Zhone-GPON-MIB

All MIBs › Zhone-GPON-MIB

Organization: Zhone Technologies, Inc.

Last Updated: 2014-10-29

Category: DSL and Broadband Access

Description: Manages Zhone Technologies GPON OLT and ONT configuration, T-CONT allocation, and optical power levels.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Zhone-GPON-MIB?

Zhone-GPON-MIB is a Zhone Technologies (telecom access equipment vendor) enterprise MIB for Gigabit Passive Optical Network (GPON) equipment, covering both the OLT (Optical Line Terminal) at the carrier's central office and the ONT/ONU at the subscriber premises. Per its module description, it exposes GPON ONU configuration, alarms, and status objects, as well as GPON OLT status information, spanning provisioning data (such as T-CONT bandwidth allocation), alarm/fault notifications, and optical performance data. It is strongly oriented toward hardware and fault status monitoring: administrators use it to track optical power levels (transmit/receive), ONT online/offline/registration status, and active alarm conditions, together indicating the physical health of the fiber link and subscriber terminal. It operates in a GPON access network context, likely layered on top of or alongside standard PON/optical MIBs and the vendor's own chassis/system MIBs for OLT card and port identification. It is used by telecom/ISP operators managing fiber-to-the-home (FTTH) or fiber-to-the-business deployments built on Zhone GPON OLT and ONT hardware. Engineers can download the Zhone-GPON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Zhone-GPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone GPON OLT
Zhone GPON ONT/ONU

Monitoring Examples

No sample objects were provided in the source data, but consistent with the module description an administrator would typically poll ONU/ONT status and alarm tables to check optical receive power and registration state for each subscriber ONT, and a T-CONT allocation table to verify bandwidth assignment. A sudden drop in received optical power or an ONT transitioning to an offline/alarm state would indicate a fiber cut, dirty connector, or failed ONT requiring a truck roll.

What Can Be Monitored

ONT/ONU online/registration status
optical transmit/receive power levels
active alarm conditions
T-CONT bandwidth allocation

Imported Objects

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

From Zhone

apsMIB	OBJECT-IDENTITY
efmCuMIB	OBJECT-IDENTITY
efmOamMIB	OBJECT-IDENTITY
pktcIetfSigMib	OBJECT-IDENTITY
sechtor100	OBJECT-IDENTITY
sechtor300	OBJECT-IDENTITY
sipCommonMIB	OBJECT-IDENTITY
sipTC	OBJECT-IDENTITY
sipUAMIB	OBJECT-IDENTITY
zhoneApon	OBJECT-IDENTITY
zhoneAtm	OBJECT-IDENTITY
zhoneBonding	OBJECT-IDENTITY
zhoneBridge	OBJECT-IDENTITY
zhoneCard	OBJECT-IDENTITY
zhoneCes	OBJECT-IDENTITY
zhoneClass5	OBJECT-IDENTITY
zhoneConsole	OBJECT-IDENTITY
zhoneDrafts	OBJECT-IDENTITY
zhoneDs3Ext	OBJECT-IDENTITY
zhoneDsl	OBJECT-IDENTITY
zhoneDsx	OBJECT-IDENTITY
zhoneEnet	OBJECT-IDENTITY
zhoneGenWtn	OBJECT-IDENTITY
zhoneGpon	OBJECT-IDENTITY
zhoneGroups	OBJECT-IDENTITY
zhoneIma	OBJECT-IDENTITY
zhoneInterfaceGroup	OBJECT-IDENTITY
zhoneInterfaceTranslation	OBJECT-IDENTITY
zhoneIp	OBJECT-IDENTITY
zhoneIsdn	OBJECT-IDENTITY
zhoneLineTypes	OBJECT-IDENTITY
zhoneMalc	OBJECT-IDENTITY
zhoneMasterAgent	OBJECT-IDENTITY
zhoneModules	OBJECT-IDENTITY
zhoneOcx	OBJECT-IDENTITY
zhonePls	OBJECT-IDENTITY
zhonePpp	OBJECT-IDENTITY
zhoneRadio	OBJECT-IDENTITY
zhoneRegCpe	OBJECT-IDENTITY
zhoneRegMalc	OBJECT-IDENTITY
zhoneRegMux	OBJECT-IDENTITY
zhoneRegPls	OBJECT-IDENTITY
zhoneRegSechtor	OBJECT-IDENTITY
zhoneRegWtn	OBJECT-IDENTITY
zhoneShelf	OBJECT-IDENTITY
zhoneShelfIndex	OBJECT-TYPE
zhoneShelfSlotCompliance	MODULE-COMPLY
zhoneShelfSlotGroup	OBJECT-GROUP
zhoneSlotIndex	OBJECT-TYPE
zhoneSonet	OBJECT-IDENTITY
zhoneSs7	OBJECT-IDENTITY
zhoneSubscriber	OBJECT-IDENTITY
zhoneSystem	OBJECT-IDENTITY
zhoneTrapModules	OBJECT-IDENTITY
zhoneVdsl	OBJECT-IDENTITY
zhoneVideo	OBJECT-IDENTITY
zhoneVoice	OBJECT-IDENTITY
zhoneVoiceStats	OBJECT-IDENTITY
zhoneVoip	OBJECT-IDENTITY
zhoneWtn	OBJECT-IDENTITY
zhoneZAP	OBJECT-IDENTITY
zhoneZedge	OBJECT-IDENTITY
zhoneZmsProduct	OBJECT-IDENTITY
zhoneZplex	OBJECT-IDENTITY

