All MIBs › XYPLEX-CHARACTER1-MIB
Category: Xylogics and Xyplex Terminal Servers
Description: Provides Xyplex extended character port management objects for serial terminal server interfaces.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is XYPLEX-CHARACTER1-MIB?
This Xyplex enterprise MIB supports the company's terminal server/communication server product line, providing extended "character mode" port-management objects for serial terminal interfaces. It models per-port configuration such as terminal type, flow control, and session parameters associated with each async serial port on the terminal server. Its monitoring value is largely in confirming per-port software configuration and session status — whether a given serial port is correctly configured for its attached terminal or modem and whether it is currently in active use — rather than performance counters. It is a proprietary extension alongside the base Xyplex system MIB, with no direct standards-based counterpart. It is deployed on legacy Xyplex terminal servers used for console/dial-in access aggregation in enterprise data centers and campus networks. Network engineers evaluating or troubleshooting this functionality can download the XYPLEX-CHARACTER1-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in XYPLEX-CHARACTER1-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Xyplex terminal server / communication server
Monitoring Examples
No sample objects were available in this MIB source. In general, an administrator would poll the per-port character-mode configuration to confirm terminal type and flow-control settings for a given serial line. Such a check would typically reveal a port misconfigured for the wrong terminal emulation or a flow-control mismatch causing garbled sessions.
What Can Be Monitored
- serial port terminal type configuration
- flow control settings
- per-port session parameters
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| DisplayString |
From XYPLEX-SYSTEM-MIB
| AddressType | |
| DateTime |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| basic | 1.3.6.1.4.1.33.13.1 | |||
| GAU basicActivePorts | 1.3.6.1.4.1.33.13.1.10 | Gauge | read-only | The number of ports with connected sessions or logged in users. Corresponds directly to the value labeled 'Active Ports:' and 'Cur' in the SERVER STATUS display. |
| GAU basicActivePortsHigh | 1.3.6.1.4.1.33.13.1.11 | Gauge | read-only | The highest value of basicActivePorts since system initialization. Corresponds directly to the value labeled 'Active Ports:' and 'High' in the SERVER STATUS display. |
| GAU basicActiveUsers | 1.3.6.1.4.1.33.13.1.12 | Gauge | read-only | The number of logged in users. Corresponds directly to the value labeled 'Active Users:' and 'Cur' in the SERVER STATUS display. |
| GAU basicActiveUsersHigh | 1.3.6.1.4.1.33.13.1.13 | Gauge | read-only | The highest value of basicActiveUsers since system initialization. Corresponds directly to the value labeled 'Active Users:' and 'High' in the SERVER STATUS display. |
| INT basicBroadcast | 1.3.6.1.4.1.33.13.1.1 | INTEGER | read-write | Control for user ability to broadcast messages to other local ports. Corresponds directly to SERVER BROADCAST and the presence of the label 'Broadcast' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. |
| INT basicConsoleLogoutDisconnect | 1.3.6.1.4.1.33.13.1.19 | INTEGER | read-write | Control for automatic session disconnection when a console port user logs out. Corresponds directly to SERVER CONSOLE LOGOUT and the presence of the label 'Console Logout' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. |
| INT basicErrorReport | 1.3.6.1.4.1.33.13.1.2 | INTEGER | read-write | Control for server display of an error when the user gives an unsupported command. Corresponds directly to SERVER REPORT ERRORS and the presence of the label 'Report Errors' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. |
| INT basicInactivityTimer | 1.3.6.1.4.1.33.13.1.4 | INTEGER | read-write | Number of minutes a terminal may remain logged in with no sessions, no input or output, and no modem transitions. Corresponds directly to SERVER INACTIVITY TIMER and the value labeled 'Inactivity Timer:' in the SERVER CHARACTERISTICS display. |
| INT basicLock | 1.3.6.1.4.1.33.13.1.3 | INTEGER | read-write | Control for user ability to use a password to protect a logged in terminal from other users. Corresponds directly to SERVER LOCK and the presence of the label 'Lock' following the label 'Enabled Characteristics:' in the SERVER CHARACTERISTICS display. |
| STR basicLoginPassword | 1.3.6.1.4.1.33.13.1.7 | DisplayString | read-write | The password a user must enter to be given the opportunity to log in. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERVER LOGIN PASSWORD. |
