ZHNLANDEVICE

All MIBs › ZHNLANDEVICE

Organization: Zhone Technologies, Inc.

Last Updated: 2012-06-13

Category: Zhone Technologies CPE and Access

Description: Manages Zhone Technologies LAN device configuration including Ethernet ports, DHCP, and IP addressing.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHNLANDEVICE?

ZHNLANDEVICE defines private enterprise MIB extensions from Zhone Technologies for the LAN-side Ethernet, USB, WLAN, and MoCA interfaces on Zhone customer-premises equipment (CPE) such as residential/business gateways. It exposes categories of data including per-LAN-device Ethernet/USB/WLAN/MoCA interface counts and configuration, IGMP snooping settings for multicast control, DHCP/host configuration, and general IP interface objects. Its primary monitoring value is configuration and interface-state visibility rather than classic hardware sensors: an admin can confirm how many Ethernet, USB, wireless, or MoCA interfaces are present and active on the CPE, and whether IGMP snooping is correctly enabled for IPTV/multicast traffic. It builds on standard host-resources and IP-interface conventions (e.g., a lanHostConfigManagementObjects-style structure) reflecting typical broadband CPE management practice. It is typically deployed by broadband service providers to remotely manage Zhone residential/SMB gateways delivering triple-play (data/voice/video) service. Engineers can download the ZHNLANDEVICE file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHNLANDEVICE. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone Technologies residential/business gateway (CPE)
broadband router with Ethernet/WLAN/MoCA/USB interfaces

Monitoring Examples

An operator would poll lanDeviceTable/lanDeviceEntry (keyed by lanDeviceIndex) alongside lanEthernetInterfaceNumberOfEntries, lanWLANConfigurationNumberOfEntries, and lanMocaInterfaceNumberOfEntries to inventory which LAN interface types are provisioned on a given CPE unit. Checking igmpSnoopingCfgTable/igmpSnoopingCfgEntry (igmpEnable, igmpMode, igmpIfName) would reveal whether IGMP snooping is active on the LAN bridge, which is critical for diagnosing multicast/IPTV channel-change problems. A mismatch between expected and reported lanUSBInterfaceNumberOfEntries could indicate a failed or unrecognized USB peripheral on the gateway.

What Can Be Monitored

Ethernet/USB/WLAN/MoCA interface counts
LAN device inventory and index
IGMP snooping configuration
IGMP mode per interface
DHCP/host configuration
IP interface settings

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

From ZHNLAYER2BRIDGING

VlanTypeValues

From Zhone

zhoneWtn

OBJECT-IDENTITY

From Zhone-TC

ZhoneRowStatus

How to Use in IPNetwork Monitor

Example using bytesSent OID:

