ZHNWIRELESS

All MIBs › ZHNWIRELESS

Organization: Zhone Technologies, Inc.

Last Updated: 2012-07-11

Category: Wireless LAN Management

Description: Manages Zhone Technologies wireless LAN configuration, SSID settings, security, and client association.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHNWIRELESS?

ZHNWIRELESS is a Zhone Technologies proprietary MIB configuring Wi-Fi radio parameters on Zhone ZNID residential gateway CPE devices. Its base-configuration table, keyed by radio index, records enable state, band, configured/current channel, bandwidth, auto-scan timer, MIMO settings (Nwc encoding, N-rate, N-protection), N-clients-only mode, 54g rate, multicast/basic rate, fragmentation/RTS thresholds, DTIM interval, beacon interval, global max-client count, XPress mode, transmit power percentage, and WMM enable/no-ack settings. As a configuration MIB it lets an administrator confirm a residential gateway's Wi-Fi channel and power settings, useful when troubleshooting subscriber Wi-Fi complaints. It is deployed on Zhone Technologies ZNID residential gateway CPE devices. Engineers can download the ZHNWIRELESS file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHNWIRELESS. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone Technologies ZNID residential gateway CPE devices

Monitoring Examples

An administrator checks wlBaseCfgCurrentChannel and wlBaseCfgTxPowerPercent on a subscriber's Zhone ZNID gateway to diagnose a reported weak Wi-Fi signal complaint.

What Can Be Monitored

Wi-Fi radio channel, bandwidth, and transmit power configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

From Zhone

zhoneWtn

OBJECT-IDENTITY

From Zhone-TC

ZhoneRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
T/F wlAuthStationAssociationStatus	1.3.6.1.4.1.5504.2.5.46.1.7.1.3	TruthValue	read-only	True if the station has been associated.
T/F wlAuthStationAuthorizationStatus	1.3.6.1.4.1.5504.2.5.46.1.7.1.4	TruthValue	read-only	True if the station has been authorized.
U32 wlAuthStationIndex	1.3.6.1.4.1.5504.2.5.46.1.7.1.1	Unsigned32	not-accessible	The index into the Authentication Stations table.
OCT wlAuthStationInterface	1.3.6.1.4.1.5504.2.5.46.1.7.1.6	OCTET STRING	read-only	Interface through which the station has authenticated.
MAC wlAuthStationMACAddr	1.3.6.1.4.1.5504.2.5.46.1.7.1.2	MacAddress	read-only	The MAC address of the authenticated station.
wlAuthStationsEntry	1.3.6.1.4.1.5504.2.5.46.1.7.1		not-accessible	Table of authenicated wireless stations and their status information.
OCT wlAuthStationSSID	1.3.6.1.4.1.5504.2.5.46.1.7.1.5	OCTET STRING	read-only	SSID with which the station has authenticated.
wlAuthStationsTable	1.3.6.1.4.1.5504.2.5.46.1.7		not-accessible	Table of authenicated wireless stations and their status information.
WL5 wlBaseCfg54gRate	1.3.6.1.4.1.5504.2.5.46.1.1.1.12	Wl54gMulticastRates	read-write	The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use54g(2). Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12)
U32 wlBaseCfgAutoScanTimer	1.3.6.1.4.1.5504.2.5.46.1.1.1.7	Unsigned32	read-write	When configured for auto mode, this timer value specifies how often to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices.
OCT wlBaseCfgBand	1.3.6.1.4.1.5504.2.5.46.1.1.1.3	OCTET STRING	read-only	Broadcast band (e.g. 2.4GHz operation).
OCT wlBaseCfgBandwidth	1.3.6.1.4.1.5504.2.5.46.1.1.1.6	OCTET STRING	read-only	Aggregate radio bandwidth.
WLB wlBaseCfgBasicRate	1.3.6.1.4.1.5504.2.5.46.1.1.1.14	WlBasicRates	read-write	The rate when the radio is operating in basic 802.11b/g mode. Enumeration of: default(1), -- use the factory defaulted basic rate all(2), -- allow all supported basic rates rate1And2(3), -- restrict the basic rates to 1Mbps and 2Mbps stdRates(4) -- restrict the basic rates to the standard rates of -- 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps, 12Mbps, 24Mbps
U32 wlBaseCfgBeaconInterval	1.3.6.1.4.1.5504.2.5.46.1.1.1.18	Unsigned32	read-write	The interval at which Beacons are generated.
T/F wlBaseCfgBridgeRefresh	1.3.6.1.4.1.5504.2.5.46.1.1.1.32	TruthValue	read-only	Scans for any wireless bridge devices in range and displays them in the Remote Bridge MAC Address table. Selecting true(1) will update the wireless bridge devices in range. Wait for a few seconds for the update.
WLB wlBaseCfgBridgeRestrictMode	1.3.6.1.4.1.5504.2.5.46.1.1.1.31	WlBridgeRestrictModes	read-write	Configure the bridge restriction mode: enable(1), enableScan(2), disable(3),
WLC wlBaseCfgChannel	1.3.6.1.4.1.5504.2.5.46.1.1.1.4	WlChannelSelections	read-write	The configured wifi channel number or 'auto' for automatic selection of a channel with low interference.
WLC wlBaseCfgCurrentChannel	1.3.6.1.4.1.5504.2.5.46.1.1.1.5	WlChannelSelections	read-only	The actual wifi channel number in use.
U32 wlBaseCfgDTIMInterval	1.3.6.1.4.1.5504.2.5.46.1.1.1.17	Unsigned32	read-write	The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for tranmission.
T/F wlBaseCfgEnable	1.3.6.1.4.1.5504.2.5.46.1.1.1.2	TruthValue	read-write	Enable or disable the wireless adapter.
wlBaseCfgEntry	1.3.6.1.4.1.5504.2.5.46.1.1.1		not-accessible	Table of entries of basic Wireless Adapter Configuration objects.
U32 wlBaseCfgFragThreshold	1.3.6.1.4.1.5504.2.5.46.1.1.1.15	Unsigned32	read-write	The threshold at which packets are fragmented.
U32 wlBaseCfgGlobalMaxClients	1.3.6.1.4.1.5504.2.5.46.1.1.1.19	Unsigned32	read-write	The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all clients on all active SSIDs.
U32 wlBaseCfgIndex	1.3.6.1.4.1.5504.2.5.46.1.1.1.1	Unsigned32	not-accessible	Basic wireless adapter interface index.
WLM wlBaseCfgMimoNEwc	1.3.6.1.4.1.5504.2.5.46.1.1.1.8	WlMimoNEwcModes	read-write	Radio 802.11n Enhanced Wireless Consortium (EWC) mode: auto(1) disable(2)
WLM wlBaseCfgMimoNProtection	1.3.6.1.4.1.5504.2.5.46.1.1.1.10	WlMimoNProtectionModes	read-write	Multiple Input Multiple Output(MIMO) 802.11n protection mode. Enumeration of: off(1), auto(2),
