ALVARION-SATELLITE-MANAGEMENT-MIB

All MIBs › ALVARION-SATELLITE-MANAGEMENT-MIB

Organization: Alvarion Ltd.

Last Updated: 2007-10-31

Category: Satellite, Vendor: Alvarion

Description: Alvarion satellite management MIB for managing satellite backhaul link parameters and signal quality monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALVARION-SATELLITE-MANAGEMENT-MIB?

ALVARION-SATELLITE-MANAGEMENT-MIB is a vendor enterprise MIB from Alvarion for managing 'satellite' wireless nodes in a master/satellite backhaul topology, tracking each satellite's identity, network configuration, and wireless bridging behavior. It exposes a satellite table with per-node device ID, MAC and IP address, name, SSID, channel number, wireless-to-wireless forwarding mode, master-traffic-only restriction, and management SNMP port, alongside global master settings. Its monitoring value covers both configuration and reachability status: confirming each satellite node is correctly addressed and configured (SSID, channel), and that forwarding/traffic-restriction modes match intended topology, which helps diagnose backhaul link or bridging misconfigurations. It is a self-contained enterprise MIB reflecting Alvarion's own master/satellite wireless architecture rather than an IETF standard. It is deployed in Alvarion point-to-multipoint wireless backhaul networks linking remote sites to a master station. Engineers can download the ALVARION-SATELLITE-MANAGEMENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALVARION-SATELLITE-MANAGEMENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alvarion wireless backhaul satellite/master station equipment

Monitoring Examples

An operator walks satelliteTable/satelliteEntry keyed by satelliteIndex to check satelliteIpAddress, satelliteMacAddress, and satelliteChannelNumber for each remote node, confirming it matches the expected topology under satelliteSSID. If satelliteForwardWirelessToWireless or satelliteMasterTrafficOnly is set incorrectly, traffic could be bridged unexpectedly between satellites rather than routed only through the master, a common source of unexplained wireless congestion. satelliteSNMPPort confirms the management port used to reach each satellite node for further polling.

What Can Be Monitored

satellite node IP/MAC address
configured SSID and channel
wireless-to-wireless forwarding mode
master-traffic-only restriction
management SNMP port per satellite