Select a Zhone Technologies broadband gateway/router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type bytesSent into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total number of bytes sent over the interface since the CPE was last reset. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zhnLANDevice	1.3.6.1.4.1.5504.2.5.41			This file defines the private Enterprise MIB extensions that define LAN ethernet interface related objects supported by the Zhone CPEs.
zhnLANDeviceObjects	1.3.6.1.4.1.5504.2.5.41.1
lanDeviceTable	1.3.6.1.4.1.5504.2.5.41.1.1		not-accessible	Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces
lanDeviceEntry	1.3.6.1.4.1.5504.2.5.41.1.1.1		not-accessible	Table of LAN devices, including Ethernet, WLAN, and USB physical interfaces. Each instance contains all LAN-related objects for a given bridged subnet.
U32 lanDeviceIndex	1.3.6.1.4.1.5504.2.5.41.1.1.1.1	Unsigned32	not-accessible	LAN Device ifIndex
U32 lanEthernetInterfaceNumberOfEntries	1.3.6.1.4.1.5504.2.5.41.1.1.1.2	Unsigned32	read-only	Number of instances of lanEthernetInterfaceConfig entries for this LAN device.
U32 lanUSBInterfaceNumberOfEntries	1.3.6.1.4.1.5504.2.5.41.1.1.1.3	Unsigned32	read-only	Number of instances of lanUSBInterfaceConfig entries for this LAN device.
U32 lanWLANConfigurationNumberOfEntries	1.3.6.1.4.1.5504.2.5.41.1.1.1.4	Unsigned32	read-only	Number of instances of lanWLANInterfaceConfig entries for this LAN device.
U32 lanMocaInterfaceNumberOfEntries	1.3.6.1.4.1.5504.2.5.41.1.1.1.5	Unsigned32	read-only	Number of instances of lanMocaInterfaceConfig entries for this LAN device.
igmpSnoopingCfgTable	1.3.6.1.4.1.5504.2.5.41.1.2		not-accessible	Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces
igmpSnoopingCfgEntry	1.3.6.1.4.1.5504.2.5.41.1.2.1		not-accessible	Table of IGMP configuration information for LAN devices, including Ethernet, WLAN, and USB physical interfaces.
T/F igmpEnable	1.3.6.1.4.1.5504.2.5.41.1.2.1.1	TruthValue	read-write	Enables or disables IGMP snooping for the LAN device.
IGM igmpMode	1.3.6.1.4.1.5504.2.5.41.1.2.1.2	IGMPSnoopingModeValues	read-write	IGMP Snooping mode. Enumeration of: Standard Blocking
OCT igmpIfName	1.3.6.1.4.1.5504.2.5.41.1.2.1.3	OCTET STRING	read-only	The interface name for this LAN device. This object has the same value as the ipInterfaceifName object in the ipInterfaceTable and is included within the IGMP table for convenience purposes.
lanHostConfigManagementObjects	1.3.6.1.4.1.5504.2.5.41.1.3
lanHostConfigManagementTable	1.3.6.1.4.1.5504.2.5.41.1.3.1		not-accessible	Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces
lanHostConfigManagementEntry	1.3.6.1.4.1.5504.2.5.41.1.3.1.1		not-accessible	Table of LAN Host Configuration Management information for LAN devices, including Ethernet, WLAN, and USB physical interfaces
T/F dhcpServerConfigurable	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.1	TruthValue	read-write	Enables the configuration of the DHCP server on the LAN interface If this variable is set to false, the CPE should restore its default DHCP server settings.
T/F zhnDhcpServerEnable	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.2	TruthValue	read-write	Enables or disables the DHCP server on the LAN interface.
T/F dhcpRelay	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.3	TruthValue	read-only	Indicates if the DHCP server performs the role of a server or a relay on the LAN interface.
IP dhcpRelayServer	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.4	IpAddress	read-write	DHCP Relay Server IP Address.
IP minAddress	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.5	IpAddress	read-write	Specifies first address in the pool to be assigned by the DHCP server on the LAN interface.
IP maxAddress	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.6	IpAddress	read-write	Specifies last address in the pool to be assigned by the DHCP server on the LAN interface.
OCT reservedAddresses	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.7	OCTET STRING	read-write	Comma separated list of addresses marked reserved from the address allocation pool.
IP subnetMask	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.8	IpAddress	read-write	DHCP client subnet mask
OCT dnsServers	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.9	OCTET STRING	read-write	Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional.
