All MIBs › ZYXEL-MIB
Category: Textual Conventions and Registries
Description:
Root MIB module for ZyXEL Communications, defining the top-level OID hierarchy and product categories for ZyXEL network devices including routers, switches, and DSLAMs.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| NetworkAddress | |
| enterprises |
What Is ZYXEL-MIB?
ZYXEL-MIB, often just called the zyxel mib, is ZyXEL Communications' root enterprise MIB module, establishing the top-level OID hierarchy and product-category structure under which ZyXEL's actual device and feature MIB modules are registered. It does not itself expose operational data; it defines the organizational tree distinguishing product families such as routers, switches, and DSLAM equipment within ZyXEL's private enterprise number. Because it carries no runtime objects, it is not directly used to check hardware or software status, but every ZyXEL device MIB that does report interface, environmental, or system health data is registered beneath this module's hierarchy. It depends only on the base SNMP private-enterprise numbering scheme and is imported implicitly by ZyXEL's product-specific MIBs. It is deployed wherever ZyXEL routers, switches, or DSLAM equipment are managed via SNMP.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZyXEL routers, switches, and DSLAM equipment
Monitoring Examples
This module defines only the top-level OID tree and product-category structure, with no runtime data objects or tables, so there is no monitoring scenario to describe; it exists to organize and anchor ZyXEL's other, device-specific MIB modules.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxel | 1.3.6.1.4.1.890 | |||
| NTF reboot | 1.3.6.1.4.1.890.0.1 | Send a message to the manager that the system is going to reboot. The variable is the reason of rebooting. | ||
| products | 1.3.6.1.4.1.890.1 | |||
| prestige | 1.3.6.1.4.1.890.1.2 | |||
| pSysVariables | 1.3.6.1.4.1.890.1.2.1 | |||
| STR pSysRasSWVersion | 1.3.6.1.4.1.890.1.2.1.1 | DisplayString | read-only | The current RAS software version. |
| STR pSysIsdnFWVersion | 1.3.6.1.4.1.890.1.2.1.2 | DisplayString | read-only | The current ISDN firmware version. |
| INT pSysRouteIP | 1.3.6.1.4.1.890.1.2.1.3 | INTEGER | read-only | Determines if TCP/IP is enabled. |
| INT pSysRouteIPX | 1.3.6.1.4.1.890.1.2.1.4 | INTEGER | read-only | Determines if IPX is enabled. |
| INT pSysRouteAPT | 1.3.6.1.4.1.890.1.2.1.5 | INTEGER | read-only | Determines if AppleTalk is enabled. |
| INT pSysBridge | 1.3.6.1.4.1.890.1.2.1.6 | INTEGER | read-only | Determines if Bridging is enabled. |
| pBRIVariables | 1.3.6.1.4.1.890.1.2.2 | |||
| INT pBRISwitchType | 1.3.6.1.4.1.890.1.2.2.1 | INTEGER | read-only | Identifies the ISDN switch type. |
| INT pBChannelUsage | 1.3.6.1.4.1.890.1.2.2.2 | INTEGER | read-only | Idenitifes how the B channels are used. |
| STR p1stPhoneNumber | 1.3.6.1.4.1.890.1.2.2.3 | DisplayString | read-only | First telephone number. |
| STR p1stSpidNumber | 1.3.6.1.4.1.890.1.2.2.4 | DisplayString | read-only | First SPID number. |
| INT p1stAnalogCall | 1.3.6.1.4.1.890.1.2.2.5 | INTEGER | read-only | How the 1st channel will handle an analog call. |
| STR p2ndPhoneNumber | 1.3.6.1.4.1.890.1.2.2.6 | DisplayString | read-only | Second telephone number. |
| STR p2ndSpidNumber | 1.3.6.1.4.1.890.1.2.2.7 | DisplayString | read-only | Second SPID number. |
| INT p2ndAnalogCall | 1.3.6.1.4.1.890.1.2.2.8 | INTEGER | read-only | How the 2nd channel will handle an analog call. |
| pIPXVariables | 1.3.6.1.4.1.890.1.2.3 | |||
| INT pFrameType8022 | 1.3.6.1.4.1.890.1.2.3.1 | INTEGER | read-only | Frame type 802.2 is enabled. |
