.1.4.1.5003.10.11.1.36.9	Unsigned32	read-write	High threshold.
U32 acPMNFSAttributesBytesDroppedOnRecordLowThreshold	1.3.6.1.4.1.5003.10.11.1.36.10	Unsigned32	read-write	Low threshold.
acPMMSBGAttributes	1.3.6.1.4.1.5003.10.11.1.37
U32 acPMMSBGAttributesRXGoodOctetsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.1	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXGoodOctetsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.2	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesRXBadOctetsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.3	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXBadOctetsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.4	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesRXUndersizePacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.5	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXUndersizePacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.6	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesRXOversizePacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.7	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXOversizePacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.8	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesRXMacErrorsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.9	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXMacErrorsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.10	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesRXFCSErroredPacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.11	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXFCSErroredPacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.12	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesRXDiscardPacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.13	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesRXDiscardPacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.14	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesTXOctetsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.15	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesTXOctetsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.16	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesTXPacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.17	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesTXPacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.18	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesTXCollisionsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.19	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesTXCollisionsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.20	Unsigned32	read-write	Low threshold.
U32 acPMMSBGAttributesTXLatePacketsHighThreshold	1.3.6.1.4.1.5003.10.11.1.37.21	Unsigned32	read-write	High threshold.
U32 acPMMSBGAttributesTXLatePacketsLowThreshold	1.3.6.1.4.1.5003.10.11.1.37.22	Unsigned32	read-write	Low threshold.
acPMSystemData	1.3.6.1.4.1.5003.10.11.2
U32 acPMSystemDataAcPMSystemTimeFromStartOfInterval	1.3.6.1.4.1.5003.10.11.2.1	Unsigned32	read-only	The time in seconds since the start of the current interval. MIB specific.
acPMNetConnectionStateTable	1.3.6.1.4.1.5003.10.11.2.21		not-accessible	IP connection activity indicator.
acPMNetConnectionStateEntry	1.3.6.1.4.1.5003.10.11.2.21.1		not-accessible
U32 acPMNetConnectionStateInterval	1.3.6.1.4.1.5003.10.11.2.21.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNetConnectionStateChangesEx	1.3.6.1.4.1.5003.10.11.2.21.1.2	Counter32	read-only	Number of times the state was toggled.
I32 acPMNetConnectionStateActiveTime	1.3.6.1.4.1.5003.10.11.2.21.1.3	Integer32	read-only	Percent of interval time for which the conection is active.
acPMNetUnknownUDPPortCounterTable	1.3.6.1.4.1.5003.10.11.2.22		not-accessible	Counts the number of packets discarded due to unknown UDP port, in the reporting interval.
acPMNetUnknownUDPPortCounterEntry	1.3.6.1.4.1.5003.10.11.2.22.1		not-accessible
U32 acPMNetUnknownUDPPortCounterInterval	1.3.6.1.4.1.5003.10.11.2.22.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNetUnknownUDPPortCounterVal	1.3.6.1.4.1.5003.10.11.2.22.1.2	Counter32	read-only	Value of gauge or counter.
acPMSystemNetUtils	1.3.6.1.4.1.5003.10.11.2.31
acPMNetUtilKBytesTable	1.3.6.1.4.1.5003.10.11.2.31.1		not-accessible	Network interface transmit/receive kilobytes per second (index: 0=transmit, 1=receive)
acPMNetUtilKBytesEntry	1.3.6.1.4.1.5003.10.11.2.31.1.1		not-accessible
INT acPMNetUtilKBytesDirection	1.3.6.1.4.1.5003.10.11.2.31.1.1.1	INTEGER	not-accessible	Direction of network. 0 - transmit. 1 - receive.
U32 acPMNetUtilKBytesInterval	1.3.6.1.4.1.5003.10.11.2.31.1.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNetUtilKBytesVal	1.3.6.1.4.1.5003.10.11.2.31.1.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMNetUtilKBytesAverage	1.3.6.1.4.1.5003.10.11.2.31.1.1.4	Integer32	read-only	Average value within the period time.
I32 acPMNetUtilKBytesMax	1.3.6.1.4.1.5003.10.11.2.31.1.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMNetUtilKBytesMin	1.3.6.1.4.1.5003.10.11.2.31.1.1.6	Integer32	read-only	Minimum value within the period time.
C32 acPMNetUtilKBytesVolume	1.3.6.1.4.1.5003.10.11.2.31.1.1.7	Counter32	read-only	Activity volume.
I32 acPMNetUtilKBytesTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.31.1.1.8	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNetUtilKBytesTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.31.1.1.9	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNetUtilKBytesTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.31.1.1.10	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNetUtilKBytesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.31.1.1.11	Integer32	read-only	The average of full 24 hours.
I32 acPMNetUtilKBytesTotal	1.3.6.1.4.1.5003.10.11.2.31.1.1.12	Integer32	read-only	Total since last reset.
acPMNetUtilPacketsTable	1.3.6.1.4.1.5003.10.11.2.31.2		not-accessible	Network interface transmit/receive packets per second (index: 0=transmit, 1=receive)
acPMNetUtilPacketsEntry	1.3.6.1.4.1.5003.10.11.2.31.2.1		not-accessible
INT acPMNetUtilPacketsDirection	1.3.6.1.4.1.5003.10.11.2.31.2.1.1	INTEGER	not-accessible	Direction of network. 0 - transmit. 1 - receive.
U32 acPMNetUtilPacketsInterval	1.3.6.1.4.1.5003.10.11.2.31.2.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNetUtilPacketsVal	1.3.6.1.4.1.5003.10.11.2.31.2.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMNetUtilPacketsAverage	1.3.6.1.4.1.5003.10.11.2.31.2.1.4	Integer32	read-only	Average value with in the period time.
I32 acPMNetUtilPacketsMax	1.3.6.1.4.1.5003.10.11.2.31.2.1.5	Integer32	read-only	Maximum value with in the period time.
I32 acPMNetUtilPacketsMin	1.3.6.1.4.1.5003.10.11.2.31.2.1.6	Integer32	read-only	Minimum value with in the period time.
C32 acPMNetUtilPacketsVolume	1.3.6.1.4.1.5003.10.11.2.31.2.1.7	Counter32	read-only	Activity volume.
I32 acPMNetUtilPacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.31.2.1.8	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNetUtilPacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.31.2.1.9	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNetUtilPacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.31.2.1.10	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNetUtilPacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.31.2.1.11	Integer32	read-only	The average of full 24 hours.
