AATS-MIB

All MIBs › AATS-MIB

Organization: Broadband Antenna Tracking systems

Last Updated: 2021-02-24

Category: Satellite

Description: Manages Broadband Antenna Tracking Systems (AATS) for satellite communications, providing antenna pointing control, tracking status, and signal quality monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AATS-MIB?

AATS-MIB supports Broadband Antenna Tracking Systems used in satellite communications ground equipment, providing management objects for antenna pointing control, tracking state, and RF link quality for the associated radio. It exposes status categories such as overall system status (active/stowed), tracking/pointing state, and radio link metrics including received signal strength (RSSI) and link status. It is directly used for monitoring hardware health and operational status: cpuTemp exposes the tracking controller's CPU temperature for thermal monitoring, radioConnected and linkStatusString/linkStatusInt reveal whether the associated radio link is up, and rssiString/rssiInt/rssiFloat quantify signal quality, together flagging degraded pointing accuracy or a lost satellite link. It appears to be a standalone vendor MIB for the BATS antenna-tracking software without a stated dependency on other MIBs. Typical deployment is in satellite ground stations or mobile SATCOM terminals where continuous antenna tracking and link-quality monitoring are safety/operationally critical. Engineers can download the AATS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AATS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

satellite antenna tracking system (AATS/BATS ground terminal)

Monitoring Examples

An administrator would poll status alongside active and stowed indicator objects to confirm the antenna is actively tracking rather than parked, and check cpuTemp to catch thermal issues in the tracking controller. Polling radioConnected together with linkStatusString/linkStatusInt and rssiInt/rssiFloat would reveal a degrading satellite link (low RSSI) before it results in a full loss of signal.

What Can Be Monitored

antenna tracking/active status
stowed state
controller CPU temperature
radio connection status
link status
received signal strength (RSSI)

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using cpuTemp OID:

Select a Broadband Antenna Tracking Systems (BATS) ground terminal as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cpuTemp into the Find box to locate it in the OID tree, then select it and click OK. Specifies if the cpu temperature in celsius (-1000 if n/a). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the reported value exceeds the level expected for healthy operation, since sustained high temperature often precedes thermal shutdown or hardware degradation. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
aats	1.3.6.1.4.1.37069			The MIB Module for BATS Software.
aatsBasicCompliance	1.3.6.1.4.1.37069.97.1.2			The compliance statement for the AATS MIB
aatsDot1	1.3.6.1.4.1.37069.1
aatsMIBCompliances	1.3.6.1.4.1.37069.97.1
aatsMIBConformance	1.3.6.1.4.1.37069.97
aatsMIBGroups	1.3.6.1.4.1.37069.97.2
aatsSnmpGroup	1.3.6.1.4.1.37069.97.2.8			The aats object group
INT active	1.3.6.1.4.1.37069.1.1.2	INTEGER	read-write	Specifies if the system is currently active. When an integer 1 is set, the system will restart the scan sequence. When an integer 0 is set, the system will stop
antennaHeading	1.3.6.1.4.1.37069.1.3.1.5
STR antennaHeading360ScaleFloat	1.3.6.1.4.1.37069.1.3.1.5.5	DisplayString	read-only	The current antenna heading in degrees (0 - 360)
I32 antennaHeading360ScaleInt	1.3.6.1.4.1.37069.1.3.1.5.4	Integer32	read-only	The current antenna heading in degrees (0 - 360), divde by 100 to get actual value
STR antennaHeadingFloat	1.3.6.1.4.1.37069.1.3.1.5.3	DisplayString	read-only	The current antenna heading in degrees (-180 - 180)
I32 antennaHeadingInt	1.3.6.1.4.1.37069.1.3.1.5.2	Integer32	read-only	The current antenna heading in degrees (-180 - 180), divde by 100 to get actual value
STR antennaHeadingString	1.3.6.1.4.1.37069.1.3.1.5.1	DisplayString	read-only	The string used to identify Antenna Heading
azimuth	1.3.6.1.4.1.37069.1.3.1.3
STR azimuth360ScaleFloat	1.3.6.1.4.1.37069.1.3.1.3.5	DisplayString	read-only	The current azimuth from the positioner in degrees (0 - 360)
I32 azimuth360ScaleInt	1.3.6.1.4.1.37069.1.3.1.3.4	Integer32	read-only	The current azimuth from the positioner in degrees (0 - 360), divde by 100 to get actual value
STR azimuthFloat	1.3.6.1.4.1.37069.1.3.1.3.3	DisplayString	read-only	The current azimuth from the positioner in degrees (-180 - 180)
I32 azimuthInt	1.3.6.1.4.1.37069.1.3.1.3.2	Integer32	read-only	The current azimuth from the positioner in degrees (-180 - 180), divde by 100 to get actual value
STR azimuthString	1.3.6.1.4.1.37069.1.3.1.3.1	DisplayString	read-only	The string used to identify azimuth
I32 cpuTempEx	1.3.6.1.4.1.37069.1.1.4	Integer32	read-only	Specifies if the cpu temperature in celsius (-1000 if n/a)
currentAccel	1.3.6.1.4.1.37069.1.4.8
currentGPSAltitude	1.3.6.1.4.1.37069.1.4.6
STR currentGPSAltitudeFeetFloat	1.3.6.1.4.1.37069.1.4.6.5	DisplayString	read-only	The current GPS Altitude in feet
I32 currentGPSAltitudeFeetInt	1.3.6.1.4.1.37069.1.4.6.4	Integer32	read-only	The current GPS Altitude in feet, divde by 100 to get actual value
STR currentGPSAltitudeFloat	1.3.6.1.4.1.37069.1.4.6.3	DisplayString	read-only	The current GPS Altitude in meters, divde by 100 to get actual value
I32 currentGPSAltitudeInt	1.3.6.1.4.1.37069.1.4.6.2	Integer32	read-only	The current GPS Altitude in meters, divde by 100 to get actual value
