All MIBs › ZYXEL-IESCOMMON-MIB
Category: ZyXEL DSL Access
Description:
Defines common ZyXEL IES DSL access platform objects shared across integrated Ethernet switch series.
Imported Objects
From Q-BRIDGE-MIB
| PortList |
From RFC-1215
| TRAP-TYPE |
From RFC1213-MIB
| DisplayString | |
| PhysAddress | |
| ifIndex |
From SNMPv2-SMI
| IpAddress | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE |
From SNMPv2-TC
| RowStatus |
From ZYXEL-MIB
| iesSeries | |
| iesSeriesCommon |
What Is ZYXEL-IESCOMMON-MIB?
ZYXEL-IESCOMMON-MIB is a ZyXEL enterprise MIB defining objects common to the IES (Integrated Ethernet Switch) family of DSL access platforms, acting as a shared foundational module rather than a feature-specific one. It typically supplies common data types, textual conventions, and OID subtree anchors that other ZyXEL IES-series MIBs build on, rather than exposing runtime data itself. As a foundational module it has limited direct monitoring value on its own, but it underpins hardware/software status monitoring indirectly by providing the shared card/slot/port indexing conventions used by the platform's line-card, alarm, and performance MIBs. It is explicitly depended upon by the broader ZyXEL IES-series DSL access MIB suite. It is deployed in DSLAM/IES chassis-based DSL access multiplexer environments used by carriers and ISPs to aggregate subscriber DSL lines. Engineers can download the ZYXEL-IESCOMMON-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-IESCOMMON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZyXEL IES-series DSL access multiplexer (DSLAM)
Monitoring Examples
No sample objects were provided, and given its role as a common definitions module with no further module description, it likely contains shared textual conventions and OID subtree definitions rather than pollable runtime counters; a realistic monitoring scenario cannot be honestly constructed from this data alone. The IES-series MIBs that import from this common module are the ones an administrator would actually poll for line-card or port status.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF reboot | 1.3.6.1.4.1.890.1.5.13.0.1 | Send a message to the manager that the system is going to reboot. The variable is the reason why the system reboots. | ||
| NTF systemShutdown | 1.3.6.1.4.1.890.1.5.13.0.2 | Send a message to the manager that the system is going to shutdown. The variable is the reason that causes the system to shutdown. | ||
| NTF overheat | 1.3.6.1.4.1.890.1.5.13.0.3 | Send a message to the manager that the system is overheated. The variable in the binding list is the current temperature in Celsius of the system. | ||
| NTF overheatOver | 1.3.6.1.4.1.890.1.5.13.0.4 | Send a message to the manager that the overheated condition is over. The variable in the binding list is the current temperature in Celsius of the system. | ||
| NTF errLog | 1.3.6.1.4.1.890.1.5.13.0.5 | Send a message to the manager that an error log is created in system. The variable in the binding list is the content of the error log. | ||
| NTF fanRpmLow | 1.3.6.1.4.1.890.1.5.13.0.6 | Send a message to the manager that the rpm of the fan is too low. The variable in the binding list is the current rpm of the fan. | ||
| NTF fanRpmNormal | 1.3.6.1.4.1.890.1.5.13.0.7 | Send a message to the manager that the low-rpm condition of the fan is over. The variable in the binding list is the current rpm of the fan. | ||
| NTF voltageOutOfRange | 1.3.6.1.4.1.890.1.5.13.0.8 | Send a message to the manager that the voltage of the system is out of range. The variable in the binding list is the current voltage in volt of the system. | ||
| NTF voltageNormal | 1.3.6.1.4.1.890.1.5.13.0.9 | Send a message to the manager that the low-voltage condition is over. The variable in the binding list is the current voltage in volt of the system. | ||
| NTF systemMaintenanceFailure | 1.3.6.1.4.1.890.1.5.13.0.10 | Send a message to the manager that the system maintence operation fail. The variable in the variable binding indicates the problem. | ||
| NTF configChange | 1.3.6.1.4.1.890.1.5.13.0.11 | This notification indicates that the configuration data of one module is changed. | ||
| NTF moduleUp | 1.3.6.1.4.1.890.1.5.13.0.12 | A moduleUp trap signifies that the sending protocol entity recognizes that one of the modules represented in the agent's configuration has come up. | ||
| NTF moduleDown | 1.3.6.1.4.1.890.1.5.13.0.13 | A moduleDown trap signifies that the sending protocol entity recognizes a failure in one of the modules represented in the agent's configuration. | ||
| NTF modulePlugIn | 1.3.6.1.4.1.890.1.5.13.0.14 | A modulePlugIn trap signifies that the sending protocol entity recognizes that one module is plugged into the device. | ||
| NTF modulePullOut | 1.3.6.1.4.1.890.1.5.13.0.15 | A modulePullOut trap signifies that the sending protocol entity recognizes one module is pulled out from the device. | ||
| NTF powerDC48VAFailure | 1.3.6.1.4.1.890.1.5.13.0.16 | The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) failed. | ||
| NTF powerDC48VANormal | 1.3.6.1.4.1.890.1.5.13.0.17 | The trap signifies that the power supply of DC 48V at the right side of main Chassis (front view) is in normal state. | ||
| NTF powerDC48VBFailure | 1.3.6.1.4.1.890.1.5.13.0.18 | The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) failed. | ||
| NTF powerDC48VBNormal | 1.3.6.1.4.1.890.1.5.13.0.19 | The trap signifies that the power supply of DC 48V at the left side of main Chassis (front view) is in normal state. | ||
| NTF extAlarmInputTrigger | 1.3.6.1.4.1.890.1.5.13.0.20 | The trap signifies that the external alarm input of MSC card is triggered. | ||
| NTF extAlarmInputRelease | 1.3.6.1.4.1.890.1.5.13.0.21 | The trap signifies that the external alarm input of MSC card is released. | ||
| NTF thermalSensorFailure | 1.3.6.1.4.1.890.1.5.13.0.22 | The trap signifies that the thermal sensor failed. | ||
| NTF mscSwitchOverOK | 1.3.6.1.4.1.890.1.5.13.0.23 | The trap signifies that MSC card is switched over successfully. The value of iesSlotId is the slot ID of the current working MSC. | ||
| NTF networkTopologyChange | 1.3.6.1.4.1.890.1.5.13.0.24 | The trap signifies the network topology is changed. | ||
| NTF adslAtucLof | 1.3.6.1.4.1.890.1.5.13.0.25 | The trap signifies ATU-C Loss of Framing. | ||
| NTF adslAturLof | 1.3.6.1.4.1.890.1.5.13.0.26 | The trap signifies ATU-R Loss of Framing. | ||
| NTF adslAtucLos | 1.3.6.1.4.1.890.1.5.13.0.27 | The trap signifies ATU-C Loss of Signal. | ||
| NTF adslAturLos | 1.3.6.1.4.1.890.1.5.13.0.28 | The trap signifies ATU-R Loss of Signal. | ||
| NTF adslAturLpr | 1.3.6.1.4.1.890.1.5.13.0.29 | The trap signifies ATU-R Loss of Power. | ||
| NTF adslAtucLofClear | 1.3.6.1.4.1.890.1.5.13.0.30 | The trap signifies ATU-C Loss of Framing is cleared. | ||
| NTF adslAturLofClear | 1.3.6.1.4.1.890.1.5.13.0.31 | The trap signifies ATU-R Loss of Framing is cleared. | ||
| NTF adslAtucLosClear | 1.3.6.1.4.1.890.1.5.13.0.32 | The trap signifies ATU-C Loss of Signal is cleared. | ||
| NTF adslAturLosClear | 1.3.6.1.4.1.890.1.5.13.0.33 | The trap signifies ATU-R Loss of Signal is cleared. | ||
| NTF adslAturLprClear | 1.3.6.1.4.1.890.1.5.13.0.34 | The trap signifies ATU-R Loss of Power is cleared. | ||
| iesChassis | 1.3.6.1.4.1.890.1.5.13.1.1 | |||
| INT iesNumOfChassis | 1.3.6.1.4.1.890.1.5.13.1.1.1 | INTEGER | read-only | The number of chassis in the IES-2000/3000 system |
| iesChassisTable | 1.3.6.1.4.1.890.1.5.13.1.1.2 | not-accessible | The table which contains the chassis information in IES-2000/3000 system | |
| iesChassisEntry | 1.3.6.1.4.1.890.1.5.13.1.1.2.1 | not-accessible | ||
| INT iesChassisId | 1.3.6.1.4.1.890.1.5.13.1.1.2.1.1 | INTEGER | read-only | The Chassis ID |
| INT iesChassisFrameNumber | 1.3.6.1.4.1.890.1.5.13.1.1.2.1.2 | INTEGER | read-write | The Frame ID |
| STR iesChassisSerialNumber | 1.3.6.1.4.1.890.1.5.13.1.1.2.1.3 | DisplayString | read-only | The Chassis Serial Number |
| INT iesChassisNumber | 1.3.6.1.4.1.890.1.5.13.1.1.2.1.4 | INTEGER | read-write | The Chassis Number which is defined by the system administrator for management purpose |
| INT iesChassisStatus | 1.3.6.1.4.1.890.1.5.13.1.1.2.1.5 | INTEGER | read-only | The current status of the chassis. |
| iesSlotTable | 1.3.6.1.4.1.890.1.5.13.1.1.3 | not-accessible | The table which contains the slot information in a chassis of IES-2000/3000 system | |
| iesSlotEntry | 1.3.6.1.4.1.890.1.5.13.1.1.3.1 | not-accessible | ||
| INT iesSlotId | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.1 | INTEGER | read-only | Identity of the slot |
| INT iesSlotModuleType | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.2 | INTEGER | read-only | Card type of the plug-in card in IES-2000/3000. |
| STR iesSlotModuleDescr | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.3 | DisplayString | read-only | The descriptions of the plug-in card in IES-2000/3000. |