I32 acPMNetUtilPacketsTotal	1.3.6.1.4.1.5003.10.11.2.31.2.1.12	Integer32	read-only	Total since last reset.
acPMNetUtilDiscardedPacketsTable	1.3.6.1.4.1.5003.10.11.2.31.3		not-accessible	Counts the number of packets discarded in the reporting interval.
acPMNetUtilDiscardedPacketsEntry	1.3.6.1.4.1.5003.10.11.2.31.3.1		not-accessible
U32 acPMNetUtilDiscardedPacketsInterval	1.3.6.1.4.1.5003.10.11.2.31.3.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNetUtilDiscardedPacketsVal	1.3.6.1.4.1.5003.10.11.2.31.3.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMNetUtilDiscardedPacketsTotal	1.3.6.1.4.1.5003.10.11.2.31.3.1.3	Integer32	read-only	Total since last reset.
acPMSystemNetwork	1.3.6.1.4.1.5003.10.11.2.41
acPMDhcpResponseTimeTable	1.3.6.1.4.1.5003.10.11.2.41.1		not-accessible	DHCP response time, in seconds (from request to response)
acPMDhcpResponseTimeEntry	1.3.6.1.4.1.5003.10.11.2.41.1.1		not-accessible
U32 acPMDhcpResponseTimeInterval	1.3.6.1.4.1.5003.10.11.2.41.1.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMDhcpResponseTimeVal	1.3.6.1.4.1.5003.10.11.2.41.1.1.2	Gauge32	read-only	Value of gauge or counter.
I32 acPMDhcpResponseTimeAverage	1.3.6.1.4.1.5003.10.11.2.41.1.1.3	Integer32	read-only	Average value with in the period time.
I32 acPMDhcpResponseTimeMax	1.3.6.1.4.1.5003.10.11.2.41.1.1.4	Integer32	read-only	Maximum value with in the period time.
I32 acPMDhcpResponseTimeMin	1.3.6.1.4.1.5003.10.11.2.41.1.1.5	Integer32	read-only	Minimum value with in the period time.
C32 acPMDhcpResponseTimeVolume	1.3.6.1.4.1.5003.10.11.2.41.1.1.6	Counter32	read-only	Activity volume.
I32 acPMDhcpResponseTimeTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.41.1.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMDhcpResponseTimeTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.41.1.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMDhcpResponseTimeTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.41.1.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMDhcpResponseTimeFullDayAverage	1.3.6.1.4.1.5003.10.11.2.41.1.1.10	Integer32	read-only	The average of full 24 hours.
acPMDhcpRequestTable	1.3.6.1.4.1.5003.10.11.2.41.2		not-accessible	Number of DHCP requests sent.
acPMDhcpRequestEntry	1.3.6.1.4.1.5003.10.11.2.41.2.1		not-accessible
U32 acPMDhcpRequestInterval	1.3.6.1.4.1.5003.10.11.2.41.2.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMDhcpRequestVal	1.3.6.1.4.1.5003.10.11.2.41.2.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMDhcpRequestTotal	1.3.6.1.4.1.5003.10.11.2.41.2.1.3	Integer32	read-only	Total since last reset.
acPMStunQueryTable	1.3.6.1.4.1.5003.10.11.2.41.3		not-accessible	Number of queries sent to STUN server.
acPMStunQueryEntry	1.3.6.1.4.1.5003.10.11.2.41.3.1		not-accessible
U32 acPMStunQueryInterval	1.3.6.1.4.1.5003.10.11.2.41.3.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMStunQueryVal	1.3.6.1.4.1.5003.10.11.2.41.3.1.2	Counter32	read-only	Value of gauge or counter.
acPMStunDiscoveryTable	1.3.6.1.4.1.5003.10.11.2.41.4		not-accessible	Number of STUN discover operations.
acPMStunDiscoveryEntry	1.3.6.1.4.1.5003.10.11.2.41.4.1		not-accessible
U32 acPMStunDiscoveryInterval	1.3.6.1.4.1.5003.10.11.2.41.4.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMStunDiscoveryVal	1.3.6.1.4.1.5003.10.11.2.41.4.1.2	Counter32	read-only	Value of gauge or counter.
acPMStunRetransmissionTable	1.3.6.1.4.1.5003.10.11.2.41.5		not-accessible	Number of STUN query retransmissions.
acPMStunRetransmissionEntry	1.3.6.1.4.1.5003.10.11.2.41.5.1		not-accessible
U32 acPMStunRetransmissionInterval	1.3.6.1.4.1.5003.10.11.2.41.5.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMStunRetransmissionVal	1.3.6.1.4.1.5003.10.11.2.41.5.1.2	Counter32	read-only	Value of gauge or counter.
acPMSystemSctp	1.3.6.1.4.1.5003.10.11.2.51
acPMSctpRcvBytesLastSecondTable	1.3.6.1.4.1.5003.10.11.2.51.1		not-accessible	Number of SCTP bytes received in the last second.
acPMSctpRcvBytesLastSecondEntry	1.3.6.1.4.1.5003.10.11.2.51.1.1		not-accessible
U32 acPMSctpRcvBytesLastSecondInterval	1.3.6.1.4.1.5003.10.11.2.51.1.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMSctpRcvBytesLastSecondVal	1.3.6.1.4.1.5003.10.11.2.51.1.1.2	Gauge32	read-only	Value of gauge or counter.
I32 acPMSctpRcvBytesLastSecondAverage	1.3.6.1.4.1.5003.10.11.2.51.1.1.3	Integer32	read-only	Average value within the period time.
I32 acPMSctpRcvBytesLastSecondMax	1.3.6.1.4.1.5003.10.11.2.51.1.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMSctpRcvBytesLastSecondMin	1.3.6.1.4.1.5003.10.11.2.51.1.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMSctpRcvBytesLastSecondFullDayAverage	1.3.6.1.4.1.5003.10.11.2.51.1.1.6	Integer32	read-only	The average of full 24 hours.
acPMSctpSentBytesLastSecondTable	1.3.6.1.4.1.5003.10.11.2.51.2		not-accessible	Number of SCTP bytes sent in the last second.
acPMSctpSentBytesLastSecondEntry	1.3.6.1.4.1.5003.10.11.2.51.2.1		not-accessible
U32 acPMSctpSentBytesLastSecondInterval	1.3.6.1.4.1.5003.10.11.2.51.2.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMSctpSentBytesLastSecondVal	1.3.6.1.4.1.5003.10.11.2.51.2.1.2	Gauge32	read-only	Value of gauge or counter.
I32 acPMSctpSentBytesLastSecondAverage	1.3.6.1.4.1.5003.10.11.2.51.2.1.3	Integer32	read-only	Average value within the period time.
I32 acPMSctpSentBytesLastSecondMax	1.3.6.1.4.1.5003.10.11.2.51.2.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMSctpSentBytesLastSecondMin	1.3.6.1.4.1.5003.10.11.2.51.2.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMSctpSentBytesLastSecondFullDayAverage	1.3.6.1.4.1.5003.10.11.2.51.2.1.6	Integer32	read-only	The average of full 24 hours.
acPMSctpRetransBytesTable	1.3.6.1.4.1.5003.10.11.2.51.3		not-accessible	Number of retransmission bytes with in the last minute.
acPMSctpRetransBytesEntry	1.3.6.1.4.1.5003.10.11.2.51.3.1		not-accessible
U32 acPMSctpRetransBytesInterval	1.3.6.1.4.1.5003.10.11.2.51.3.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMSctpRetransBytesVal	1.3.6.1.4.1.5003.10.11.2.51.3.1.2	Gauge32	read-only	Value of gauge or counter.