OCT domainName	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.10	OCTET STRING	read-write	Sets the domain name to provide to clients on the LAN interface.
OCT ipRouters	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.11	OCTET STRING	read-write	Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional.
INT dhcpLeaseTime	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.12	INTEGER	read-write	Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease.
U32 ipInterfaceNumberOfEntries	1.3.6.1.4.1.5504.2.5.41.1.3.1.1.13	Unsigned32	read-only	Number of IP interface at LAN side of the CPE. 1 is a typical value for CPE not supporting Multihomed interfaces. Support for more than one interface instance is Optional.
ipInterfaceObjects	1.3.6.1.4.1.5504.2.5.41.1.3.2
zhnIpInterfaceTable	1.3.6.1.4.1.5504.2.5.41.1.3.2.1		not-accessible	IP interface table.
zhnIpInterfaceEntry	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1		not-accessible	IP interface table.
U32 ipInterfaceIndex	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.1	Unsigned32	not-accessible	LAN IP Address Index
T/F ipInterfaceEnable	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.2	TruthValue	read-only	Enables or disables this entry.
IP ipInterfaceIPAddress	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.3	IpAddress	read-write	IP address of the LAN-side interface of the CPE.
IP ipInterfaceSubnetMask	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.4	IpAddress	read-write	Subnet mask of the LAN-side interface of the CPE.
NUM ipInterfaceAddressingType	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.5	IPInterfaceAddressingTypeValues	read-write	Represents the addressing method used to assign the LAN-side IP address of the CPE on this interface of the CPE. Enumeration of: DHCP Static Auto-IP
OCT ipInterfaceifName	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.6	OCTET STRING	read-only	The interface name for this LAN device.
T/F firewallEnabled	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.7	TruthValue	read-write	Indicates if a stateful firewall is enabled for all traffic from this IP interface to the modem. If TRUE, all inbound local traffic (from LAN to modem) that is not responding to an outbound packet or listed in the firewall exception table will be blocked.
IP defaultGateway	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.8	IpAddress	read-write	The IP address of the default gateway for this IP interface. This parameter is configurable only if the AddressingType is Static.
T/F natEnabled	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.9	TruthValue	read-write	This parameter enables or disables NAT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
U32 dhcpcPid	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.10	Unsigned32	read-only	If the address type is DHCP, then we will start a DHCP client to get the IP address for this IP interface. The process ID (pid) is stored in this field. A pid of 0 indicates that no dhcpc is running.
DNS dnsType	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.11	DNSTypeValues	read-write	This object specifies the DNS mode for this IP interface. The DNS associates hostname-to-IP address, and so domain names and IP addresses can be used interchangeably. Enumeration of: Default - Get the DNS information from the uplink interface Static - The DNSinformation is manually provisioned DHCP - The DNS information is obtained via DHCP
IP primaryDnsIPAddress	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.12	IpAddress	read-write	The DNS server primary IP address.
IP secondaryDnsIPAddress	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.13	IpAddress	read-write	The DNS server secondary IP address.
VLA zhnVlanType	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.14	VlanTypeValues	read-write	This object specifies the VLAN connection type of the interface.
IPP connectionType	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.15	IpPppoeConnectionTypeValues	read-write	This object specifies the connection type of the interface.
U32 maxMTUSize	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.16	Unsigned32	read-write	The maximum size of IP packet that can be transmitted without fragmentation - including IP headers but excluding headers from lower levels in the protocol stack. The default MTU size is 1500 bytes.