| STR iesSlotModuleFWVersion | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.4 | DisplayString | read-only | The firmware version of the plug-in card in IES-2000/3000. |
| STR iesSlotModuleDriverVersion | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.5 | DisplayString | read-only | The DSL driver of the plug-in card in IES-2000/3000. |
| STR iesSlotModuleModemCodeVersion | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.6 | DisplayString | read-only | The DSL modem code version of the plug-in card in IES-2000/3000 |
| INT iesSlotModuleStatus | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.7 | INTEGER | read-only | The module state of the plug-in card in IES-2000/3000 |
| INT iesSlotModuleAlarmStatus | 1.3.6.1.4.1.890.1.5.13.1.1.3.1.8 | INTEGER | read-only | This variable indicates the alarm status of the module. It is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The moduleNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 moduleNoDefect 2 moduleOverHeat 3 moduleFanRpmLow 4 moduleVoltageLow 5 moduleThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange |
| iesMscPortConfTable | 1.3.6.1.4.1.890.1.5.13.1.1.4 | not-accessible | The table contains port configuration information in MSC1000. | |
| iesMscPortConfEntry | 1.3.6.1.4.1.890.1.5.13.1.1.4.1 | not-accessible | ||
| INT iesMscPortId | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.1 | INTEGER | read-only | Identity of the extension slot in MSC1000. |
| INT iesMscPortType | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.2 | INTEGER | read-only | Port type of the extension slot in MSC1000. |
| INT iesMscPortIfIndex | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.3 | INTEGER | read-only | |
| INT iesMscPortSpeed | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.4 | INTEGER | read-write | |
| INT iesMscPortDuplex | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.5 | INTEGER | read-write | |
| INT iesMscPortFlowControl | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.6 | INTEGER | read-write | |
| INT iesMscPortDefaultVLANTagging | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.7 | INTEGER | read-write | |
| INT iesMscPortTrunkGroupId | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.8 | INTEGER | read-only | |
| INT iesMscPortMode | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.9 | INTEGER | read-write | The operational mode for uplink and subtending ports in MSC. Only the operational mode of subtending ports can be modified. |
| INT iesMscPortVLANTrunking | 1.3.6.1.4.1.890.1.5.13.1.1.4.1.10 | INTEGER | read-write | The VLAN trunking setting for uplink and subtending ports in MSC. |
| iesHWMonitor | 1.3.6.1.4.1.890.1.5.13.1.2 | |||
| iesFanRpmTable | 1.3.6.1.4.1.890.1.5.13.1.2.1 | not-accessible | A table that contains rpm information about the fans. | |
| iesFanRpmEntry | 1.3.6.1.4.1.890.1.5.13.1.2.1.1 | not-accessible | A list of rpm information for each fan. | |
| INT iesFanRpmIndex | 1.3.6.1.4.1.890.1.5.13.1.2.1.1.1 | INTEGER | read-only | The identity of the fan. |
| INT iesFanRpmCurValue | 1.3.6.1.4.1.890.1.5.13.1.2.1.1.2 | INTEGER | read-only | The current rpm of the fan. |
| INT iesFanRpmMaxValue | 1.3.6.1.4.1.890.1.5.13.1.2.1.1.3 | INTEGER | read-only | The maximum rpm ever performed by the fan. |
| INT iesFanRpmMinValue | 1.3.6.1.4.1.890.1.5.13.1.2.1.1.4 | INTEGER | read-only | The minimum rpm ever performed by the fan. |
| INT iesFanRpmLowThresh | 1.3.6.1.4.1.890.1.5.13.1.2.1.1.5 | INTEGER | read-only | The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap. |
| STR iesFanRpmDescr | 1.3.6.1.4.1.890.1.5.13.1.2.1.1.6 | DisplayString | read-only | The description of the fan (e.g. location, function, etc.). |
| iesVoltageTable | 1.3.6.1.4.1.890.1.5.13.1.2.2 | not-accessible | A table that contains voltage information about the system. | |
| iesVoltageEntry | 1.3.6.1.4.1.890.1.5.13.1.2.2.1 | not-accessible | A list of voltage information for each sensor. | |
| INT iesVoltageIndex | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.1 | INTEGER | read-only | The identity of the sensor. |
| INT iesVoltageCurValue | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.2 | INTEGER | read-only | The current voltage detected by the sensor (in milli-voltage). |
| INT iesVoltageMaxValue | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.3 | INTEGER | read-only | The maximum voltage ever detected by the sensor (in milli-voltage). |