WLM wlBaseCfgMimoNRate	1.3.6.1.4.1.5504.2.5.46.1.1.1.9	WlMimoNRates	read-write	The configured Multiple Input Multiple Output (MIMO) 802.11n rate. Enumeration of: auto(1), use54g(2), rate6Dot5(3), rate13(4), rate19Dot5(5), rate26(6), rate39(7), rate52(8), rate58Dot5(9), rate65(10), rate78(11), rate104(12), rate117(13), rate130(14)
WL5 wlBaseCfgMulticastRate	1.3.6.1.4.1.5504.2.5.46.1.1.1.13	Wl54gMulticastRates	read-write	The rate for multicast traffic. Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12)
T/F wlBaseCfgNClientsOnly	1.3.6.1.4.1.5504.2.5.46.1.1.1.11	TruthValue	read-write	Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.
U32 wlBaseCfgRTSThreshold	1.3.6.1.4.1.5504.2.5.46.1.1.1.16	Unsigned32	read-write	The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network.
wlBaseCfgTable	1.3.6.1.4.1.5504.2.5.46.1.1		not-accessible	Table of basic Wireless Adapter Configuration objects.
U32 wlBaseCfgTxPowerPercent	1.3.6.1.4.1.5504.2.5.46.1.1.1.21	Unsigned32	read-write	The percentage of total power that should be used for data transmissions.
T/F wlBaseCfgWMMApsd	1.3.6.1.4.1.5504.2.5.46.1.1.1.24	TruthValue	read-write	Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.
T/F wlBaseCfgWMMEnable	1.3.6.1.4.1.5504.2.5.46.1.1.1.22	TruthValue	read-write	Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.
T/F wlBaseCfgWMMNoAck	1.3.6.1.4.1.5504.2.5.46.1.1.1.23	TruthValue	read-write	Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data.
WLW wlBaseCfgWpsAddClientMethod	1.3.6.1.4.1.5504.2.5.46.1.1.1.25	WlWpsAddClientMethod	read-write	Configure the method of adding Clients: pushButton(1), accessPointPIN(2), stationPIN(3)
T/F wlBaseCfgWpsAddEnrollee	1.3.6.1.4.1.5504.2.5.46.1.1.1.29	TruthValue	read-only	Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for pushButton(1), then the user must simultaneously push the WPS button on the rear panel of the wireless zNID and set this object to true(1) for push button registration on the client device.
T/F wlBaseCfgWpsApMode	1.3.6.1.4.1.5504.2.5.46.1.1.1.26	TruthValue	read-only	Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider is using an external registrar for security, select true(1). The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Select wlBaseCfgWpsConfigAp to begin the registration process with the client.
T/F wlBaseCfgWpsConfigAp	1.3.6.1.4.1.5504.2.5.46.1.1.1.27	TruthValue	read-only	Start AP configuration. If your provider is using an external registrar for security, wlBaseCfgWpsApMode then select true(1) to begin the registration process with the client.
OCT wlBaseCfgWpsDevicePIN	1.3.6.1.4.1.5504.2.5.46.1.1.1.28	OCTET STRING	read-only	Device PIN provided by external registrar.
OCT wlBaseCfgWpsStationPIN	1.3.6.1.4.1.5504.2.5.46.1.1.1.30	OCTET STRING	read-only	Station PIN provided by user.
T/F wlBaseCfgXPress	1.3.6.1.4.1.5504.2.5.46.1.1.1.20	TruthValue	read-write	Enable or disable the XPress(TM) Technology.
wlMACFilterEntry	1.3.6.1.4.1.5504.2.5.46.1.4.1		not-accessible	Entries in the Wireless MAC filter rules for a virtual wireless interface.
OCT wlMACFilterIfName	1.3.6.1.4.1.5504.2.5.46.1.4.1.4	OCTET STRING	read-only	The virtual interface name to which this rule applies.
U32 wlMACFilterIndex	1.3.6.1.4.1.5504.2.5.46.1.4.1.1	Unsigned32	not-accessible	The Wireless MAC filter table index.
MAC wlMACFilterMacAddr	1.3.6.1.4.1.5504.2.5.46.1.4.1.3	MacAddress	read-only	The MAC address which to apply to the filter rule.
ZHO wlMACFilterRowStatus	1.3.6.1.4.1.5504.2.5.46.1.4.1.5	ZhoneRowStatus	read-create	The SNMP RowStatus of the current row. When creating a new MAC Filter entry for a virtual wireless interface, only the MAC Address must be specified. The wlVirtualIndex will be used to determine the SSID and the filter mode to apply.
OCT wlMACFilterSsid	1.3.6.1.4.1.5504.2.5.46.1.4.1.2	OCTET STRING	read-only	The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface.
wlMACFilterTable	1.3.6.1.4.1.5504.2.5.46.1.4		not-accessible	Table of Wireless MAC filter rules for a virtual wireless interface. The MAC Filter table contains a list of MAC addresses for devices that are permitted to connect, or prevented from connecting to the wireless service.
wlScanWdsMACAddrEntry	1.3.6.1.4.1.5504.2.5.46.1.6.1		not-accessible	Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
wlScanWdsMACAddrTable	1.3.6.1.4.1.5504.2.5.46.1.6		not-accessible	Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
U32 wlScanWdsMACIndex	1.3.6.1.4.1.5504.2.5.46.1.6.1.1	Unsigned32	not-accessible	The index into the WDS scanned table of Remote MAC Addresses that may access a wireless LAN interface.
MAC wlScanWdsRemoteMACAddr	1.3.6.1.4.1.5504.2.5.46.1.6.1.2	MacAddress	read-only	The MAC address previously scanned that is permitted WDS bridge access to the wireless LAN interface.
WLA wlSecurityAuthMode	1.3.6.1.4.1.5504.2.5.46.1.3.1.3	WlAuthenticationModes	read-write	Configure the network authentication method: mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9)
U32 wlSecurityCurrentWepKeyIndex128	1.3.6.1.4.1.5504.2.5.46.1.3.1.13	Unsigned32	read-write	Index into array of 128-bit encryption keys.
U32 wlSecurityCurrentWepKeyIndex64	1.3.6.1.4.1.5504.2.5.46.1.3.1.12	Unsigned32	read-write	Index into array of 64-bit encryption keys.
wlSecurityEntry	1.3.6.1.4.1.5504.2.5.46.1.3.1		not-accessible	Table of entries, per virtual LAN interface, of Wireless Security objects.
WLM wlSecurityMACFilterMode	1.3.6.1.4.1.5504.2.5.46.1.3.1.24	WlMACFilterModes	read-write	Configure the MAC Filter mode. The MAC Filter rules defined in the wlMACFilterTable will be ignored when this object is set to disable(3).
OCT wlSecurityRadiusKey	1.3.6.1.4.1.5504.2.5.46.1.3.1.10	OCTET STRING	read-write	Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks.
U32 wlSecurityRadiusPort	1.3.6.1.4.1.5504.2.5.46.1.3.1.9	Unsigned32	read-write	UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS).
IP wlSecurityRadiusServerIP	1.3.6.1.4.1.5504.2.5.46.1.3.1.8	IpAddress	read-write	IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication.
OCT wlSecuritySsid	1.3.6.1.4.1.5504.2.5.46.1.3.1.1	OCTET STRING	read-only	The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface.
wlSecurityTable	1.3.6.1.4.1.5504.2.5.46.1.3		not-accessible	Table of Wireless Security Configuration, Status and Statistics objects for virtual LAN interfaces.
OCT wlSecurityWep128Key1	1.3.6.1.4.1.5504.2.5.46.1.3.1.18	OCTET STRING	read-write	WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
OCT wlSecurityWep128Key2	1.3.6.1.4.1.5504.2.5.46.1.3.1.19	OCTET STRING	read-write	WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
OCT wlSecurityWep128Key3	1.3.6.1.4.1.5504.2.5.46.1.3.1.20	OCTET STRING	read-write	WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
OCT wlSecurityWep128Key4	1.3.6.1.4.1.5504.2.5.46.1.3.1.21	OCTET STRING	read-write	WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
OCT wlSecurityWep64Key1	1.3.6.1.4.1.5504.2.5.46.1.3.1.14	OCTET STRING	read-write	WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
OCT wlSecurityWep64Key2	1.3.6.1.4.1.5504.2.5.46.1.3.1.15	OCTET STRING	read-write	WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
OCT wlSecurityWep64Key3	1.3.6.1.4.1.5504.2.5.46.1.3.1.16	OCTET STRING	read-write	WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
OCT wlSecurityWep64Key4	1.3.6.1.4.1.5504.2.5.46.1.3.1.17	OCTET STRING	read-write	WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
WLS wlSecurityWepKey	1.3.6.1.4.1.5504.2.5.46.1.3.1.11	WlSecurityKeyCodes	read-write	Security encryption strength: bit64(1) bit128(2)
WLW wlSecurityWepStatus	1.3.6.1.4.1.5504.2.5.46.1.3.1.7	WlWepModes	read-write	Status of Wireless Encryption Protocol (WEP) encryption: disabled(1) enabled(2)
U32 wlSecurityWpa2NetReauth	1.3.6.1.4.1.5504.2.5.46.1.3.1.23	Unsigned32	read-write	Configure the WPA2 network re-authentication time, in seconds.
T/F wlSecurityWpa2Preauth	1.3.6.1.4.1.5504.2.5.46.1.3.1.22	TruthValue	read-write	Enable or disable WPA2 pre-authentication.
U32 wlSecurityWpaGTKRekey	1.3.6.1.4.1.5504.2.5.46.1.3.1.5	Unsigned32	read-write	WPA Group Rekey Interval.
WLW wlSecurityWpaMode	1.3.6.1.4.1.5504.2.5.46.1.3.1.6	WlWpaModes	read-write	WPA/WAPI Encryption mode: tkip(1), aes(2), tkipAes(3)
OCT wlSecurityWpaPsk	1.3.6.1.4.1.5504.2.5.46.1.3.1.4	OCTET STRING	read-write	WPA/WPAI Passphrase. This field cannot contain a SPACE and is returned as a string of asterisks.
T/F wlSecurityWps	1.3.6.1.4.1.5504.2.5.46.1.3.1.2	TruthValue	read-only	Enable or disable WiFi Protected Setup (WPS) security method. If WPS is disabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network.
wlStaticWdsMACAddrEntry	1.3.6.1.4.1.5504.2.5.46.1.5.1		not-accessible	Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
wlStaticWdsMACAddrTable	1.3.6.1.4.1.5504.2.5.46.1.5		not-accessible	Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