OCT alternateWanIfName	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.17	OCTET STRING	read-write	Name of a different VLAN WAN interface to run on if the current VLAN WAN interface is set to unconfigured.
T/F naptEnabled	1.3.6.1.4.1.5504.2.5.41.1.3.2.1.1.18	TruthValue	read-write	This parameter enables or disables NAPT for this IP interface. This parameter is configurable only if this interface is on an uplink port.
pppoeConfigObjects	1.3.6.1.4.1.5504.2.5.41.1.3.2.2
pppoeConfigTable	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1		not-accessible	PPPoE configuration interface table for LAN interfaces.
pppoeConfigEntry	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1		not-accessible	PPPoE configuration table entry.
OCT pppoeIfName	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.1	OCTET STRING	read-only	The interface name for this LAN device.
U32 pid	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.2	Unsigned32	read-only	This object holds the process id (pid) of the pppd associated with this connection. A pid of 0 indicates that there is no pppd running.
PPP connectionRequest	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.3	PPPUserConnectionRequestValues	read-write	This object is used to bring up or down a PPPoE connection. Enumeration of: None Down Up Connect Disconnect
OCT username	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.4	OCTET STRING	read-write	PPP requires that you have a user name and password to establish your connection. This object is the login user name to be used for PPP authentication.
OCT password	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.5	OCTET STRING	read-write	PPP requires that you have a user name and password to establish your connection. This object is the login password to be used for PPP authentication. When read, this parameter returns an empty string, regardless of the actual value.
PPP authentication	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.6	PPPAuthenticationProtocolValues	read-write	This object is the PPP authentication protocol to be used for PPP authentication. Enumeration of: AUTO_AUTH PAP CHAP MS-CHAP
OCT serviceName	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.7	OCTET STRING	read-write	This object is the PPP Service Name. It should be filled only if specified by the provider.
PPP encryptionProtocol	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.8	PPPEncryptionProtocolValues	read-write	This object describes the PPP encryption protocol. Enumeration of: None MPPE
PPP compressionProtocol	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.9	PPPCompressionProtocolValues	read-write	This object describes the PPP compression protocol used between the WAN device and the ISP POP. Enumeration of: None VanJacobsen STAC-LZS
U32 idleDisconnectTime	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.10	Unsigned32	read-write	The time in seconds that if the connection remains idle, the CPE automatically terminates the connection. A value of 0 (zero) indicates that the connection is not to be shutdown automatically.
U32 holdOffTime	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.11	Unsigned32	read-write	Set time in seconds before retrying connection.
T/F useStaticIpAddress	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.12	TruthValue	read-write	If TRUE, PPPoE connection will use a static IP address.
IP staticIpAddress	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.13	IpAddress	read-write	PPPoE static IP address.
T/F enableDebug	1.3.6.1.4.1.5504.2.5.41.1.3.2.2.1.1.14	TruthValue	read-write	Enable PPPoE debug.
pppoeStatusObjects	1.3.6.1.4.1.5504.2.5.41.1.3.2.3
pppoeStatusTable	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1		not-accessible	PPPoE configuration interface table for LAN interfaces.
pppoeStatusEntry	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1		not-accessible	PPPoE status table entry.
WAN connectionStatus	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.1	WANPppConnectionStatusValues	read-only	Current status of the PPP connection.
WAN lastConnectionError	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.2	WANPppLastConnectionErrorValues	read-only	The failure reason of the last PPP connection setup.
U32 connectionEstablishedTime	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.3	Unsigned32	read-only	The last time the PPP connection was established.