STR currentGPSAltitudeString	1.3.6.1.4.1.37069.1.4.6.1	DisplayString	read-only	The string used to identify current GPS Altitude
currentGPSHdgAcl	1.3.6.1.4.1.37069.1.4
STR currentGPSHdgAclString	1.3.6.1.4.1.37069.1.4.1	DisplayString	read-only	The string used to identify current GPS/Heading/Accel
currentGPSLatitude	1.3.6.1.4.1.37069.1.4.4
STR currentGPSLatitudeFloat	1.3.6.1.4.1.37069.1.4.4.3	DisplayString	read-only	The current GPS Latitude
I32 currentGPSLatitudeInt	1.3.6.1.4.1.37069.1.4.4.2	Integer32	read-only	The current GPS Latitude, divde by 10000 to get actual value
STR currentGPSLatitudeString	1.3.6.1.4.1.37069.1.4.4.1	DisplayString	read-only	The string used to identify current GPS Latitude
currentGPSLongitude	1.3.6.1.4.1.37069.1.4.5
STR currentGPSLongitudeFloat	1.3.6.1.4.1.37069.1.4.5.3	DisplayString	read-only	The current GPS Longitude
I32 currentGPSLongitudeInt	1.3.6.1.4.1.37069.1.4.5.2	Integer32	read-only	The current GPS Longitude, divde by 10000 to get actual value
STR currentGPSLongitudeString	1.3.6.1.4.1.37069.1.4.5.1	DisplayString	read-only	The string used to identify current GPS Longitude
currentGPSStatus	1.3.6.1.4.1.37069.1.4.2
INT currentGPSStatusInt	1.3.6.1.4.1.37069.1.4.2.2	INTEGER	read-only	The current GPS Status
STR currentGPSStatusString	1.3.6.1.4.1.37069.1.4.2.1	DisplayString	read-only	The string used to identify current GPS Status
STR currentGPSStatusValue	1.3.6.1.4.1.37069.1.4.2.3	DisplayString	read-only	The current GPS Status
currentGPSTimestamp	1.3.6.1.4.1.37069.1.4.3
I32 currentGPSTimestampInt	1.3.6.1.4.1.37069.1.4.3.2	Integer32	read-only	The current GPS Timestamp, divde by 1000 to get actual value
STR currentGPSTimestampString	1.3.6.1.4.1.37069.1.4.3.1	DisplayString	read-only	The string used to identify current GPS Timestamp
STR currentGPSTimestampValue	1.3.6.1.4.1.37069.1.4.3.3	DisplayString	read-only	The current GPS Timestamp
currentHeading	1.3.6.1.4.1.37069.1.4.7.2
STR currentHeading360ScaleFloat	1.3.6.1.4.1.37069.1.4.7.2.5	DisplayString	read-only	The current heading in degrees (0 - 360)
I32 currentHeading360ScaleInt	1.3.6.1.4.1.37069.1.4.7.2.4	Integer32	read-only	The current heading in degrees (0 - 360), divde by 100 to get actual value
STR currentHeadingFloat	1.3.6.1.4.1.37069.1.4.7.2.3	DisplayString	read-only	The current heading in degrees (-180 - 180)
I32 currentHeadingInt	1.3.6.1.4.1.37069.1.4.7.2.2	Integer32	read-only	The current heading in degrees (-180 - 180), divde by 100 to get actual value
currentHeadingSection	1.3.6.1.4.1.37069.1.4.7
currentHeadingStatus	1.3.6.1.4.1.37069.1.4.7.1
INT currentHeadingStatusInt	1.3.6.1.4.1.37069.1.4.7.1.2	INTEGER	read-only	The current Heading Status
STR currentHeadingStatusString	1.3.6.1.4.1.37069.1.4.7.1.1	DisplayString	read-only	The string used to identify current Heading Status
STR currentHeadingStatusValue	1.3.6.1.4.1.37069.1.4.7.1.3	DisplayString	read-only	The current Heading Status
STR currentHeadingString	1.3.6.1.4.1.37069.1.4.7.2.1	DisplayString	read-only	The string used to identify current Heading
currentPitch	1.3.6.1.4.1.37069.1.4.8.1
STR currentPitchFloat	1.3.6.1.4.1.37069.1.4.8.1.3	DisplayString	read-only	The current pitch in degrees (-180 - 180)
