All MIBs › ZXR10-ACL-MIB › zxr10IPv4ACLSrcAddr
zxr10IPv4ACLSrcAddr
Module: ZXR10-ACL-MIB
OID (symbolic): ZXR10-ACL-MIB::zxr10IPv4ACLSrcAddr
OID (numeric): 1.3.6.1.4.1.3902.3.1100.1.1.1.4
Node type: OBJECT-TYPE
Type: IpAddress
Access: read-only
Description: A.B.C.D Source address
What is zxr10IPv4ACLSrcAddr?
Source IPv4 address this rule matches against, used together with zxr10IPv4ACLSrcWildcard to define a source address range for filtering traffic, e.g. matching all hosts in a subnet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.1100.1.1.1.4 snmpwalk -v2c -c public <target> ZXR10-ACL-MIB::zxr10IPv4ACLSrcAddr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.1100.1.1.1.4.1 snmpget -v2c -c public <target> ZXR10-ACL-MIB::zxr10IPv4ACLSrcAddr.1
Start monitoring ZTE ZXR10 router/switch (IPv4/IPv6 ACL rule/match-criteria config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-ACL-MIB::zxr10IPv4ACLSrcAddr OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 router/switch (IPv4/IPv6 ACL rule/match-criteria config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.1100 | zxr10AclMIB | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1 | zxr10ACL | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1.1 | zxr10IPv4ACLTable | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1.1.1 | zxr10IPv4ACLEntry | ZXR10-ACL-MIB |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.4 | zxr10IPv4ACLSrcAddr | ZXR10-ACL-MIB |