U32 currentMTUSize	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.4	Unsigned32	read-only	The current MTU in use over this connection.
U32 uptime	1.3.6.1.4.1.5504.2.5.41.1.3.2.3.1.1.5	Unsigned32	read-only	The time in seconds this connection has been up.
zhnDhcpConditionalServingPoolObjects	1.3.6.1.4.1.5504.2.5.41.1.3.3
zhnDhcpConditionalServingPoolTable	1.3.6.1.4.1.5504.2.5.41.1.3.3.1		not-accessible	A collection of configuration parameters for DHCP conditional serving.
zhnDhcpConditionalServingPoolEntry	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1		not-accessible	DHCP Conditional Serving Pool table.
U32 dhcpPoolIndex	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.1	Unsigned32	not-accessible	DHCP pool index
T/F dhcpPoolEnable	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.2	TruthValue	read-only	Enables or disables this entry.
MAC dhcpPoolChaddr	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.3	MacAddress	read-write	MAC address of the physical interface of the DHCP client. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving.
MAC dhcpPoolChaddrMask	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.4	MacAddress	read-write	Chaddr is only to be done for bit positions set to one in the mask. A mask of FF:FF:FF:FF:FF:FF indicates all bits of the Chaddr are to be used for classification. A perfect match is needed. An empty value indicates this criterion is not used for conditional serving.
IP dhcpPoolMinAddress	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.5	IpAddress	read-write	Specifies first address in the pool to be assigned by the DHCP server on the LAN interface.
IP dhcpPoolMaxAddress	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.6	IpAddress	read-write	Specifies last address in the pool to be assigned by the DHCP server on the LAN interface.
OCT dhcpPoolReservedAddresses	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.7	OCTET STRING	read-write	Comma separated list of addresses marked reserved from the address allocation pool.
IP dhcpPoolSubnetMask	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.8	IpAddress	read-write	Specifies the clients network subnet mask.
OCT dhcpPoolDnsServers	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.9	OCTET STRING	read-write	Comma separated list of DNS servers offered to DHCP clients. Support for more than three DNS Servers is Optional.
OCT dhcpPoolDomainName	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.10	OCTET STRING	read-write	Sets the domain name to provide to clients on the LAN interface.
OCT dhcpPoolIPRouters	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.11	OCTET STRING	read-write	Comma separated list of IP addresses of routers on this subnet. Also known as default gateway. Support for more than one Router address is Optional.
INT dhcpPoolLeaseTime	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.12	INTEGER	read-write	Specifies the lease time in seconds of client assigned addresses. A value of -1 indicates an infinite lease.
U32 dhcpPoolUseWanVlan	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.13	Unsigned32	read-write	The WAN VLAN is used to determine the default gateway router for upstream packets that have a source IP address in this subnet. A zero value indicates that the WAN VLAN is not used.
T/F dhcpPoolEnableStaticLease	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.14	TruthValue	read-write	Enable this option to permanently bind the IP address to the client MAC.
ZHO dhcpPoolRowStatus	1.3.6.1.4.1.5504.2.5.41.1.3.3.1.1.15	ZhoneRowStatus	read-write	The SNMP RowStatus of the current row. The following object must be specified upon row creation: dhcpPoolChaddr
zhnLANEthernetInterfaceObjects	1.3.6.1.4.1.5504.2.5.41.1.4
lanEthernetInterfaceConfigTable	1.3.6.1.4.1.5504.2.5.41.1.4.1		not-accessible	Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side.
lanEthernetInterfaceConfigEntry	1.3.6.1.4.1.5504.2.5.41.1.4.1.1		not-accessible	Table entry for LAN ethernet interface configuration objects.
U32 lanEthernetIndex	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.1	Unsigned32	not-accessible	LAN Ethernet Interface Index
T/F lanEthernetEnable	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.2	TruthValue	read-write	Enables or disables this interface.
LAN lanEthernetStatus	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.3	LANEthernetStatusValues	read-only	Indicates the status of this interface. Enumeration of: Up NoLink Error Disabled