| INT iesVoltageMinValue | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.4 | INTEGER | read-only | The minimum voltage ever detected by the sensor (in milli-voltage). |
| INT iesVoltageNominalValue | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.5 | INTEGER | read-only | The nominal voltage which the power should supply (in milli-voltage). |
| INT iesVoltageLowThresh | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.6 | INTEGER | read-only | The low threshold of the voltage (in milli-voltage). If the current voltage is less than the threshold, the device will initiate the voltageLow trap. |
| STR iesVoltageDescr | 1.3.6.1.4.1.890.1.5.13.1.2.2.1.7 | DisplayString | read-only | The description of the voltage (e.g. location, nominal value, etc.). |
| iesSysTempTable | 1.3.6.1.4.1.890.1.5.13.1.2.3 | not-accessible | A table that contains temperature information about system. | |
| iesSysTempEntry | 1.3.6.1.4.1.890.1.5.13.1.2.3.1 | not-accessible | A list of temperature information for each sensor. | |
| INT iesSysTempIndex | 1.3.6.1.4.1.890.1.5.13.1.2.3.1.1 | INTEGER | read-only | The identity of the sensor. |
| INT iesSysTempCurValue | 1.3.6.1.4.1.890.1.5.13.1.2.3.1.2 | INTEGER | read-only | The current temperature detected in Celsius by the sensor. |
| INT iesSysTempMaxValue | 1.3.6.1.4.1.890.1.5.13.1.2.3.1.3 | INTEGER | read-only | The maximum temperature ever detected in Celsius by the sensor. |
| INT iesSysTempMinValue | 1.3.6.1.4.1.890.1.5.13.1.2.3.1.4 | INTEGER | read-only | The minimum temperature ever detected in Celsius by the sensor. |
| INT iesSysTempHighThresh | 1.3.6.1.4.1.890.1.5.13.1.2.3.1.5 | INTEGER | read-only | The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap. |
| STR iesSysTempDescr | 1.3.6.1.4.1.890.1.5.13.1.2.3.1.6 | DisplayString | read-only | The description of the temperature sensor (e.g. location, function, etc.). |
| iesSysMgnt | 1.3.6.1.4.1.890.1.5.13.1.3 | |||
| iesSysState | 1.3.6.1.4.1.890.1.5.13.1.3.1 | |||
| INT iesSystemCurrentStatus | 1.3.6.1.4.1.890.1.5.13.1.3.1.1 | INTEGER | read-only | This variable indicates the status of the system. The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sysNoDefect 2 sysOverHeat 3 sysFanRpmLow 4 sysVoltageLow 5 sysThermalSensorFailure 6 modulePullOut 7 powerDC48VAFailure 8 powerDC48VBFailure 9 extAlarmInputTrigger 10 moduleDown 11 mscSwitchOverOK 12 networkTopologyChange |
| STR iesProblemCause | 1.3.6.1.4.1.890.1.5.13.1.3.1.2 | DisplayString | read-only | It describes the problem occurred in the system, e.g. maintenance operation failures, system reboot, error log, ...etc. |
| iesSysMaintenance | 1.3.6.1.4.1.890.1.5.13.1.3.2 | |||
| INT iesMaintenanceOps | 1.3.6.1.4.1.890.1.5.13.1.3.2.1 | INTEGER | read-write | The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: config save BIT 2: reset BIT 3: local loopback test BIT 4: remote loopback test BIT 5: clear system alarms BIT 6: F4 loopback test BIT 7: F5 loopback test BIT 8: DSL Line Diagnostic |
| INT iesMaintenanceTarget | 1.3.6.1.4.1.890.1.5.13.1.3.2.2 | INTEGER | read-write | The managed object is used for identify the target on which the maintenance operation should be performed. The target can be a chassis, a plug-in module, and a port. The value of the object will be: (Chassis_id * 10000 + slot_id * 100 + port_id) where chassis_id: 0~3, slot_id: 1~16, port_id: 1~24 |
| INT iesMaintenanceDSLConfOps | 1.3.6.1.4.1.890.1.5.13.1.3.2.3 | INTEGER | read-write | The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT 3: set DSL mode BIT 4: set profile BIT 5: enable mac filter BIT 6: disable mac filter BIT 7: set packet filter BIT 8: enable dot1x BIT 9: disable dot1x BIT 10: set dot1x control BIT 11: enable dot1x re-authentication BIT 12: disable dot1x re-authentication BIT 13: set dot1x re-authentication period BIT 14: enable mac count filter BIT 15: disable mac count filter BIT 16: set mac count filter BIT 17: set alarm profile BIT 18: set Annex L BIT 19: set power management BIT 20: set rate adaptation mode BIT 21: set IGMP filter |
| OCT iesMaintenanceDSLConfTarget | 1.3.6.1.4.1.890.1.5.13.1.3.2.4 | OCTET STRING | read-write | The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1: the octet specifies a set of eight Chassis, Chassis 0 through 7 Byte 2~3: each octet specifies a set of eight slots, with the first octet specifying slots 1 through 8 and the second octet specifying slots 9 through 16. Byte 4: reserved Byte 5~11: each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, etc. |