I32 acPMSctpRetransBytesAverage	1.3.6.1.4.1.5003.10.11.2.51.3.1.3	Integer32	read-only	Average value within the period time.
I32 acPMSctpRetransBytesMax	1.3.6.1.4.1.5003.10.11.2.51.3.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMSctpRetransBytesMin	1.3.6.1.4.1.5003.10.11.2.51.3.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMSctpRetransBytesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.51.3.1.6	Integer32	read-only	The average of full 24 hours.
acPMSctpRetransAttemptsTable	1.3.6.1.4.1.5003.10.11.2.51.4		not-accessible	Number of SCTP retransmission attempts with in the last minute.
acPMSctpRetransAttemptsEntry	1.3.6.1.4.1.5003.10.11.2.51.4.1		not-accessible
U32 acPMSctpRetransAttemptsInterval	1.3.6.1.4.1.5003.10.11.2.51.4.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMSctpRetransAttemptsVal	1.3.6.1.4.1.5003.10.11.2.51.4.1.2	Gauge32	read-only	Value of gauge or counter.
I32 acPMSctpRetransAttemptsAverage	1.3.6.1.4.1.5003.10.11.2.51.4.1.3	Integer32	read-only	Average value with in the period time.
I32 acPMSctpRetransAttemptsMax	1.3.6.1.4.1.5003.10.11.2.51.4.1.4	Integer32	read-only	Maximum value with in the period time.
I32 acPMSctpRetransAttemptsMin	1.3.6.1.4.1.5003.10.11.2.51.4.1.5	Integer32	read-only	Minimum value with in the period time.
I32 acPMSctpRetransAttemptsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.51.4.1.6	Integer32	read-only	The average of full 24 hours.
acPMSystemSecurity	1.3.6.1.4.1.5003.10.11.2.61
acPMIPsecCurrentSAsTable	1.3.6.1.4.1.5003.10.11.2.61.1		not-accessible	Number of concurrent IPsec SA's (security associations)
acPMIPsecCurrentSAsEntry	1.3.6.1.4.1.5003.10.11.2.61.1.1		not-accessible
U32 acPMIPsecCurrentSAsInterval	1.3.6.1.4.1.5003.10.11.2.61.1.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMIPsecCurrentSAsVal	1.3.6.1.4.1.5003.10.11.2.61.1.1.2	Gauge32	read-only	Value of gauge or counter.
I32 acPMIPsecCurrentSAsAverage	1.3.6.1.4.1.5003.10.11.2.61.1.1.3	Integer32	read-only	Average value within the period time.
I32 acPMIPsecCurrentSAsMax	1.3.6.1.4.1.5003.10.11.2.61.1.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMIPsecCurrentSAsMin	1.3.6.1.4.1.5003.10.11.2.61.1.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMIPsecCurrentSAsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.61.1.1.6	Integer32	read-only	The average of full 24 hours.
I32 acPMIPsecCurrentSAsTotal	1.3.6.1.4.1.5003.10.11.2.61.1.1.7	Integer32	read-only	Total since last reset.
acPMSystemMulticast	1.3.6.1.4.1.5003.10.11.2.71
acPMMulticastIPPacketsReceivedTable	1.3.6.1.4.1.5003.10.11.2.71.1		not-accessible	Total numbet of multicast IP packets received from ethernet driver.
acPMMulticastIPPacketsReceivedEntry	1.3.6.1.4.1.5003.10.11.2.71.1.1		not-accessible
U32 acPMMulticastIPPacketsReceivedInterval	1.3.6.1.4.1.5003.10.11.2.71.1.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMMulticastIPPacketsReceivedVal	1.3.6.1.4.1.5003.10.11.2.71.1.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMMulticastIPPacketsReceivedAverage	1.3.6.1.4.1.5003.10.11.2.71.1.1.3	Integer32	read-only	Average value within the period time.
I32 acPMMulticastIPPacketsReceivedMax	1.3.6.1.4.1.5003.10.11.2.71.1.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMMulticastIPPacketsReceivedMin	1.3.6.1.4.1.5003.10.11.2.71.1.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMMulticastIPPacketsReceivedFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.1.1.6	Integer32	read-only	The average of full 24 hours.
acPMMulticastUDPPacketsReceivedTable	1.3.6.1.4.1.5003.10.11.2.71.2		not-accessible	Numbet of multicast IP packets conveying UDP payload that were accepted. These packets presented multicast IP address and UDP port that are registered by at least one channel.
acPMMulticastUDPPacketsReceivedEntry	1.3.6.1.4.1.5003.10.11.2.71.2.1		not-accessible
U32 acPMMulticastUDPPacketsReceivedInterval	1.3.6.1.4.1.5003.10.11.2.71.2.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMMulticastUDPPacketsReceivedVal	1.3.6.1.4.1.5003.10.11.2.71.2.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMMulticastUDPPacketsReceivedAverage	1.3.6.1.4.1.5003.10.11.2.71.2.1.3	Integer32	read-only	Average value within the period time.
I32 acPMMulticastUDPPacketsReceivedMax	1.3.6.1.4.1.5003.10.11.2.71.2.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMMulticastUDPPacketsReceivedMin	1.3.6.1.4.1.5003.10.11.2.71.2.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMMulticastUDPPacketsReceivedFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.2.1.6	Integer32	read-only	The average of full 24 hours.
acPMMulticastUDPPacketsRejectedTable	1.3.6.1.4.1.5003.10.11.2.71.3		not-accessible	Number of multicast IP packets conveying UDP payload that were rejected. That is, these packets presented a multicast IP address or/and UDP port that are not registered.
acPMMulticastUDPPacketsRejectedEntry	1.3.6.1.4.1.5003.10.11.2.71.3.1		not-accessible
U32 acPMMulticastUDPPacketsRejectedInterval	1.3.6.1.4.1.5003.10.11.2.71.3.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMMulticastUDPPacketsRejectedVal	1.3.6.1.4.1.5003.10.11.2.71.3.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMMulticastUDPPacketsRejectedAverage	1.3.6.1.4.1.5003.10.11.2.71.3.1.3	Integer32	read-only	Average value within the period time.
I32 acPMMulticastUDPPacketsRejectedMax	1.3.6.1.4.1.5003.10.11.2.71.3.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMMulticastUDPPacketsRejectedMin	1.3.6.1.4.1.5003.10.11.2.71.3.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMMulticastUDPPacketsRejectedFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.3.1.6	Integer32	read-only	The average of full 24 hours.
acPMMulticastIGMPPacketsReceivedTable	1.3.6.1.4.1.5003.10.11.2.71.4		not-accessible	Total number of IGMP packets received.
acPMMulticastIGMPPacketsReceivedEntry	1.3.6.1.4.1.5003.10.11.2.71.4.1		not-accessible
U32 acPMMulticastIGMPPacketsReceivedInterval	1.3.6.1.4.1.5003.10.11.2.71.4.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMMulticastIGMPPacketsReceivedVal	1.3.6.1.4.1.5003.10.11.2.71.4.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMMulticastIGMPPacketsReceivedAverage	1.3.6.1.4.1.5003.10.11.2.71.4.1.3	Integer32	read-only	Average value within the period time.
I32 acPMMulticastIGMPPacketsReceivedMax	1.3.6.1.4.1.5003.10.11.2.71.4.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMMulticastIGMPPacketsReceivedMin	1.3.6.1.4.1.5003.10.11.2.71.4.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMMulticastIGMPPacketsReceivedFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.4.1.6	Integer32	read-only	The average of full 24 hours.
acPMIGMPGeneralQueryReceivedTable	1.3.6.1.4.1.5003.10.11.2.71.5		not-accessible	Number of IGMP general queries received.
acPMIGMPGeneralQueryReceivedEntry	1.3.6.1.4.1.5003.10.11.2.71.5.1		not-accessible
U32 acPMIGMPGeneralQueryReceivedInterval	1.3.6.1.4.1.5003.10.11.2.71.5.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMIGMPGeneralQueryReceivedVal	1.3.6.1.4.1.5003.10.11.2.71.5.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMIGMPGeneralQueryReceivedAverage	1.3.6.1.4.1.5003.10.11.2.71.5.1.3	Integer32	read-only	Average value within the period time.
I32 acPMIGMPGeneralQueryReceivedMax	1.3.6.1.4.1.5003.10.11.2.71.5.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMIGMPGeneralQueryReceivedMin	1.3.6.1.4.1.5003.10.11.2.71.5.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMIGMPGeneralQueryReceivedFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.5.1.6	Integer32	read-only	The average of full 24 hours.
acPMIGMPSpecificQueryReceivedTable	1.3.6.1.4.1.5003.10.11.2.71.6		not-accessible	Number of IGMP specific queries received.
acPMIGMPSpecificQueryReceivedEntry	1.3.6.1.4.1.5003.10.11.2.71.6.1		not-accessible
U32 acPMIGMPSpecificQueryReceivedInterval	1.3.6.1.4.1.5003.10.11.2.71.6.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMIGMPSpecificQueryReceivedVal	1.3.6.1.4.1.5003.10.11.2.71.6.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMIGMPSpecificQueryReceivedAverage	1.3.6.1.4.1.5003.10.11.2.71.6.1.3	Integer32	read-only	Average value within the period time.
I32 acPMIGMPSpecificQueryReceivedMax	1.3.6.1.4.1.5003.10.11.2.71.6.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMIGMPSpecificQueryReceivedMin	1.3.6.1.4.1.5003.10.11.2.71.6.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMIGMPSpecificQueryReceivedFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.6.1.6	Integer32	read-only	The average of full 24 hours.
acPMIGMPMembershipReportsSentTable	1.3.6.1.4.1.5003.10.11.2.71.7		not-accessible	Number of IGMP membership reports sent.
acPMIGMPMembershipReportsSentEntry	1.3.6.1.4.1.5003.10.11.2.71.7.1		not-accessible
U32 acPMIGMPMembershipReportsSentInterval	1.3.6.1.4.1.5003.10.11.2.71.7.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMIGMPMembershipReportsSentVal	1.3.6.1.4.1.5003.10.11.2.71.7.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMIGMPMembershipReportsSentAverage	1.3.6.1.4.1.5003.10.11.2.71.7.1.3	Integer32	read-only	Average value within the period time.
I32 acPMIGMPMembershipReportsSentMax	1.3.6.1.4.1.5003.10.11.2.71.7.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMIGMPMembershipReportsSentMin	1.3.6.1.4.1.5003.10.11.2.71.7.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMIGMPMembershipReportsSentFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.7.1.6	Integer32	read-only	The average of full 24 hours.
acPMIGMPLeaveGroupSentTable	1.3.6.1.4.1.5003.10.11.2.71.8		not-accessible	Number of IGMP leave group messages sent.
acPMIGMPLeaveGroupSentEntry	1.3.6.1.4.1.5003.10.11.2.71.8.1		not-accessible
U32 acPMIGMPLeaveGroupSentInterval	1.3.6.1.4.1.5003.10.11.2.71.8.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMIGMPLeaveGroupSentVal	1.3.6.1.4.1.5003.10.11.2.71.8.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMIGMPLeaveGroupSentAverage	1.3.6.1.4.1.5003.10.11.2.71.8.1.3	Integer32	read-only	Average value within the period time.
I32 acPMIGMPLeaveGroupSentMax	1.3.6.1.4.1.5003.10.11.2.71.8.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMIGMPLeaveGroupSentMin	1.3.6.1.4.1.5003.10.11.2.71.8.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMIGMPLeaveGroupSentFullDayAverage	1.3.6.1.4.1.5003.10.11.2.71.8.1.6	Integer32	read-only	The average of full 24 hours.
acPMSystemCongestion	1.3.6.1.4.1.5003.10.11.2.81
acPMCongestionGeneralResourcesTable	1.3.6.1.4.1.5003.10.11.2.81.1		not-accessible
acPMCongestionGeneralResourcesEntry	1.3.6.1.4.1.5003.10.11.2.81.1.1		not-accessible
U32 acPMCongestionGeneralResourcesInterval	1.3.6.1.4.1.5003.10.11.2.81.1.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMCongestionGeneralResourcesVal	1.3.6.1.4.1.5003.10.11.2.81.1.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMCongestionGeneralResourcesAverage	1.3.6.1.4.1.5003.10.11.2.81.1.1.3	Integer32	read-only	Average value within the period time.
I32 acPMCongestionGeneralResourcesMax	1.3.6.1.4.1.5003.10.11.2.81.1.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMCongestionGeneralResourcesMin	1.3.6.1.4.1.5003.10.11.2.81.1.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMCongestionGeneralResourcesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.81.1.1.6	Integer32	read-only	The average of full 24 hours.
acPMCongestionDSPresourcesTable	1.3.6.1.4.1.5003.10.11.2.81.2		not-accessible
acPMCongestionDSPresourcesEntry	1.3.6.1.4.1.5003.10.11.2.81.2.1		not-accessible
U32 acPMCongestionDSPresourcesInterval	1.3.6.1.4.1.5003.10.11.2.81.2.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMCongestionDSPresourcesVal	1.3.6.1.4.1.5003.10.11.2.81.2.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMCongestionDSPresourcesAverage	1.3.6.1.4.1.5003.10.11.2.81.2.1.3	Integer32	read-only	Average value within the period time.
I32 acPMCongestionDSPresourcesMax	1.3.6.1.4.1.5003.10.11.2.81.2.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMCongestionDSPresourcesMin	1.3.6.1.4.1.5003.10.11.2.81.2.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMCongestionDSPresourcesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.81.2.1.6	Integer32	read-only	The average of full 24 hours.
acPMCongestionIPresourcesTable	1.3.6.1.4.1.5003.10.11.2.81.3		not-accessible
acPMCongestionIPresourcesEntry	1.3.6.1.4.1.5003.10.11.2.81.3.1		not-accessible
U32 acPMCongestionIPresourcesInterval	1.3.6.1.4.1.5003.10.11.2.81.3.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMCongestionIPresourcesVal	1.3.6.1.4.1.5003.10.11.2.81.3.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMCongestionIPresourcesAverage	1.3.6.1.4.1.5003.10.11.2.81.3.1.3	Integer32	read-only	Average value within the period time.
I32 acPMCongestionIPresourcesMax	1.3.6.1.4.1.5003.10.11.2.81.3.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMCongestionIPresourcesMin	1.3.6.1.4.1.5003.10.11.2.81.3.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMCongestionIPresourcesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.81.3.1.6	Integer32	read-only	The average of full 24 hours.
acPMCongestionATMresourcesTable	1.3.6.1.4.1.5003.10.11.2.81.4		not-accessible	ATM resources are: ATM end point � as for today, restricted to 2016,;AAL2 VCC count (1024) and AAL1 VCC count (2016).
acPMCongestionATMresourcesEntry	1.3.6.1.4.1.5003.10.11.2.81.4.1		not-accessible
U32 acPMCongestionATMresourcesInterval	1.3.6.1.4.1.5003.10.11.2.81.4.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMCongestionATMresourcesVal	1.3.6.1.4.1.5003.10.11.2.81.4.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMCongestionATMresourcesAverage	1.3.6.1.4.1.5003.10.11.2.81.4.1.3	Integer32	read-only	Average value within the period time.
I32 acPMCongestionATMresourcesMax	1.3.6.1.4.1.5003.10.11.2.81.4.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMCongestionATMresourcesMin	1.3.6.1.4.1.5003.10.11.2.81.4.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMCongestionATMresourcesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.81.4.1.6	Integer32	read-only	The average of full 24 hours.
acPMCongestionConferenceResourcesTable	1.3.6.1.4.1.5003.10.11.2.81.5		not-accessible	Extension Resources are actually a Conference Resource: Conference Resource congestion is running out of Conference DSP�s.
acPMCongestionConferenceResourcesEntry	1.3.6.1.4.1.5003.10.11.2.81.5.1		not-accessible
U32 acPMCongestionConferenceResourcesInterval	1.3.6.1.4.1.5003.10.11.2.81.5.1.1	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMCongestionConferenceResourcesVal	1.3.6.1.4.1.5003.10.11.2.81.5.1.2	Counter32	read-only	Value of gauge or counter.
I32 acPMCongestionConferenceResourcesAverage	1.3.6.1.4.1.5003.10.11.2.81.5.1.3	Integer32	read-only	Average value within the period time.
I32 acPMCongestionConferenceResourcesMax	1.3.6.1.4.1.5003.10.11.2.81.5.1.4	Integer32	read-only	Maximum value within the period time.
I32 acPMCongestionConferenceResourcesMin	1.3.6.1.4.1.5003.10.11.2.81.5.1.5	Integer32	read-only	Minimum value within the period time.
I32 acPMCongestionConferenceResourcesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.81.5.1.6	Integer32	read-only	The average of full 24 hours.
acPMSystemNFS	1.3.6.1.4.1.5003.10.11.2.91
acPMNFSCurrentRequestsTable	1.3.6.1.4.1.5003.10.11.2.91.1		not-accessible	Current number of NFS requests.
acPMNFSCurrentRequestsEntry	1.3.6.1.4.1.5003.10.11.2.91.1.1		not-accessible
INT acPMNFSCurrentRequestsType	1.3.6.1.4.1.5003.10.11.2.91.1.1.1	INTEGER	not-accessible	Request type: 0 (readFile), 1 (writeFile), 2 (play), 3 (record), 4 (other).
U32 acPMNFSCurrentRequestsInterval	1.3.6.1.4.1.5003.10.11.2.91.1.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNFSCurrentRequestsVal	1.3.6.1.4.1.5003.10.11.2.91.1.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMNFSCurrentRequestsAverage	1.3.6.1.4.1.5003.10.11.2.91.1.1.4	Integer32	read-only	Average value with in the period time.
I32 acPMNFSCurrentRequestsMax	1.3.6.1.4.1.5003.10.11.2.91.1.1.5	Integer32	read-only	Maximum value with in the period time.
I32 acPMNFSCurrentRequestsMin	1.3.6.1.4.1.5003.10.11.2.91.1.1.6	Integer32	read-only	Minimum value with in the period time.
I32 acPMNFSCurrentRequestsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.1.1.7	Integer32	read-only	The average of full 24 hours.
acPMNFSRequestsTable	1.3.6.1.4.1.5003.10.11.2.91.2		not-accessible	Total number of NFS requests. The index is interpreted as follows: 0 (readFile), 1 (writeFile), 2 (play), 3 (record), 4 (other).
acPMNFSRequestsEntry	1.3.6.1.4.1.5003.10.11.2.91.2.1		not-accessible
INT acPMNFSRequestsType	1.3.6.1.4.1.5003.10.11.2.91.2.1.1	INTEGER	not-accessible	Request type: 0 (readFile), 1 (writeFile), 2 (play), 3 (record), 4 (other).
U32 acPMNFSRequestsInterval	1.3.6.1.4.1.5003.10.11.2.91.2.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNFSRequestsVal	1.3.6.1.4.1.5003.10.11.2.91.2.1.3	Counter32	read-only	Value of gauge or counter.
I32 acPMNFSRequestsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.2.1.4	Integer32	read-only	The average of full 24 hours.
acPMNFSRoundTripTimeMsTable	1.3.6.1.4.1.5003.10.11.2.91.3		not-accessible	Amount of time between an NFS call and receipt of the corresponding NFS reply. The index corresponds to the index used in the NFSServers INI parameter table. This is the same index used in the SNMP NFS servers table.
acPMNFSRoundTripTimeMsEntry	1.3.6.1.4.1.5003.10.11.2.91.3.1		not-accessible
U32 acPMNFSRoundTripTimeMsRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.3.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSRoundTripTimeMsInterval	1.3.6.1.4.1.5003.10.11.2.91.3.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNFSRoundTripTimeMsVal	1.3.6.1.4.1.5003.10.11.2.91.3.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMNFSRoundTripTimeMsAverage	1.3.6.1.4.1.5003.10.11.2.91.3.1.4	Integer32	read-only	Average value with in the period time.
I32 acPMNFSRoundTripTimeMsMax	1.3.6.1.4.1.5003.10.11.2.91.3.1.5	Integer32	read-only	Maximum value with in the period time.
I32 acPMNFSRoundTripTimeMsMin	1.3.6.1.4.1.5003.10.11.2.91.3.1.6	Integer32	read-only	Minimum value with in the period time.
C32 acPMNFSRoundTripTimeMsVolume	1.3.6.1.4.1.5003.10.11.2.91.3.1.7	Counter32	read-only	Activity volume.
I32 acPMNFSRoundTripTimeMsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.91.3.1.8	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNFSRoundTripTimeMsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.91.3.1.9	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNFSRoundTripTimeMsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.91.3.1.10	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNFSRoundTripTimeMsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.3.1.11	Integer32	read-only	The average of full 24 hours.
acPMNFSRetriesTable	1.3.6.1.4.1.5003.10.11.2.91.4		not-accessible	The number of times that the NFS subsystem retransmitted an NFS request because it did not receive a reply in the expected amount of time. The index corresponds to the index used in the NFSServers INI parameter table. This is the same index used in the SNMP NFS servers table.
acPMNFSRetriesEntry	1.3.6.1.4.1.5003.10.11.2.91.4.1		not-accessible
U32 acPMNFSRetriesRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.4.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSRetriesInterval	1.3.6.1.4.1.5003.10.11.2.91.4.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNFSRetriesVal	1.3.6.1.4.1.5003.10.11.2.91.4.1.3	Gauge32	read-only	Value of gauge or counter.
C32 acPMNFSRetriesVolume	1.3.6.1.4.1.5003.10.11.2.91.4.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSRetriesTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.91.4.1.5	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNFSRetriesTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.91.4.1.6	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNFSRetriesTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.91.4.1.7	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNFSRetriesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.4.1.8	Integer32	read-only	The average of full 24 hours.
acPMNFSAbortDueToMaxRetriesExceededTable	1.3.6.1.4.1.5003.10.11.2.91.5		not-accessible	The number of times that a request was aborted because of problems communicating with the NFS server. This could be a result of a congested network or busy NFS server. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSAbortDueToMaxRetriesExceededEntry	1.3.6.1.4.1.5003.10.11.2.91.5.1		not-accessible
U32 acPMNFSAbortDueToMaxRetriesExceededRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.5.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSAbortDueToMaxRetriesExceededInterval	1.3.6.1.4.1.5003.10.11.2.91.5.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNFSAbortDueToMaxRetriesExceededVal	1.3.6.1.4.1.5003.10.11.2.91.5.1.3	Gauge32	read-only	Value of gauge or counter.
C32 acPMNFSAbortDueToMaxRetriesExceededVolume	1.3.6.1.4.1.5003.10.11.2.91.5.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSAbortDueToMaxRetriesExceededTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.91.5.1.5	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNFSAbortDueToMaxRetriesExceededTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.91.5.1.6	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNFSAbortDueToMaxRetriesExceededTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.91.5.1.7	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNFSAbortDueToMaxRetriesExceededFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.5.1.8	Integer32	read-only	The average of full 24 hours.
acPMNFSDelayedResponsesTable	1.3.6.1.4.1.5003.10.11.2.91.6		not-accessible	The number of times that a late reply was received from the NFS server. That is, the reply was received after a timeout and retransmit of that request. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSDelayedResponsesEntry	1.3.6.1.4.1.5003.10.11.2.91.6.1		not-accessible
U32 acPMNFSDelayedResponsesRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.6.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSDelayedResponsesInterval	1.3.6.1.4.1.5003.10.11.2.91.6.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNFSDelayedResponsesVal	1.3.6.1.4.1.5003.10.11.2.91.6.1.3	Gauge32	read-only	Value of gauge or counter.
C32 acPMNFSDelayedResponsesVolume	1.3.6.1.4.1.5003.10.11.2.91.6.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSDelayedResponsesTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.91.6.1.5	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNFSDelayedResponsesTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.91.6.1.6	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNFSDelayedResponsesTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.91.6.1.7	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNFSDelayedResponsesFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.6.1.8	Integer32	read-only	The average of full 24 hours.
acPMNFSBytesDroppedOnRecordTable	1.3.6.1.4.1.5003.10.11.2.91.7		not-accessible	The number of bytes of record data dropped because the NFS subsystem cannot push data fast enough to the remote file system. This could be a result of a congested network or busy NFS server. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSBytesDroppedOnRecordEntry	1.3.6.1.4.1.5003.10.11.2.91.7.1		not-accessible
U32 acPMNFSBytesDroppedOnRecordRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.7.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSBytesDroppedOnRecordInterval	1.3.6.1.4.1.5003.10.11.2.91.7.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMNFSBytesDroppedOnRecordVal	1.3.6.1.4.1.5003.10.11.2.91.7.1.3	Gauge32	read-only	Value of gauge or counter.
C32 acPMNFSBytesDroppedOnRecordVolume	1.3.6.1.4.1.5003.10.11.2.91.7.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSBytesDroppedOnRecordTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.91.7.1.5	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMNFSBytesDroppedOnRecordTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.91.7.1.6	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMNFSBytesDroppedOnRecordTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.91.7.1.7	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMNFSBytesDroppedOnRecordFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.7.1.8	Integer32	read-only	The average of full 24 hours.
acPMNFSLookupCallsTable	1.3.6.1.4.1.5003.10.11.2.91.8		not-accessible	The NFS lookup call messages sent to the NFS Server for access to this remote file system. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSLookupCallsEntry	1.3.6.1.4.1.5003.10.11.2.91.8.1		not-accessible
U32 acPMNFSLookupCallsRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.8.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSLookupCallsInterval	1.3.6.1.4.1.5003.10.11.2.91.8.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNFSLookupCallsVal	1.3.6.1.4.1.5003.10.11.2.91.8.1.3	Counter32	read-only	Value of gauge or counter.
C32 acPMNFSLookupCallsVolume	1.3.6.1.4.1.5003.10.11.2.91.8.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSLookupCallsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.8.1.5	Integer32	read-only	The average of full 24 hours.
acPMNFSCreateCallsTable	1.3.6.1.4.1.5003.10.11.2.91.9		not-accessible	The NFS create call messages sent to the NFS Server for access to this remote file system. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSCreateCallsEntry	1.3.6.1.4.1.5003.10.11.2.91.9.1		not-accessible
U32 acPMNFSCreateCallsRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.9.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSCreateCallsInterval	1.3.6.1.4.1.5003.10.11.2.91.9.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNFSCreateCallsVal	1.3.6.1.4.1.5003.10.11.2.91.9.1.3	Counter32	read-only	Value of gauge or counter.
C32 acPMNFSCreateCallsVolume	1.3.6.1.4.1.5003.10.11.2.91.9.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSCreateCallsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.9.1.5	Integer32	read-only	The average of full 24 hours.
acPMNFSReadCallsTable	1.3.6.1.4.1.5003.10.11.2.91.10		not-accessible	The NFS read call messages sent to the NFS Server for access to this remote file system. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSReadCallsEntry	1.3.6.1.4.1.5003.10.11.2.91.10.1		not-accessible
U32 acPMNFSReadCallsRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.10.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSReadCallsInterval	1.3.6.1.4.1.5003.10.11.2.91.10.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNFSReadCallsVal	1.3.6.1.4.1.5003.10.11.2.91.10.1.3	Counter32	read-only	Value of gauge or counter.
C32 acPMNFSReadCallsVolume	1.3.6.1.4.1.5003.10.11.2.91.10.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSReadCallsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.10.1.5	Integer32	read-only	The average of full 24 hours.
acPMNFSWriteCallsTable	1.3.6.1.4.1.5003.10.11.2.91.11		not-accessible	The NFS write call messages sent to the NFS Server for access to this remote file system. The index corresponds to the index used in the NFSServers INI parameter table.
acPMNFSWriteCallsEntry	1.3.6.1.4.1.5003.10.11.2.91.11.1		not-accessible
U32 acPMNFSWriteCallsRfsNumber	1.3.6.1.4.1.5003.10.11.2.91.11.1.1	Unsigned32	not-accessible	The remote file system number (0 to 15). As is used in the NFS servers table.
U32 acPMNFSWriteCallsInterval	1.3.6.1.4.1.5003.10.11.2.91.11.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
C32 acPMNFSWriteCallsVal	1.3.6.1.4.1.5003.10.11.2.91.11.1.3	Counter32	read-only	Value of gauge or counter.
C32 acPMNFSWriteCallsVolume	1.3.6.1.4.1.5003.10.11.2.91.11.1.4	Counter32	read-only	Activity volume.
I32 acPMNFSWriteCallsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.91.11.1.5	Integer32	read-only	The average of full 24 hours.
acPMSystemMSBG	1.3.6.1.4.1.5003.10.11.2.101
acPMRXGoodOctetsTable	1.3.6.1.4.1.5003.10.11.2.101.1		not-accessible	RX - Good Octets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXGoodOctetsEntry	1.3.6.1.4.1.5003.10.11.2.101.1.1		not-accessible
U32 acPMRXGoodOctetsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.1.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXGoodOctetsInterval	1.3.6.1.4.1.5003.10.11.2.101.1.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXGoodOctetsVal	1.3.6.1.4.1.5003.10.11.2.101.1.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXGoodOctetsAverage	1.3.6.1.4.1.5003.10.11.2.101.1.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXGoodOctetsMax	1.3.6.1.4.1.5003.10.11.2.101.1.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXGoodOctetsMin	1.3.6.1.4.1.5003.10.11.2.101.1.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXGoodOctetsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.1.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXGoodOctetsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.1.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXGoodOctetsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.1.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXGoodOctetsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.1.1.10	Integer32	read-only	The average of full 24 hours.
acPMRXBadOctetsTable	1.3.6.1.4.1.5003.10.11.2.101.2		not-accessible	RX - Bad Octets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXBadOctetsEntry	1.3.6.1.4.1.5003.10.11.2.101.2.1		not-accessible
U32 acPMRXBadOctetsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.2.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXBadOctetsInterval	1.3.6.1.4.1.5003.10.11.2.101.2.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXBadOctetsVal	1.3.6.1.4.1.5003.10.11.2.101.2.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXBadOctetsAverage	1.3.6.1.4.1.5003.10.11.2.101.2.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXBadOctetsMax	1.3.6.1.4.1.5003.10.11.2.101.2.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXBadOctetsMin	1.3.6.1.4.1.5003.10.11.2.101.2.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXBadOctetsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.2.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXBadOctetsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.2.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXBadOctetsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.2.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXBadOctetsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.2.1.10	Integer32	read-only	The average of full 24 hours.
acPMRXUndersizePacketsTable	1.3.6.1.4.1.5003.10.11.2.101.3		not-accessible	RX - Undersize Packets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXUndersizePacketsEntry	1.3.6.1.4.1.5003.10.11.2.101.3.1		not-accessible
U32 acPMRXUndersizePacketsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.3.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXUndersizePacketsInterval	1.3.6.1.4.1.5003.10.11.2.101.3.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXUndersizePacketsVal	1.3.6.1.4.1.5003.10.11.2.101.3.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXUndersizePacketsAverage	1.3.6.1.4.1.5003.10.11.2.101.3.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXUndersizePacketsMax	1.3.6.1.4.1.5003.10.11.2.101.3.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXUndersizePacketsMin	1.3.6.1.4.1.5003.10.11.2.101.3.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXUndersizePacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.3.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXUndersizePacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.3.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXUndersizePacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.3.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXUndersizePacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.3.1.10	Integer32	read-only	The average of full 24 hours.
acPMRXOversizePacketsTable	1.3.6.1.4.1.5003.10.11.2.101.4		not-accessible	RX - Oversize Packets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXOversizePacketsEntry	1.3.6.1.4.1.5003.10.11.2.101.4.1		not-accessible
U32 acPMRXOversizePacketsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.4.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXOversizePacketsInterval	1.3.6.1.4.1.5003.10.11.2.101.4.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXOversizePacketsVal	1.3.6.1.4.1.5003.10.11.2.101.4.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXOversizePacketsAverage	1.3.6.1.4.1.5003.10.11.2.101.4.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXOversizePacketsMax	1.3.6.1.4.1.5003.10.11.2.101.4.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXOversizePacketsMin	1.3.6.1.4.1.5003.10.11.2.101.4.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXOversizePacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.4.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXOversizePacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.4.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXOversizePacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.4.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXOversizePacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.4.1.10	Integer32	read-only	The average of full 24 hours.
acPMRXMacErrorsTable	1.3.6.1.4.1.5003.10.11.2.101.5		not-accessible	RX - MAC Errors counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXMacErrorsEntry	1.3.6.1.4.1.5003.10.11.2.101.5.1		not-accessible
U32 acPMRXMacErrorsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.5.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXMacErrorsInterval	1.3.6.1.4.1.5003.10.11.2.101.5.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXMacErrorsVal	1.3.6.1.4.1.5003.10.11.2.101.5.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXMacErrorsAverage	1.3.6.1.4.1.5003.10.11.2.101.5.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXMacErrorsMax	1.3.6.1.4.1.5003.10.11.2.101.5.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXMacErrorsMin	1.3.6.1.4.1.5003.10.11.2.101.5.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXMacErrorsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.5.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXMacErrorsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.5.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXMacErrorsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.5.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXMacErrorsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.5.1.10	Integer32	read-only	The average of full 24 hours.
acPMRXFCSErroredPacketsTable	1.3.6.1.4.1.5003.10.11.2.101.6		not-accessible	RX - FCS Errored Packets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXFCSErroredPacketsEntry	1.3.6.1.4.1.5003.10.11.2.101.6.1		not-accessible
U32 acPMRXFCSErroredPacketsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.6.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXFCSErroredPacketsInterval	1.3.6.1.4.1.5003.10.11.2.101.6.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXFCSErroredPacketsVal	1.3.6.1.4.1.5003.10.11.2.101.6.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXFCSErroredPacketsAverage	1.3.6.1.4.1.5003.10.11.2.101.6.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXFCSErroredPacketsMax	1.3.6.1.4.1.5003.10.11.2.101.6.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXFCSErroredPacketsMin	1.3.6.1.4.1.5003.10.11.2.101.6.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXFCSErroredPacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.6.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXFCSErroredPacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.6.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXFCSErroredPacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.6.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXFCSErroredPacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.6.1.10	Integer32	read-only	The average of full 24 hours.