OCT macAddress	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.4	OCTET STRING	read-only	ASCII representation of the physical address of the interface
T/F macAddressControlEnabled	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.5	TruthValue	read-only	Indicates whether MAC Address Control is enabled or not on this interface. MAC Address Control limits the clients that connect to those that match a list of allowed MAC addresses specified in InternetGatewayDevice.LANDevice.{i}.LANHostConfigManagement.AllowedMACAddresses.
LAN maxBitRate	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.6	LANEthernetMaxBitRateValues	read-write	The maximum upstream and downstream bit rate available to this connection. Enumeration of: 10 100 1000 Auto
LAN duplexMode	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.7	LANEthernetDuplexModeValues	read-write	The duplex mode available to this connection. Enumeration of: Half Full Auto
OCT zhnIfName	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.8	OCTET STRING	read-only	Ethernet interface name such as eth0, eth1.
U32 zhnEthernetPriorityMark	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.9	Unsigned32	read-only	802.1P priority value for this ethernet interface. Assigment of priority values is done via the Layer 2 Bridge Marking Table. Therefore, this object is read-only.
U32 dot1qPvid	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.10	Unsigned32	read-write	Default 802.1Q VLAN ID for this ethernet interface.
OCT lanEthernetAlias	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.11	OCTET STRING	read-only	A descriptive name for this ethernet interface.
LAN pauseMode	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.12	LANEthernetPauseModeValues	read-write	The pause mode available to this connection. Enumeration of: Auto Enable Disable
LAN lanEthernetAcl	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.13	LANEthernetAclValues	read-write	The access list values available to an ethernet interface. Enumeration of: Disable BlackList WhiteList Unsupported
U32 lanEthernetAclRulesNumberofEntries	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.14	Unsigned32	read-only	The number of entries in the access list table for this ethernet interface.
T/F lanEthernetLanFollowsWan	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.15	TruthValue	read-write	Enable or disable this LAN interface based upon the WAN status.
U32 lanEthernetIgmpPriorityMark	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.16	Unsigned32	read-write	The 802.1P priority value that this LAN interface will assign to ingress untagged IGMP frames.
U32 lanEthernetIgmpPvid	1.3.6.1.4.1.5504.2.5.41.1.4.1.1.17	Unsigned32	read-write	The VLAN ID that this LAN interface will assign to ingress untagged IGMP frames.
lanEthIntfStatisticsTable	1.3.6.1.4.1.5504.2.5.41.1.4.2		not-accessible	Table of LAN ethernet interface statistics objects. This object contains statistics for an Ethernet LAN connection on a CPE device.
lanEthIntfStatisticsEntry	1.3.6.1.4.1.5504.2.5.41.1.4.2.1		not-accessible	Table entry for LAN ethernet interface statistics objects.
G32 bytesSentEx	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.1	Gauge32	read-only	Total number of bytes sent over the interface since the CPE was last reset.
G32 bytesReceived	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.2	Gauge32	read-only	Total number of bytes received over the interface since the CPE was last reset.
G32 packetsSent	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.3	Gauge32	read-only	Total number of packets sent over the interface since the CPE was last reset.
G32 packetsReceived	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.4	Gauge32	read-only	Total number of packets received over the interface since the CPE was last reset.
G32 txErrors	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.5	Gauge32	read-only	Total number of transmit errors on the interface since the CPE was last reset.
G32 rxErrors	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.6	Gauge32	read-only	Total number of receive errors on the interface since the CPE was last reset.
G32 txDrops	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.7	Gauge32	read-only	Total number of packets dropped on the transmit side of the interface since the CPE was last reset.