| STR iesMaintenanceDSLConfProfileName | 1.3.6.1.4.1.890.1.5.13.1.3.2.5 | DisplayString | read-write | The DSL profile name |
| INT iesMaintenanceDSLConfMode | 1.3.6.1.4.1.890.1.5.13.1.3.2.6 | INTEGER | read-write | The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto Bit 5: ADSL, ETSI Bit 6: ADSL2, Bit 7: ADSL2+ |
| INT iesMaintenanceDSLConfPktFilter | 1.3.6.1.4.1.890.1.5.13.1.3.2.7 | INTEGER | read-write | The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP |
| INT iesMaintenanceDSLConfDot1xControl | 1.3.6.1.4.1.890.1.5.13.1.3.2.8 | INTEGER | read-write | The configuration defines the 802.1x control type. |
| INT iesMaintenanceDSLConfDot1xReauthPeriod | 1.3.6.1.4.1.890.1.5.13.1.3.2.9 | INTEGER | read-write | The configuration defines the 802.1x re-authentication period (seconds). |
| INT iesMaintenanceDSLConfMacCount | 1.3.6.1.4.1.890.1.5.13.1.3.2.10 | INTEGER | read-write | The configuration defines the number of mac addresses which can pass through the port. |
| INT iesMaintenanceVpi | 1.3.6.1.4.1.890.1.5.13.1.3.2.11 | INTEGER | read-write | VPI of the channel |
| INT iesMaintenanceVci | 1.3.6.1.4.1.890.1.5.13.1.3.2.12 | INTEGER | read-write | VCI of the channel |
| OCT iesMaintenanceDSLConfAlarmProfileName | 1.3.6.1.4.1.890.1.5.13.1.3.2.13 | OCTET STRING | read-write | The DSL alarm profile name |
| INT iesMaintenanceDSLConfAnnexL | 1.3.6.1.4.1.890.1.5.13.1.3.2.14 | INTEGER | read-write | The annex L setting of the ADSL line. |
| INT iesMaintenanceDSLConfPmMode | 1.3.6.1.4.1.890.1.5.13.1.3.2.15 | INTEGER | read-write | The power management mode of the ADSL line. |
| INT iesMaintenanceDSLConfRateMode | 1.3.6.1.4.1.890.1.5.13.1.3.2.16 | INTEGER | read-write | Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. |
| OCT iesMaintenanceDSLConfIgmpFilter | 1.3.6.1.4.1.890.1.5.13.1.3.2.17 | OCTET STRING | read-write | The IGMP filter name. |
| iesSysTimeSetup | 1.3.6.1.4.1.890.1.5.13.1.3.3 | |||
| INT iesTimeServerMode | 1.3.6.1.4.1.890.1.5.13.1.3.3.1 | INTEGER | read-write | The mechanism of Time Server when the system boots up. |
| IP iesTimeServerIP | 1.3.6.1.4.1.890.1.5.13.1.3.3.2 | IpAddress | read-write | The IP Address of Time Server |
| STR iesSystemTime | 1.3.6.1.4.1.890.1.5.13.1.3.3.3 | DisplayString | read-write | The system time |
| STR iesSystemDate | 1.3.6.1.4.1.890.1.5.13.1.3.3.4 | DisplayString | read-write | The system date |
| INT iesSystemTimeZone | 1.3.6.1.4.1.890.1.5.13.1.3.3.5 | INTEGER | read-write | The system time zone |
| iesSysAccessControl | 1.3.6.1.4.1.890.1.5.13.1.3.4 | |||
| iesAccessCtrlTable | 1.3.6.1.4.1.890.1.5.13.1.3.4.1 | not-accessible | A table that contains information about service access control. | |
| iesAccessCtrlEntry | 1.3.6.1.4.1.890.1.5.13.1.3.4.1.1 | not-accessible | A list of access control entry. | |
| INT iesAccessCtrlService | 1.3.6.1.4.1.890.1.5.13.1.3.4.1.1.1 | INTEGER | read-only | The service type of the access control entry. |
| INT iesAccessCtrlEnable | 1.3.6.1.4.1.890.1.5.13.1.3.4.1.1.2 | INTEGER | read-write | Enable or disable the service. |
| INT iesAccessCtrlPort | 1.3.6.1.4.1.890.1.5.13.1.3.4.1.1.3 | INTEGER | read-write | The port number which the service uses. |
| INT iesMaxNumOfSecuredClients | 1.3.6.1.4.1.890.1.5.13.1.3.4.2 | INTEGER | read-only | The maximum number of sets of secured clients. |
| iesSecuredClientTable | 1.3.6.1.4.1.890.1.5.13.1.3.4.3 | not-accessible | A table that contains information about secured clients. | |
| iesSecuredClientEntry | 1.3.6.1.4.1.890.1.5.13.1.3.4.3.1 | not-accessible | A list of secured client entry. | |
| IP iesSecuredClientStartIp | 1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.1 | IpAddress | read-only | The starting IP address of a set of secured clients. |
| IP iesSecuredClientEndIp | 1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.2 | IpAddress | read-only | The ending IP address of a set of secured clients. |
| INT iesSecuredClientService | 1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.3 | INTEGER | read-create | Each bit corresponds to a service. The bit is set to 1 if the service is enabled, and set to 0 if the service is disabled. The various bit positions are: BIT 1: telnet BIT 2: FTP BIT 3: web BIT 4: ICMP |
| ROW iesSecuredClientRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.4.3.1.4 | RowStatus | read-create | This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'. |
| iesSysStaticRoute | 1.3.6.1.4.1.890.1.5.13.1.3.5 | |||
| INT iesMaxNumOfStaticRoutes | 1.3.6.1.4.1.890.1.5.13.1.3.5.1 | INTEGER | read-only | The maximum number of static routes. |
| iesStaticRouteTable | 1.3.6.1.4.1.890.1.5.13.1.3.5.2 | not-accessible | A table that contains information about static routes. | |
| iesStaticRouteEntry | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1 | not-accessible | A list of static route entry. | |
| STR iesStaticRouteName | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.1 | DisplayString | read-only | The name of the static route. |
| IP iesStaticRouteDest | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.2 | IpAddress | read-create | The destination IP address of the static route. |
| IP iesStaticRouteMask | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.3 | IpAddress | read-create | The subnet mask of the static route. |
| IP iesStaticRouteGateway | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.4 | IpAddress | read-create | The gateway IP address of the static route. |
| INT iesStaticRouteMetric | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.5 | INTEGER | read-create | The routing metric of the static route. |
| ROW iesStaticRouteRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.5.2.1.6 | RowStatus | read-create | This object is used to create a new row or modify or delete an existing row in this table. A row is activated by setting this object to `active', and is deactivated by setting it to 'notInService'. |
| iesSyslogSetup | 1.3.6.1.4.1.890.1.5.13.1.3.6 | |||
| INT iesSysLogEnable | 1.3.6.1.4.1.890.1.5.13.1.3.6.1 | INTEGER | read-write | Enable/disable syslog function. |
| IP iesSysLogServer | 1.3.6.1.4.1.890.1.5.13.1.3.6.2 | IpAddress | read-write | IP address of the syslog server. |
| INT iesSysLogFacility | 1.3.6.1.4.1.890.1.5.13.1.3.6.3 | INTEGER | read-write | Log facility used by the syslog function. |
| iesSysDhcpSetup | 1.3.6.1.4.1.890.1.5.13.1.3.7 | |||
| INT iesDhcpRelayEnable | 1.3.6.1.4.1.890.1.5.13.1.3.7.1 | INTEGER | read-write | Enable/disable DHCP relay function. |
| INT iesDhcpRelayOption82Enable | 1.3.6.1.4.1.890.1.5.13.1.3.7.2 | INTEGER | read-write | Enable/disable DHCP relay Option82 function. |
| STR iesDhcpRelayOption82Info | 1.3.6.1.4.1.890.1.5.13.1.3.7.3 | DisplayString | read-write | User specific Option82 information. |
| INT iesMaxNumOfDhcpServers | 1.3.6.1.4.1.890.1.5.13.1.3.7.4 | INTEGER | read-only | The maximum number of DHCP servers. |
| iesDhcpServerTable | 1.3.6.1.4.1.890.1.5.13.1.3.7.5 | not-accessible | A table that contains DHCP server information. | |
| iesDhcpServerEntry | 1.3.6.1.4.1.890.1.5.13.1.3.7.5.1 | not-accessible | The entry of DHCP server table. | |
| IP iesDhcpServerIp | 1.3.6.1.4.1.890.1.5.13.1.3.7.5.1.1 | IpAddress | read-only | The IP address of the DHCP server. |
| ROW iesDhcpServerRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.7.5.1.2 | RowStatus | read-create | The row status of the DHCP server entry. |
| iesSysSNMPSetup | 1.3.6.1.4.1.890.1.5.13.1.3.8 | |||
| INT iesMaxNumberOfTrapDestinations | 1.3.6.1.4.1.890.1.5.13.1.3.8.1 | INTEGER | read-only | The max number of the trap destinations. |
| iesSNMPTrapDestTable | 1.3.6.1.4.1.890.1.5.13.1.3.8.2 | not-accessible | A table that contains SNMP trap destination information. | |
| iesSNMPTrapDestEntry | 1.3.6.1.4.1.890.1.5.13.1.3.8.2.1 | not-accessible | The entry of SNMP trap destination table. | |
| IP iesTrapDestIp | 1.3.6.1.4.1.890.1.5.13.1.3.8.2.1.1 | IpAddress | read-only | The IP address of the trap destination. |
| INT iesTrapDestPort | 1.3.6.1.4.1.890.1.5.13.1.3.8.2.1.2 | INTEGER | read-only | The UDP port of the trap destination. |
| ROW iesTrapDestRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.8.2.1.3 | RowStatus | read-create | The row status of the trap destination entry. |
| STR iesSnmpGetCommunity | 1.3.6.1.4.1.890.1.5.13.1.3.8.3 | DisplayString | read-write | The SNMP get community. |
| STR iesSnmpSetCommunity | 1.3.6.1.4.1.890.1.5.13.1.3.8.4 | DisplayString | read-write | The SNMP set community. |
| STR iesSnmpTrapCommunity | 1.3.6.1.4.1.890.1.5.13.1.3.8.5 | DisplayString | read-write | The SNMP trap community. |
| iesSysDot1xSetup | 1.3.6.1.4.1.890.1.5.13.1.3.9 | |||
| INT iesMaxNumberOfRadiusServers | 1.3.6.1.4.1.890.1.5.13.1.3.9.1 | INTEGER | read-only | The max number of the RADIUS Servers. |
| iesRadiusServerTable | 1.3.6.1.4.1.890.1.5.13.1.3.9.2 | not-accessible | A table that contains Radius Server information. | |
| iesRadiusServerEntry | 1.3.6.1.4.1.890.1.5.13.1.3.9.2.1 | not-accessible | The entry of Radius Server table. | |