| INT pSeedRouter8022 | 1.3.6.1.4.1.890.1.2.3.2 | INTEGER | read-only | Defines if this is a seed router. |
| STR pNetworkNumber8022 | 1.3.6.1.4.1.890.1.2.3.3 | DisplayString | read-only | Defines the network address for this frame type. |
| INT pFrameType8023 | 1.3.6.1.4.1.890.1.2.3.4 | INTEGER | read-only | Frame type 802.3 is enabled. |
| INT pSeedRouter8023 | 1.3.6.1.4.1.890.1.2.3.5 | INTEGER | read-only | Defines if this is a seed router. |
| STR pNetworkNumber8023 | 1.3.6.1.4.1.890.1.2.3.6 | DisplayString | read-only | Defines the network address for this frame type. |
| INT pFrameTypeEthernetII | 1.3.6.1.4.1.890.1.2.3.7 | INTEGER | read-only | Frame type Ethernet II is enabled. |
| INT pSeedRouterEthernetII | 1.3.6.1.4.1.890.1.2.3.8 | INTEGER | read-only | Defines if this is a seed router. |
| STR pNetworkNumberEthernetII | 1.3.6.1.4.1.890.1.2.3.9 | DisplayString | read-only | Defines the network address for this frame type. |
| INT pFrameTypeSnap | 1.3.6.1.4.1.890.1.2.3.10 | INTEGER | read-only | Frame type SNAP is enabled. |
| INT pSeedRouterSnap | 1.3.6.1.4.1.890.1.2.3.11 | INTEGER | read-only | Defines if this is a seed router. |
| STR pNetworkNumberSnap | 1.3.6.1.4.1.890.1.2.3.12 | DisplayString | read-only | Defines the network address for this frame type. |
| pIPXRouteTable | 1.3.6.1.4.1.890.1.2.3.13 | not-accessible | Each row of the table provides the information for an IPX static route. | |
| pipxRouteEntry | 1.3.6.1.4.1.890.1.2.3.13.1 | not-accessible | The object type of the rows in pIPXRouteTable. | |
| INT pIpxRtIndex | 1.3.6.1.4.1.890.1.2.3.13.1.1 | INTEGER | read-only | The index of the route entry. |
| STR pIpxRtServerName | 1.3.6.1.4.1.890.1.2.3.13.1.2 | DisplayString | read-only | The name of the IPX route. |
| INT pIpxRtActive | 1.3.6.1.4.1.890.1.2.3.13.1.3 | INTEGER | read-only | Determines if the route is active or not. |
| STR pIpxRtNetworkNumber | 1.3.6.1.4.1.890.1.2.3.13.1.4 | DisplayString | read-only | The network number for this IPX route. |
| STR pIpxRtNodeNumber | 1.3.6.1.4.1.890.1.2.3.13.1.5 | DisplayString | read-only | The node number for this IPX route. |
| STR pIpxRtSocketNumber | 1.3.6.1.4.1.890.1.2.3.13.1.6 | DisplayString | read-only | The socket number for this IPX route. |
| STR pIpxRtTypeNumber | 1.3.6.1.4.1.890.1.2.3.13.1.7 | DisplayString | read-only | The type number for this IPX route. |
| INT pIpxRtHopCount | 1.3.6.1.4.1.890.1.2.3.13.1.8 | INTEGER | read-only | The hop count for this IPX route. |
| INT pIpxRtTickCount | 1.3.6.1.4.1.890.1.2.3.13.1.9 | INTEGER | read-only | The tick count for this IPX route. |
| INT pIpxRtGatewayNode | 1.3.6.1.4.1.890.1.2.3.13.1.10 | INTEGER | read-only | The remote node number that serves as the gateway for this IPX route. |
| pAPTVariables | 1.3.6.1.4.1.890.1.2.4 | |||
| INT pAPTSeedRouter | 1.3.6.1.4.1.890.1.2.4.1 | INTEGER | read-only | Determines if this is a seed router. |
| INT pAPTNetworkMin | 1.3.6.1.4.1.890.1.2.4.2 | INTEGER | read-only | The network minimum number for the range. |
| INT pAPTNetworkMax | 1.3.6.1.4.1.890.1.2.4.3 | INTEGER | read-only | The network maximum number for the range. |
| STR pAPT1stZoneName | 1.3.6.1.4.1.890.1.2.4.4 | DisplayString | read-only | 1st AppleTalk zone name. |
| STR pAPT2ndZoneName | 1.3.6.1.4.1.890.1.2.4.5 | DisplayString | read-only | 2nd AppleTalk zone name. |
| INT pAPTZipTimeout | 1.3.6.1.4.1.890.1.2.4.6 | INTEGER | read-only | Zip Timeout. |
| pAPTRouteTable | 1.3.6.1.4.1.890.1.2.4.7 | not-accessible | Each row of this table provides the information for an AppleTalk static route. | |
| paptRouteEntry | 1.3.6.1.4.1.890.1.2.4.7.1 | not-accessible | The object type of the rows in pAPTRouteTable. | |
| INT pAptRtIndex | 1.3.6.1.4.1.890.1.2.4.7.1.1 | INTEGER | read-only | The row index for the static route. |
| STR pAptRt1stZoneName | 1.3.6.1.4.1.890.1.2.4.7.1.2 | DisplayString | read-only | 1st zone name for this static route. |
| STR pAptRt2ndZoneName | 1.3.6.1.4.1.890.1.2.4.7.1.3 | DisplayString | read-only | 2nd zone name for this static route. |
| INT pAptRtNetworkMin | 1.3.6.1.4.1.890.1.2.4.7.1.4 | INTEGER | read-only | Network min number for this static route. |
| INT pAptRtNetworkMax | 1.3.6.1.4.1.890.1.2.4.7.1.5 | INTEGER | read-only | Network max number for this static route. |
| INT pAptRtActive | 1.3.6.1.4.1.890.1.2.4.7.1.6 | INTEGER | read-only | Determines if this static route is active. |
| INT pAptRtMetric | 1.3.6.1.4.1.890.1.2.4.7.1.7 | INTEGER | read-only | Metric for this static route. |
| INT pAptRtGatewayNode | 1.3.6.1.4.1.890.1.2.4.7.1.8 | INTEGER | read-only | Gateway remote node for this static route. |
| pBRGVariables | 1.3.6.1.4.1.890.1.2.5 | |||
| INT pBRGHandleIpx | 1.3.6.1.4.1.890.1.2.5.1 | INTEGER | read-only | Determines how prestige should handle IPX. |
| pBRGRouteTable | 1.3.6.1.4.1.890.1.2.5.2 | not-accessible | Each row of this table provides the information for a Bridge static route. | |
| pbrgRouteEntry | 1.3.6.1.4.1.890.1.2.5.2.1 | not-accessible | The object type of the rows in pBRGRouteTable. | |
| INT pBrgRtIndex | 1.3.6.1.4.1.890.1.2.5.2.1.1 | INTEGER | read-only | The row index for the static route. |
| STR pBrgRtRouteName | 1.3.6.1.4.1.890.1.2.5.2.1.2 | DisplayString | read-only | Route name for this static route. |
| INT pBrgRtActive | 1.3.6.1.4.1.890.1.2.5.2.1.3 | INTEGER | read-only | Determines if this static route is active. |
| STR pBrgRtEtherAddress | 1.3.6.1.4.1.890.1.2.5.2.1.4 | DisplayString | read-only | The ethernet address for this static route. |
| IP pBrgRtIpAddress | 1.3.6.1.4.1.890.1.2.5.2.1.5 | IpAddress | read-only | The ip dress for this static route. |
| INT pBrgRtGatewayNode | 1.3.6.1.4.1.890.1.2.5.2.1.6 | INTEGER | read-only | Gateway remote node for this static route. |
| pDialInVariables | 1.3.6.1.4.1.890.1.2.6 | |||
| INT pDIClidAuthen | 1.3.6.1.4.1.890.1.2.6.1 | INTEGER | read-only | CLID authentication status for incoming calls. |
| INT pDIRecvAuthen | 1.3.6.1.4.1.890.1.2.6.2 | INTEGER | read-only | Determines the type of authentication for incoming calls. |
| INT pDILinkCompression | 1.3.6.1.4.1.890.1.2.6.3 | INTEGER | read-only | Determines the type of compression algorithm used. |
| INT pDIMaxTransferRate | 1.3.6.1.4.1.890.1.2.6.4 | INTEGER | read-only | Maximum transfer rate allowed. |
| INT pDIIdleTimeout | 1.3.6.1.4.1.890.1.2.6.5 | INTEGER | read-only | The default idle timeout value. |
| INT pDIIpAddressSupply | 1.3.6.1.4.1.890.1.2.6.6 | INTEGER | read-only | How the IP address is supplied. |
| IP pDIIpPoolStartAddress | 1.3.6.1.4.1.890.1.2.6.7 | IpAddress | read-only | The IP pool start address. |
| INT pDIIpPoolCount | 1.3.6.1.4.1.890.1.2.6.8 | INTEGER | read-only | Number of IP pool address to use. |
| INT pDIIpxPool | 1.3.6.1.4.1.890.1.2.6.9 | INTEGER | read-only | Use IPX pool to assign IPX network number. |
| STR pDIIpxPoolStartNetNumber | 1.3.6.1.4.1.890.1.2.6.10 | DisplayString | read-only | Starting IPX net number in the pool. |
| INT pDIIpxPoolCount | 1.3.6.1.4.1.890.1.2.6.11 | INTEGER | read-only | IPX pool count number. |
| pRemoteNodeVariables | 1.3.6.1.4.1.890.1.2.7 | |||
| pRemoteNodeTable | 1.3.6.1.4.1.890.1.2.7.1 | not-accessible | Each row of this table provides the information for one remote node. | |
| premoteNodeEntry | 1.3.6.1.4.1.890.1.2.7.1.1 | not-accessible | The object type of the rows in pRemoteNodeTable. | |
| INT pRNIndex | 1.3.6.1.4.1.890.1.2.7.1.1.1 | INTEGER | read-only | Row number for this node in the remote node table. |
| STR pRNName | 1.3.6.1.4.1.890.1.2.7.1.1.2 | DisplayString | read-only | Descriptive name to identify the remote node. |
| INT pRNActive | 1.3.6.1.4.1.890.1.2.7.1.1.3 | INTEGER | read-only | To set the remote node active or inactive. |
| INT pRNCallDirection | 1.3.6.1.4.1.890.1.2.7.1.1.4 | INTEGER | read-only | Call direction for the remote node. |
| STR pRNRemLogin | 1.3.6.1.4.1.890.1.2.7.1.1.5 | DisplayString | read-only | Remote node login name. |
| STR pRNRemClid | 1.3.6.1.4.1.890.1.2.7.1.1.6 | DisplayString | read-only | Remote node CLID number. |
| INT pRNCallBack | 1.3.6.1.4.1.890.1.2.7.1.1.7 | INTEGER | read-only | Remote node callback enabled or not. |
| STR pRNMyLogin | 1.3.6.1.4.1.890.1.2.7.1.1.8 | DisplayString | read-only | Your login name for a call to a remote node. |
| STR pRN1stPhoneNumber | 1.3.6.1.4.1.890.1.2.7.1.1.9 | DisplayString | read-only | Primary phone number for the remote node. |
| STR pRN2ndPhoneNumber | 1.3.6.1.4.1.890.1.2.7.1.1.10 | DisplayString | read-only | Secondary phone number for the remote node. |
| INT pRNRouteType | 1.3.6.1.4.1.890.1.2.7.1.1.11 | INTEGER | read-only | Route capabilities for this remote node. |
| INT pRNBridgeEnabled | 1.3.6.1.4.1.890.1.2.7.1.1.12 | INTEGER | read-only | Bridging enabled or disabled. |
| INT pRNEncapsulation | 1.3.6.1.4.1.890.1.2.7.1.1.13 | INTEGER | read-only | Encapsualtion for the packets. |
| IP pRNIpAddress | 1.3.6.1.4.1.890.1.2.7.1.1.14 | IpAddress | read-only | LAN IP address of remote node. |
| INT pRNTransferRate | 1.3.6.1.4.1.890.1.2.7.1.1.15 | INTEGER | read-only | Transfer rate for the call to this remote node. |
| INT pRNIdleTimeout | 1.3.6.1.4.1.890.1.2.7.1.1.16 | INTEGER | read-only | Idle timeout for this remote node. |
| pRemoteUserVariables | 1.3.6.1.4.1.890.1.2.8 | |||
| pRemoteUserTable | 1.3.6.1.4.1.890.1.2.8.1 | not-accessible | Each row of this table provides a remote user entry. | |
| premoteUserEntry | 1.3.6.1.4.1.890.1.2.8.1.1 | not-accessible | The object type of the rows in pRemoteUserTable. | |
| INT pRUIndex | 1.3.6.1.4.1.890.1.2.8.1.1.1 | INTEGER | read-only | The row number of this remote user. |
| STR pRUName | 1.3.6.1.4.1.890.1.2.8.1.1.2 | DisplayString | read-only | The name of this remote user. |
| INT pRUActive | 1.3.6.1.4.1.890.1.2.8.1.1.3 | INTEGER | read-only | Determines if remote user is active or inactive |
| INT pRUCallBack | 1.3.6.1.4.1.890.1.2.8.1.1.4 | INTEGER | read-only | Determines if callback is enabled for this remote user. |
| STR pRUCallBackNumber | 1.3.6.1.4.1.890.1.2.8.1.1.5 | DisplayString | read-only | The callback phone number of this remote user. |
| INT pRUCallBackOverride | 1.3.6.1.4.1.890.1.2.8.1.1.6 | INTEGER | read-only | Determines if the callback override is enabled for this remote user. |
| STR pRUClid | 1.3.6.1.4.1.890.1.2.8.1.1.7 | DisplayString | read-only | The CLID number for this remote user. |
| INT pRUIdleTimeout | 1.3.6.1.4.1.890.1.2.8.1.1.8 | INTEGER | read-only | The idle timeout for this remote user. |
| zyxelTraps | 1.3.6.1.4.1.890.1.2.9 | |||
| STR whyReboot | 1.3.6.1.4.1.890.1.2.9.1 | DisplayString | read-only | Send a message to the manager that the system is going to reboot. The variable is the reason of rebooting. |
RFC description
ZyXEL Communications vendor-private MIB (enterprise OID 890) root registration module for device management objects covering system, BRI, IPX, bridging, and dial-in variables.
Start monitoring ZyXEL routers, switches, and DSLAM equipment, enterprise OID registration root (no runtime data) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.