G32 rxDrops	1.3.6.1.4.1.5504.2.5.41.1.4.2.1.8	Gauge32	read-only	Total number of packets dropped on the receive side of the interface since the CPE was last reset.
lanEthIntfStatusTable	1.3.6.1.4.1.5504.2.5.41.1.4.3		not-accessible	Table of LAN ethernet interface status objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side.
lanEthIntfStatusEntry	1.3.6.1.4.1.5504.2.5.41.1.4.3.1		not-accessible	Table entry for LAN ethernet interface status objects.
LAN linkStatus	1.3.6.1.4.1.5504.2.5.41.1.4.3.1.1	LANEthernetStatusValues	read-only	The port's current link status.
LAN rateStatus	1.3.6.1.4.1.5504.2.5.41.1.4.3.1.2	LANEthernetMaxBitRateValues	read-only	The port's current maximum bit rate.
LAN duplexStatus	1.3.6.1.4.1.5504.2.5.41.1.4.3.1.3	LANEthernetDuplexModeValues	read-only	The port's current duplex mode.
LAN pauseStatus	1.3.6.1.4.1.5504.2.5.41.1.4.3.1.4	LANEthernetPauseModeValues	read-only	The port's current pause mode.
lanEthIntfRateLimitTable	1.3.6.1.4.1.5504.2.5.41.1.4.4		not-accessible	Table of LAN ethernet interface configuration objects. This object models an Ethernet LAN connection on a CPE device. This object must be implemented for all CPEs that contain an Ethernet interface on the LAN side.
lanEthIntfRateLimitEntry	1.3.6.1.4.1.5504.2.5.41.1.4.4.1		not-accessible	Rate limit table entry for LAN ethernet interface configuration objects.
T/F rateLimitEnable	1.3.6.1.4.1.5504.2.5.41.1.4.4.1.1	TruthValue	read-write	This object is used to enable or disable rate limit on a port. Setting it to True will rate limit traffic on the port to a specified peak rate.
U32 peakRate	1.3.6.1.4.1.5504.2.5.41.1.4.4.1.2	Unsigned32	read-write	This object identifies the maximum rate (0-1000) in Mbps on a port. If Rate Limit is disabled, this object has no effect.
LAN burstSize	1.3.6.1.4.1.5504.2.5.41.1.4.4.1.3	LANRateLimitBurstSizeValues	read-write	This object burst size. If Rate Limit is disabled, this object has no effect.
LAN rateDirection	1.3.6.1.4.1.5504.2.5.41.1.4.4.1.4	LANRateLimitDirectionValues	read-write	This object specifies the traffic direction to which the rate limit applies. The supported values are inbound, outbound or both. If the Rate Limit is disabled, this object has no effect.
U32 inboundPeakRate	1.3.6.1.4.1.5504.2.5.41.1.4.4.1.5	Unsigned32	read-write	This object identifies the maximum rate (0-1000) in Mbps on a port for inbound data. If Rate Limit is disabled, this object has no effect.
igmpGroupsTable	1.3.6.1.4.1.5504.2.5.41.1.5		not-accessible	Table of IGMP Multicast Groups currently detected by IGMP snooping.
igmpGroupsEntry	1.3.6.1.4.1.5504.2.5.41.1.5.1		not-accessible	IGMP Multicast Groups table.
U32 igmpGroupIndex	1.3.6.1.4.1.5504.2.5.41.1.5.1.1	Unsigned32	not-accessible	IGMP Multicast Groups Table Index
IP igmpGroupAddress	1.3.6.1.4.1.5504.2.5.41.1.5.1.2	IpAddress	read-only	This object identifies the IP address of the multicast group.
IP igmpGroupReporterIP	1.3.6.1.4.1.5504.2.5.41.1.5.1.3	IpAddress	read-only	This object identifies the IP address of the host in the multicast group.
OCT igmpGroupReporterMAC	1.3.6.1.4.1.5504.2.5.41.1.5.1.4	OCTET STRING	read-only	This object identifies the MAC address of the host in the multicast group.
OCT igmpGroupInterface	1.3.6.1.4.1.5504.2.5.41.1.5.1.5	OCTET STRING	read-only	This object identifies the interface that discovered the multicast group.
OCT igmpGroupVlan	1.3.6.1.4.1.5504.2.5.41.1.5.1.6	OCTET STRING	read-only	This object identifies the VLAN that discovered the multicast group.
U32 igmpGroupExpiration	1.3.6.1.4.1.5504.2.5.41.1.5.1.7	Unsigned32	read-only	This object identifies the time (in seconds) before the multicast group times out.
IP igmpGroupQuerier	1.3.6.1.4.1.5504.2.5.41.1.5.1.8	IpAddress	read-only	This object identifies the IP address to be used by a proxy querier.
zhnLANDeviceSystemObjects	1.3.6.1.4.1.5504.2.5.41.1.6
OCT lanDefaultIfName	1.3.6.1.4.1.5504.2.5.41.1.6.1	OCTET STRING	read-write	Configure the default interface name.
IP lanDefaultIfIpAddress	1.3.6.1.4.1.5504.2.5.41.1.6.2	IpAddress	read-only	The IP address of the default interface, as configured by IPInterfaceIPAddress.
lanEthAclRulesTable	1.3.6.1.4.1.5504.2.5.41.1.7		not-accessible	Table of LAN ethernet access list rules. This table contains a list of all access rules used to filter incoming traffic for a single physical ethernet interface.