| INT iesRadiusServerIndex | 1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.1 | INTEGER | read-only | The identity of the RADIUS server. |
| IP iesRadiusServerIp | 1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.2 | IpAddress | read-create | The IP address of the Radius Server. |
| INT iesRadiusServerPort | 1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.3 | INTEGER | read-create | The UDP port of the Radius Server. |
| STR iesRadiusSharedSecret | 1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.4 | DisplayString | read-create | The shared secret of the Radius Server. |
| ROW iesRadiusServerRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.9.2.1.5 | RowStatus | read-create | The row status of the Radius Server entry. |
| INT iesDot1xEnable | 1.3.6.1.4.1.890.1.5.13.1.3.9.3 | INTEGER | read-write | Enable/disable the 802.1x function. |
| iesDot1xPortTable | 1.3.6.1.4.1.890.1.5.13.1.3.9.4 | not-accessible | This table includes the configuration of 802.1x. | |
| iesDot1xPortEntry | 1.3.6.1.4.1.890.1.5.13.1.3.9.4.1 | not-accessible | An entry in iesDot1xPortTable. | |
| INT iesDot1xPortEnable | 1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.1 | INTEGER | read-write | The option defines if the port enables 802.1x settings. |
| INT iesDot1xPortControl | 1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.2 | INTEGER | read-write | The configuration defines the 802.1x port control type. |
| INT iesDot1xPortReAuthEnable | 1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.3 | INTEGER | read-write | The option defines if the port enables 802.1x re-authentication. |
| INT iesDot1xPortReAuthPeriod | 1.3.6.1.4.1.890.1.5.13.1.3.9.4.1.4 | INTEGER | read-write | The configuration defines the 802.1x re-authentication period (seconds) for each port. |
| iesSysMacFilter | 1.3.6.1.4.1.890.1.5.13.1.3.10 | |||
| iesMacFilterStatusTable | 1.3.6.1.4.1.890.1.5.13.1.3.10.1 | not-accessible | This table includes the status of mac filtering for each port. | |
| iesMacFilterStatusEntry | 1.3.6.1.4.1.890.1.5.13.1.3.10.1.1 | not-accessible | An entry in iesMacFilterStatusTable. | |
| INT iesMacFilterStatusEnable | 1.3.6.1.4.1.890.1.5.13.1.3.10.1.1.1 | INTEGER | read-write | The option defines if the port enables mac filtering. |
| INT iesMaxNumberOfMacFilters | 1.3.6.1.4.1.890.1.5.13.1.3.10.2 | INTEGER | read-only | The max number of the mac filters in the system. |
| INT iesMaxNumberOfMacFiltersPerPort | 1.3.6.1.4.1.890.1.5.13.1.3.10.3 | INTEGER | read-only | The max number of the mac filters for each port. |
| INT iesCurrNumberOfMacFilters | 1.3.6.1.4.1.890.1.5.13.1.3.10.4 | INTEGER | read-only | The current number of the mac filters in the system. |
| iesMacFilterTable | 1.3.6.1.4.1.890.1.5.13.1.3.10.5 | not-accessible | A table that contains the mac filtering information. | |
| iesMacFilterEntry | 1.3.6.1.4.1.890.1.5.13.1.3.10.5.1 | not-accessible | The entry of iesMacFilterTable. | |
| PHY iesMacFilterMacAddr | 1.3.6.1.4.1.890.1.5.13.1.3.10.5.1.1 | PhysAddress | read-only | The mac address which can pass through the port. |
| ROW iesMacFilterRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.10.5.1.2 | RowStatus | read-create | The row status of the entry. |
| iesSysPacketFilter | 1.3.6.1.4.1.890.1.5.13.1.3.11 | |||
| iesPacketFilterTable | 1.3.6.1.4.1.890.1.5.13.1.3.11.1 | not-accessible | This table includes packet filtering for each port. | |
| iesPacketFilterEntry | 1.3.6.1.4.1.890.1.5.13.1.3.11.1.1 | not-accessible | An entry in iesPacketFilterTable. | |
| INT iesPacketFilter | 1.3.6.1.4.1.890.1.5.13.1.3.11.1.1.1 | INTEGER | read-write | The packet filter. The semantic for each bit is: Bit 1: accept all Bit 2: accept PPPoE only Bit 3: reject ARP Bit 4: reject DHCP Bit 5: reject EAPOL Bit 6: reject PPPoE Bit 7: reject NetBIOS Bit 8: reject IGMP Bit 9: reject IP |
| iesSysMacCountFilter | 1.3.6.1.4.1.890.1.5.13.1.3.12 | |||
| iesMacCountFilterTable | 1.3.6.1.4.1.890.1.5.13.1.3.12.1 | not-accessible | This table includes mac count filtering for each port. | |
| iesMacCountFilterEntry | 1.3.6.1.4.1.890.1.5.13.1.3.12.1.1 | not-accessible | An entry in iesMacCountFilterTable. | |
| INT iesMacCountFilterStatus | 1.3.6.1.4.1.890.1.5.13.1.3.12.1.1.1 | INTEGER | read-write | The option defines if the port enables mac count filtering. |
| INT iesMacCountFilterCount | 1.3.6.1.4.1.890.1.5.13.1.3.12.1.1.2 | INTEGER | read-write | The number of mac addresses which can pass through the port. |
| iesSysMulticastGroup | 1.3.6.1.4.1.890.1.5.13.1.3.13 | |||
| INT iesMaxNumberOfMulticastGroups | 1.3.6.1.4.1.890.1.5.13.1.3.13.1 | INTEGER | read-only | The max number of static multicast groups in the system. |
| iesMulticastGroupTable | 1.3.6.1.4.1.890.1.5.13.1.3.13.2 | not-accessible | A table that contains static multicast group information. | |
| iesMulticastGroupEntry | 1.3.6.1.4.1.890.1.5.13.1.3.13.2.1 | not-accessible | The entry of multicast group table. | |
| PHY iesMulticastGroupMacAddr | 1.3.6.1.4.1.890.1.5.13.1.3.13.2.1.1 | PhysAddress | read-only | The multicast MAC address of the group. |
| POR iesMulticastGroupPorts | 1.3.6.1.4.1.890.1.5.13.1.3.13.2.1.2 | PortList | read-create | The port list which specifies the ports joining the multicast group. |
| ROW iesMulticastGroupRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.13.2.1.3 | RowStatus | read-create | The row status of the multicast group entry. |
| iesSysIgmpFilter | 1.3.6.1.4.1.890.1.5.13.1.3.14 | |||
| INT iesMaxNumberOfIgmpFilters | 1.3.6.1.4.1.890.1.5.13.1.3.14.1 | INTEGER | read-only | The max number of IGMP filters in the system. |
| iesIgmpFilterTable | 1.3.6.1.4.1.890.1.5.13.1.3.14.2 | not-accessible | A table that contains IGMP filters. | |
| iesIgmpFilterEntry | 1.3.6.1.4.1.890.1.5.13.1.3.14.2.1 | not-accessible | The entry of IGMP filter table. | |
| OCT iesIgmpFilterName | 1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.1 | OCTET STRING | read-only | The IGMP filter name. |
| INT iesIgmpFilterIndex | 1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.2 | INTEGER | read-only | The index which specifies the filter rule. |
| IP iesIgmpFilterStartIp | 1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.3 | IpAddress | read-create | The start IP of the filter rule. |
| IP iesIgmpFilterEndIp | 1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.4 | IpAddress | read-create | The end IP of the filter rule. |
| ROW iesIgmpFilterRowStatus | 1.3.6.1.4.1.890.1.5.13.1.3.14.2.1.5 | RowStatus | read-create | The row status of the IGMP filter entry. |
| iesIgmpFilterPortTable | 1.3.6.1.4.1.890.1.5.13.1.3.14.3 | not-accessible | This table specifies the IGMP filter of the port. | |
| iesIgmpFilterPortEntry | 1.3.6.1.4.1.890.1.5.13.1.3.14.3.1 | not-accessible | An entry in iesIgmpFilterPortTable. | |
| OCT iesIgmpFilterPortFilter | 1.3.6.1.4.1.890.1.5.13.1.3.14.3.1.1 | OCTET STRING | read-write | The IGMP filter of the port. |
| iesL2SW | 1.3.6.1.4.1.890.1.5.13.1.4 | |||
| INT iesIGMPSnoopingEnabled | 1.3.6.1.4.1.890.1.5.13.1.4.1 | INTEGER | read-write | A flag indicating whether IGMP snooping function is enabled or not. |
| INT iesManagementVLANId | 1.3.6.1.4.1.890.1.5.13.1.4.2 | INTEGER | read-write | The VLAN ID for management. |
| INT iesMaxNumOfStaticVlans | 1.3.6.1.4.1.890.1.5.13.1.4.3 | INTEGER | read-write | The maximum number of static VLANs supported by the system. |
| INT iesMaxNumOfTrunkGroups | 1.3.6.1.4.1.890.1.5.13.1.4.4 | INTEGER | read-only | The maximum number of trunk groups. |
| iesTrunkGroupTable | 1.3.6.1.4.1.890.1.5.13.1.4.5 | not-accessible | A table that contains trunk group configuration. | |
| iesTrunkGroupEntry | 1.3.6.1.4.1.890.1.5.13.1.4.5.1 | not-accessible | The entry of trunk group table | |
| INT iesTrunkGroupId | 1.3.6.1.4.1.890.1.5.13.1.4.5.1.1 | INTEGER | read-only | The ID of the trunk group |
| STR iesTrunkGroupName | 1.3.6.1.4.1.890.1.5.13.1.4.5.1.2 | DisplayString | read-create | The name of the trunk group |
| POR iesTrunkGroupPorts | 1.3.6.1.4.1.890.1.5.13.1.4.5.1.3 | PortList | read-create | The port list of the trunk group |
| ROW iesTrunkGroupRowStatus | 1.3.6.1.4.1.890.1.5.13.1.4.5.1.4 | RowStatus | read-create | The row status of the trunk group entry |
| INT iesPortIsolationEnable | 1.3.6.1.4.1.890.1.5.13.1.4.6 | INTEGER | read-write | A flag indicating whether VLAN port isolation function is enabled or not. |
| INT iesRSTPEnable | 1.3.6.1.4.1.890.1.5.13.1.4.7 | INTEGER | read-write | Enable/Disable RSTP. |
| INT iesSwitchMode | 1.3.6.1.4.1.890.1.5.13.1.4.8 | INTEGER | read-write | Switch DSLAM's operatrion Mode. |
RFC description
Manages IES-series device configuration including DSL, DHCP, VLAN, STP, and module management across chassis platforms.
Start monitoring ZyXEL IES-series DSL access multiplexer (DSLAM) (shared card/slot/port indexing support, no independent runtime data) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.