From Zhone-TC

ZhoneAdminString
ZhoneEnabledFlag
ZhoneRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
zhoneGponObjectID	1.3.6.1.4.1.5504.5.14.1
zhoneGponOltConfigTable	1.3.6.1.4.1.5504.5.14.1.1		not-accessible	Configuration parameters that apply to one OLT. This profile is auto-created.
zhoneGponOltConfigEntry	1.3.6.1.4.1.5504.5.14.1.1.1		not-accessible	One row of the gpon olt config entry table.
NUM zhoneGponOltIfIndex	1.3.6.1.4.1.5504.5.14.1.1.1.1	InterfaceIndex	not-accessible	The ifIndex of the physical olt interface.
I32 zhoneGponOltConfigMaxRtPropagationDelay	1.3.6.1.4.1.5504.5.14.1.1.1.2	Integer32	read-write	Maximum round trip propagation delay. Combined with max ONU response time and preassigned delay determins maximum logical PON distance. Default 200 usec for 20 dm.
I32 zhoneGponOltConfigMaxOnuResponseTime	1.3.6.1.4.1.5504.5.14.1.1.1.3	Integer32	read-write	Combined with max rt propagation delay, determins maximum logical PON distance.
I32 zhoneGponOltConfigPreassignedEqD	1.3.6.1.4.1.5504.5.14.1.1.1.4	Integer32	read-write	Combined with max rt propagation delay and max onu response time determines max logical PON distance.
I32 zhoneGponOltConfigLosAlpha	1.3.6.1.4.1.5504.5.14.1.1.1.5	Integer32	read-write	Number of loss-of-signal occurrences to trigger alarm.
I32 zhoneGponOltConfigLofAlpha	1.3.6.1.4.1.5504.5.14.1.1.1.6	Integer32	read-write	Number of loss-of-frame occurrences to trigger alarm.
I32 zhoneGponOltConfigLoamAlpha	1.3.6.1.4.1.5504.5.14.1.1.1.7	Integer32	read-write	Number of loss-of-OAM occurrences to trigger alarm.
ZHO zhoneGponOltConfigScrambler	1.3.6.1.4.1.5504.5.14.1.1.1.8	ZhoneEnabledFlag	read-write	Description.
ZHO zhoneGponOltConfigFecMode	1.3.6.1.4.1.5504.5.14.1.1.1.9	ZhoneEnabledFlag	read-write	Enables or disables forward error correction.
ZHO zhoneGponOltConfigAutoLearn	1.3.6.1.4.1.5504.5.14.1.1.1.10	ZhoneEnabledFlag	read-write	Enable or disable password auto-learn mode.
U32 zhoneGponOltConfigPowerLevel	1.3.6.1.4.1.5504.5.14.1.1.1.11	Unsigned32	read-write	Olt power level. For the Broadlight 3000, values will be rounded down to one of 0, 3, or 6.
I32 zhoneGponOltConfigGuardBitCount	1.3.6.1.4.1.5504.5.14.1.1.1.12	Integer32	read-write	Number of guard bits for upstream transmission.
INT zhoneGponOltConfigDbaMode	1.3.6.1.4.1.5504.5.14.1.1.1.13	INTEGER	read-write	Working DBA mode.
I32 zhoneGponOltConfigGemBlockSize	1.3.6.1.4.1.5504.5.14.1.1.1.14	Integer32	read-write	Basic unit in bytes used by all ONUs for DBA reports of their queue occupancy (for piggyback and whole-report DBA only).
I32 zhoneGponOltConfigUsBerInterval	1.3.6.1.4.1.5504.5.14.1.1.1.15	Integer32	read-write	Interval for upstream bit error rate calculation.
I32 zhoneGponOltConfigDsBerInterval	1.3.6.1.4.1.5504.5.14.1.1.1.16	Integer32	read-write	Interval used for downstream bit error rate calculation.
I32 zhoneGponOltConfigBerSfThreshold	1.3.6.1.4.1.5504.5.14.1.1.1.17	Integer32	read-write	Threshold is 10**(-N) for signal fail.
I32 zhoneGponOltConfigBerSdThreshold	1.3.6.1.4.1.5504.5.14.1.1.1.18	Integer32	read-write	Threshold is 10**(-N) for signal degrade. Must exceed sf threshold.
ZHO zhoneGponOltConfigFecRequest	1.3.6.1.4.1.5504.5.14.1.1.1.19	ZhoneEnabledFlag	read-write	Indicates whether OLT turns on FEC indication for all Alloc-Id in the Upstream Bandwidth Map.
ZHO zhoneGponOltConfigKeyExchange	1.3.6.1.4.1.5504.5.14.1.1.1.20	ZhoneEnabledFlag	read-write	Specifies whether Single Key exchange should be performed during ONU activation process.
I32 zhoneGponOltConfigMinRtPropagationDelay	1.3.6.1.4.1.5504.5.14.1.1.1.21	Integer32	read-write	If closest ONU location is known, GPON_stack uses this value in order to limit the size of the quiet zone.
I32 zhoneGponOltConfigMinOnuResponseTime	1.3.6.1.4.1.5504.5.14.1.1.1.22	Integer32	read-write	GPON_stack uses this value in order to limit the size of the quiet zone.
I32 zhoneGponOltConfigEqDMeasureCycles	1.3.6.1.4.1.5504.5.14.1.1.1.23	Integer32	read-write	Defines the number of measurement cycles in the Ranging process.
I32 zhoneGponOltConfigDriftControlInterval	1.3.6.1.4.1.5504.5.14.1.1.1.24	Integer32	read-write	Defines the interval of periodic monitoring on drifts of upstream data.
I32 zhoneGponOltConfigDriftControlLimit	1.3.6.1.4.1.5504.5.14.1.1.1.25	Integer32	read-write	Indicates the limit of upstream data drift.
I32 zhoneGponOltConfigAllocCycleLength	1.3.6.1.4.1.5504.5.14.1.1.1.26	Integer32	read-write	Alloc-ID assignment map cycle length.
I32 zhoneGponOltConfigMinUsAlloc	1.3.6.1.4.1.5504.5.14.1.1.1.27	Integer32	read-write	Size of minimal upstream allocation per frame.
I32 zhoneGponOltConfigAckTimeout	1.3.6.1.4.1.5504.5.14.1.1.1.28	Integer32	read-write	Timeout length of Acknowledge message.
I32 zhoneGponOltConfigPlsMaxAllocSize	1.3.6.1.4.1.5504.5.14.1.1.1.29	Integer32	read-write	Indecates a size of unassigned allocation that should be attached to the end of ranging window.
U32 zhoneGponOltConfigDbaCycle	1.3.6.1.4.1.5504.5.14.1.1.1.30	Unsigned32	read-write	The Dynamic Bandwidth Allocation(dba) cycle determines the DBA interval size. Its an integer multiplicant of 2 milli seconds. The range of values for the dba cycle can be between 2ms-10ms.
U32 zhoneGponOltConfigSrDbaReportingBlockSize	1.3.6.1.4.1.5504.5.14.1.1.1.31	Unsigned32	read-write	For DBA of SR type, the block size defines the resolution of the status reports per PON link.The default value is 48 bytes.
U32 zhoneGponOltConfigProtectionSwitchoverTimer	1.3.6.1.4.1.5504.5.14.1.1.1.32	Unsigned32	read-write	If we receive LOS alarm for a link in Active state, the link state changes to Switch Over Pending state. If the actual switch-over does not happen after this protection-switchover-timeout expires, the link will go back to Active state
ZHO zhoneGponOltConfigPreambleOverride	1.3.6.1.4.1.5504.5.14.1.1.1.33	ZhoneEnabledFlag	read-write	Used to force the OLT to use the Preamble configuration in the OLT configuration profile. Otherwise the Preamble configuration will be determined at runtime and based on the SFP.
OCT zhoneGponOltConfigPreambleType0	1.3.6.1.4.1.5504.5.14.1.1.1.34	OCTET STRING	read-write	Byte number for preamble type 0. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f
OCT zhoneGponOltConfigPreambleType1	1.3.6.1.4.1.5504.5.14.1.1.1.35	OCTET STRING	read-write	Byte number for preamble type 1. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f
OCT zhoneGponOltConfigPreambleType3PreRange	1.3.6.1.4.1.5504.5.14.1.1.1.36	OCTET STRING	read-write	Byte number for preamble type 3 pre-ranging. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f
OCT zhoneGponOltConfigPreambleType3PostRange	1.3.6.1.4.1.5504.5.14.1.1.1.37	OCTET STRING	read-write	Byte number for preamble type 3 post-ranging. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f
OCT zhoneGponOltConfigPreambleType3Pattern	1.3.6.1.4.1.5504.5.14.1.1.1.38	OCTET STRING	read-write	Preamble type 3 pattern. This string represents a hex value with range 0x00 to 0xFF. String must have the following format: 0xNN where where N is 0..9, A..F, a..f
INT zhoneGponOltConfigBipErrorMonitoring	1.3.6.1.4.1.5504.5.14.1.1.1.39	INTEGER	read-write	If in disabled mode, do not report BIP errors, do not disable ONU and do not throw any traps. If in monitorOnly mode, monitor BIP errors and if BIP Error Threshold exceeded, set appropriate zhoneGponOnuStatusWord bits based on the type of BIP errors and throw zhoneGponOnuError trap. If in blockOnError mode, monitor BIP errors and if BIP Error Threshold exceeded, block traffic, disable ONU ranging, set appropriate zhoneGponOnuStatusWord bits based on the type of BIP errors, and throw zhoneGponOnuError and linkDownTrap traps.
I32 zhoneGponOltConfigBipErrorsPerSampleThreshold	1.3.6.1.4.1.5504.5.14.1.1.1.40	Integer32	read-write	If the number of BIP errors per sample exceeds this threshold, it is counted as an errored sample.
I32 zhoneGponOltConfigBipErroredSamplesThreshold	1.3.6.1.4.1.5504.5.14.1.1.1.41	Integer32	read-write	If the number of errored samples exceed this sample threshold, report and disable the onu if in blockOnError mode, otherwise simply report the threshold as being exceeded.
I32 zhoneGponOltConfigBipMaxSampleGap	1.3.6.1.4.1.5504.5.14.1.1.1.42	Integer32	read-write	If two adjancent errored samples were taken farther apart than this threshold, do not count the earlier sample as an errored sample.
INT zhoneGponOltConfigRogueOnuDetection	1.3.6.1.4.1.5504.5.14.1.1.1.43	INTEGER	read-write	Controls detection of rogue ONU on fiber. Values are: 1. detection disabled 2. detect via measurement from rssi process 3. detect via indication from background process. 4. normally off, but switch to rssi mode if rogue is suspected.
I32 zhoneGponOltConfigRogueOnuDetectFrequency	1.3.6.1.4.1.5504.5.14.1.1.1.44	Integer32	read-write	Frequency in seconds for detection background task.
I32 zhoneGponOltConfigRogueOnuRxPowerThreshold	1.3.6.1.4.1.5504.5.14.1.1.1.45	Integer32	read-write	Power level below which to report rssi rogue ONU.
zhoneGponOltOnuConfigTable	1.3.6.1.4.1.5504.5.14.1.2		not-accessible	Configuration parameters applying to a single onu stacked on an olt. This profile is auto-created.
zhoneGponOltOnuConfigEntry	1.3.6.1.4.1.5504.5.14.1.2.1		not-accessible	A row in the gpon olt-onu config table.
NUM zhoneGponOltOnuIfIndex	1.3.6.1.4.1.5504.5.14.1.2.1.1	InterfaceIndex	not-accessible	IfIndex of the onu interface stacked on the olt.
STR zhoneGponOltOnuConfigSerialNoVendorId	1.3.6.1.4.1.5504.5.14.1.2.1.2	ZhoneAdminString	read-write	This is a string of 4 ascii characters representing the vendor ID portion of the onu serial number. Example: 'ZNTS' for Zhone.
STR zhoneGponOltOnuConfigSerialNoVendorSpecific	1.3.6.1.4.1.5504.5.14.1.2.1.3	ZhoneAdminString	read-write	This is a string of ascii decimal digits representing the vendor-specific portion of the onu serial number.
STR zhoneGponOltOnuConfigPassword	1.3.6.1.4.1.5504.5.14.1.2.1.4	ZhoneAdminString	read-write	Password (10 bytes).
ZHO zhoneGponOltOnuConfigAutoLearn	1.3.6.1.4.1.5504.5.14.1.2.1.5	ZhoneEnabledFlag	read-write	Indicates whether password is auto-learned.