lanEthAclRulesEntry	1.3.6.1.4.1.5504.2.5.41.1.7.1		not-accessible	Table entry for LAN ethernet access list objects.
U32 lanAclRuleKey	1.3.6.1.4.1.5504.2.5.41.1.7.1.1	Unsigned32	not-accessible	Index for the Ethernet Access List table.
OCT lanAclRuleIfName	1.3.6.1.4.1.5504.2.5.41.1.7.1.2	OCTET STRING	read-only	Identify the interface name.
OCT lanAclRuleName	1.3.6.1.4.1.5504.2.5.41.1.7.1.3	OCTET STRING	read-write	The user defined identifier for the rule. When creating a new rule, this field must be provided and must be unique per interface rule.
OCT lanAclRuleSourceIPAddress	1.3.6.1.4.1.5504.2.5.41.1.7.1.4	OCTET STRING	read-write	The Source IP address to filter. The address may include a subnet prefix length in CIDR notation. Therefore the format would be 192.168.2.0/24. This is a ASCII representation of the IP address
LAN lanAclRuleIPProtocol	1.3.6.1.4.1.5504.2.5.41.1.7.1.5	LANEthernetIpProtocolValues	read-write	The IPv4 Protocol to filter.
OCT lanAclRuleSourceMACAddress	1.3.6.1.4.1.5504.2.5.41.1.7.1.6	OCTET STRING	read-write	The Source MAC Address to filter. ASCII representation of the physical address of the interface
OCT lanAclRuleSourceMACMask	1.3.6.1.4.1.5504.2.5.41.1.7.1.7	OCTET STRING	read-write	Mask by which to filter MAC address. For example a MAC Mask of ff:ff:ff:00:00:00 would filter against the first six digits of the MAC address. ASCII representation of the MAC Mask
ZHO lanAclRuleRowStatus	1.3.6.1.4.1.5504.2.5.41.1.7.1.8	ZhoneRowStatus	read-write	The SNMP RowStatus of the current row. The following object must be specified upon row creation: lanAclRuleName
zhnLANDeviceConformance	1.3.6.1.4.1.5504.2.5.41.2
zhnLANDeviceGroups	1.3.6.1.4.1.5504.2.5.41.2.1
zhnLANDeviceGroup	1.3.6.1.4.1.5504.2.5.41.2.1.1			A collection of Zhone LAN Device objects that describe the LAN interfaces of the device.
zhnLANIgmpSnoopingGroup	1.3.6.1.4.1.5504.2.5.41.2.1.2			A collection of Zhone LAN Device objects that describe the IGMP snooping capabilities of the device.
zhnLANHostConfigManagementGroup	1.3.6.1.4.1.5504.2.5.41.2.1.3			A collection of Zhone LAN Host Configuration Management objects that describe the LAN IP addressing of the device.
zhnIpInterfaceGroup	1.3.6.1.4.1.5504.2.5.41.2.1.4			A collection of Zhone LAN IP Address objects that describe the IP connectivity of interfaces of the device.
zhnPPPoEConfigGroup	1.3.6.1.4.1.5504.2.5.41.2.1.5			A collection of Zhone LAN PPPoE objects that describe the configuration of PPPoE connections for interfaces of the device.
zhnPPPoEStatusGroup	1.3.6.1.4.1.5504.2.5.41.2.1.6			A collection of Zhone LAN PPPoE objects that describe the status of PPPoE connections for interfaces of the device.
zhnLANEthernetInterfaceConfigGroup	1.3.6.1.4.1.5504.2.5.41.2.1.7			A collection of Zhone LAN Ethernet objects that describe the ethernet-like interfaces of the device.
zhnLANEthIntfStatisticsGroup	1.3.6.1.4.1.5504.2.5.41.2.1.8			A collection of Zhone LAN Ethernet objects that convey statistical information for the ethernet-like interfaces of the device.
zhnLANEthIntfStatusGroup	1.3.6.1.4.1.5504.2.5.41.2.1.9			A collection of Zhone LAN Ethernet objects that convey the status of the ethernet-like interfaces of the device.
zhnLANEthIntfRateLimitGroup	1.3.6.1.4.1.5504.2.5.41.2.1.10			A collection of Zhone LAN Ethernet objects that convey the rate-limit information of the ethernet-like interfaces of the device.
zhnLANIGMPMulticastGroup	1.3.6.1.4.1.5504.2.5.41.2.1.11			A collection of Zhone LAN IGMP objects that identify the multicast groups currently detected by IGMP snooping within the device.
zhnLANSystemGroup	1.3.6.1.4.1.5504.2.5.41.2.1.12			A collection of Zhone LAN System-wide scalar objects that identify the system default interface.
zhnLANAclRulesGroup	1.3.6.1.4.1.5504.2.5.41.2.1.13			A collection of Zhone LAN Ethernet interface access-list rules with which to filter incoming traffic.
zhnDhcpConditionalServingPoolGroup	1.3.6.1.4.1.5504.2.5.41.2.1.14			A collection of configuration parameters for DHCP conditional serving.
zhnLANDeviceCompliances	1.3.6.1.4.1.5504.2.5.41.2.2
zhnLANDeviceCompliance	1.3.6.1.4.1.5504.2.5.41.2.2.1			The Compliance statement for SNMP entities which manage the Zhone CPE LAN Device Information

RFC description

Manages LAN ethernet interface and IP configuration for Zhone CPE devices.

Start monitoring Zhone Technologies broadband gateways/routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHNLANDEVICE