ZXR10-ES-GROUP-MGMT-MIB

All MIBs › ZXR10-ES-GROUP-MGMT-MIB

Category: ZTE ZXR10 Routing and Switching

Description: Manages ZTE ZXR10 router Ethernet segment group configuration for EVPN multihoming.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-ES-GROUP-MGMT-MIB?

ZXR10-ES-GROUP-MGMT-MIB is a ZTE-specific enterprise MIB for the ZXR10 router/switch product line, focused on managing Ethernet Segment (ES) groups used in EVPN multihoming deployments. It would typically expose configuration objects for defining ES groups, associating them with physical or logical interfaces, and reporting the multihoming redundancy state used to prevent loops and duplicate traffic in EVPN fabrics. Because no object names were available for this module, specifics on hardware health monitoring cannot be confirmed, but ES-group MIBs of this kind generally focus on configuration/operational status rather than environmental sensors like temperature or power. It logically depends on the EVPN/BGP MPLS-based multihoming standards (RFC 7432 and related work) that define the Ethernet Segment concept it manages. This MIB would be used in data-center or service-provider deployments running ZTE ZXR10 routers configured for EVPN multihomed Ethernet access. Engineers can download the ZXR10-ES-GROUP-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-ES-GROUP-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 routers/switches (EVPN multihoming deployments)

Monitoring Examples

No sample objects were provided for this module, so a concrete polling example cannot be constructed with confidence; typically an ES-group MIB of this kind would expose a table of configured Ethernet Segments with per-segment identifiers and multihoming role/status, but the exact object names cannot be verified here.

