All MIBs › ZXR10-ACL-MIB › zxr10LinkACLProtocol
zxr10LinkACLProtocol
Module: ZXR10-ACL-MIB
OID (symbolic): ZXR10-ACL-MIB::zxr10LinkACLProtocol
OID (numeric): 1.3.6.1.4.1.3902.3.1100.1.3.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: <0-65535> Link protocal
What is zxr10LinkACLProtocol?
Link-layer protocol/EtherType value (0-65535) this rule matches, letting an admin filter frames by their Ethernet protocol type rather than an IP protocol number.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.1100.1.3.1.4 snmpwalk -v2c -c public <target> ZXR10-ACL-MIB::zxr10LinkACLProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.1100.1.3.1.4.1 snmpget -v2c -c public <target> ZXR10-ACL-MIB::zxr10LinkACLProtocol.1
Start monitoring ZTE ZXR10 router/switch (IPv4/IPv6 ACL rule/match-criteria config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-ACL-MIB::zxr10LinkACLProtocol OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (IPv4/IPv6 ACL rule/match-criteria config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.1100 | zxr10AclMIB | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1 | zxr10ACL | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1.3 | zxr10LinkACLTable | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1.3.1 | zxr10LinkACLEntry | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.4 | zxr10LinkACLProtocol | ZXR10-ACL-MIB |