I32 zhoneGponOltOnuConfigPowerLevel	1.3.6.1.4.1.5504.5.14.1.2.1.6	Integer32	read-write	Olt power level. For the Broadlight 3000, values will be rounded down to one of 0, 3, or 6.
I32 zhoneGponOltOnuConfigUsBerInterval	1.3.6.1.4.1.5504.5.14.1.2.1.7	Integer32	read-write	Interval for upstream bit error rate calculation.
I32 zhoneGponOltOnuConfigDsBerInterval	1.3.6.1.4.1.5504.5.14.1.2.1.8	Integer32	read-write	Interval for downstream bit error rate.
T/F zhoneGponOltOnuConfigOnuAdded	1.3.6.1.4.1.5504.5.14.1.2.1.9	TruthValue	read-write	Indicates to Broadlight that onu is activated. May not be used.
STR zhoneGponOltOnuConfigOmciFileName	1.3.6.1.4.1.5504.5.14.1.2.1.10	ZhoneAdminString	read-write	Name of OMCI configuration file for this ONT.
STR zhoneGponOltOnuConfigMEProfileName	1.3.6.1.4.1.5504.5.14.1.2.1.11	ZhoneAdminString	read-write	This is the name of a Profile that contains OMCI commands which can configure an ONU. It is expected that this Profile contain OMCI commands that configure the Managed Entities (ME) on an ONU.
STR zhoneGponOltOnuConfigGenericProfileName	1.3.6.1.4.1.5504.5.14.1.2.1.12	ZhoneAdminString	read-write	This is the name of a Profile that contains OMCI commands which can configure an ONU. It is expected that this Profile contain generic commands that are common to multiple ONUs.
ZHO zhoneGponOltOnuConfigPhysicalTraps	1.3.6.1.4.1.5504.5.14.1.2.1.13	ZhoneEnabledFlag	read-write	If enabled, then an asynchronous notification from the ONT with ME class ONT-G triggers an omciOnuAlarms trap. The alarm conditions for this ME class are: equipment alarm, powering alarm, battery missing, battery failure, battery low, physical intrusion alarm, and self-test failure.
ZHO zhoneGponOltOnuConfigOntTraps	1.3.6.1.4.1.5504.5.14.1.2.1.14	ZhoneEnabledFlag	read-write	If enabled, then an asynchronous notification from the ONT with ME class other than ONT-G triggers an omciOnuAlarms trap.
INT zhoneGponOltOnuConfigLineStatusTraps	1.3.6.1.4.1.5504.5.14.1.2.1.15	INTEGER	read-write	If enabled, then gponOnuLineStatusChange traps, and also LinkUp/LinkDown traps, are sent whenever line status changes between up and down. If disabled, none of these traps is sent. If auto, then line status traps are sent if the 'dying gasp' flag is on (for line down), or if the 'dying gasp' flag was on (for line up). Link down/up traps are not sent.
ZHO zhoneGponOltOnuConfigAutoUpgrade	1.3.6.1.4.1.5504.5.14.1.2.1.16	ZhoneEnabledFlag	read-write	If enabled, then the ONU s/w will be upgraded if the ONU version does not match the assoicated remote upgrade profile. Changing this variable to disabled will not abort a remote software upgrade already in progress.
OCT zhoneGponOltOnuConfigSerialNoVendorSpecificFsan	1.3.6.1.4.1.5504.5.14.1.2.1.17	OCTET STRING	read-write	This is a string of ascii decimal digits representing the vendor-specific portion of the onu serial number in hex format ( FSAN ).
ZHO zhoneGponOltOnuConfigUseRegId	1.3.6.1.4.1.5504.5.14.1.2.1.18	ZhoneEnabledFlag	read-write	If enabled, and if the onu is activated, then when an ONT is discovered with a registration ID that matches this ONU's password field, then the ONU will be auto-assigned to that ONT.
OCT zhoneGponOltOnuConfigModel	1.3.6.1.4.1.5504.5.14.1.2.1.19	OCTET STRING	read-only	Model ID returned from this Onu.
OCT zhoneGponOltOnuConfigOntVersion	1.3.6.1.4.1.5504.5.14.1.2.1.20	OCTET STRING	read-only	This object defines the version of the ONT as defined by the vendor. The character value '0' indicates that the version information is not available or applicable.
OCT zhoneGponOltOnuConfigImageVersionActive	1.3.6.1.4.1.5504.5.14.1.2.1.21	OCTET STRING	read-only	Version information for the active s/w image.
OCT zhoneGponOltOnuConfigImageVersionStandby	1.3.6.1.4.1.5504.5.14.1.2.1.22	OCTET STRING	read-only	Version information for the standby s/w image.
INT zhoneGponOltOnuConfigUsRxPowerMonitoring	1.3.6.1.4.1.5504.5.14.1.2.1.23	INTEGER	read-write	If in disabled mode, do not report Upstream Onu Rx Power errors, do not disable ONU and do not throw any traps. If in monitorOnly mode, monitor Upstream Onu Rx Power levels and if level is outside of thresholds, set appropriate zhoneGponOnuStatusWord bits and throw zhoneGponOnuError trap. If in blockOnError mode, monitor Upstream Onu Rx Power levels and if level is outside of thresholds, block traffic, disable ONU ranging, set appropriate zhoneGponOnuStatusWord bits and throw both zhoneGponOnuError and linkDownTrap traps.
I32 zhoneGponOltOnuConfigUsRxPowerHighThreshold	1.3.6.1.4.1.5504.5.14.1.2.1.24	Integer32	read-write	Upstream Receive Power High Threshold value.
I32 zhoneGponOltOnuConfigUsRxPowerLowThreshold	1.3.6.1.4.1.5504.5.14.1.2.1.25	Integer32	read-write	Upstream Receive Power Low Threshold value.
ZHO zhoneGponOltOnuConfigDbaStatusReporting	1.3.6.1.4.1.5504.5.14.1.2.1.26	ZhoneEnabledFlag	read-write	There are two types of DBA, Status Reporting and Non Status Reporting. The value is enabled or disabled. The default is disabled.
U32 zhoneGponOltOnuConfigOmciDataSync	1.3.6.1.4.1.5504.5.14.1.2.1.27	Unsigned32	read-only	If the MIB data sync value returned from the ONU on a MIB audit matches the MXK value, config not required.
U32 zhoneGponOltOnuConfigSnmpDataSync	1.3.6.1.4.1.5504.5.14.1.2.1.28	Unsigned32	read-only	If the SNMP provisioning change value returned from the CPE matches the MXK value, config not required.
I32 zhoneGponOltOnuConfigNextAvailableGemPort	1.3.6.1.4.1.5504.5.14.1.2.1.29	Integer32	read-only	Next available GEM PORT for the ONU.
INT zhoneGponOltOnuConfigAutoConfigState	1.3.6.1.4.1.5504.5.14.1.2.1.30	INTEGER	read-only	Track whether the ONU has been auto-configured.
INT zhoneGponOltOnuConfigLinkStatusAlarmSeverity	1.3.6.1.4.1.5504.5.14.1.2.1.31	INTEGER	read-write	Based on the severity set in this field LinkUp/LinkDown alarms are raised.
zhoneGponPortConfigTable	1.3.6.1.4.1.5504.5.14.1.3		not-accessible	The gpon port is similiar to VCLs in ATM. Data is transferred between OLT and ONU via ports. This profile is dynamically created during CLI bridge-add, host-add, interface-add commands but must be explicitly created during SNMP operation. GEM ports can be created using a supplied I/F index value or using the next available I/F index value. Since the GEM Port is a virtual device, ZMS prefers to supply the I/F index value because ZMS cannot lookup the newly created GEM port using shelf/slot/olt/port indexing ( virual devices do not support these values). How to create a GEM port using next available I/F Index value, using a single SNMP packet with multiple var-binds: 1. Do an SNMP-Next of the object ifIndexNext to determine the I/F index value of the new GEM port. The SNMP-Next will not result in the auto-increment of ifIndexNext. 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.1 = create zhoneGponPortConfigRowShelf.1 = 1 zhoneGponPortConfigRowSlot.1 = GEM port slot zhoneGponPortConfigRowOlt.1 = GEM port OLT zhoneGponPortConfigRowPort.1 = GEM Port ID value zhoneGponPortConfigRowTrafficProfile.1 = traffic profile The GEM port will be created using the next available ifIndex. How to create a GEM port with a specified I/F index value, using a single SNMP packet with multiple var-binds: 1. Do an SNMP-Get of the object ifIndexNext to determine the next available I/F index value. The SNMP-Get will result in the auto-increment of ifIndexNext. 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.aaa = create zhoneGponPortConfigRowShelf.aaa = 1 zhoneGponPortConfigRowSlot.aaa = GEM port slot zhoneGponPortConfigRowOlt.aaa = GEM port OLT zhoneGponPortConfigRowPort.aaa = GEM Port ID value zhoneGponPortConfigRowTrafficProfile.aaa = traffic profile where aaa is the I/F index value collected in step 1. A GEM Port cannot be created if an I/F translate record already exists using the supplied I/F index value. How to delete a GEM port using a single SNMP packet: 1. Determine I/F index of GEM port config profile (aaa) 2. Issue single SNMP set command containing the following: zhoneGponPortConfigRowStatus.aaa = destroy Special Notes: 1. The deletion of a GEM port will be prevented if the GEM port supports bridges, interfaces, etc. 2. The GEM port ID value determines the GEM port ONU.
zhoneGponPortConfigEntry	1.3.6.1.4.1.5504.5.14.1.3.1		not-accessible	A row in the gpon port config table.
NUM zhoneGponPortIfIndex	1.3.6.1.4.1.5504.5.14.1.3.1.1	InterfaceIndex	not-accessible	The ifIndex of the gpon-port interface stacked on the olt.
ZHO zhoneGponPortConfigRowStatus	1.3.6.1.4.1.5504.5.14.1.3.1.2	ZhoneRowStatus	read-create	The row status for the port config table.
T/F zhoneGponPortConfigMulticast	1.3.6.1.4.1.5504.5.14.1.3.1.3	TruthValue	read-create	Specifies whether this is a multicast or unicast port. If unicast, only one onu may be given, and the unicast-onu-id field is used. If multicast is true, then the multicast-onu-ids is used to name the onus.
T/F zhoneGponPortConfigEncrypted	1.3.6.1.4.1.5504.5.14.1.3.1.4	TruthValue	read-create	Specifies whether port-id PLOAM messages are encrypted. Must be false if multicast.
INT zhoneGponPortConfigDirection	1.3.6.1.4.1.5504.5.14.1.3.1.5	INTEGER	read-create	Direction of data for this port.
U32 zhoneGponPortConfigTrafficProfile	1.3.6.1.4.1.5504.5.14.1.3.1.6	Unsigned32	read-create	Index of GEM Port traffic profile for this port. A zero value indicates no GEM Port traffic profile has been selected.
U32 zhoneGponPortConfigRowShelf	1.3.6.1.4.1.5504.5.14.1.3.1.7	Unsigned32	read-create	This is a WRITE-ONLY variable used during port create/delete operations.
U32 zhoneGponPortConfigRowSlot	1.3.6.1.4.1.5504.5.14.1.3.1.8	Unsigned32	read-create	This is a WRITE-ONLY variable used during port create/delete operations.
U32 zhoneGponPortConfigRowOlt	1.3.6.1.4.1.5504.5.14.1.3.1.9	Unsigned32	read-create	This is a WRITE-ONLY variable used during port create/delete operations.
U32 zhoneGponPortConfigRowPort	1.3.6.1.4.1.5504.5.14.1.3.1.10	Unsigned32	read-create	This is a WRITE-ONLY variable used during port create/delete operations.
U32 zhoneGponPortConfigRowTrafficProfile	1.3.6.1.4.1.5504.5.14.1.3.1.11	Unsigned32	read-create	This is a WRITE-ONLY variable used during port create/delete operations.
U32 zhoneGponPortConfigRowOnuId	1.3.6.1.4.1.5504.5.14.1.3.1.12	Unsigned32	read-create	The subPort of the ONU on which this GEM port is to be stacked. This is a write-only variable during row create.
U32 zhoneGponPortConfigTrafficManagementProfileIndex	1.3.6.1.4.1.5504.5.14.1.3.1.13	Unsigned32	read-create	This object points to the associated Traffic Management profile. If there is no traffic control for the GEM port, set it to 0.
zhoneGponAllocIdTable	1.3.6.1.4.1.5504.5.14.1.4		not-accessible	Table for management of upstream bandwidth
zhoneGponAllocIdEntry	1.3.6.1.4.1.5504.5.14.1.4.1		not-accessible	Entry in the gpon allocId table.
I32 zhoneGponAllocIdIndex	1.3.6.1.4.1.5504.5.14.1.4.1.1	Integer32	not-accessible	An Id number which must be unique for a given OLT.
ZHO zhoneGponAllocIdRowStatus	1.3.6.1.4.1.5504.5.14.1.4.1.2	ZhoneRowStatus	read-create	Row status for the gpon alloc-id table.
I32 zhoneGponAllocIdOnuId	1.3.6.1.4.1.5504.5.14.1.4.1.3	Integer32	read-create	The onu number for this olt to which we are allocating bandwidth. Cannot be greater than number of onus for the olt. This field cannot be changed once the alloc-id has been created.
I32 zhoneGponAllocIdGuaranteedBw	1.3.6.1.4.1.5504.5.14.1.4.1.4	Integer32	read-create	Bandwidth guaranteed by this alloc-id. This value is specified in kilobits per second. Only multiples of 512 are allowed, and the value may not exceed 2621440 (i.e. 2.5 gigabits per second).
INT zhoneGponAllocIdTrafficClass	1.3.6.1.4.1.5504.5.14.1.4.1.5	INTEGER	read-create	Whether traffic is Constant Bit Rate or Unspecified Bit Rate.
T/F zhoneGponAllocIdCompensated	1.3.6.1.4.1.5504.5.14.1.4.1.6	TruthValue	read-create	For CBR, indicates whether compensated.
zhoneGponSerialNoTable	1.3.6.1.4.1.5504.5.14.1.5		not-accessible	Table of discovered serial numbers available for assignment to onus.
zhoneGponSerialNoEntry	1.3.6.1.4.1.5504.5.14.1.5.1		not-accessible	Row in the Gpon onu serial number table
NUM zhoneGponSerialNoOltLgIfIndex	1.3.6.1.4.1.5504.5.14.1.5.1.1	InterfaceIndex	not-accessible	Linegroup ifIndex of the Olt on which serial number was discovered.
U32 zhoneGponSerialNoIndexId	1.3.6.1.4.1.5504.5.14.1.5.1.2	Unsigned32	not-accessible	An identifying number, unique within olt, for this discovered onu serial number.
STR zhoneGponSerialNoVendorId	1.3.6.1.4.1.5504.5.14.1.5.1.3	ZhoneAdminString	read-only	The 4-character vendor id portion of serial number.
STR zhoneGponSerialNoVendorSpecific	1.3.6.1.4.1.5504.5.14.1.5.1.4	ZhoneAdminString	read-write	Vendor specific portion of the unassigned onu serial number, a string of decimal digits.
OCT zhoneGponSerialNoTimeStamp	1.3.6.1.4.1.5504.5.14.1.5.1.5	OCTET STRING	read-only	Time, as ascii string, that the serial number was discovered.
zhoneGponTrapPrefix	1.3.6.1.4.1.5504.5.14.1.6			Place-holder object for gpon traps, which must have a final digit of 0 in OID.
zhoneGponTraps	1.3.6.1.4.1.5504.5.14.1.6.0			Traps raised by Gpon Rp.
NTF zhoneGponSerialNumberFound	1.3.6.1.4.1.5504.5.14.1.6.0.1			Notification that an ONU serial number has been discovered.
NTF zhoneGponSerialNumberLost	1.3.6.1.4.1.5504.5.14.1.6.0.2			Notification that a previously discovered ONU serial number is no longer available.
NTF zhoneGponOnuLineStatusChange	1.3.6.1.4.1.5504.5.14.1.6.0.3			Description.
NTF zhoneGponOmciOnuAlarmsTrap	1.3.6.1.4.1.5504.5.14.1.6.0.4			Current active alarms for an ONU entity. Alarms contained in the trap bindings will be for only one specific entity. If an entity alarm is not contained in the trap bindings then the alarm is either not active, not enabled, or not supported. If there are no alarms for the entity, then there will only be one alarm in the trap bindings and that alarm will have a value of zero and the alarm string will be 'None'.
NTF zhoneGponOmciOnuDownloadStatusChange	1.3.6.1.4.1.5504.5.14.1.6.0.5			Trap will be raised for Image Download status changes.
NTF zhoneGponOltOpticsAlarmsTrap	1.3.6.1.4.1.5504.5.14.1.6.0.6			Raised when SFP reports optics alarms condition for an SFP.
NTF zhoneGponOnuError	1.3.6.1.4.1.5504.5.14.1.6.0.7			One of the ONU error conditions is present for the specified ONU. Report zhoneGponOnuStatusWord to indicate which error has occurred.
NTF zhoneGponRogueOnuTrap	1.3.6.1.4.1.5504.5.14.1.6.0.8			A rogue ONU has been detected on this OLT by the background process
NTF zhoneGponRssiRogueOnuTrap	1.3.6.1.4.1.5504.5.14.1.6.0.9			Rogue ONU has been detected by RSSI process on this OLT.
NTF zhoneGponOltStatusWordTrap	1.3.6.1.4.1.5504.5.14.1.6.0.10			Change in one of the gpol olt status word bits has been detected.
NTF zhoneGponOnuAutoAssign	1.3.6.1.4.1.5504.5.14.1.6.0.11			Notification that an ONU ID has been auto assigned.
zhoneGponOnuStatusTable	1.3.6.1.4.1.5504.5.14.1.7		not-accessible	Current status of onu as reported from Gpon driver.
zhoneGponOnuStatusEntry	1.3.6.1.4.1.5504.5.14.1.7.1		not-accessible	Row in the zhoneGponOnuStatusTable.
BIT zhoneGponOnuStatusWord	1.3.6.1.4.1.5504.5.14.1.7.1.1	Bits	read-only	Bit-encoded current onu status from gpon driver
INT zhoneGponOnuOmciState	1.3.6.1.4.1.5504.5.14.1.7.1.2	INTEGER	read-only	Current configuration status for ONU. 1. queued for configuration (waiting) 2. transitional state before configuration (pending) 3. in process of configuration (config) 4. unspecified error (error) 5. configuration successful (done) 6. image download in progress (download) 7. image download aborted (aborted) 8. state cannot be determined (unknown) 9. ONU is down (down) 10. no configuration has been attempted (noConfig) 11. ONU unreachable for RG configuration (rgComError) 12. Some RG commands failed, may impact service (rgServiceSetupErr) 13. OMCI configuration failed (omciFailed) 14. OMCI failed and also ONU unreachable for RG (omciErrAndRgComErr) 15. OMCI failed and also RG commands failed (omciErrAndRgServErr) 16. Some post-config commands failed (postCfgError) 17. OMCI failed and also some post-config commands failed (omciErrAndPostCfgErr)
I32 zhoneGponOnuOpticRssi	1.3.6.1.4.1.5504.5.14.1.7.1.3	Integer32	read-only	RSSI power of the SFP per ONU. The value is in tenths of dB.
I32 zhoneGponOntRxPower	1.3.6.1.4.1.5504.5.14.1.7.1.4	Integer32	read-only	Rx Power as reported by the ONT. The value is in tenths of dB.
OCT zhoneGponOntVersion	1.3.6.1.4.1.5504.5.14.1.7.1.5	OCTET STRING	read-only	This object defines the version of the ONT as defined by the vendor. The character value '0' indicates that the version information is not available or applicable.
U32 zhoneGponOnuDistance	1.3.6.1.4.1.5504.5.14.1.7.1.6	Unsigned32	read-only	Distance from Olt to Ont in meters, as computed from Eqd.
zhoneOnuOmciMEProfileTable	1.3.6.1.4.1.5504.5.14.1.8		not-accessible	Table containing the OMCI commands for the Managed Entities (ME) on an ONU. The following 'how to' examples demonstrate access of the object zhoneOnuOmciMEOmciCommands. How to create ME profile: 1. Determine ME profile instance 2. Place file into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = create zhoneOnuOmciMEProfileName.aaa = ME profile name zhoneOnuOmciMEProfileFilename.aaa = How to update existing ME profile from a file: 1. Determine ME profile instance 2. Place file into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = import zhoneOnuOmciMEProfileName.aaa = ME profile name zhoneOnuOmciMEProfileFilename.aaa = How to extract ME profile into a file: 1. Determine ME profile instance 2. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = export zhoneOnuOmciMEProfileFilename.aaa = 3. The file now exists on uplink file system How to delete ME profile: 1. Determine ME profile instance 2. Issue single SNMP set command containing the following: zhoneOnuOmciMEProfileRowStatus.aaa = destroy
zhoneOnuOmciMEProfileEntry	1.3.6.1.4.1.5504.5.14.1.8.1		not-accessible	Row in the ME Profile table.
U32 zhoneOnuOmciMEProfileIndex	1.3.6.1.4.1.5504.5.14.1.8.1.1	Unsigned32	not-accessible	A unique index for each row entry (1..n).
INT zhoneOnuOmciMEProfileRowStatus	1.3.6.1.4.1.5504.5.14.1.8.1.2	INTEGER	read-create	Row status for the Me profile entry. Not really used for the configuration on the ONUs
OCT zhoneOnuOmciMEProfileName	1.3.6.1.4.1.5504.5.14.1.8.1.3	OCTET STRING	read-create	Name given to each row entry in the ME Profile table. The name must contain ascii printable characters and cannot contain blanks or forward-slash characters. The name must be null-terminated and the null character is included in the object data length. The name must be unique in the ME profiles.
OCT zhoneOnuOmciMEProfileOmciCommands	1.3.6.1.4.1.5504.5.14.1.8.1.4	OCTET STRING	read-create	Contains the set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss. This object cannot be accessed directly. See the comments section for zhoneOnuCmciMEProfileTable on how to acces this object.
OCT zhoneOnuOmciMEProfileFileName	1.3.6.1.4.1.5504.5.14.1.8.1.5	OCTET STRING	read-create	Name of file to be loaded into profile. This object is write-only and is not preserved.
zhoneOnuOmciGenericProfileTable	1.3.6.1.4.1.5504.5.14.1.9		not-accessible	Table containing Generic OMCI commands for an ONU. The Generic profile is 'created' from an existing ME profile. During this operation, the 'variable' defintions from the ME profile are extracted from the ME profile and placed into the Generic profile. The Generic profile is 'updated' from a file placed into the uplink's file system. The following 'how to' examples demonstrate access of the object zhoneOnuOmciGenericOmciCommands. How to create Generic profile from ME profile: 1. Determine Generic profile instance 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = create zhoneOnuOmciGenericProfileName.aaa = profile name zhoneOnuOmciGenericProfileMESrcProfileName = ME profile source 3. Profile is now created and the profile will not contain any variables and values. How to update existing Generic profile from a file: 1. Determine Generic profile instance 2. Place file into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = import zhoneOnuOmciGenericProfileFileName.aaa = How to extract Generic profile into a file: 1. Determine ME profile instance 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = export zhoneOnuOmciGenericProfileFilename.aaa = 3. The file now exists on uplink file system How to delete Generic profile: 1. Determine Generic profile instance 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = destroy