U32 wlStaticWdsMACIndex	1.3.6.1.4.1.5504.2.5.46.1.5.1.1	Unsigned32	not-accessible	The index into the static WDS Remote MAC Address table for a wireless LAN interface.
MAC wlStaticWdsRemoteMACAddr	1.3.6.1.4.1.5504.2.5.46.1.5.1.2	MacAddress	read-write	The MAC address that is permitted WDS bridge access to the wireless LAN interface.
T/F wlVirtualAPIsolation	1.3.6.1.4.1.5504.2.5.46.1.2.1.3	TruthValue	read-write	Enable or disable the isolation of clients by enabling or disabling secure forwarding mode. This will preventpreventing one client from sending packets directly to another client. All packets are forwarded upstream on the WAN interface.
MAC wlVirtualBssMacAddr	1.3.6.1.4.1.5504.2.5.46.1.2.1.7	MacAddress	read-only	MAC Address assigned to the primary SSID.
WLC wlVirtualCountryCode	1.3.6.1.4.1.5504.2.5.46.1.2.1.8	WlCountryCodes	read-only	Two character country code. The country code is automatically configured based upon the model number of the unit. All countries with 100mW EIRP maximum transmit power use the United Kingdom country code. North American models may use the maximum transmit power of 300mW EIRP.
T/F wlVirtualDisableWme	1.3.6.1.4.1.5504.2.5.46.1.2.1.4	TruthValue	read-write	Enable or disable the Wireless Multi-Media mode.
T/F wlVirtualEnable	1.3.6.1.4.1.5504.2.5.46.1.2.1.10	TruthValue	read-write	Enable or disable a single Wireless Virtual LAN Interface
T/F wlVirtualEnableWmf	1.3.6.1.4.1.5504.2.5.46.1.2.1.5	TruthValue	read-write	Enable or disable Wireless Multicast Forwarding.
T/F wlVirtualHide	1.3.6.1.4.1.5504.2.5.46.1.2.1.2	TruthValue	read-write	Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate.
U32 wlVirtualIndex	1.3.6.1.4.1.5504.2.5.46.1.2.1.1	Unsigned32	not-accessible	Basic access point interface index. Guest (or Virtual) access points begin with index = 2.
wlVirtualIntfEntry	1.3.6.1.4.1.5504.2.5.46.1.2.1		not-accessible	Entries in Wireless Vitrual LAN Interface Table.
wlVirtualIntfTable	1.3.6.1.4.1.5504.2.5.46.1.2		not-accessible	Table of Wireless Virtual LAN Interface Configuration, Status and Statistics objects.
U32 wlVirtualMaxClients	1.3.6.1.4.1.5504.2.5.46.1.2.1.9	Unsigned32	read-write	Maximum number of client devices that may be simultaneously connected to this SSID. The maximum clients value assigned to each access points must not exceed the global maximum clients value.
OCT wlVirtualSsid	1.3.6.1.4.1.5504.2.5.46.1.2.1.6	OCTET STRING	read-write	Configure the Primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to the virtual wireless interfaces.
zhnWireless	1.3.6.1.4.1.5504.2.5.46			This file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs.
zhnWirelessCompliance	1.3.6.1.4.1.5504.2.5.46.2.2.1			The Compliance statement for SNMP entities which manage the Zhone CPE Wireless Configuration, Status and Statistics Information
zhnWirelessCompliances	1.3.6.1.4.1.5504.2.5.46.2.2
zhnWirelessConformance	1.3.6.1.4.1.5504.2.5.46.2
zhnWirelessGroups	1.3.6.1.4.1.5504.2.5.46.2.1
zhnWirelessObjects	1.3.6.1.4.1.5504.2.5.46.1
zhnWlAuthStationsGroup	1.3.6.1.4.1.5504.2.5.46.2.1.7			A collection of Zhone Wireless objects that indentify the stations that have authenticated with the Access Point.
zhnWlBaseCfgGroup	1.3.6.1.4.1.5504.2.5.46.2.1.1			A collection of Zhone Wireless objects that describe the WLAN adapter basic configuration and status information.
zhnWlMACFilterGroup	1.3.6.1.4.1.5504.2.5.46.2.1.4			A collection of Zhone Wireless objects that describe the WLAN MAC filter rules.
zhnWlScanWdsMACAddrGroup	1.3.6.1.4.1.5504.2.5.46.2.1.6			A collection of Zhone Wireless objects that describe the WLAN WDS Scanned MAC addresses.
zhnWlSecurityGroup	1.3.6.1.4.1.5504.2.5.46.2.1.3			A collection of Zhone Wireless objects that describe the WLAN virtual interface security information.
zhnWlStaticWdsMACAddrGroup	1.3.6.1.4.1.5504.2.5.46.2.1.5			A collection of Zhone Wireless objects that describe the WLAN statically configured WDS MAC addresses.
zhnWlVirtualCfgGroup	1.3.6.1.4.1.5504.2.5.46.2.1.2			A collection of Zhone Wireless objects that describe the WLAN virtual interface configuration and status information.

RFC description

Manages wireless configuration and status for Zhone CPE devices including security and virtual interfaces.

Start monitoring Zhone Technologies ZNID residential gateway CPE devices (Wi-Fi channel/power/MIMO config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHNWIRELESS

What Is ZHNWIRELESS?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description