| STR basicLoginPrompt | 1.3.6.1.4.1.33.13.1.8 | DisplayString | read-write | The text string the server displays to prompt a user for the login password. Corresponds directly to SERVER LOGIN PROMPT. |
| INT basicPasswordRetryLimit | 1.3.6.1.4.1.33.13.1.5 | INTEGER | read-write | Number of times the server allows a user to retry an incorrect password. Corresponds directly to SERVER PASSWORD LIMIT and the value labeled 'Password Limit:' in the SERVER CHARACTERISTICS display. |
| STR basicPortActiveUserName | 1.3.6.1.4.1.33.13.1.17.1.26 | DisplayString | read-only | The user name currently logged into the port. Corresponds directly to the value by the port number and labeled 'Username' in the USERS display. |
| INT basicPortAutoConnect | 1.3.6.1.4.1.33.13.1.17.1.7 | INTEGER | read-write | Control for automatic session connection. Corresponds directly to PORT AUTOCONNECT and the presence of the label 'Autoconnect' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortAutoLogin | 1.3.6.1.4.1.33.13.1.17.1.8 | INTEGER | read-write | Control for automatic port login. Corresponds directly to PORT AUTODEDICATED and the presence of the label 'Autodedicated' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortBroadcast | 1.3.6.1.4.1.33.13.1.17.1.9 | INTEGER | read-write | Control for display of messages sent by users on other ports. Corresponds directly to PORT BROADCAST and the presence of the label 'Broadcast' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortConnectResume | 1.3.6.1.4.1.33.13.1.17.1.10 | INTEGER | read-write | Control for behavior of a connection attempt to a destination where the port already has a connection. 'disabled' causes a new connection. 'enabled' causes the existing connection to become the active connection. Corresponds directly to PORT CONNECTRESUME and the presence of the label 'Connectresume' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortDefaultDestAction | 1.3.6.1.4.1.33.13.1.17.1.2 | INTEGER | read-write | The action to take relative to basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. |
| STR basicPortDefaultDestLATNodeName | 1.3.6.1.4.1.33.13.1.17.1.5 | DisplayString | read-write | A LAT node name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. This object can have a non- zero-length value only if the value of basicPortDefaultDestProtocol is 'lat'. |
| STR basicPortDefaultDestLATPortName | 1.3.6.1.4.1.33.13.1.17.1.6 | DisplayString | read-write | A LAT port name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the value labeled 'Node:' following the label 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. this object can hav a non-zero-length value only if the value if basicPortDefaultDestProtocol is 'lat' |
| STR basicPortDefaultDestName | 1.3.6.1.4.1.33.13.1.17.1.4 | DisplayString | read-write | The default name to use in forming a connection when no other name is specified. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the value labeled 'Dedicated/Preferred Service:' in the PORT CHARACTERISTICS display. If the value of basicPortDefaultDestProtocol is 'telnet', an Internet port number may be included on the end of the name, delimited with a colon (':'). If the value of basicPortDefaultDestProtocol is not 'telnet', then the maximum length is 16. |
| INT basicPortDefaultDestProtocol | 1.3.6.1.4.1.33.13.1.17.1.3 | INTEGER | read-write | The session protocol to use with basicPortDefaultDestName. Corresponds directly to LAT/TELNET PORT DEDICATED/PREFERRED SERVICE. |
| INT basicPortDefaultProtocol | 1.3.6.1.4.1.33.13.1.17.1.19 | INTEGER | read-write | The session protocol to use when not otherwise specified. Corresponds directly to PORT RESOLVE SERVICE and the value labeled 'Resolve Service:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicPortDefaultSessionMode | 1.3.6.1.4.1.33.13.1.17.1.27 | INTEGER | read-write | Data recognition mode when starting a session, with the following meanings: interactive locally recognize all controls binary recognize only session protocol (corresponds to PASSALL) binaryWithFlow recognize only XON and XOFF (corresponds to PASTHRU transparent recognize no data Corresponds directly to PORT DEFAULT SESSION MODE and the value labeled 'Default Session Mode:' in the PORT ALTERNATE CHARACTERISTICS display. |
| STR basicPortDefaultUserName | 1.3.6.1.4.1.33.13.1.17.1.17 | DisplayString | read-write | Default user name to use for automatically logging in the port. Corresponds directly to PORT USERNAME and the value labeled 'Port n:' in the PORT CHARACTERISTICS display. |
| INT basicPortDialup | 1.3.6.1.4.1.33.13.1.17.1.11 | INTEGER | read-write | Defines whether the port should be considered as connected to a dialup line. 'enabled' means that it is. Corresponds directly to PORT DIALUP and the presence of the label 'Dial Up' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| basicPortEntry | 1.3.6.1.4.1.33.13.1.17.1 | not-accessible | Basic parameter values for a port. | |