I32 currentPitchInt	1.3.6.1.4.1.37069.1.4.8.1.2	Integer32	read-only	The current pitch in degrees (-180 - 180), divde by 100 to get actual value
STR currentPitchString	1.3.6.1.4.1.37069.1.4.8.1.1	DisplayString	read-only	The string used to identify current pitch
currentRoll	1.3.6.1.4.1.37069.1.4.8.2
STR currentRollFloat	1.3.6.1.4.1.37069.1.4.8.2.3	DisplayString	read-only	The current roll in degrees (-180 - 180)
I32 currentRollInt	1.3.6.1.4.1.37069.1.4.8.2.2	Integer32	read-only	The current roll in degrees (-180 - 180), divde by 100 to get actual value
STR currentRollString	1.3.6.1.4.1.37069.1.4.8.2.1	DisplayString	read-only	The string used to identify current roll
elevation	1.3.6.1.4.1.37069.1.3.1.4
STR elevationFloat	1.3.6.1.4.1.37069.1.3.1.4.3	DisplayString	read-only	The current elevation from the positioner in degrees
I32 elevationInt	1.3.6.1.4.1.37069.1.3.1.4.2	Integer32	read-only	The current elevation from the positioner in degrees, divde by 100 to get actual value
STR elevationString	1.3.6.1.4.1.37069.1.3.1.4.1	DisplayString	read-only	The string used to identify elevation
linkDistance	1.3.6.1.4.1.37069.1.2.6
I32 linkDistanceMeters	1.3.6.1.4.1.37069.1.2.6.2	Integer32	read-only	The current calculated link distance from the radio in meters
I32 linkDistanceMiles	1.3.6.1.4.1.37069.1.2.6.3	Integer32	read-only	The current calculated link distance from the radio in miles
STR linkDistanceString	1.3.6.1.4.1.37069.1.2.6.1	DisplayString	read-only	The string used to identify Link Distance
linkStatus	1.3.6.1.4.1.37069.1.2.3
INT linkStatusInt	1.3.6.1.4.1.37069.1.2.3.2	INTEGER	read-only	The current link status from the radio 0 = Disconnected, 1 = Marginal, 2 = Connected
STR linkStatusString	1.3.6.1.4.1.37069.1.2.3.1	DisplayString	read-only	The string used to identify Link Status
STR linkStatusVal	1.3.6.1.4.1.37069.1.2.3.3	DisplayString	read-only	The current link status from the radio Disconnected, Marginal, or Connected
localAccel	1.3.6.1.4.1.37069.1.5.8
localGPSAltitude	1.3.6.1.4.1.37069.1.5.6
STR localGPSAltitudeFeetFloat	1.3.6.1.4.1.37069.1.5.6.5	DisplayString	read-only	The local GPS Altitude in feet
I32 localGPSAltitudeFeetInt	1.3.6.1.4.1.37069.1.5.6.4	Integer32	read-only	The local GPS Altitude in feet, divde by 100 to get actual value
STR localGPSAltitudeFloat	1.3.6.1.4.1.37069.1.5.6.3	DisplayString	read-only	The local GPS Altitude in meters, divde by 100 to get actual value
I32 localGPSAltitudeInt	1.3.6.1.4.1.37069.1.5.6.2	Integer32	read-only	The local GPS Altitude in meters, divde by 100 to get actual value
STR localGPSAltitudeString	1.3.6.1.4.1.37069.1.5.6.1	DisplayString	read-only	The string used to identify local GPS Altitude
localGPSHdgAcl	1.3.6.1.4.1.37069.1.5
STR localGPSHdgAclString	1.3.6.1.4.1.37069.1.5.1	DisplayString	read-only	The string used to identify local GPS/Heading/Accel
localGPSLatitude	1.3.6.1.4.1.37069.1.5.4
STR localGPSLatitudeFloat	1.3.6.1.4.1.37069.1.5.4.3	DisplayString	read-only	The local GPS Latitude
I32 localGPSLatitudeInt	1.3.6.1.4.1.37069.1.5.4.2	Integer32	read-only	The local GPS Latitude, divde by 10000 to get actual value
STR localGPSLatitudeString	1.3.6.1.4.1.37069.1.5.4.1	DisplayString	read-only	The string used to identify local GPS Latitude
localGPSLongitude	1.3.6.1.4.1.37069.1.5.5
STR localGPSLongitudeFloat	1.3.6.1.4.1.37069.1.5.5.3	DisplayString	read-only	The local GPS Longitude
