XYPLEX-IPX-MIB

All MIBs › XYPLEX-IPX-MIB

Category: Xylogics and Xyplex Terminal Servers

Description: Manages Xyplex IPX protocol routing, service advertisement table, and Novell NetWare connectivity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XYPLEX-IPX-MIB?

XYPLEX-IPX-MIB is a Xyplex enterprise MIB for managing Novell IPX protocol routing on Xyplex networking equipment, in an era when IPX/NetWare connectivity was common in enterprise LANs. It exposes IPX routing configuration and a service advertisement (SAP) table used to track available NetWare services reachable through the device. Its monitoring value is mostly software/protocol-state focused: administrators poll the SAP table to confirm expected NetWare servers and services are being advertised and reachable, and check IPX routing state to detect routing flaps or lost connectivity to NetWare segments. It depends conceptually on the Novell IPX/SAP protocol specifications rather than an IETF standard. It is deployed on Xyplex devices in legacy enterprise networks that still carried Novell NetWare/IPX traffic alongside IP. Network engineers evaluating or troubleshooting this functionality can download the XYPLEX-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XYPLEX-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xyplex networking equipment (legacy IPX/NetWare environments)

Monitoring Examples

An operator would poll the IPX service advertisement table to confirm that expected NetWare file/print servers are still being advertised and reachable through the device. A NetWare service disappearing from the SAP table without an administrative change would indicate a lost route or a failed server, prompting investigation. Because no sample objects were captured for this MIB, exact object/table names cannot be confirmed beyond what the short description indicates.