| INT basicPortIdleTimeout | 1.3.6.1.4.1.33.13.1.17.1.12 | INTEGER | read-write | The number of minutes the system will allow a session to have no activity before automatically disconnecting it. A value of -1 indicates no timeout. Zero is not a valid value. Corresponds directly to PORT IDLE TIMEOUT and the value labeled 'Idle Timeout:' in the PORT ALTERNATE CHARACTERISTICS display. |
| CTR basicPortIdleTimeouts | 1.3.6.1.4.1.33.13.1.17.1.22 | Counter | read-only | The number of session disconnects due to expiration of basicPortIdleTimeout. Corresponds directly to the value labeled 'Idle Timeouts:' in the PORT COUNTERS display. |
| INT basicPortInactivityLogout | 1.3.6.1.4.1.33.13.1.17.1.13 | INTEGER | read-write | Control for the system automatically logging the port out when it has no sessions, no local activity, and no modem signal changes for the time period specified by basicInactivityTimer. Corresponds directly to PORT INACTIVITY LOGOUT and the presence of the label 'Inactivity Logout' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortIndex | 1.3.6.1.4.1.33.13.1.17.1.1 | INTEGER | read-only | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. |
| INT basicPortLastInCharacter | 1.3.6.1.4.1.33.13.1.17.1.24 | INTEGER | read-only | The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT STATUS display. |
| INT basicPortLastOutCharacter | 1.3.6.1.4.1.33.13.1.17.1.25 | INTEGER | read-only | The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT STATUS display. |
| CTR basicPortLogins | 1.3.6.1.4.1.33.13.1.17.1.20 | Counter | read-only | The number of logins on the port since system initialization. Corresponds directly to the value labeled 'Local Accesses:' in the PORT COUNTERS display. |
| INT basicPortLossNotification | 1.3.6.1.4.1.33.13.1.17.1.14 | INTEGER | read-write | Control for the system sending a Bell character to the port when it looses an input character due to an overrun or data error. Corresponds directly to PORT LOSS NOTIFICATION and the presence of the label 'Loss Notification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortMessageCodes | 1.3.6.1.4.1.33.13.1.17.1.15 | INTEGER | read-write | Control for including error numbers in error messages displayed on the port. Corresponds directly to PORT MESSAGE CODES and the presence of the label 'Message Codes' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortMultisessions | 1.3.6.1.4.1.33.13.1.17.1.16 | INTEGER | read-write | Control for running the multisession line protocol between the port and the locally-connected terminal. Corresponds directly to PORT MULTISESSIONS and the presence of the label 'Multisessions' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| CTR basicPortRemoteSessions | 1.3.6.1.4.1.33.13.1.17.1.21 | Counter | read-only | The number of remotely originating sessions to the port since system initialization. Corresponds directly to the value labeled 'Remote Accesses:' in the PORT COUNTERS display. |
| INT basicPortStatus | 1.3.6.1.4.1.33.13.1.17.1.23 | INTEGER | read-only | The current operational status of the port. Corresponds directly to the value labeled 'Status:' in the PORT STATUS display. |
| basicPortTable | 1.3.6.1.4.1.33.13.1.17 | not-accessible | A list of basic character port entries. | |
| INT basicPortVerification | 1.3.6.1.4.1.33.13.1.17.1.18 | INTEGER | read-write | Control for display of informational messages on the port when the user connects, disconnects, or switches a session. Corresponds directly to PORT VERIFICATION and the presence of the label 'Verification' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicPortZero | 1.3.6.1.4.1.33.13.1.17.1.28 | INTEGER | read-write | Control to zero counters for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for this value. Setting the value to 'ready' has no effect. Setting it to 'execute' causes the port's counters to be zeroed. Corresponds to the ZERO PORT command. |
| TIK basicPortZeroTime | 1.3.6.1.4.1.33.13.1.17.1.29 | TimeTicks | read-only | The number of hundredths of a second since the most recent zeroing of the port's counters, such as through execution of basicPortZero. Corresponds directly to the value labeled 'Seconds Since Zeroed:' in the PORT COUNTERS display. |
| STR basicPrivilegedPassword | 1.3.6.1.4.1.33.13.1.6 | DisplayString | read-write | The password a user must enter to become privileged. For security reasons, reading this object always returns a zero-length value. Corresponds directly to SERVER PRIVILEGED PASSWORD. |
| INT basicSerialPortBackwardSwitch | 1.3.6.1.4.1.33.13.1.18.1.9 | INTEGER | read-write | Character input from the character port to cause a switch to the previous, lower numbered session. The value 0 indicates no character has this effect. Corresponds directly to PORT BACKWARD SWITCH and the value labeled 'Backwards Switch:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortBreak | 1.3.6.1.4.1.33.13.1.18.1.2 | INTEGER | read-write | Action to take on a BREAK condition from the port. Corresponds directly to PORT BREAK and the value labeled 'Break:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortDCDTimeout | 1.3.6.1.4.1.33.13.1.18.1.16 | INTEGER | read-write | The number of milleseconds that DCD may be asserted before disconnecting the port. Corresponds directly to PORT DCD TIMEOUT and the value labeled 'DCD Timeout:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortDSRLogout | 1.3.6.1.4.1.33.13.1.18.1.14 | INTEGER | read-write | Control for logging out the port when DCD is deasserted. Corresponds directly to PORT DSRLOGOUT and the presence of the label 'DSRlogout' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortDSRObserve | 1.3.6.1.4.1.33.13.1.18.1.15 | INTEGER | read-write | Control for beginning the login sequence on the port when DCD is asserted. Corresponds directly to PORT DSRWAIT and the presence of the label 'DSRwait' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortDTRAssert | 1.3.6.1.4.1.33.13.1.18.1.17 | INTEGER | read-write | Control when the system asserts DTR on the port. always unconditional(DISABLED) onConnectionOrRing connection formed or RING asserted(ENABLED) onConnection connection formed (FORCONNECTION) onRing RING asserted (FORRING) Corresponds directly to PORT DTRWAIT and the value labeled 'DTR Wait:' in the PORT ALTERNATE CHARACTERISTICS display. |
| basicSerialPortEntry | 1.3.6.1.4.1.33.13.1.18.1 | not-accessible | Basic parameter values for a serial port. | |
| INT basicSerialPortForwardSwitch | 1.3.6.1.4.1.33.13.1.18.1.10 | INTEGER | read-write | Character input from the character port to cause a switch to the next, higher numbered session. The value 0 indicates no character has this effect. Corresponds directly to PORT FORWARD SWITCH and the value labeled 'Forwards Switch:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortIndex | 1.3.6.1.4.1.33.13.1.18.1.1 | INTEGER | read-only | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. |
| INT basicSerialPortInterrupts | 1.3.6.1.4.1.33.13.1.18.1.3 | INTEGER | read-write | Control for recognizing BREAK or local switch to interrupt a session. Corresponds directly to PORT INTERRUPTS and the presence of the label 'Interrupts' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortLimitedCommands | 1.3.6.1.4.1.33.13.1.18.1.18 | INTEGER | read-write | Control for limiting the commands available to the user on the port. Corresponds directly to PORT SECURITY and the presence of the label 'Security' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortLimitedView | 1.3.6.1.4.1.33.13.1.18.1.19 | INTEGER | read-write | Control for restricting what a user may display. Corresponds directly to PORT LIMITED VIEW and the presence of the label 'Limited View' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortLineEditor | 1.3.6.1.4.1.33.13.1.18.1.21 | INTEGER | read-write | Control for allowing the user to use local mode command line editing. Corresponds directly to PORT LINE EDITOR and the presence of the label 'Line Editor' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortLineEditorBackspace | 1.3.6.1.4.1.33.13.1.18.1.22 | INTEGER | read-write | Character input from the character port to move the cursor to the left. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR BACKSPACE and the value labeled 'Backspace Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorBeginning | 1.3.6.1.4.1.33.13.1.18.1.23 | INTEGER | read-write | Character input from the character port to move the cursor to the beginning of the line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR BEGINNING and the value labeled 'Begin Line Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorCancel | 1.3.6.1.4.1.33.13.1.18.1.24 | INTEGER | read-write | Character input from the character port to cancel an interactive dialog or delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR CANCEL and the value labeled 'Cancel Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorDeleteBeginning | 1.3.6.1.4.1.33.13.1.18.1.25 | INTEGER | read-write | Character input from the character port to delete the current line from the cursor to the beginning. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR DELETE BEGINNING and the value labeled 'Delete Begin Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorDeleteLine | 1.3.6.1.4.1.33.13.1.18.1.26 | INTEGER | read-write | Character input from the character port to delete the current line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR DELETE LINE and the value labeled 'Delete Line Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorEnd | 1.3.6.1.4.1.33.13.1.18.1.27 | INTEGER | read-write | Character input from the character port to move the cursor to the end of the line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR END and the value labeled 'End of Line Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorForward | 1.3.6.1.4.1.33.13.1.18.1.28 | INTEGER | read-write | Character input from the character port to move the cursor to the right. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR FORWARDS and the value labeled 'Forwards Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorInsertToggle | 1.3.6.1.4.1.33.13.1.18.1.29 | INTEGER | read-write | Character input from the character port to toggle between insert and overwrite modes. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR INSERT TOGGLE and the value labeled 'Insert Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorNextLine | 1.3.6.1.4.1.33.13.1.18.1.30 | INTEGER | read-write | Character input from the character port to recall the next, newer line in the command history. The value -1 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR NEXT LINE and the value labeled 'Next Line Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorPreviousLine | 1.3.6.1.4.1.33.13.1.18.1.31 | INTEGER | read-write | Character input from the character port to recall the previous, older line in the command history. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR PREVIOUS LINE and the value labeled 'Previous Line Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorQuotingCharacter | 1.3.6.1.4.1.33.13.1.18.1.32 | INTEGER | read-write | Character input from the character port to inhibit interpretation of the next input character. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR QUOTING CHARACTER and the value labeled 'Quoting Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLineEditorRedisplay | 1.3.6.1.4.1.33.13.1.18.1.33 | INTEGER | read-write | Character input from the character port to redisplay the current command line. The value 0 indicates no character has this effect. Corresponds directly to PORT LINE EDITOR REDISPLAY CHARACTER and the value labeled 'Redisplay Character:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortLocalSwitch | 1.3.6.1.4.1.33.13.1.18.1.11 | INTEGER | read-write | Character input from the character port to cause a switch to local command mode. The value 0 indicates no character has this effect. Corresponds directly to PORT LOCAL SWITCH and the value labeled 'Local Switch:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortModemControl | 1.3.6.1.4.1.33.13.1.18.1.12 | INTEGER | read-write | Control for observing hardware modem control signals. Corresponds directly to PORT MODEM CONTROL and the value labeled 'Modem Control:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortNoLoss | 1.3.6.1.4.1.33.13.1.18.1.4 | INTEGER | read-write | Control for storing port input locally in anticipation of session startup. Corresponds directly to PORT NOLOSS and the presence of the label 'Noloss' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortPassword | 1.3.6.1.4.1.33.13.1.18.1.20 | INTEGER | read-write | Control for requiring the user to supply the login password to log in on the port. Corresponds directly to PORT PASSWORD and the presence of the label 'Password' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortPause | 1.3.6.1.4.1.33.13.1.18.1.5 | INTEGER | read-write | Control for pausing after each screenful of locally-originated output to the port. Corresponds directly to PORT PAUSE and the presence of the label 'Pause' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| STR basicSerialPortPrompt | 1.3.6.1.4.1.33.13.1.18.1.6 | DisplayString | read-write | Prompt for the system to use on the port. Corresponds directly to PORT PROMPT and the value labeled 'Prompt:' in the PORT ALTERNATE CHARACTERISTICS display. |
| INT basicSerialPortSignalCheck | 1.3.6.1.4.1.33.13.1.18.1.13 | INTEGER | read-write | Control for observing DSR and DCD to bound allowing sessions. Corresponds directly to PORT SIGNAL CHECK and the presence of the label 'Signal Check' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| basicSerialPortTable | 1.3.6.1.4.1.33.13.1.18 | not-accessible | A list of basic character serial port entries. | |
| INT basicSerialPortTerminalType | 1.3.6.1.4.1.33.13.1.18.1.7 | INTEGER | read-write | Type of terminal attached to the port, for formatting local output. Corresponds directly to PORT TYPE and the value labeled 'Type:' in the PORT CHARACTERISTICS display. |
| INT basicSerialPortTypeaheadLimit | 1.3.6.1.4.1.33.13.1.18.1.8 | INTEGER | read-write | Maximum number of input characters to hold pending tranmission on a session. Corresponds directly to PORT TYPEAHEAD SIZE and the value labeled 'Typeahead Size:' in the PORT ALTERNATE CHARACTERISTICS display. |
| GAU basicSessions | 1.3.6.1.4.1.33.13.1.14 | Gauge | read-only | The total number of connected sessions. Corresponds directly to the value labeled 'Connected Sessions:' and 'Cur' in the SERVER STATUS display. |
| GAU basicSessionsHigh | 1.3.6.1.4.1.33.13.1.15 | Gauge | read-only | The highest value of basicSessions since system initialization. Corresponds directly to the value labeled 'Connected Sessions:' and 'High' in the SERVER STATUS display. |
| INT basicSessionsLimit | 1.3.6.1.4.1.33.13.1.16 | INTEGER | read-write | The maximum total number of sessions that can simultaneously be connected to the system. A value of -1 indicates no limit up to available dynamic system memory. Corresponds directly to SERVER SESSION LIMIT and the value labeled 'Connected Sessions:' and 'Max' in the SERVER STATUS display. |
| STR basicWelcome | 1.3.6.1.4.1.33.13.1.9 | DisplayString | read-write | The text string the server displays before attempting to log in a user. Corresponds directly to SERVER WELCOME and the value labeled 'Welcome:' in the SERVER CHARACTERISTICS display. |
| character | 1.3.6.1.4.1.33.13 | |||
| characterDep | 1.3.6.1.4.1.33.2 | |||
| dial | 1.3.6.1.4.1.33.13.5 | |||
| INT dialPortDialback | 1.3.6.1.4.1.33.13.5.1.1.2 | INTEGER | read-write | Control for use of dialback when a user logs in on the port. Corresponds directly to PORT DIALBACK and the presence of the label 'Dialback' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT dialPortDialbackTimeout | 1.3.6.1.4.1.33.13.5.1.1.3 | INTEGER | read-write | The number of seconds to wait for remote modem response when dialing back. Corresponds directly to PORT DIALBACK TIMEOUT and the value labeled 'Dialback Timeout:' in the PORT ALTERNATE CHARACTERISTICS display. |
| dialPortEntry | 1.3.6.1.4.1.33.13.5.1.1 | not-accessible | Dial parameter values for a port. | |
| INT dialPortIndex | 1.3.6.1.4.1.33.13.5.1.1.1 | INTEGER | read-only | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. |
| dialPortTable | 1.3.6.1.4.1.33.13.5.1 | not-accessible | A list of dial character port entries. | |
| menu | 1.3.6.1.4.1.33.13.3 | |||
| STR menuCommand | 1.3.6.1.4.1.33.13.3.4.1.4 | DisplayString | read-only | The commands to execute when the user chooses the menu entry. Corresponds directly second line following the entry number in the SERVER MENU display. |
| STR menuContinuePrompt | 1.3.6.1.4.1.33.13.3.2 | DisplayString | read-write | The text to use when prompting a menu user to press RETURN to continue. Corresponds directly to SERVER MENU CONTINUE PROMPT and the value labeled 'Menu Continue Prompt:' in the SERVER MENU display. |
| menuEntry | 1.3.6.1.4.1.33.13.3.4.1 | not-accessible | Parameter values for a menu entry. | |
| INT menuIndex | 1.3.6.1.4.1.33.13.3.4.1.1 | INTEGER | read-only | The index number of a menu entry. Corresponds directly to the numbers down the left of the SERVER MENU display. |
| GAU menuNumber | 1.3.6.1.4.1.33.13.3.1 | Gauge | read-only | The number of entries in the Menu table. Corresponds indirectly to SERVER MENU display. |
| menuPortEntry | 1.3.6.1.4.1.33.13.3.5.1 | not-accessible | Menu parameter values for a port. | |
| INT menuPortIndex | 1.3.6.1.4.1.33.13.3.5.1.1 | INTEGER | read-only | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. |
| INT menuPortMenuStatus | 1.3.6.1.4.1.33.13.3.5.1.2 | INTEGER | read-write | Control for menu operation on the port. Corresponds indirectly to PORT MENU and PORT PRIVILEGED MENU and the presence of the labels 'Menu' and 'Privileged Men' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| menuPortTable | 1.3.6.1.4.1.33.13.3.5 | not-accessible | A list of menu-related character port entries. | |
| STR menuSelectionPrompt | 1.3.6.1.4.1.33.13.3.3 | DisplayString | read-write | The text to use when prompting a menu user for a menu selection. Corresponds directly to SERVER MENU PROMPT and the value labeled 'Menu Prompt:' in the SERVER MENU display. |
| INT menuStatus | 1.3.6.1.4.1.33.13.3.4.1.2 | INTEGER | read-write | The status of a the entry. Set to 'invalid' to remove the entry, which corresponds directly to the CLEAR SERVER MENU command. Actual removal of the entry is implementation specific. |
| menuTable | 1.3.6.1.4.1.33.13.3.4 | not-accessible | A list of menu entries. | |
| STR menuText | 1.3.6.1.4.1.33.13.3.4.1.3 | DisplayString | read-only | The text to be displayed in the menu. Corresponds directly to the line next to the entry number in the SERVER MENU display. |
| netLogin | 1.3.6.1.4.1.33.13.4 | |||
| INT netLoginNumber | 1.3.6.1.4.1.33.13.4.1 | INTEGER | read-only | The number of entries in the Network Login Server table. |
| netLoginPortEntry | 1.3.6.1.4.1.33.13.4.3.1 | not-accessible | Network login parameter values for a port. | |
| INT netLoginPortIndex | 1.3.6.1.4.1.33.13.4.3.1.1 | INTEGER | read-only | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. |
| OCT netLoginPortLoaderAddress | 1.3.6.1.4.1.33.13.4.3.1.5 | OCTET STRING | read-only | The network address of the server that provided the script for the current port login. Corresponds directly the address part of the value labeled 'Script Loaded From:' in the PORT STATUS display. |
| ADR netLoginPortLoaderAddressType | 1.3.6.1.4.1.33.13.4.3.1.4 | AddressType | read-only | The type of network address contained in netLoginPortLoaderAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. Corresponds indirectly to the address part of the value labeled 'Script Loaded From:' in the PORT STATUS display. |
| STR netLoginPortLoaderFile | 1.3.6.1.4.1.33.13.4.3.1.6 | DisplayString | read-only | The path and file name of the script used for the current port login. Corresponds directly the file name part of the value labeled 'Script Loaded From:' in the PORT STATUS display. |
| INT netLoginPortScriptEcho | 1.3.6.1.4.1.33.13.4.3.1.3 | INTEGER | read-write | Control for display of script operation on the port when running a script. Corresponds directly to PORT SCRIPT ECHO and the presence of the label 'Script Echo' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| INT netLoginPortScriptUse | 1.3.6.1.4.1.33.13.4.3.1.2 | INTEGER | read-write | Control for the script action taken when a user logs in on the port. Corresponds directly to PORT SCRIPT LOGIN and the value labeled 'Script Login:' in the PORT ALTERNATE CHARACTERISTICS display. |
| netLoginPortTable | 1.3.6.1.4.1.33.13.4.3 | not-accessible | A list of network login character port entries. | |
| netLoginServerEntry | 1.3.6.1.4.1.33.13.4.2.1 | not-accessible | Network login parameter values for a server entry. | |
| STR netLoginServerName | 1.3.6.1.4.1.33.13.4.2.1.1 | DisplayString | read-write | The name of a network login server, suitable for resolution to a network address. Corresponds directly to host portion of SERVER SCRIPT SERVER and the value labeled 'Script Host' in the SERVER PARAMETER SERVER display. |
| STR netLoginServerPath | 1.3.6.1.4.1.33.13.4.2.1.3 | DisplayString | read-write | The full path name to the script file that is identified by the user name. Corresponds directly to path portion of SERVER SCRIPT SERVER and the value labeled 'Script Path' in the SERVER PARAMETER SERVER display. |
| INT netLoginServerStatus | 1.3.6.1.4.1.33.13.4.2.1.2 | INTEGER | read-write | Status of this entry. Set to 'invalid'to remove the entry, which corresponds directly to the CLEAR SERVER SCRIPT SERVER command. Acutal removal of the entry is implementation specific. |
| netLoginServerTable | 1.3.6.1.4.1.33.13.4.2 | not-accessible | A list of network login server entries. | |
| queue | 1.3.6.1.4.1.33.13.2 | |||
| queueEntry | 1.3.6.1.4.1.33.13.2.4.1 | not-accessible | Parameter values for a queue entry. | |
| GAU queueHigh | 1.3.6.1.4.1.33.13.2.2 | Gauge | read-only | The highest value of queueNumber since system initialization. Corresponds directly to the value labeled 'Queue Entries' and 'High' in the SERVER STATUS display. |
| INT queueJob | 1.3.6.1.4.1.33.13.2.4.1.1 | INTEGER | read-only | The job number of a queued request. Corresponds directly to the value labeled 'Entry' in the QUEUE display. |
| INT queueLimit | 1.3.6.1.4.1.33.13.2.1 | INTEGER | read-write | The maximum number of entries that can be made in the Queue table. The value -1 indicates the imit is available memory. Corresponds directly to SERVER QUEUE LIMIT and the value labeled 'Queue Limit:' in the SERVER CHARACTERISTICS display. |
| GAU queueNumber | 1.3.6.1.4.1.33.13.2.3 | Gauge | read-only | The number of entries in the Queue table. Corresponds directly to the value labeled 'Queue Entries' and 'Cur' in the SERVER STATUS display. |
| queuePortEntry | 1.3.6.1.4.1.33.13.2.5.1 | not-accessible | Queuing parameter values for a port. | |
| INT queuePortIndex | 1.3.6.1.4.1.33.13.2.5.1.1 | INTEGER | read-only | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. |
| INT queuePortQueuing | 1.3.6.1.4.1.33.13.2.5.1.2 | INTEGER | read-write | Control for allowing queued requests for using the port. Corresponds directly to PORT QUEUING and the presence of the label 'Queuing' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. |
| queuePortTable | 1.3.6.1.4.1.33.13.2.5 | not-accessible | A list of queuing-related character port entries. | |