I32 localGPSLongitudeInt	1.3.6.1.4.1.37069.1.5.5.2	Integer32	read-only	The local GPS Longitude, divde by 10000 to get actual value
STR localGPSLongitudeString	1.3.6.1.4.1.37069.1.5.5.1	DisplayString	read-only	The string used to identify local GPS Longitude
localGPSStatus	1.3.6.1.4.1.37069.1.5.2
INT localGPSStatusInt	1.3.6.1.4.1.37069.1.5.2.2	INTEGER	read-only	The local GPS Status
STR localGPSStatusString	1.3.6.1.4.1.37069.1.5.2.1	DisplayString	read-only	The string used to identify local GPS Status
STR localGPSStatusValue	1.3.6.1.4.1.37069.1.5.2.3	DisplayString	read-only	The local GPS Status
localGPSTimestamp	1.3.6.1.4.1.37069.1.5.3
I32 localGPSTimestampInt	1.3.6.1.4.1.37069.1.5.3.2	Integer32	read-only	The local GPS Timestamp, divde by 1000 to get actual value
STR localGPSTimestampString	1.3.6.1.4.1.37069.1.5.3.1	DisplayString	read-only	The string used to identify local GPS Timestamp
STR localGPSTimestampValue	1.3.6.1.4.1.37069.1.5.3.3	DisplayString	read-only	The local GPS Timestamp
localHeading	1.3.6.1.4.1.37069.1.5.7.2
STR localHeading360ScaleFloat	1.3.6.1.4.1.37069.1.5.7.2.5	DisplayString	read-only	The local heading in degrees (0 - 360)
I32 localHeading360ScaleInt	1.3.6.1.4.1.37069.1.5.7.2.4	Integer32	read-only	The local heading in degrees (0 - 360), divde by 100 to get actual value
STR localHeadingFloat	1.3.6.1.4.1.37069.1.5.7.2.3	DisplayString	read-only	The local heading in degrees (-180 - 180)
I32 localHeadingInt	1.3.6.1.4.1.37069.1.5.7.2.2	Integer32	read-only	The local heading in degrees (-180 - 180), divde by 100 to get actual value
localHeadingSection	1.3.6.1.4.1.37069.1.5.7
localHeadingStatus	1.3.6.1.4.1.37069.1.5.7.1
INT localHeadingStatusInt	1.3.6.1.4.1.37069.1.5.7.1.2	INTEGER	read-only	The local Heading Status
STR localHeadingStatusString	1.3.6.1.4.1.37069.1.5.7.1.1	DisplayString	read-only	The string used to identify local Heading Status
STR localHeadingStatusValue	1.3.6.1.4.1.37069.1.5.7.1.3	DisplayString	read-only	The local Heading Status
STR localHeadingString	1.3.6.1.4.1.37069.1.5.7.2.1	DisplayString	read-only	The string used to identify local Heading
localPitch	1.3.6.1.4.1.37069.1.5.8.1
STR localPitchFloat	1.3.6.1.4.1.37069.1.5.8.1.3	DisplayString	read-only	The local pitch in degrees (-180 - 180)
I32 localPitchInt	1.3.6.1.4.1.37069.1.5.8.1.2	Integer32	read-only	The local pitch in degrees (-180 - 180), divde by 100 to get actual value
STR localPitchString	1.3.6.1.4.1.37069.1.5.8.1.1	DisplayString	read-only	The string used to identify local pitch
localRoll	1.3.6.1.4.1.37069.1.5.8.2
STR localRollFloat	1.3.6.1.4.1.37069.1.5.8.2.3	DisplayString	read-only	The local roll in degrees (-180 - 180)
I32 localRollInt	1.3.6.1.4.1.37069.1.5.8.2.2	Integer32	read-only	The local roll in degrees (-180 - 180), divde by 100 to get actual value
STR localRollString	1.3.6.1.4.1.37069.1.5.8.2.1	DisplayString	read-only	The string used to identify local roll
networkAccel	1.3.6.1.4.1.37069.1.6.8
networkGPSAltitude	1.3.6.1.4.1.37069.1.6.6
STR networkGPSAltitudeFeetFloat	1.3.6.1.4.1.37069.1.6.6.5	DisplayString	read-only	The network GPS Altitude in feet
I32 networkGPSAltitudeFeetInt	1.3.6.1.4.1.37069.1.6.6.4	Integer32	read-only	The network GPS Altitude in feet, divde by 100 to get actual value