zhoneOnuOmciGenericProfileEntry	1.3.6.1.4.1.5504.5.14.1.9.1		not-accessible	Row in the OMCI Generic Profile table
U32 zhoneOnuOmciGenericProfileIndex	1.3.6.1.4.1.5504.5.14.1.9.1.1	Unsigned32	not-accessible	A unique index for each row entry ( 1..n ).
INT zhoneOnuOmciGenericProfileRowStatus	1.3.6.1.4.1.5504.5.14.1.9.1.2	INTEGER	read-create	Row status for the Generic profile entry. Not really used for the configuration of the ONUs
OCT zhoneOnuOmciGenericProfileName	1.3.6.1.4.1.5504.5.14.1.9.1.3	OCTET STRING	read-create	Name given to each row entry in the Generic Profile table. The name must contain ascii printable characters and cannot contain blanks or forward-slash characters. The name must be null-terminated and the null character is included in the object data length. The name must be unique in the Generic profiles.
OCT zhoneOnuOmciGenericProfileOmciCommands	1.3.6.1.4.1.5504.5.14.1.9.1.4	OCTET STRING	read-create	Contains the generic set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss.
OCT zhoneOnuOmciGenericProfileMESrcProfileName	1.3.6.1.4.1.5504.5.14.1.9.1.5	OCTET STRING	read-create	Name of ME profile used to create the Generic profile. The value for this object is only initialized when the profile is created.
OCT zhoneOnuOmciGenericProfileFileName	1.3.6.1.4.1.5504.5.14.1.9.1.6	OCTET STRING	read-create	Name of file to be loaded into profile. This object is write-only and is not preserved.
zhoneOnuOmciSpecificProfileTable	1.3.6.1.4.1.5504.5.14.1.10		not-accessible	Table containing Specific OMCI commands for an ONU. The Specific profile is 'created' from existing ME and Generic profiles. During this operation, the 'variable' defintions from the ME and Generic profile are extracted from the profiles and placed into the Specific profile. The ME and Generic profile names are extracted from the ONU's Olt/Onu config profile. The Specific profile is 'updated' from a file placed into the uplink's file system. The following 'how to' examples demonstrate access of the object zhoneOnuOmciSpecificOmciCommands. How to create Specific profile from ME and Generic profiles: 1. Determine Specific profile instance (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciSpecificProfileRowStatus.aaa = create zhoneOnuOmciSpecificProfileFileName = 3. The profile is now created and the omciCommands contents have been placed into . The name of the ME profile used to create the Speofic profile is installed into zhoneOnuOmciSpecificProfileMESrcProfile. How to update existing Specific profile from a file: 1. Determine Specific profile instance (from ONU's ifIndex) 2. Place file into uplink file system 3. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = import zhoneOnuOmciGenericProfileFileName.aaa = How to extract Specific profile into a file: 1. Determine Specific profile instance (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = export zhoneOnuOmciGenericProfileFilename.aaa = 3. The file now exists on uplink file system How to delete Specific profile: 1. Determine Specific profile instance (from ONU's ifIndex) 2. Issue single SNMP set command containing the following: zhoneOnuOmciGenericProfileRowStatus.aaa = destroy
zhoneOnuOmciSpecificProfileEntry	1.3.6.1.4.1.5504.5.14.1.10.1		not-accessible	Row in the OMCI Specific Profile table
NUM zhoneOnuOmciSpecificProfileIndex	1.3.6.1.4.1.5504.5.14.1.10.1.1	InterfaceIndex	not-accessible	A unique index for each row entry. The index value corresponds to the ifIndex of the ONU which uses this profile.
INT zhoneOnuOmciSpecificProfileRowStatus	1.3.6.1.4.1.5504.5.14.1.10.1.2	INTEGER	read-create	Row status for the Specific Profile entry. Not really used for the configuration of the ONUs
OCT zhoneOnuOmciSpecificProfileOmciCommands	1.3.6.1.4.1.5504.5.14.1.10.1.3	OCTET STRING	read-create	Contains the Specific set of OMCI commands and the variable substitutions used in configuring the ONUs. This object will go through some character substitution before being inserted into the database so the maximum string size will not be available. Available string size will vary based on string contents but expect about 10 percent loss.
OCT zhoneOnuOmciSpecificProfileMESrcProfileName	1.3.6.1.4.1.5504.5.14.1.10.1.4	OCTET STRING	read-create	Name of ME profile used to create the Specific profile. The value for this object is only initialized when the profile is created.
OCT zhoneOnuOmciSpecificProfileFileName	1.3.6.1.4.1.5504.5.14.1.10.1.5	OCTET STRING	read-create	Name of file to be loaded into profile. This object is write-only and is not preserved.
zhoneGponOmciOnuAlarmsTable	1.3.6.1.4.1.5504.5.14.1.11		not-accessible	A table of all GPON OMCI ONU alarms.
zhoneGponOmciOnuAlarmsEntry	1.3.6.1.4.1.5504.5.14.1.11.1		not-accessible	An entry for each ONU in the zhoneGponOmciOnuAlarmsTable.
OCT zhoneGponOmciOnuAlarmsText	1.3.6.1.4.1.5504.5.14.1.11.1.1	OCTET STRING	read-only	This is a long ascii string which contains the GPON OMCI ONU alarms. Each line of text in this string has the following format: aaa,bbb,ccc,'aaaStr,'bbbStr',d\n where aaa : ME classId ( numeric decimal value ) bbb : alarm index ( numeric decimal value ) ccc : entityId ( numeric decimal value ) aaaStr : string version of ME name bbbStr : string version of alarm name d : alarm severity ( 1=critical, 2=major, 3=minor, 4=warning ) The ME classId is the standard value from the 'Managed entity identifiers' table of G984.4. The alarm index is the zero-based index (G984.4 or G983.2) within the ME class. the entityId is the physical port number on the ONT. Here is a sample: 11,0,513,'PptpEthUni','LanLos',2\n 256,1,0,'OntG','PoweringAlarm',3\n If this string has zero length then there are no active alarms. If this string has a single entry with a classId of 65535 then the alarm collection failed. WARNING! In this description, replace the sinqle quote characters with double quote characters! The Zhone scripts have problems with double quote characters!
zhoneGponTrafficProfileTable	1.3.6.1.4.1.5504.5.14.1.12		not-accessible	A table of the GPON GEM Port Traffic profiles.
zhoneGponTrafficProfileEntry	1.3.6.1.4.1.5504.5.14.1.12.1		not-accessible	Row in the zhoneGponPortTrafProfileTable.
U32 zhoneGponTrafficProfileIndex	1.3.6.1.4.1.5504.5.14.1.12.1.1	Unsigned32	not-accessible	Used to index an entry in the GEM port traffic profile table
ZHO zhoneGponTrafficProfileRowStatus	1.3.6.1.4.1.5504.5.14.1.12.1.2	ZhoneRowStatus	read-create	The row status for the GEM Port Traffic profile.
I32 zhoneGponTrafficProfileGuaranteedUpstreamBw	1.3.6.1.4.1.5504.5.14.1.12.1.3	Integer32	read-create	Bandwidth guaranteed by this alloc-id. This value is specified in kilobits per second. Only multiples of 512 are allowed, and the value may not exceed 2621440 (i.e. 2.5 gigabits per second).
INT zhoneGponTrafficProfileClass	1.3.6.1.4.1.5504.5.14.1.12.1.4	INTEGER	read-create	Whether traffic is Constant Bit Rate or Unspecified Bit Rate.
T/F zhoneGponTrafficProfileCompensated	1.3.6.1.4.1.5504.5.14.1.12.1.5	TruthValue	read-create	For CBR, indicates whether compensated.
T/F zhoneGponTrafficProfileShared	1.3.6.1.4.1.5504.5.14.1.12.1.6	TruthValue	read-create	TRUE if the GEM Port which uses this traffic descriptor shares and allocation ID with another GEM port. FALSE otherwise. When used more than once in the same ONU, the GEM ports are assigned the same alloc-id value.
T/F zhoneGponTrafficProfileDbaEnabled	1.3.6.1.4.1.5504.5.14.1.12.1.7	TruthValue	read-create	A flag to indicate if dynamic or static bandwidth allocation is used. The default value of DbaEnabled is false.
U32 zhoneGponTrafficProfileDbaFixedUsUbrBw	1.3.6.1.4.1.5504.5.14.1.12.1.8	Unsigned32	read-create	Fixed UBR bandwidth will be always allocated UBR bandwidth. The min values of Fixed Ubr bandwidth can be 0 or 128kilo bits per second.Only multiples of 64 kilobits per second are allowed.
U32 zhoneGponTrafficProfileDbaFixedUsCbrBw	1.3.6.1.4.1.5504.5.14.1.12.1.9	Unsigned32	read-create	Fixed CBR bandwidth will be always allocated CBR bandwidth. The min value of Fixed Cbr bandwidth can be 0 or 512 kilobits per second.Only multiples of 64 kilo bits per second are allowed.
U32 zhoneGponTrafficProfileDbaAssuredUsBw	1.3.6.1.4.1.5504.5.14.1.12.1.10	Unsigned32	read-create	DBA Assured bandwidth will be allocated when traffic demand exists. The min value of Assured bandwidth can be 0 or 256 kilobits per second. Only multiples of 64 kilo bits per second are allowed.
U32 zhoneGponTrafficProfileMaxUsBw	1.3.6.1.4.1.5504.5.14.1.12.1.11	Unsigned32	read-create	The Max Bandwidth value should be larger or equal to the sum of Fixed UBR, Fixed CBR and Assured.The increments should be done in the order of 64 kilobits per second.The default value of maximum bandwidth is 0.
INT zhoneGponTrafficProfileExtraUsBwType	1.3.6.1.4.1.5504.5.14.1.12.1.12	INTEGER	read-create	Extra Bandwidth = MaxBw - (Assured+FixedUbr+FixedCbr) The two Extra bandwidth types supported are : 1.nonassured 2.besteffort By default the value is nonassured.Nonassured has higher priority for getting unused bandwidth than besteffort.
zhoneGponPortStatusTable	1.3.6.1.4.1.5504.5.14.1.13		not-accessible	Current status of GEM port as reported from Gpon driver.
zhoneGponPortStatusEntry	1.3.6.1.4.1.5504.5.14.1.13.1		not-accessible	Row in the zhoneGponPortStatusTable.
U32 zhoneGponPortStatusAllocId	1.3.6.1.4.1.5504.5.14.1.13.1.1	Unsigned32	read-only	The current dynamic alloc-id value for the GEM port.
INT zhoneGponPortStatusDbaStatus	1.3.6.1.4.1.5504.5.14.1.13.1.2	INTEGER	read-only	The current DBA status for this GEM port. DBA status reporting is on a per-ONU basis. All GEM ports on the ONU will report the same value. Possible values: sr - DBA type is SR and there is no error nsr - DBA type is NSR and there is no error nsrError - DBA type is NSR and there is an error or the ONU does not support NSR notEnabled - DBA has been disabled notAvailable - cannot communicate with ONU notAdded - ONU is not added to the OLT error - internal error prevents data collection
zhoneGponOmciStatsCurrentTable	1.3.6.1.4.1.5504.5.14.1.14		not-accessible	Table of current-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.
zhoneGponOmciStatsCurrentEntry	1.3.6.1.4.1.5504.5.14.1.14.1		not-accessible	Row in zhoneGponOmciStatsCurrentTable. Each row retrieves counters for the current 15-minute interval for one managed entity on one logical port of one ONT.
U32 zhoneGponOmciStatsCurrentMEId	1.3.6.1.4.1.5504.5.14.1.14.1.1	Unsigned32	not-accessible	This is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.
U32 zhoneGponOmciStatsCurrentLogicalPort	1.3.6.1.4.1.5504.5.14.1.14.1.2	Unsigned32	not-accessible	This specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
OCT zhoneGponOmciStatsCurrentText	1.3.6.1.4.1.5504.5.14.1.14.1.3	OCTET STRING	read-only	Blob of statistics information returned. Format is: PhysPort,I1,A1,I2,A2,...In,An where PhysPort - physical port ID value Ii = attribute index (0-15, ascii-coded decimal integer) within ME according to G984,4 standard. Ai = attribute value (counter, ascii-coded decimal integer) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.
zhoneGponOmciStatsPreviousTable	1.3.6.1.4.1.5504.5.14.1.15		not-accessible	Table of previous-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.
zhoneGponOmciStatsPreviousEntry	1.3.6.1.4.1.5504.5.14.1.15.1		not-accessible	Row in zhoneGponOmciStatsPreviousTable. Each row retrieves counters for the last completed 15-minute interval for one managed entity on one logical port of one ONT.
U32 zhoneGponOmciStatsPreviousMEId	1.3.6.1.4.1.5504.5.14.1.15.1.1	Unsigned32	not-accessible	This is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.
U32 zhoneGponOmciStatsPreviousLogicalPort	1.3.6.1.4.1.5504.5.14.1.15.1.2	Unsigned32	not-accessible	This specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
OCT zhoneGponOmciStatsPreviousText	1.3.6.1.4.1.5504.5.14.1.15.1.3	OCTET STRING	read-only	Blob of statistics information returned. Format is: PhysPort,I1,A1,I2,A2,...In,An where PhysPort - physical port ID value Ii = attribute index (0-15, ascii-coded decimal integer) within ME according to G984,4 standard. Ai = attribute value (counter, ascii-coded decimal integer) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.
zhoneGponOmciStatusTable	1.3.6.1.4.1.5504.5.14.1.16		not-accessible	Table of current-interval statistics gathered via OMCI from ONT's as specified in the ME profiles used by that ONT.
zhoneGponOmciStatusEntry	1.3.6.1.4.1.5504.5.14.1.16.1		not-accessible	Row in zhoneGponOmciStatsCurrentTable. Each row retrieves counters for the current 15-minute interval for one managed entity on one logical port of one ONT.
U32 zhoneGponOmciStatusMEId	1.3.6.1.4.1.5504.5.14.1.16.1.1	Unsigned32	not-accessible	This is the ID of the managed entity in the ITU G984.4 standard for the OMCI statistics we want to read.
U32 zhoneGponOmciStatusLogicalPort	1.3.6.1.4.1.5504.5.14.1.16.1.2	Unsigned32	not-accessible	This specifies which entity on the ONT we want the statistics for. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
OCT zhoneGponOmciStatusText	1.3.6.1.4.1.5504.5.14.1.16.1.3	OCTET STRING	read-only	Blob of status information returned. Format is: PhysPort,attrId1,attrName1,attrNumValue1,attrStrValue1... attrIdn,attrNamen,attrNumValuen,attrStrValuen where PhysPort - physical port ID value attrIdn = index number (0-15) of the attribute within the the ME (ascii decimal) attrNamen = name of the attribute (returned by OCS) attrNumValuen = value of the attribute (ascii decimal) attrStrValuen = interpreted value ( 'up', 'down', etc ) n = number of attributes returned = number requested. Maximum number of attributes per ME is 16.
zhoneGponOmciOnuRebootTable	1.3.6.1.4.1.5504.5.14.1.17		not-accessible	Table of objects used to reboot an ONU via the OMCI.
zhoneGponOmciOnuRebootEntry	1.3.6.1.4.1.5504.5.14.1.17.1		not-accessible	A single entry in the table
INT zhoneGponOmciOnuReboot	1.3.6.1.4.1.5504.5.14.1.17.1.1	INTEGER	read-create	Set this object to 'reboot to reboot an ONU. The reboot command is sent to the ONU over the OMCI. Successful transmission of the reboot command to the ONU does no guarantee the ONU will reboot. The ONU may be in a fatal lockup which prevents the processing of the reboot command.
zhoneGponOmciOnuPortAdminTable	1.3.6.1.4.1.5504.5.14.1.18		not-accessible	Table of objects used to configure the admin state of a physical port on an ONU.
zhoneGponOmciOnuPortAdminEntry	1.3.6.1.4.1.5504.5.14.1.18.1		not-accessible	A single entry in the table
U32 zhoneGponOmciOnuPortAdminMEId	1.3.6.1.4.1.5504.5.14.1.18.1.1	Unsigned32	not-accessible	This is the ID of the managed entity in the ITU G984.4 standard.
U32 zhoneGponOmciOnuPortAdminLogicalPort	1.3.6.1.4.1.5504.5.14.1.18.1.2	Unsigned32	not-accessible	This specifies which entity on the ONT we want. This is a logical number (1,2,...) which is translated according to the ME profile into an entity ID which is included in the command to the ONT.
INT zhoneGponOmciOnuPortAdminState	1.3.6.1.4.1.5504.5.14.1.18.1.3	INTEGER	read-create	This object is used to place an ONU physical port in a DOWN or UP state. This state is a configuration parameter and is preserved.
INT zhoneGponOmciOnuPortAdminAutoDetect	1.3.6.1.4.1.5504.5.14.1.18.1.4	INTEGER	read-create	This object is used to set the auto detection rate of an ONU physical port.This state is a configuration parameter and is preserved.
zhoneGponOmciOnuImageUpgradeTable	1.3.6.1.4.1.5504.5.14.1.19		not-accessible	This table is used to perform ONU software upgrades. There is one table entry for each ONU. Each ONU is addressed by it's ifIndex.
zhoneGponOmciOnuImageUpgradeEntry	1.3.6.1.4.1.5504.5.14.1.19.1		not-accessible	An entry for one ONU.
INT zhoneGponOmciOnuImageUpgradeAction	1.3.6.1.4.1.5504.5.14.1.19.1.1	INTEGER	read-create	Which software upgrade action to perform.
OCT zhoneOnuOmciImageUpgradeFilename	1.3.6.1.4.1.5504.5.14.1.19.1.2	OCTET STRING	read-create	Name of file to be loaded downloaded to ONU. Required on download actions.
INT zhoneGponOmciOnuImageUpgradePartition	1.3.6.1.4.1.5504.5.14.1.19.1.3	INTEGER	read-create	Optional on all actions. Indicates which partition or 'none'in which case default is to use inactive partition for download or activate action, or to the uncommitted partion for commit action. On a read, returns the partition used for current or latest upgrade.
OCT zhoneOnuOmciImageUpgradeImageVersionPartition0	1.3.6.1.4.1.5504.5.14.1.19.1.4	OCTET STRING	read-only	Version information for s/w image loaded into partition 0.
OCT zhoneOnuOmciImageUpgradeImageVersionPartition1	1.3.6.1.4.1.5504.5.14.1.19.1.5	OCTET STRING	read-only	Version information for s/w image loaded into partition 1.
INT zhoneOnuOmciImageUpgradeIsCommittedPartition0	1.3.6.1.4.1.5504.5.14.1.19.1.6	INTEGER	read-only	Current commit status for partition 0.
INT zhoneOnuOmciImageUpgradeIsCommittedPartition1	1.3.6.1.4.1.5504.5.14.1.19.1.7	INTEGER	read-only	Current commit status for partition 1.
INT zhoneOnuOmciImageUpgradeIsActivatedPartition0	1.3.6.1.4.1.5504.5.14.1.19.1.8	INTEGER	read-only	Current activated status for partition 0.
INT zhoneOnuOmciImageUpgradeIsActivatedPartition1	1.3.6.1.4.1.5504.5.14.1.19.1.9	INTEGER	read-only	Current activated status for partition 1.
INT zhoneOnuOmciImageUpgradeIsValidPartition0	1.3.6.1.4.1.5504.5.14.1.19.1.10	INTEGER	read-only	Current valid status for partition 0.
INT zhoneOnuOmciImageUpgradeIsValidPartition1	1.3.6.1.4.1.5504.5.14.1.19.1.11	INTEGER	read-only	Current valid status for partition 0.
ONU zhoneOnuOmciImageUpgradeDownloadStatus	1.3.6.1.4.1.5504.5.14.1.19.1.12	OnuUpgradeState	read-only	Current s/w image download status.
OCT zhoneGponOmciOnuImageUpgradeModel	1.3.6.1.4.1.5504.5.14.1.19.1.13	OCTET STRING	read-only	Model id read from this onu.
OCT zhoneGponOmciOnuImageUpgradeStartTime	1.3.6.1.4.1.5504.5.14.1.19.1.14	OCTET STRING	read-only	Start time, as ascii string, of most recent upgrade.
T/F zhoneGponOmciOnuImageUpgradeWillBeActivated	1.3.6.1.4.1.5504.5.14.1.19.1.15	TruthValue	read-only	If true, the downloaded image will be activated when download completes.
T/F zhoneGponOmciOnuImageUpgradeWillBeCommitted	1.3.6.1.4.1.5504.5.14.1.19.1.16	TruthValue	read-only	If true, this image will be committed on successful activation.
INT zhoneGponOmciOnuImageUpgradeType	1.3.6.1.4.1.5504.5.14.1.19.1.17	INTEGER	read-only	Indicates the reason for the upgrade.
INT zhoneGponOmciOnuImageDownloadProgressPercentage	1.3.6.1.4.1.5504.5.14.1.19.1.18	INTEGER	read-only	Image download progress. This object is only valid during image download.
INT zhoneGponOmciOnuImageUpgradeMethod	1.3.6.1.4.1.5504.5.14.1.19.1.19	INTEGER	read-only	The download method used for upgrading this ONU. TFTP is used where possible, else OMCI (default).
zhoneGponOltStatusTable	1.3.6.1.4.1.5504.5.14.1.20		not-accessible	Current Status of OLT as reported from the Gpon Driver.
zhoneGponOltStatusEntry	1.3.6.1.4.1.5504.5.14.1.20.1		not-accessible	Row in the zhoneGponOltStatusTable.
I32 zhoneGponOltOpticTemperature	1.3.6.1.4.1.5504.5.14.1.20.1.1	Integer32	read-only	Internally measured Tranceiver Temperature of the OLT in Celcius.
U32 zhoneGponOltOpticVoltage	1.3.6.1.4.1.5504.5.14.1.20.1.2	Unsigned32	read-only	Internally measured Tranceiver Supply Voltage of the OLT in Volts. The measured value will be in the order of hundredths of Volts.
U32 zhoneGponOltOpticTxBiasCurrent	1.3.6.1.4.1.5504.5.14.1.20.1.3	Unsigned32	read-only	Measured Tx Bias current per OLT in milli Amperes.
I32 zhoneGponOltOpticTxPower	1.3.6.1.4.1.5504.5.14.1.20.1.4	Integer32	read-only	Measured Tx Output Power of the OLT in dB. The measured value will be in tenths of dB.