| STR queueServiceName | 1.3.6.1.4.1.33.13.2.4.1.4 | DisplayString | read-only | The name of the service for which the originator is waiting. Corresponds directly to the value labeled 'Service' in the QUEUE display. |
| INT queueServicePortIndex | 1.3.6.1.4.1.33.13.2.4.1.5 | INTEGER | read-only | The charPortIndex of the port for which the originator is waiting, if supplied by the originator. As defined in the Character MIB [12]. Corresponds indirectly to the port number part of the value labeled 'Port Name' in the QUEUE display. |
| STR queueServicePortName | 1.3.6.1.4.1.33.13.2.4.1.6 | DisplayString | read-only | The name of the port for which the originator is waiting, if supplied by the originator. Corresponds directly to the port name part of the value labeled 'Port Name' in the SERVER QUEUE display. |
| STR queueSourceName | 1.3.6.1.4.1.33.13.2.4.1.3 | DisplayString | read-only | The name of the system that originated the queue entry. Corresponds directly to the value labeled 'Source Node' in the QUEUE display. |
| INT queueStatus | 1.3.6.1.4.1.33.13.2.4.1.2 | INTEGER | read-write | The status of a queue entry. Set to 'invalid' to remove the entry, which corresponds directly to the REMOVE QUEUE ENTRY command. Actual removal of the entry is implementation specific. |
| queueTable | 1.3.6.1.4.1.33.13.2.4 | not-accessible | A list of queue entries. | |
| sessionLog | 1.3.6.1.4.1.33.13.6 | |||
| INT sessionLogConnectionID | 1.3.6.1.4.1.33.13.6.2.1.2 | INTEGER | read-only | An indentifying number for records relating to the same connection, that is, the connect and disconnect records, either of which can be missing. Corresponds directly to value labeled 'Entry' the SERVER ACCOUNTING display. |
| DAT sessionLogConnectTime | 1.3.6.1.4.1.33.13.6.2.1.8 | DateTime | read-only | The date and time that session connection occurred. Corresponds directly to the value labeled 'Connect Time' in the SERVER ACCOUNTING display. |
| DAT sessionLogDisconnectTime | 1.3.6.1.4.1.33.13.6.2.1.9 | DateTime | read-only | The date and time that session disconnection occurred. Corresponds directly to the value labeled 'Disconnect Time' in the SERVER ACCOUNTING display. |
| sessionLogEntry | 1.3.6.1.4.1.33.13.6.2.1 | not-accessible | Parameter values for a session log entry. | |
| INT sessionLogEvent | 1.3.6.1.4.1.33.13.6.2.1.4 | INTEGER | read-only | The type of event. Corresponds directly to the alphabetic part of the value labeled 'Type' in the SERVER ACCOUNTING display. |
| INT sessionLogEventDetail | 1.3.6.1.4.1.33.13.6.2.1.5 | INTEGER | read-only | The detailed reason for the event. Corresponds directly to the numeric part of the value labeled 'Type' in the SERVER ACCOUNTING display. |
| CTR sessionLogInCharacters | 1.3.6.1.4.1.33.13.6.2.1.10 | Counter | read-only | The number of characters that came into the port for the session. Corresponds directly to the value labeled 'Bytes In' in the SERVER ACCOUNTING display. |
| INT sessionLogIndex | 1.3.6.1.4.1.33.13.6.2.1.1 | INTEGER | read-only | The index number of a session log entry. Corresponds directly to the order of the displayed records in the SERVER ACCOUNTING display. The maximum value is sessionLogLimit. |
| INT sessionLogLimit | 1.3.6.1.4.1.33.13.6.1 | INTEGER | read-write | The maximum number of entries allowed in the Session Log table. Corresponds directly to SERVER ACCOUNTING ENTRIES and the value labeled 'Accounting Entries:' in the SERVER CHARACTERISTICS display. |
| CTR sessionLogOutCharacters | 1.3.6.1.4.1.33.13.6.2.1.11 | Counter | read-only | The number of characters that went out of the port for the session. Corresponds directly to the value labeled 'Bytes Out' in the SERVER ACCOUNTING display. |
| INT sessionLogPort | 1.3.6.1.4.1.33.13.6.2.1.3 | INTEGER | read-only | An index value that uniquely identifies the port where the event took place. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Character MIB [12]. Corresponds directly to the value labeled 'Port' in the SERVER ACCOUNTING display. |
| STR sessionLogRemoteName | 1.3.6.1.4.1.33.13.6.2.1.7 | DisplayString | read-only | The name of the session remote partner. Corresponds directly to the value labeled 'Destination' in the SERVER ACCOUNTING display. |
| sessionLogTable | 1.3.6.1.4.1.33.13.6.2 | not-accessible | A list of session log entries. | |
| STR sessionLogUserName | 1.3.6.1.4.1.33.13.6.2.1.6 | DisplayString | read-only | The user name logged in on the port when the event occurred. Corresponds directly to the value labeled 'Username' in the SERVER ACCOUNTING display. |
| xyplex | 1.3.6.1.4.1.33 |
RFC description
Manages asynchronous character-mode terminal server functions on legacy Xyplex terminal servers.
Start monitoring Xyplex terminal server / communication server (per-port terminal-type/flow-control/session config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.