STR networkGPSAltitudeFloat	1.3.6.1.4.1.37069.1.6.6.3	DisplayString	read-only	The network GPS Altitude in meters, divde by 100 to get actual value
I32 networkGPSAltitudeInt	1.3.6.1.4.1.37069.1.6.6.2	Integer32	read-only	The network GPS Altitude in meters, divde by 100 to get actual value
STR networkGPSAltitudeString	1.3.6.1.4.1.37069.1.6.6.1	DisplayString	read-only	The string used to identify network GPS Altitude
networkGPSHdgAcl	1.3.6.1.4.1.37069.1.6
STR networkGPSHdgAclString	1.3.6.1.4.1.37069.1.6.1	DisplayString	read-only	The string used to identify network GPS/Heading/Accel
networkGPSLatitude	1.3.6.1.4.1.37069.1.6.4
STR networkGPSLatitudeFloat	1.3.6.1.4.1.37069.1.6.4.3	DisplayString	read-only	The network GPS Latitude
I32 networkGPSLatitudeInt	1.3.6.1.4.1.37069.1.6.4.2	Integer32	read-only	The network GPS Latitude, divde by 10000 to get actual value
STR networkGPSLatitudeString	1.3.6.1.4.1.37069.1.6.4.1	DisplayString	read-only	The string used to identify network GPS Latitude
networkGPSLongitude	1.3.6.1.4.1.37069.1.6.5
STR networkGPSLongitudeFloat	1.3.6.1.4.1.37069.1.6.5.3	DisplayString	read-only	The network GPS Longitude
I32 networkGPSLongitudeInt	1.3.6.1.4.1.37069.1.6.5.2	Integer32	read-only	The network GPS Longitude, divde by 10000 to get actual value
STR networkGPSLongitudeString	1.3.6.1.4.1.37069.1.6.5.1	DisplayString	read-only	The string used to identify network GPS Longitude
networkGPSStatus	1.3.6.1.4.1.37069.1.6.2
INT networkGPSStatusInt	1.3.6.1.4.1.37069.1.6.2.2	INTEGER	read-only	The network GPS Status
STR networkGPSStatusString	1.3.6.1.4.1.37069.1.6.2.1	DisplayString	read-only	The string used to identify network GPS Status
STR networkGPSStatusValue	1.3.6.1.4.1.37069.1.6.2.3	DisplayString	read-only	The network GPS Status
networkGPSTimestamp	1.3.6.1.4.1.37069.1.6.3
I32 networkGPSTimestampInt	1.3.6.1.4.1.37069.1.6.3.2	Integer32	read-only	The network GPS Timestamp, divde by 1000 to get actual value
STR networkGPSTimestampString	1.3.6.1.4.1.37069.1.6.3.1	DisplayString	read-only	The string used to identify network GPS Timestamp
STR networkGPSTimestampValue	1.3.6.1.4.1.37069.1.6.3.3	DisplayString	read-only	The network GPS Timestamp
networkHeading	1.3.6.1.4.1.37069.1.6.7.2
STR networkHeading360ScaleFloat	1.3.6.1.4.1.37069.1.6.7.2.5	DisplayString	read-only	The network heading in degrees (0 - 360)
I32 networkHeading360ScaleInt	1.3.6.1.4.1.37069.1.6.7.2.4	Integer32	read-only	The network heading in degrees (0 - 360), divde by 100 to get actual value
STR networkHeadingFloat	1.3.6.1.4.1.37069.1.6.7.2.3	DisplayString	read-only	The network heading in degrees (-180 - 180)
I32 networkHeadingInt	1.3.6.1.4.1.37069.1.6.7.2.2	Integer32	read-only	The network heading in degrees (-180 - 180), divde by 100 to get actual value
networkHeadingSection	1.3.6.1.4.1.37069.1.6.7
networkHeadingStatus	1.3.6.1.4.1.37069.1.6.7.1
INT networkHeadingStatusInt	1.3.6.1.4.1.37069.1.6.7.1.2	INTEGER	read-only	The network Heading Status
STR networkHeadingStatusString	1.3.6.1.4.1.37069.1.6.7.1.1	DisplayString	read-only	The string used to identify network Heading Status
STR networkHeadingStatusValue	1.3.6.1.4.1.37069.1.6.7.1.3	DisplayString	read-only	The network Heading Status
STR networkHeadingString	1.3.6.1.4.1.37069.1.6.7.2.1	DisplayString	read-only	The string used to identify network Heading
