Smartoptics AS MIBs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

« All organizations

17 modules from Smartoptics AS

ModuleDescription
SL-OPT-APS-MIBMIB for Automatic Protection Switching on SmartOptics optical channels, configuring primary/backup optical connection pairs with sub-50 ms hardware failover
SL-OSW-MIBMIB for SmartOptics optical switch modules, monitoring per-port input power levels, loss-of-signal thresholds, and switch port operational status
SL-OTN-MIBMIB for Optical Transport Network (OTN) modules on SmartOptics equipment, covering OTU2/OTU2e line-rate configuration, ODU performance monitoring, and fault traps
SL-PM-MIBMIB for performance monitoring data collection on SmartOptics SiteLight devices, supporting 15-minute and daily intervals for GbE, FC, SONET, OTU, ODU, FEC, and optical interface types
SL-PORT-MIBMIB for port LED state management on SmartOptics SiteLight network elements, tracking LED color, blink mode, alarm masks, and port labels
SL-RADIUS-MIBMIB for the RADIUS accounting client on SmartOptics SiteLight network elements, managing server table entries, shared secrets, and client enable/disable state
SL-RETIMER-MIBMIB for signal retimer modules on SmartOptics SiteLight optical transport equipment, providing configuration, status, and performance monitoring for retimed interfaces
SL-ROADM-MIBMIB for Reconfigurable Optical Add/Drop Multiplexer (ROADM) modules on SmartOptics equipment, configuring WSS channel provisioning as express, add, or drop
SL-SECU-MIBMIB for firewall and access-protocol security on SmartOptics SiteLight devices, controlling per-protocol enable/disable for Telnet, SSH, HTTP, HTTPS, SNMP, FTP, TFTP, and TL1
SL-SFP-MIBMIB for SFP transceiver modules on SmartOptics SiteLight equipment, covering configuration, digital diagnostics, tunable wavelength control, and optical traps
SL-SNTP-MIBMIB for the SNTP client on SmartOptics SiteLight network elements, configuring unicast or broadcast time synchronization mode, poll interval, and retry behavior
SL-SONET-ALARM-MIBMIB for SONET alarm management on SmartOptics SiteLight equipment, defining alarm types including LOS, LOF, LOP, AIS, RFI, UNEQ, TIM, SLM, and hardware failure
SL-SONET-APS-MIBMIB for SONET Automatic Protection Switching on SmartOptics SiteLight optical transport, configuring redundant line pairs for sub-50 ms automatic failover
SL-SONET-MIBMIB for SONET/SDH service management on SmartOptics SiteLight equipment, extending RFC 2558 with section, line, and path performance data and overhead configuration
SL-TESTS-MIBMIB for on-demand port loopback tests and diagnostics on Smartoptics SiteLight optical networking equipment
SL-VCG-MIBMIB for Virtual Concatenation Group (VCG) interfaces on Smartoptics SiteLight optical transport devices, covering GFP-F, GFP-T, and POS framing
SL-XPDR-MIBMIB for optical transponder connections and ODU cross-connections on Smartoptics SiteLight gear supporting DS3, GbE, FC, OC-n, and OTN service types