All MIBs › ZXR10-ETH-MGT-MIB › zxr10EthSubIfConfigRowStatus
zxr10EthSubIfConfigRowStatus
Module: ZXR10-ETH-MGT-MIB
OID (symbolic): ZXR10-ETH-MGT-MIB::zxr10EthSubIfConfigRowStatus
OID (numeric): 1.3.6.1.4.1.3902.3.103.2.1.2.1.1.7
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: This object is used to manage creation and deletion of rows in this table.
zxr10SecondaryIpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
What is zxr10EthSubIfConfigRowStatus?
Creates or deletes this sub-interface configuration row -- set to createAndGo to add a new sub-interface, destroy to remove it. Other columns can still be modified while the row is active, but destroying an entry that provides the device's only network reachability should be paired with creating its replacement in the same SNMP request to avoid a lockout.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.103.2.1.2.1.1.7 snmpwalk -v2c -c public <target> ZXR10-ETH-MGT-MIB::zxr10EthSubIfConfigRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.103.2.1.2.1.1.7.1 snmpget -v2c -c public <target> ZXR10-ETH-MGT-MIB::zxr10EthSubIfConfigRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.103.2.1.2.1.1.7.1 s <value>
Start monitoring ZTE Corporation ZXR10 router platforms (sub-interface VLAN encapsulation/physical-port speed-MTU config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-ETH-MGT-MIB::zxr10EthSubIfConfigRowStatus OID value, configure state conditions and alerts, and monitor any ZTE Corporation ZXR10 router platforms (sub-interface VLAN encapsulation/physical-port speed-MTU config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.103 | zxr10interfaces | ZXR10-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.103.2 | zxr10EthMgtMIB | ZXR10-ETH-MGT-MIB |
| 1.3.6.1.4.1.3902.3.103.2.1 | zxr10EthMgtMIBObjects | ZXR10-ETH-MGT-MIB |
| 1.3.6.1.4.1.3902.3.103.2.1.2 | zxr10EthConfiguration | ZXR10-ETH-MGT-MIB |
| 1.3.6.1.4.1.3902.3.103.2.1.2.1 | zxr10EthSubIfConfigTable | ZXR10-ETH-MGT-MIB |
| 1.3.6.1.4.1.3902.3.103.2.1.2.1.1 | zxr10EthSubIfConfigEntry | ZXR10-ETH-MGT-MIB |
| 1.3.6.1.4.1.3902.3.103.2.1.2.1.1.7 | zxr10EthSubIfConfigRowStatus | ZXR10-ETH-MGT-MIB |