networkPitch	1.3.6.1.4.1.37069.1.6.8.1
STR networkPitchFloat	1.3.6.1.4.1.37069.1.6.8.1.3	DisplayString	read-only	The network pitch in degrees (-180 - 180)
I32 networkPitchInt	1.3.6.1.4.1.37069.1.6.8.1.2	Integer32	read-only	The network pitch in degrees (-180 - 180), divde by 100 to get actual value
STR networkPitchString	1.3.6.1.4.1.37069.1.6.8.1.1	DisplayString	read-only	The string used to identify network pitch
networkRoll	1.3.6.1.4.1.37069.1.6.8.2
STR networkRollFloat	1.3.6.1.4.1.37069.1.6.8.2.3	DisplayString	read-only	The network roll in degrees (-180 - 180)
I32 networkRollInt	1.3.6.1.4.1.37069.1.6.8.2.2	Integer32	read-only	The network roll in degrees (-180 - 180), divde by 100 to get actual value
STR networkRollString	1.3.6.1.4.1.37069.1.6.8.2.1	DisplayString	read-only	The string used to identify network roll
positioner	1.3.6.1.4.1.37069.1.3
INT positionerConnected	1.3.6.1.4.1.37069.1.3.1.1	INTEGER	read-only	Specifies if the positioner is currently connected
positionerDot1	1.3.6.1.4.1.37069.1.3.1
INT positionerMoving	1.3.6.1.4.1.37069.1.3.1.2	INTEGER	read-only	Specifies if the positioner is currently moving
radio	1.3.6.1.4.1.37069.1.2
INT radioConnected	1.3.6.1.4.1.37069.1.2.2	INTEGER	read-only	Specifies if the radio is currently connected
STR radioName	1.3.6.1.4.1.37069.1.2.1	DisplayString	read-only	Specifies the current radio name
remote	1.3.6.1.4.1.37069.1.2.7
IP remoteIP	1.3.6.1.4.1.37069.1.2.7.2	IpAddress	read-only	The IP address of the remote radio reported from the local radio. NOTE: Not available on all radios
STR remoteMAC	1.3.6.1.4.1.37069.1.2.7.3	DisplayString	read-only	The MAC address of the remote radio reported from the local radio. NOTE: Not available on all radios
STR remoteString	1.3.6.1.4.1.37069.1.2.7.1	DisplayString	read-only	The string used to identify Remote
rssi	1.3.6.1.4.1.37069.1.2.4
STR rssiFloat	1.3.6.1.4.1.37069.1.2.4.3	DisplayString	read-only	The current rssi from the radio
I32 rssiInt	1.3.6.1.4.1.37069.1.2.4.2	Integer32	read-only	The current rssi from the radio, divde by 100 to get actual value
STR rssiString	1.3.6.1.4.1.37069.1.2.4.1	DisplayString	read-only	The string used to identify RSSI
snr	1.3.6.1.4.1.37069.1.2.5
STR snrFloat	1.3.6.1.4.1.37069.1.2.5.3	DisplayString	read-only	The current snr from the radio
I32 snrInt	1.3.6.1.4.1.37069.1.2.5.2	Integer32	read-only	The current snr from the radio, divde by 100 to get actual value
STR snrString	1.3.6.1.4.1.37069.1.2.5.1	DisplayString	read-only	The string used to identify SNR
STR status	1.3.6.1.4.1.37069.1.1.1	DisplayString	read-only	The current system status
INT stowed	1.3.6.1.4.1.37069.1.1.3	INTEGER	read-write	Specifies if the system is currently stowed. When an integer 1 is set, the system will begin stowing. When an integer 0 is set, the system will begin unstowing. (Additional license is required)
system	1.3.6.1.4.1.37069.1.1

RFC description

Automatic Transfer Switch (ATS) MIB. Provides SNMP objects for monitoring and managing automatic transfer switches including power supply status, transfer statistics, and operational metrics on APC and similar UPS systems.

Start monitoring Broadband Antenna Tracking Systems (BATS) ground terminals with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AATS-MIB