What Can Be Monitored

IPX routing table state
advertised NetWare services (SAP table)
IPX connectivity status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ipx	1.3.6.1.4.1.33.15
ipxIf	1.3.6.1.4.1.33.15.2
ipxIfEntry	1.3.6.1.4.1.33.15.2.1.1		not-accessible	IPX interface parameters and counters.
CTR ipxIfErrors	1.3.6.1.4.1.33.15.2.1.1.7	Counter	read-only	The number of IPX errors seen on this interface.
CTR ipxIfFramesIn	1.3.6.1.4.1.33.15.2.1.1.5	Counter	read-only	The number of IPX frames received on this interface.
CTR ipxIfFramesOut	1.3.6.1.4.1.33.15.2.1.1.6	Counter	read-only	The number of IPX frames sent on this interface.
INT ipxIfFrameStyle	1.3.6.1.4.1.33.15.2.1.1.4	INTEGER	read-write	Control for the CSMA/CD frame style to use on this interface.
INT ipxIfIndex	1.3.6.1.4.1.33.15.2.1.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
INT ipxIfNetbiosForwarding	1.3.6.1.4.1.33.15.3.2.1.2	INTEGER	read-write	Control whether Netbios packet will be forwarded in or out on this interface.
CTR ipxIfNetbiosIn	1.3.6.1.4.1.33.15.3.2.1.3	Counter	read-only	The number of IPX Netbios frames received on this interface.
CTR ipxIfNetbiosOut	1.3.6.1.4.1.33.15.3.2.1.4	Counter	read-only	The number of IPX Netbios frames sent on this interface.
INT ipxIfNetwork	1.3.6.1.4.1.33.15.2.1.1.3	INTEGER	read-write	The IPX network number of the network to which this interface is attached.
CTR ipxIfRipAgedOut	1.3.6.1.4.1.33.15.4.1.1.7	Counter	read-only	The number of entries timed out and discarded on this interface.
INT ipxIfRipBcst	1.3.6.1.4.1.33.15.4.1.1.2	INTEGER	read-write	Control whether RIP packets will be broadcasted out this interface.
INT ipxIfRipBcstDiscardTimeout	1.3.6.1.4.1.33.15.4.1.1.3	INTEGER	read-write	The number of seconds to wait before discarding information learned from a RIP broadcast.
INT ipxIfRipBcstTimer	1.3.6.1.4.1.33.15.4.1.1.4	INTEGER	read-write	The number of seconds to wait between sending out RIP broadcasts.
CTR ipxIfRipIn	1.3.6.1.4.1.33.15.4.1.1.5	Counter	read-only	The number of RIP broadcasts received on this interface.
CTR ipxIfRipOut	1.3.6.1.4.1.33.15.4.1.1.6	Counter	read-only	The number of RIP broadcasts sent on this interface.
CTR ipxIfSapAgedOut	1.3.6.1.4.1.33.15.5.1.1.7	Counter	read-only	The number entries for this interface discarded due to aging timeout.
INT ipxIfSapBcst	1.3.6.1.4.1.33.15.5.1.1.2	INTEGER	read-write	Control whether SAP packets will be broadcasted out this interface.
INT ipxIfSapBcstDiscardTimeout	1.3.6.1.4.1.33.15.5.1.1.3	INTEGER	read-write	The number of seconds to wait before discarding information learned from a SAP broadcast.
INT ipxIfSapBcstTimer	1.3.6.1.4.1.33.15.5.1.1.4	INTEGER	read-write	The number of seconds to wait between sending out SAP broadcasts.
CTR ipxIfSapIn	1.3.6.1.4.1.33.15.5.1.1.5	Counter	read-only	The number SAP broadcasts received on this interface.
CTR ipxIfSapOut	1.3.6.1.4.1.33.15.5.1.1.6	Counter	read-only	The number SAP broadcasts sent on this interface.
INT ipxIfState	1.3.6.1.4.1.33.15.2.1.1.2	INTEGER	read-write	Control for IPX routing services for this interface.
ipxIfTable	1.3.6.1.4.1.33.15.2.1		not-accessible	A list of IPX interface entries.
INT ipxIfTransitDelay	1.3.6.1.4.1.33.15.2.1.1.8	INTEGER	read-write	The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface. A value of 0 means that the system will calculate this value based on the measured speed of the interface.
INT ipxIfTransitDelayActual	1.3.6.1.4.1.33.15.2.1.1.9	INTEGER	read-only	The number of 55 millisecond ticks it takes for a packet to travel from one destination to another on the interface.
ipxNetbios	1.3.6.1.4.1.33.15.3
INT ipxNetbiosHopLimit	1.3.6.1.4.1.33.15.3.1	INTEGER	read-write	Maximum number of hops that an IPX Netbios packet may make.
ipxNetbiosIfEntry	1.3.6.1.4.1.33.15.3.2.1		not-accessible	IPX interface parameters and counters.
INT ipxNetbiosIfIndex	1.3.6.1.4.1.33.15.3.2.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipxNetbiosIfTable	1.3.6.1.4.1.33.15.3.2		not-accessible	A list of IPX interface entries.
ipxRip	1.3.6.1.4.1.33.15.4
INT ipxRipAge	1.3.6.1.4.1.33.15.4.2.1.6	INTEGER	read-only	The age of the RIP entry in seconds.
ipxRipEntry	1.3.6.1.4.1.33.15.4.2.1		not-accessible	IPX interface parameters and counters.
INT ipxRipHops	1.3.6.1.4.1.33.15.4.2.1.4	INTEGER	read-only	The number of hops to reach the router.
ipxRipIfEntry	1.3.6.1.4.1.33.15.4.1.1		not-accessible	IPX interface parameters and counters.
INT ipxRipIfIndex	1.3.6.1.4.1.33.15.4.1.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipxRipIfTable	1.3.6.1.4.1.33.15.4.1		not-accessible	A list of IPX interface entries.
INT ipxRipInterface	1.3.6.1.4.1.33.15.4.2.1.3	INTEGER	read-only	The interface to reach the router. A value of ifIndex.
INT ipxRipNetwork	1.3.6.1.4.1.33.15.4.2.1.1	INTEGER	read-only	An IPX network number to which this router knows a path.
OCT ipxRipRouter	1.3.6.1.4.1.33.15.4.2.1.2	OCTET STRING	read-only	The Ethernet address of an IPX router on this network.
ipxRipTable	1.3.6.1.4.1.33.15.4.2		not-accessible	A list of RIP entries.
INT ipxRipTransTime	1.3.6.1.4.1.33.15.4.2.1.5	INTEGER	read-only	The number of 55 millisecond ticks it takes for a packet to travel to the router.
INT ipxRouting	1.3.6.1.4.1.33.15.1.1	INTEGER	read-write	Control for IPX routing services.
ipxSap	1.3.6.1.4.1.33.15.5
INT ipxSapAge	1.3.6.1.4.1.33.15.5.2.1.7	INTEGER	read-only	The age of the Sap entry in seconds.
ipxSapEntry	1.3.6.1.4.1.33.15.5.2.1		not-accessible	IPX interface parameters and counters.
OCT ipxSapHost	1.3.6.1.4.1.33.15.5.2.1.3	OCTET STRING	read-only	The Ethernet address of the IPX host of the service.
ipxSapIfEntry	1.3.6.1.4.1.33.15.5.1.1		not-accessible	IPX interface parameters and counters.
INT ipxSapIfIndex	1.3.6.1.4.1.33.15.5.1.1.1	INTEGER	read-only	An index value that uniquely identifies an IPX interface. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
ipxSapIfTable	1.3.6.1.4.1.33.15.5.1		not-accessible	A list of IPX interface entries.
INT ipxSapInterface	1.3.6.1.4.1.33.15.5.2.1.5	INTEGER	read-only	The interface of the router in the direction of the service. A value of ifIndex.
STR ipxSapName	1.3.6.1.4.1.33.15.5.2.1.1	DisplayString	read-only	The name of the service, null filled.
INT ipxSapNetwork	1.3.6.1.4.1.33.15.5.2.1.2	INTEGER	read-only	The IPX network number on which the service's host resides.
INT ipxSapSocket	1.3.6.1.4.1.33.15.5.2.1.4	INTEGER	read-only	The socket number of the service on the host.
ipxSapTable	1.3.6.1.4.1.33.15.5.2		not-accessible	A list of SAP entries.
INT ipxSapType	1.3.6.1.4.1.33.15.5.2.1.6	INTEGER	read-only	The type of the service.
ipxSystem	1.3.6.1.4.1.33.15.1
xyplex	1.3.6.1.4.1.33

RFC description

Xyplex IPX protocol routing support including RIP, SAP, and NetBIOS management.

Start monitoring Xyplex networking equipment, legacy IPX/NetWare environments (IPX routing/SAP-table advertisement status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XYPLEX-IPX-MIB

What Is XYPLEX-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description