INT zhoneGponOltOpticStatus	1.3.6.1.4.1.5504.5.14.1.20.1.5	INTEGER	read-only	When the End Of Life(EOL) Alarm bit is set an alarm will be raised. Alarm is set at about 150% of original current.Alarm will be level Major. It will be cleared when the SFP is replaced, or when the Alarm bit is cleared. Warning indication will be provided when user asks for status. Warning is set when EOL is at about 130% original current.
BIT zhoneGponOltOpticAlarms	1.3.6.1.4.1.5504.5.14.1.20.1.6	Bits	read-only	Bitmap of alarm conditions present, as reported from the SFP.
BIT zhoneGponOltStatusWord	1.3.6.1.4.1.5504.5.14.1.20.1.7	Bits	read-only	The bit-coded OLT status word.
U32 zhoneGponOltConfiguredOnuCount	1.3.6.1.4.1.5504.5.14.1.20.1.8	Unsigned32	read-only	Count of the ONUs on this OLT where onu-added = TRUE.
U32 zhoneGponOltActiveOnuCount	1.3.6.1.4.1.5504.5.14.1.20.1.9	Unsigned32	read-only	Number of ONUs on this OLT currently in operational state UP.
zhoneGponOltDbaStatusTable	1.3.6.1.4.1.5504.5.14.1.21		not-accessible	Current status of OLT DBA as reported from CAC.
zhoneGponOltDbaStatusEntry	1.3.6.1.4.1.5504.5.14.1.21.1		not-accessible	Row in the zhoneGponOltDbaStatusTable.
U32 zhoneGponOltDbaTotalAvailableBw	1.3.6.1.4.1.5504.5.14.1.21.1.1	Unsigned32	read-only	The Total Available DBA Bandwidth per OLT.The unit is Kilobits( 1000 bits).
U32 zhoneGponOltDbaTotalAvailableCompensatedCbrBw	1.3.6.1.4.1.5504.5.14.1.21.1.2	Unsigned32	read-only	The Total Available DBA Compensated CBR bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaAllocatedUbrBw	1.3.6.1.4.1.5504.5.14.1.21.1.3	Unsigned32	read-only	The Total Available DBA Allocated UBR bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaAllocatedCbrBw	1.3.6.1.4.1.5504.5.14.1.21.1.4	Unsigned32	read-only	The Total Available DBA Allocated CBR bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaAllocatedCompensatedCbrBw	1.3.6.1.4.1.5504.5.14.1.21.1.5	Unsigned32	read-only	The Total Available DBA Allocated CBR Compensated bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaAllocatedAssuredBw	1.3.6.1.4.1.5504.5.14.1.21.1.6	Unsigned32	read-only	The Total Available DBA Allocated Assured bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaAllocatedNonAssuredBw	1.3.6.1.4.1.5504.5.14.1.21.1.7	Unsigned32	read-only	The Total Available DBA Allocated Non Assured bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaAllocatedBestEffortBw	1.3.6.1.4.1.5504.5.14.1.21.1.8	Unsigned32	read-only	The Total Available DBA Allocated Best Effort bandwidth per OLT. The unit is Kilobits(1000 bits).
U32 zhoneGponOltDbaMaxAllocIds	1.3.6.1.4.1.5504.5.14.1.21.1.9	Unsigned32	read-only	Maximum number of alloc-Ids supported by this OLT.
U32 zhoneGponOltDbaAvailAllocIds	1.3.6.1.4.1.5504.5.14.1.21.1.10	Unsigned32	read-only	Total number of available alloc-Ids for this OLT.
U32 zhoneGponOltDbaUsedAllocIds	1.3.6.1.4.1.5504.5.14.1.21.1.11	Unsigned32	read-only	Total number of alloc-Ids in use for this OLT.
U32 zhoneGponOltDbaMaxDbaAllocIds	1.3.6.1.4.1.5504.5.14.1.21.1.12	Unsigned32	read-only	Maximum number of DBA alloc-Ids supported by this OLT.
U32 zhoneGponOltDbaAvailDbaAllocIds	1.3.6.1.4.1.5504.5.14.1.21.1.13	Unsigned32	read-only	Total number of available DBA alloc-Ids for this OLT.
U32 zhoneGponOltDbaUsedDbaAllocIds	1.3.6.1.4.1.5504.5.14.1.21.1.14	Unsigned32	read-only	Total number of DBA alloc-Ids in use for this OLT.
U32 zhoneGponOltDbaTotalOltGemPorts	1.3.6.1.4.1.5504.5.14.1.21.1.15	Unsigned32	read-only	Total number GEM Ports currently on this OLT.
GPO zhoneGponOltDbaLastCacRc	1.3.6.1.4.1.5504.5.14.1.21.1.16	GponCacRc	read-only	This object contains the result code of the last GPON CAC request for the OLT.
zhoneGponUpgradeByStateTable	1.3.6.1.4.1.5504.5.14.1.22		not-accessible	Information about onu upgrade.
zhoneGponUpgradeByStateEntry	1.3.6.1.4.1.5504.5.14.1.22.1		not-accessible	Row in onu upgrade table.
I32 zhoneGponUpgradeOlt	1.3.6.1.4.1.5504.5.14.1.22.1.1	Integer32	not-accessible	Olt number on the card.
I32 zhoneGponUpgradeOnu	1.3.6.1.4.1.5504.5.14.1.22.1.2	Integer32	not-accessible	Onu number within olt.
OCT zhoneGponUpgradeModel	1.3.6.1.4.1.5504.5.14.1.22.1.3	OCTET STRING	read-only	Model ID returned from this Onu.
OCT zhoneGponUpgradeStartTime	1.3.6.1.4.1.5504.5.14.1.22.1.4	OCTET STRING	read-only	Last upgrade start time, as ascii string
NUM zhoneGponUpgradeIfIndex	1.3.6.1.4.1.5504.5.14.1.22.1.5	InterfaceIndex	read-only	Onu ifIndex
ONU zhoneGponUpgradeByStateOnuState	1.3.6.1.4.1.5504.5.14.1.22.1.6	OnuUpgradeState	read-only	The actual upgrade state of the onu.
T/F zhoneGponUpgradeByStateWillBeActivated	1.3.6.1.4.1.5504.5.14.1.22.1.7	TruthValue	read-only	If true, the image will be activated if download is successful.
T/F zhoneGponUpgradeByStateWillBeCommitted	1.3.6.1.4.1.5504.5.14.1.22.1.8	TruthValue	read-only	If true, image will be committed after successful activation.
INT zhoneGponUpgradeByStateUpgradeType	1.3.6.1.4.1.5504.5.14.1.22.1.9	INTEGER	read-only	Indicates the reason for the upgrade.
INT zhoneGponUpgradeByStatePartition	1.3.6.1.4.1.5504.5.14.1.22.1.10	INTEGER	read-only	If upgrade has been requested, this is the image partition of the latest upgrade.
INT zhoneGponUpgradeProgressPercentage	1.3.6.1.4.1.5504.5.14.1.22.1.11	INTEGER	read-only	Image download progress. This object is only valid during image download.
INT zhoneGponUpgradeByStateMethod	1.3.6.1.4.1.5504.5.14.1.22.1.12	INTEGER	read-only	The download method used for upgrading this ONU. TFTP is used where possible, else OMCI (default).
zhoneGponCmd	1.3.6.1.4.1.5504.5.14.1.23
INT zhoneGponCmdOperation	1.3.6.1.4.1.5504.5.14.1.23.1	INTEGER	read-write	GPON Command operation. This object must be supplied with each operation.
BIT zhoneGponCmdFilterMask	1.3.6.1.4.1.5504.5.14.1.23.2	Bits	read-write	GPON Command operation filter. This object must be supplied with each operation.
U32 zhoneGponCmdShelf	1.3.6.1.4.1.5504.5.14.1.23.3	Unsigned32	read-write	GPON command 'SHELF' filter value. This parameter is for future use and is currently not supported.
U32 zhoneGponCmdSlot	1.3.6.1.4.1.5504.5.14.1.23.4	Unsigned32	read-write	GPON command 'SLOT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).
U32 zhoneGponCmdOlt	1.3.6.1.4.1.5504.5.14.1.23.5	Unsigned32	read-write	GPON command 'OLT' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).
U32 zhoneGponCmdOnu	1.3.6.1.4.1.5504.5.14.1.23.6	Unsigned32	read-write	GPON command 'ONU' filter value. If this object is included in the SNMP packet then the associated filter must be enabled in the filter (zhoneGponCmdFilterMask).
zhoneGponOltStatisticsTable	1.3.6.1.4.1.5504.5.14.1.24		not-accessible	Per OLT statistics gathered from Broadlight device.
zhoneGponOltStatisticsEntry	1.3.6.1.4.1.5504.5.14.1.24.1		not-accessible	Per OLT statistics gathered from Broadlight device.
C64 zhoneGponOltStatisticsUpstreamValidGemFrames	1.3.6.1.4.1.5504.5.14.1.24.1.1	Counter64	read-only	UpstreamValidGemFrames counter.
C64 zhoneGponOltStatisticsUpstreamDiscardedFrames	1.3.6.1.4.1.5504.5.14.1.24.1.2	Counter64	read-only	UpstreamDiscardedFrames counter.
C64 zhoneGponOltStatisticsUpstreamGemFrames	1.3.6.1.4.1.5504.5.14.1.24.1.3	Counter64	read-only	UpstreamGemFrames counter.
C64 zhoneGponOltStatisticsUpstreamOmciFrames	1.3.6.1.4.1.5504.5.14.1.24.1.4	Counter64	read-only	UpstreamOmciFrames counter.
C64 zhoneGponOltStatisticsUpstreamPloamFrames	1.3.6.1.4.1.5504.5.14.1.24.1.5	Counter64	read-only	UpstreamPloamFrames counter.
C64 zhoneGponOltStatisticsUpstreamIdlePloamFrames	1.3.6.1.4.1.5504.5.14.1.24.1.6	Counter64	read-only	UpstreamIdlePloamFrames counter.
C64 zhoneGponOltStatisticsDownstreamValidGemFrames	1.3.6.1.4.1.5504.5.14.1.24.1.7	Counter64	read-only	DownstreamValidGemFrames counter.
C64 zhoneGponOltStatisticsDownstreamDiscardedFrames	1.3.6.1.4.1.5504.5.14.1.24.1.8	Counter64	read-only	DownstreamDiscardedFrames counter.
C64 zhoneGponOltStatisticsDownstreamGemFrames	1.3.6.1.4.1.5504.5.14.1.24.1.9	Counter64	read-only	DownstreamGemFrames counter.
C64 zhoneGponOltStatisticsDownstreamOmciFrames	1.3.6.1.4.1.5504.5.14.1.24.1.10	Counter64	read-only	DownstreamOmciFrames counter.
C64 zhoneGponOltStatisticsDownstreamPloamFrames	1.3.6.1.4.1.5504.5.14.1.24.1.11	Counter64	read-only	DownstreamPloamFrames counter.
C64 zhoneGponOltStatisticsDownstreamIdlePloamFrames	1.3.6.1.4.1.5504.5.14.1.24.1.12	Counter64	read-only	DownstreamIdlePloamFrames counter.
C64 zhoneGponOltStatisticsDownstreamPonValidEthernetPkts	1.3.6.1.4.1.5504.5.14.1.24.1.13	Counter64	read-only	DownstreamPonValidEthernetPkts counter.
C64 zhoneGponOltStatisticsDownstreamPonCpuPkts	1.3.6.1.4.1.5504.5.14.1.24.1.14	Counter64	read-only	DownstreamPonCpuPkts counter.
C64 zhoneGponOltStatisticsDownstreamTxBytes	1.3.6.1.4.1.5504.5.14.1.24.1.15	Counter64	read-only	DownstreamTxBytes counter.
C64 zhoneGponOltStatisticsUpstreamPonValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.16	Counter64	read-only	Description.
C64 zhoneGponOltStatisticsUpstreamPonValidNotIdlePloams	1.3.6.1.4.1.5504.5.14.1.24.1.17	Counter64	read-only	UpstreamPonValidNotIdlePloams counter.
C64 zhoneGponOltStatisticsUpstreamPonErrorPloams	1.3.6.1.4.1.5504.5.14.1.24.1.18	Counter64	read-only	UpstreamPonErrorPloams counter.
C64 zhoneGponOltStatisticsUpstreamPonInvalidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.19	Counter64	read-only	UpstreamPonInvalidPkts counter.
C64 zhoneGponOltStatisticsUpstreamDroppedPktsInactivePorts	1.3.6.1.4.1.5504.5.14.1.24.1.20	Counter64	read-only	UpstreamDroppedPktsInactivePorts counter.
C64 zhoneGponOltStatisticsUpstreamDroppedPloamsFifoFull	1.3.6.1.4.1.5504.5.14.1.24.1.21	Counter64	read-only	UpstreamDroppedPloamsFifoFull counter.
C64 zhoneGponOltStatisticsDownstreamTmValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.22	Counter64	read-only	DownstreamTmValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmCrcPkts	1.3.6.1.4.1.5504.5.14.1.24.1.23	Counter64	read-only	DownstreamTmCrcPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmDroppedCpuPkts	1.3.6.1.4.1.5504.5.14.1.24.1.24	Counter64	read-only	DownstreamTmDroppedCpuPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmMacLookupMiss	1.3.6.1.4.1.5504.5.14.1.24.1.25	Counter64	read-only	DownstreamTmMacLookupMiss counter.
