active
Module: AATS-MIB
OID (symbolic): AATS-MIB::active
OID (numeric): 1.3.6.1.4.1.37069.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies if the system is currently active. When an integer 1 is set, the system will restart the scan sequence. When an integer 0 is set, the system will stop
What is active?
This OID controls whether the system is actively running (1) or stopped (0) and can be set by the network engineer. Setting this to 1 triggers the device to begin its scan sequence; setting to 0 halts all operations. Example: 1 puts the device into active scanning mode; 0 suspends operations.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.37069.1.1.2 snmpwalk -v2c -c public <target> AATS-MIB::active
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.37069.1.1.2.1 snmpget -v2c -c public <target> AATS-MIB::active.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.37069.1.1.2.1 i <value>
Start monitoring Broadband Antenna Tracking Systems (BATS) ground terminals with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the AATS-MIB::active OID value, configure state conditions and alerts, and monitor any Broadband Antenna Tracking Systems (BATS) ground terminals from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.37069 | aats | AATS-MIB |
| 1.3.6.1.4.1.37069.1 | aatsDot1 | AATS-MIB |
| 1.3.6.1.4.1.37069.1.1 | system | AATS-MIB |
| 1.3.6.1.4.1.37069.1.1.2 | active | AATS-MIB |