Imported Objects

From SNMPv2-SMI

Integer32
IpAddress
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
zte	1.3.6.1.4.1.3902
ethernetSwitch	1.3.6.1.4.1.3902.15
groupManagement	1.3.6.1.4.1.3902.15.4
groupParam	1.3.6.1.4.1.3902.15.4.1
I32 gmHandtime	1.3.6.1.4.1.3902.15.4.1.1	Integer32	read-write	Handshake packet interval. Only command switch support this item.
I32 gmHoldtime	1.3.6.1.4.1.3902.15.4.1.2	Integer32	read-write	Group member hold time. Only command switch support this item.
OCT gmName	1.3.6.1.4.1.3902.15.4.1.3	OCTET STRING	read-write	Group name. Only command switch support this item.
INT gmSwitchRole	1.3.6.1.4.1.3902.15.4.1.4	INTEGER	read-write	Switch role.
OCT gmIpPool	1.3.6.1.4.1.3902.15.4.1.5	OCTET STRING	read-write	The format of this item is xx/xx. The first segment represents vlan id, the second segment represents ippool name.
IP tftpServerIpAddr	1.3.6.1.4.1.3902.15.4.1.6	IpAddress	read-write	TFTP server IP address. Only command switch support this item.
MAC belongedCmdMac	1.3.6.1.4.1.3902.15.4.1.7	MacAddress	read-only	Command switch MAC address of the group.
neighborDiscovery	1.3.6.1.4.1.3902.15.4.2
INT dpAdminStatus	1.3.6.1.4.1.3902.15.4.2.1	INTEGER	read-write	Global neighbor discovery protocol status.
I32 dpTimer	1.3.6.1.4.1.3902.15.4.2.2	Integer32	read-write	Neighbor discovery protocol send packets interval.
I32 dpHoldtime	1.3.6.1.4.1.3902.15.4.2.3	Integer32	read-write	Neighbor discovery protocol hold time.
dpPortTable	1.3.6.1.4.1.3902.15.4.2.4		not-accessible	Port neighbor discovery protocol table.
dpPortEntry	1.3.6.1.4.1.3902.15.4.2.4.1		not-accessible	Port neighbor discovery protocol configuration.
I32 dpPortId	1.3.6.1.4.1.3902.15.4.2.4.1.1	Integer32	not-accessible	Port index.
INT dpPortAdminStatus	1.3.6.1.4.1.3902.15.4.2.4.1.2	INTEGER	read-write	Port neighbor discovery protocol status.
dpTrunkTable	1.3.6.1.4.1.3902.15.4.2.5		not-accessible	Smartgroup port neighbor discovery protocol table.
dpTrunkEntry	1.3.6.1.4.1.3902.15.4.2.5.1		not-accessible	Smartgroup port neighbor discovery protocol configuration.
I32 dpTrunkId	1.3.6.1.4.1.3902.15.4.2.5.1.1	Integer32	not-accessible	Smartgroup port index.
INT dpTrunkAdminStatus	1.3.6.1.4.1.3902.15.4.2.5.1.2	INTEGER	read-write	Smartgroup port neighbor discovery protocol status.
topologyCollect	1.3.6.1.4.1.3902.15.4.3
INT tpAdminStatus	1.3.6.1.4.1.3902.15.4.3.1	INTEGER	read-write	Global topology collect protocol status.
I32 tpVlan	1.3.6.1.4.1.3902.15.4.3.2	Integer32	read-write	Vlan id.
I32 tpHop	1.3.6.1.4.1.3902.15.4.3.3	Integer32	read-write	Topology collect protocol hop.
I32 tpTimer	1.3.6.1.4.1.3902.15.4.3.4	Integer32	read-write	Topology collect protocol time interval.
I32 tpHopDelay	1.3.6.1.4.1.3902.15.4.3.5	Integer32	read-write	Delay time for device forwarding packets.
I32 tpPortDelay	1.3.6.1.4.1.3902.15.4.3.6	Integer32	read-write	Delay time for port forwarding packets.
INT tpStart	1.3.6.1.4.1.3902.15.4.3.7	INTEGER	read-write	The value get from this item is insignificant. Setting this item will start a topology collection process.
tpPortTable	1.3.6.1.4.1.3902.15.4.3.8		not-accessible	Port topology collect protocol table.
tpPortEntry	1.3.6.1.4.1.3902.15.4.3.8.1		not-accessible	Port topology collect protocol configuration.
I32 tpPortId	1.3.6.1.4.1.3902.15.4.3.8.1.1	Integer32	not-accessible	Port index.
INT tpPortAdminStatus	1.3.6.1.4.1.3902.15.4.3.8.1.2	INTEGER	read-write	Port topology collect protocol status.
tpTrunkTable	1.3.6.1.4.1.3902.15.4.3.9		not-accessible	Smartgroup port topology collect protocol table.
tpTrunkEntry	1.3.6.1.4.1.3902.15.4.3.9.1		not-accessible	Smartgroup port topology collect protocol configuration.
I32 tpTrunkId	1.3.6.1.4.1.3902.15.4.3.9.1.1	Integer32	not-accessible	Smartgroup port index.
INT tpTrunkAdminStatus	1.3.6.1.4.1.3902.15.4.3.9.1.2	INTEGER	read-write	Smartgroup port topology collect protocol status.
tpDeviceTable	1.3.6.1.4.1.3902.15.4.3.10		not-accessible	Device topology collect protocol table.
tpDeviceEntry	1.3.6.1.4.1.3902.15.4.3.10.1		not-accessible	Device topology collect protocol configuration.
MAC deviceMac	1.3.6.1.4.1.3902.15.4.3.10.1.1	MacAddress	read-only	Device MAC address.
I32 deviceId	1.3.6.1.4.1.3902.15.4.3.10.1.2	Integer32	read-only	Device id.
IP deviceIpAddr	1.3.6.1.4.1.3902.15.4.3.10.1.3	IpAddress	read-only	Device vlan IP address.
I32 deviceHop	1.3.6.1.4.1.3902.15.4.3.10.1.4	Integer32	read-only	Device hop.
OCT devicePlatform	1.3.6.1.4.1.3902.15.4.3.10.1.5	OCTET STRING	read-only	Device description.
INT deviceRole	1.3.6.1.4.1.3902.15.4.3.10.1.6	INTEGER	read-write	Device switch role.
OCT devicePeerPort	1.3.6.1.4.1.3902.15.4.3.10.1.7	OCTET STRING	read-only	The format of this item is xx-xx. The first segment represents local port name, the second segment represents peer port name.
MAC deviceBelongedMac	1.3.6.1.4.1.3902.15.4.3.10.1.8	MacAddress	read-only	If the device switch role is not memberSwitch, this value is the device system MAC address, otherwise this value is the command switch MAC address of the group.
IP deviceBelongedIpAddr	1.3.6.1.4.1.3902.15.4.3.10.1.9	IpAddress	read-only	If the device switch role is commandSwitch or memberSwitch, this value is the command switch IP address of the group, otherwise this value is 0.
memberManage	1.3.6.1.4.1.3902.15.4.4
memberTable	1.3.6.1.4.1.3902.15.4.4.1		not-accessible	Group member table. Only command switch support this item.
memberEntry	1.3.6.1.4.1.3902.15.4.4.1.1		not-accessible	Group member configuration. Only command switch support this item.
MAC memMac	1.3.6.1.4.1.3902.15.4.4.1.1.1	MacAddress	read-only	Group member MAC address.
I32 memId	1.3.6.1.4.1.3902.15.4.4.1.1.2	Integer32	read-only	Group member id.
IP memIpAddr	1.3.6.1.4.1.3902.15.4.4.1.1.3	IpAddress	read-only	Group member IP address.
IP memMask	1.3.6.1.4.1.3902.15.4.4.1.1.4	IpAddress	read-only	Group member mask.
INT memStatus	1.3.6.1.4.1.3902.15.4.4.1.1.5	INTEGER	read-only	Group member status.
INT memRole	1.3.6.1.4.1.3902.15.4.4.1.1.6	INTEGER	read-write	Group member switch role.
U32 snmpPortMap	1.3.6.1.4.1.3902.15.4.4.1.1.7	Unsigned32	read-only	SNMP port map.
I32 httpPortMap	1.3.6.1.4.1.3902.15.4.4.1.1.8	Integer32	read-only	HTTP port map.
I32 ftpPortMap	1.3.6.1.4.1.3902.15.4.4.1.1.9	Integer32	read-only	FTP port map.
I32 tftpPortMap	1.3.6.1.4.1.3902.15.4.4.1.1.10	Integer32	read-only	TFTP port map.
I32 telnetPortMap	1.3.6.1.4.1.3902.15.4.4.1.1.11	Integer32	read-only	TELNET port map.
I32 sshPortMap	1.3.6.1.4.1.3902.15.4.4.1.1.12	Integer32	read-only	SSH port map.
gmEnterpriseTrap	1.3.6.1.4.1.3902.15.4.5
NTF gmTopologyChange	1.3.6.1.4.1.3902.15.4.5.1			This trap sended by command switch to notify topology change.
NTF gmMemberUpDown	1.3.6.1.4.1.3902.15.4.5.2			The trap indicates nms that member switch transfer between connect or disconnect with command switch.

RFC description

ZTE vendor-private MIB for managing ZXR10 edge switch group configuration and failover operations.

Start monitoring ZTE ZXR10 routers/switches, EVPN multihoming deployments (Ethernet-Segment-group config/redundancy status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-ES-GROUP-MGMT-MIB

What Is ZXR10-ES-GROUP-MGMT-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description