C64 zhoneGponOltStatisticsDownstreamTmPktsForwardedFromHmToPon	1.3.6.1.4.1.5504.5.14.1.24.1.26	Counter64	read-only	DownstreamTmPktsForwardedFromHmToPon counter.
C64 zhoneGponOltStatisticsDownstreamTmPktsDroppedGemPidNotEnabled	1.3.6.1.4.1.5504.5.14.1.24.1.27	Counter64	read-only	DownstreamTmPktsDroppedGemPidNotEnabled counter.
C64 zhoneGponOltStatisticsDownstreamTmQ0ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.28	Counter64	read-only	DownstreamTmQ0ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ0DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.29	Counter64	read-only	DownstreamTmQ0DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ1ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.30	Counter64	read-only	DownstreamTmQ1ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ1DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.31	Counter64	read-only	DownstreamTmQ1DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ2ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.32	Counter64	read-only	DownstreamTmQ2ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ2DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.33	Counter64	read-only	DownstreamTmQ2DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ3ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.34	Counter64	read-only	DownstreamTmQ3ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ3DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.35	Counter64	read-only	DownstreamTmQ3DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ4ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.36	Counter64	read-only	DownstreamTmQ4ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ4DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.37	Counter64	read-only	DownstreamTmQ4DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ5ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.38	Counter64	read-only	DownstreamTmQ5ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ5DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.39	Counter64	read-only	DownstreamTmQ5DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ6ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.40	Counter64	read-only	DownstreamTmQ6ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ6DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.41	Counter64	read-only	DownstreamTmQ6DroppedPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ7ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.42	Counter64	read-only	DownstreamTmQ7ValidPkts counter.
C64 zhoneGponOltStatisticsDownstreamTmQ7DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.43	Counter64	read-only	DownstreamTmQ7DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmDroppedCpuPkts	1.3.6.1.4.1.5504.5.14.1.24.1.44	Counter64	read-only	UpstreamTmDroppedCpuPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmDroppedPktsCrcError	1.3.6.1.4.1.5504.5.14.1.24.1.45	Counter64	read-only	UpstreamTmDroppedPktsCrcError counter.
C64 zhoneGponOltStatisticsUpstreamTmDroppedPktsSecurity	1.3.6.1.4.1.5504.5.14.1.24.1.46	Counter64	read-only	UpstreamTmDroppedPktsSecurity counter.
C64 zhoneGponOltStatisticsUpstreamTmLearnFailures	1.3.6.1.4.1.5504.5.14.1.24.1.47	Counter64	read-only	UpstreamTmLearnFailures counter.
C64 zhoneGponOltStatisticsUpstreamTmQ0ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.48	Counter64	read-only	UpstreamTmQ0ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ0DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.49	Counter64	read-only	UpstreamTmQ0DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ1ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.50	Counter64	read-only	UpstreamTmQ1ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ1DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.51	Counter64	read-only	UpstreamTmQ1DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ2ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.52	Counter64	read-only	UpstreamTmQ2ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ2DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.53	Counter64	read-only	UpstreamTmQ2DroppedPkts
C64 zhoneGponOltStatisticsUpstreamTmQ3ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.54	Counter64	read-only	UpstreamTmQ3ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ3DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.55	Counter64	read-only	UpstreamTmQ3DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ4ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.56	Counter64	read-only	UpstreamTmQ4ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ4DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.57	Counter64	read-only	UpstreamTmQ4DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ5ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.58	Counter64	read-only	UpstreamTmQ5ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ5DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.59	Counter64	read-only	UpstreamTmQ5DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ6ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.60	Counter64	read-only	UpstreamTmQ6ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ6DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.61	Counter64	read-only	UpstreamTmQ6DroppedPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ7ValidPkts	1.3.6.1.4.1.5504.5.14.1.24.1.62	Counter64	read-only	UpstreamTmQ7ValidPkts counter.
C64 zhoneGponOltStatisticsUpstreamTmQ7DroppedPkts	1.3.6.1.4.1.5504.5.14.1.24.1.63	Counter64	read-only	UpstreamTmQ7DroppedPkts counter.
T/F zhoneGponOltStatisticsClearStats	1.3.6.1.4.1.5504.5.14.1.24.1.64	TruthValue	read-write	Clear all statistics for the selected interface.
zhoneGponUpstreamOntStatisticsTable	1.3.6.1.4.1.5504.5.14.1.25		not-accessible	Per ONT Upstream Statistics provided by Broadlight.
zhoneGponUpstreamOntStatisticsEntry	1.3.6.1.4.1.5504.5.14.1.25.1		not-accessible	Per ONT Upstream Statistics provided by Broadlight.
C64 zhoneGponUpstreamOntStatisticsUpstreamBipErrors	1.3.6.1.4.1.5504.5.14.1.25.1.1	Counter64	read-only	UpstreamOntStatisticsUpstreamBipErrors counter.
C64 zhoneGponUpstreamOntStatisticsFecCorrectedBytes	1.3.6.1.4.1.5504.5.14.1.25.1.2	Counter64	read-only	UpstreamOntStatisticsFecCorrectedBytes counter.
C64 zhoneGponUpstreamOntStatisticsFecCorrectedCodewords	1.3.6.1.4.1.5504.5.14.1.25.1.3	Counter64	read-only	UpstreamOntStatisticsFecCorrectedCodewords counter.
C64 zhoneGponUpstreamOntStatisticsFecUncorrectedCodewords	1.3.6.1.4.1.5504.5.14.1.25.1.4	Counter64	read-only	UpstreamOntStatisticsFecUncorrectedCodewords counter.
C64 zhoneGponUpstreamOntStatisticsTotalRxCodewords	1.3.6.1.4.1.5504.5.14.1.25.1.5	Counter64	read-only	UpstreamOntStatisticsTotalRxCodewords counter.
C64 zhoneGponUpstreamOntStatisticsUnreceivedBursts	1.3.6.1.4.1.5504.5.14.1.25.1.6	Counter64	read-only	UpstreamOntStatisticsUnreceivedBursts counter.
C64 zhoneGponUpstreamOntStatisticsBipErrors	1.3.6.1.4.1.5504.5.14.1.25.1.7	Counter64	read-only	UpstreamOntStatisticsBipErrors counter.
C64 zhoneGponUpstreamOntStatisticsRemoteBipErrors	1.3.6.1.4.1.5504.5.14.1.25.1.8	Counter64	read-only	UpstreamOntStatisticsRemoteBipErrors counter.
C64 zhoneGponUpstreamOntStatisticsDriftOfWindowIndications	1.3.6.1.4.1.5504.5.14.1.25.1.9	Counter64	read-only	UpstreamOntStatisticsDriftOfWindowIndications counter.
C64 zhoneGponUpstreamOntStatisticsMessageErrorMessage	1.3.6.1.4.1.5504.5.14.1.25.1.10	Counter64	read-only	UpstreamOntStatisticsMessageErrorMessage counter.
T/F zhoneGponUpstreamOntStatisticsClearStats	1.3.6.1.4.1.5504.5.14.1.25.1.11	TruthValue	read-write	Clear all statistics for the selected interface.
zhoneGponOltMIB	1.3.6.1.4.1.5504.6.111			This is the Zhone GPON mib which contains SNMP objects for GPON ONU configuration, alarms, and status.It also includes the GPON OLT status information.
zhoneGponOltConfigGroup	1.3.6.1.4.1.5504.9.1.10			GPON OLT Config group
zhoneGponOnuConfigGroup	1.3.6.1.4.1.5504.9.1.11			GPON ONU Config group
zhoneGponPortConfigGroup	1.3.6.1.4.1.5504.9.1.12			GPON Port Config group
zhoneGponAllocIdGroup	1.3.6.1.4.1.5504.9.1.13			GPON Allocation ID group
zhoneGponSerialNoGroup	1.3.6.1.4.1.5504.9.1.14			GPON Serial Number group
zhoneGponOnuStatusGroup	1.3.6.1.4.1.5504.9.1.15			GPON ONU Status group
zhoneOnuOmciMeProfileGroup	1.3.6.1.4.1.5504.9.1.16			GPON OMCI ONU ME Profile group
zhoneOnuOmciGenericProfileGroup	1.3.6.1.4.1.5504.9.1.17			GPON OMCI ONU Generic Profile group
zhoneOnuOmciSpecificProfileGroup	1.3.6.1.4.1.5504.9.1.18			GPON OMCI ONU Specific Profile group
zhoneGponOmciOnuAlarmsGroup	1.3.6.1.4.1.5504.9.1.19			GPON OMCI ONU Alarms group
zhoneGponTrapGroup	1.3.6.1.4.1.5504.9.1.20			Gpon Trap objects.
zhoneGponTrafficProfileGroup	1.3.6.1.4.1.5504.9.1.21			Gpon Traffic Profile objects.
zhoneGponPortStatusGroup	1.3.6.1.4.1.5504.9.1.22			Gpon Port Status objects.
zhoneGponOmciStatusGroup	1.3.6.1.4.1.5504.9.1.24			Gpon Omci Status objects.
zhoneGponOmciOnuRebootGroup	1.3.6.1.4.1.5504.9.1.25			Gpon Omci Reboot objects.
zhoneGponOmciOnuPortAdminGroup	1.3.6.1.4.1.5504.9.1.26			Gpon Port Admin objects.
zhoneGponOmciOnuImageUpgradeGroup	1.3.6.1.4.1.5504.9.1.27			Group of ONU Image Upgrade objects
zhoneGponOltStatusGroup	1.3.6.1.4.1.5504.9.1.28			GPON OLT Status Group.
zhoneGponeOltDbaStatusGroup	1.3.6.1.4.1.5504.9.1.29			GPON OLT Dba Status Group.
zhoneGponCmdGroup	1.3.6.1.4.1.5504.9.1.31			GPON Command objects
zhoneGponOltStatisticsGroup	1.3.6.1.4.1.5504.9.1.32			Gpon OLT Statistics objects.
zhoneGponUpstreamOntStatisticsGroup	1.3.6.1.4.1.5504.9.1.33			Gpon Upstream ONT Statistics objects.
zhoneGponDeprecated	1.3.6.1.4.1.5504.9.1.34			Gpon Deprecated objects.

RFC description

Manages GPON (Gigabit-capable Passive Optical Network) OLT line cards and subscriber interfaces.

Start monitoring Zhone GPON OLT, Zhone GPON ONT/ONU (optical-power/registration/alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Zhone-GPON-MIB

What Is Zhone-GPON-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description