Imported Objects

From ALVARION-SMI

alvarionMgmtV2

OBJECT-IDENTITY

From ALVARION-TC

AlvarionNotificationEnable
AlvarionSSIDOrNone

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
alvarionSatelliteManagementMIB	1.3.6.1.4.1.12394.1.10.5.7			Alvarion SatelliteManagement MIB.
alvarionSatelliteManagementMIBObjects	1.3.6.1.4.1.12394.1.10.5.7.1
satelliteInfo	1.3.6.1.4.1.12394.1.10.5.7.1.1
satelliteTable	1.3.6.1.4.1.12394.1.10.5.7.1.1.1		not-accessible	The table of all satellite access points currently registered by the Master access point. In tabular form to allow multiple instance on an agent.
satelliteEntry	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1		not-accessible	Information about a Satellite access point currently registered by the Master access point. satelliteIndex - Uniquely identifies a device in the satellite table.
I32 satelliteIndex	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.1	Integer32	not-accessible	Index of a the satellite in the satelliteTable.
STR satelliteDeviceId	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.2	DisplayString	read-only	Device ID of a the satellite in the satelliteTable.
MAC satelliteMacAddress	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.3	MacAddress	read-only	Indicates the MAC address of the wireless radio of the satellite access point.
IP satelliteIpAddress	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.4	IpAddress	read-only	Indicates the IP address of the satellite access point.
STR satelliteName	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.5	DisplayString	read-only	Indicates the name of the satellite access point.
ALV satelliteSSID	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.6	AlvarionSSIDOrNone	read-only	Indicates the SSID of the satellite access point.
U32 satelliteChannelNumber	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.7	Unsigned32	read-only	Indicates the wireless channel number the satellite access point is operating on.
T/F satelliteForwardWirelessToWireless	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.8	TruthValue	read-only	Indicates if the forwarding of traffic between wireless client stations is enabled on the satellite access point. 'true': indicates that the forwarding feature is enabled, 'false': indicates that no forwarding takes place.
T/F satelliteMasterTrafficOnly	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.9	TruthValue	read-only	Indicates if the satellite will only forward traffic that is addressed to the MAC address of the Master access point.
I32 satelliteSNMPPort	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.10	Integer32	read-only	Indicates the SNMP port on which the satellite listens. The value zero is used when no information could be retrieved from the satellite device.
I32 satelliteSecureWebPort	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.11	Integer32	read-only	Indicates the secure web port on which the satellite listens. The value zero is used when no information could be retrieved from the satellite device.
MAC satelliteDeviceMacAddress	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.12	MacAddress	read-only	Indicates the MAC address of the satellite access point bridge interface.
STR satelliteProductName	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.13	DisplayString	read-only	Indicates the Alvarion product name for the device in printable ASCII characters.
STR satelliteFirmwareRevision	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.14	DisplayString	read-only	Indicates the revision number of the device firmware in printable ASCII characters.
STR satelliteGroupName	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.15	DisplayString	read-only	Indicates the location-aware group name of the satellite. The group name is only returned when location-aware is enabled at the satellite. An empty string is returned otherwise.
U32 satelliteChannelNumberRadio2	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.16	Unsigned32	read-only	Indicates the wireless channel number the radio 2 is operating on.
I32 satelliteVLAN	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.17	Integer32	read-only	Management VLAN.
STR satelliteDetectionPort	1.3.6.1.4.1.12394.1.10.5.7.1.1.1.1.18	DisplayString	read-only	The detection packet is send on this interface.
U32 satelliteNumber	1.3.6.1.4.1.12394.1.10.5.7.1.1.2	Unsigned32	read-only	Indicates the number of satellites present in the satellite table.
masterSettings	1.3.6.1.4.1.12394.1.10.5.7.1.2
ALV satelliteUpNotificationEnabled	1.3.6.1.4.1.12394.1.10.5.7.1.2.1	AlvarionNotificationEnable	read-write	Specifies if satelliteUpNotification notifications are generated.
ALV satelliteDownNotificationEnabled	1.3.6.1.4.1.12394.1.10.5.7.1.2.2	AlvarionNotificationEnable	read-write	Specifies if satelliteDownNotification notifications are generated.
alvarionSatelliteManagementMIBNotificationPrefix	1.3.6.1.4.1.12394.1.10.5.7.2
alvarionSatelliteManagementMIBNotifications	1.3.6.1.4.1.12394.1.10.5.7.2.0
NTF satelliteUpNotification	1.3.6.1.4.1.12394.1.10.5.7.2.0.1			Sent when a new satellite is detected.
NTF satelliteDownNotification	1.3.6.1.4.1.12394.1.10.5.7.2.0.2			Sent when a satellite becomes unreachable.
alvarionSatelliteManagementMIBConformance	1.3.6.1.4.1.12394.1.10.5.7.3
alvarionSatelliteManagementMIBCompliances	1.3.6.1.4.1.12394.1.10.5.7.3.1
alvarionSatelliteManagementMIBCompliance	1.3.6.1.4.1.12394.1.10.5.7.3.1.1			The compliance statement for entities which implement the Alvarion SatelliteManagement MIB.
alvarionSatelliteManagementMIBGroups	1.3.6.1.4.1.12394.1.10.5.7.3.2
alvarionSatelliteManagementMIBGroup	1.3.6.1.4.1.12394.1.10.5.7.3.2.1			A collection of objects providing the Satellite Management MIB capability.
alvarionSatelliteNotificationControlGroup	1.3.6.1.4.1.12394.1.10.5.7.3.2.2			A collection of objects providing the Satellite Management MIB notification control capability.
alvarionSatelliteNotificationGroup	1.3.6.1.4.1.12394.1.10.5.7.3.2.3			A collection of supported notifications.

RFC description

Vendor-private MIB for Alvarion wireless satellite management; manages configuration, status, and performance of Alvarion wireless access points.

Start monitoring Alvarion (Cambium) wireless broadband access points/base stations (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALVARION-SATELLITE-MANAGEMENT-MIB

What Is ALVARION-SATELLITE-MANAGEMENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description