acPMRXDiscardPacketsTable	1.3.6.1.4.1.5003.10.11.2.101.7		not-accessible	RX - Discard Packets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMRXDiscardPacketsEntry	1.3.6.1.4.1.5003.10.11.2.101.7.1		not-accessible
U32 acPMRXDiscardPacketsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.7.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMRXDiscardPacketsInterval	1.3.6.1.4.1.5003.10.11.2.101.7.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMRXDiscardPacketsVal	1.3.6.1.4.1.5003.10.11.2.101.7.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMRXDiscardPacketsAverage	1.3.6.1.4.1.5003.10.11.2.101.7.1.4	Integer32	read-only	Average value within the period time.
I32 acPMRXDiscardPacketsMax	1.3.6.1.4.1.5003.10.11.2.101.7.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMRXDiscardPacketsMin	1.3.6.1.4.1.5003.10.11.2.101.7.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMRXDiscardPacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.7.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMRXDiscardPacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.7.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMRXDiscardPacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.7.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMRXDiscardPacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.7.1.10	Integer32	read-only	The average of full 24 hours.
acPMTXOctetsTable	1.3.6.1.4.1.5003.10.11.2.101.8		not-accessible	TX - Octets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMTXOctetsEntry	1.3.6.1.4.1.5003.10.11.2.101.8.1		not-accessible
U32 acPMTXOctetsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.8.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMTXOctetsInterval	1.3.6.1.4.1.5003.10.11.2.101.8.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMTXOctetsVal	1.3.6.1.4.1.5003.10.11.2.101.8.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMTXOctetsAverage	1.3.6.1.4.1.5003.10.11.2.101.8.1.4	Integer32	read-only	Average value within the period time.
I32 acPMTXOctetsMax	1.3.6.1.4.1.5003.10.11.2.101.8.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMTXOctetsMin	1.3.6.1.4.1.5003.10.11.2.101.8.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMTXOctetsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.8.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMTXOctetsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.8.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMTXOctetsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.8.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMTXOctetsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.8.1.10	Integer32	read-only	The average of full 24 hours.
acPMTXPacketsTable	1.3.6.1.4.1.5003.10.11.2.101.9		not-accessible	TX - Packets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMTXPacketsEntry	1.3.6.1.4.1.5003.10.11.2.101.9.1		not-accessible
U32 acPMTXPacketsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.9.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMTXPacketsInterval	1.3.6.1.4.1.5003.10.11.2.101.9.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMTXPacketsVal	1.3.6.1.4.1.5003.10.11.2.101.9.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMTXPacketsAverage	1.3.6.1.4.1.5003.10.11.2.101.9.1.4	Integer32	read-only	Average value within the period time.
I32 acPMTXPacketsMax	1.3.6.1.4.1.5003.10.11.2.101.9.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMTXPacketsMin	1.3.6.1.4.1.5003.10.11.2.101.9.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMTXPacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.9.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMTXPacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.9.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMTXPacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.9.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMTXPacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.9.1.10	Integer32	read-only	The average of full 24 hours.
acPMTXCollisionsTable	1.3.6.1.4.1.5003.10.11.2.101.10		not-accessible	TX - Collisions counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMTXCollisionsEntry	1.3.6.1.4.1.5003.10.11.2.101.10.1		not-accessible
U32 acPMTXCollisionsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.10.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMTXCollisionsInterval	1.3.6.1.4.1.5003.10.11.2.101.10.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMTXCollisionsVal	1.3.6.1.4.1.5003.10.11.2.101.10.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMTXCollisionsAverage	1.3.6.1.4.1.5003.10.11.2.101.10.1.4	Integer32	read-only	Average value within the period time.
I32 acPMTXCollisionsMax	1.3.6.1.4.1.5003.10.11.2.101.10.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMTXCollisionsMin	1.3.6.1.4.1.5003.10.11.2.101.10.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMTXCollisionsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.10.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMTXCollisionsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.10.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMTXCollisionsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.10.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMTXCollisionsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.10.1.10	Integer32	read-only	The average of full 24 hours.
acPMTXLatePacketsTable	1.3.6.1.4.1.5003.10.11.2.101.11		not-accessible	TX - Late Packets counter (index: 0 - WAN interface 1-12 for LAN interfaces).
acPMTXLatePacketsEntry	1.3.6.1.4.1.5003.10.11.2.101.11.1		not-accessible
U32 acPMTXLatePacketsInterfaceNum	1.3.6.1.4.1.5003.10.11.2.101.11.1.1	Unsigned32	not-accessible	Interface number: 0 - for the WAN interface and 1-12 for LAN interfaces.
U32 acPMTXLatePacketsInterval	1.3.6.1.4.1.5003.10.11.2.101.11.1.2	Unsigned32	not-accessible	Interval index. 0 - current period (incomplete monitoring - mid period). 1 - Last full period. 2 - One before last.
G32 acPMTXLatePacketsVal	1.3.6.1.4.1.5003.10.11.2.101.11.1.3	Gauge32	read-only	Value of gauge or counter.
I32 acPMTXLatePacketsAverage	1.3.6.1.4.1.5003.10.11.2.101.11.1.4	Integer32	read-only	Average value within the period time.
I32 acPMTXLatePacketsMax	1.3.6.1.4.1.5003.10.11.2.101.11.1.5	Integer32	read-only	Maximum value within the period time.
I32 acPMTXLatePacketsMin	1.3.6.1.4.1.5003.10.11.2.101.11.1.6	Integer32	read-only	Minimum value within the period time.
I32 acPMTXLatePacketsTimeBelowLowThreshold	1.3.6.1.4.1.5003.10.11.2.101.11.1.7	Integer32	read-only	Percent of interval time for which gauge is below what was determined as the low threshold.
I32 acPMTXLatePacketsTimeBetweenThresholds	1.3.6.1.4.1.5003.10.11.2.101.11.1.8	Integer32	read-only	Percent of interval time for which gauge is above what was determined as the high threshold.
I32 acPMTXLatePacketsTimeAboveHighThreshold	1.3.6.1.4.1.5003.10.11.2.101.11.1.9	Integer32	read-only	Percent of interval time for which gauge is between what were determined as the low and high thresholds.
I32 acPMTXLatePacketsFullDayAverage	1.3.6.1.4.1.5003.10.11.2.101.11.1.10	Integer32	read-only	The average of full 24 hours.

RFC description

Monitors system-level performance metrics on AudioCodes devices, including CPU utilization, memory usage, process health, and platform resource counters.

Start monitoring AudioCodes Mediant-series gateways/media servers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AC-PM-SYSTEM-MIB