All MIBs › XYLOGICS-ANNEX-MIB
Category: Xylogics and Xyplex Terminal Servers
Description:
Manages Xylogics Annex terminal server configuration, port status, and remote access session tracking.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| enterprises |
What Is XYLOGICS-ANNEX-MIB?
XYLOGICS-ANNEX-MIB is a vendor-specific MIB from Xylogics for the Annex family of terminal/access servers, legacy devices that provided serial dial-in/dial-out and terminal-server connectivity to host systems and networks. No module description or sample objects were available for this entry, so exact table structure cannot be confirmed, but per its short description it manages Annex configuration, per-port status, and remote-access session tracking. Such a MIB would be used to monitor the operational status of the device's serial ports and active user sessions, functioning as a software/hardware status check on whether ports are up, idle, or in error, and how many remote sessions are active. It follows the general SNMPv1 enterprise-MIB conventions typical of terminal server products of that era, with no other strong external MIB dependency evident. It was typically deployed on legacy Xylogics Annex terminal servers used for modem pools, console/dial access, and remote terminal aggregation in older network environments. Engineers can download the XYLOGICS-ANNEX-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in XYLOGICS-ANNEX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- serial port status (connected/idle/error)
- active dial-in/dial-out session count
- port configuration parameters
Supported Devices
- Xylogics Annex terminal/access servers
Monitoring Examples
No sample objects were supplied for this MIB, so specific object or table names cannot be cited with confidence; based on the short description, an administrator would be expected to poll per-port status objects to see which serial ports are connected, idle, or in error, and check session-tracking objects to count active dial-in/dial-out sessions, but the precise object names are not available from the given data.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| xylogics | 1.3.6.1.4.1.15 | |||
| prod | 1.3.6.1.4.1.15.1 | |||
| OCT prodannex | 1.3.6.1.4.1.15.1.1 | OCTET STRING | read-only | |
| annex | 1.3.6.1.4.1.15.2 | |||
| hw | 1.3.6.1.4.1.15.2.1 | |||
| INT hwType | 1.3.6.1.4.1.15.2.1.1 | INTEGER | read-only | |
| OCT hwRev | 1.3.6.1.4.1.15.2.1.2 | OCTET STRING | read-only | |
| OCT romRev | 1.3.6.1.4.1.15.2.1.3 | OCTET STRING | read-only | |
| INT serialNumber | 1.3.6.1.4.1.15.2.1.4 | INTEGER | read-only | |
| INT memorySize | 1.3.6.1.4.1.15.2.1.5 | INTEGER | read-only | |
| sw | 1.3.6.1.4.1.15.2.2 | |||
| INT swType | 1.3.6.1.4.1.15.2.2.1 | INTEGER | read-only | |
| INT swRevMajor | 1.3.6.1.4.1.15.2.2.2 | INTEGER | read-only | |
| INT swRevMinor | 1.3.6.1.4.1.15.2.2.3 | INTEGER | read-only | |
| OCT swBuild | 1.3.6.1.4.1.15.2.2.4 | OCTET STRING | read-only | |
| OCT imageName | 1.3.6.1.4.1.15.2.2.5 | OCTET STRING | read-only | |
| IP bootHost | 1.3.6.1.4.1.15.2.2.6 | IpAddress | read-only | |
| OCT defaultDomain | 1.3.6.1.4.1.15.2.2.7 | OCTET STRING | read-only | |
| OCT currentDate | 1.3.6.1.4.1.15.2.2.8 | OCTET STRING | read-only | |
| INT usableMemory | 1.3.6.1.4.1.15.2.2.9 | INTEGER | read-only | |
| GAU freeMemory | 1.3.6.1.4.1.15.2.2.10 | Gauge | read-only | |
| INT minFreeMemory | 1.3.6.1.4.1.15.2.2.11 | INTEGER | read-only | |
| GAU cpuUtilization | 1.3.6.1.4.1.15.2.2.12 | Gauge | read-only | |
| INT maxProcs | 1.3.6.1.4.1.15.2.2.13 | INTEGER | read-only | |
| INT mostProcs | 1.3.6.1.4.1.15.2.2.14 | INTEGER | read-only | |
| GAU activeProcs | 1.3.6.1.4.1.15.2.2.15 | Gauge | read-only | |
| GAU cpuReschedsI | 1.3.6.1.4.1.15.2.2.16 | Gauge | read-only | |
| CTR cpuReschedsT | 1.3.6.1.4.1.15.2.2.17 | Counter | read-only | |
| GAU contextSwI | 1.3.6.1.4.1.15.2.2.18 | Gauge | read-only | |
| CTR contextSwT | 1.3.6.1.4.1.15.2.2.19 | Counter | read-only | |
| GAU cpuActivatesI | 1.3.6.1.4.1.15.2.2.20 | Gauge | read-only | |
| CTR cpuActivatesT | 1.3.6.1.4.1.15.2.2.21 | Counter | read-only | |
| INT cBlocksTotal | 1.3.6.1.4.1.15.2.2.22 | INTEGER | read-only | |
| INT cBlocksFree | 1.3.6.1.4.1.15.2.2.23 | INTEGER | read-only | |
| INT cBlocksMinFree | 1.3.6.1.4.1.15.2.2.24 | INTEGER | read-only | |
| CTR cBlocksDenied | 1.3.6.1.4.1.15.2.2.25 | Counter | read-only | |
| INT maxCallouts | 1.3.6.1.4.1.15.2.2.26 | INTEGER | read-only | |
| INT leastCallouts | 1.3.6.1.4.1.15.2.2.27 | INTEGER | read-only | |
| GAU freeCallouts | 1.3.6.1.4.1.15.2.2.28 | Gauge | read-only | |
| ports | 1.3.6.1.4.1.15.2.3 | |||
| INT totalPorts | 1.3.6.1.4.1.15.2.3.1 | INTEGER | read-only | |
| CTR totalCharsIn | 1.3.6.1.4.1.15.2.3.2 | Counter | read-only | |
| CTR totalCharsOut | 1.3.6.1.4.1.15.2.3.3 | Counter | read-only | |
| CTR totalErrsParity | 1.3.6.1.4.1.15.2.3.4 | Counter | read-only | |
| CTR totalErrsOverrun | 1.3.6.1.4.1.15.2.3.5 | Counter | read-only | |
| CTR totalErrsFraming | 1.3.6.1.4.1.15.2.3.6 | Counter | read-only | |
| portTable | 1.3.6.1.4.1.15.2.3.7 | not-accessible | ||
| portEntry | 1.3.6.1.4.1.15.2.3.7.1 | not-accessible | ||
| INT portIndex | 1.3.6.1.4.1.15.2.3.7.1.1 | INTEGER | read-only | |
| INT iSpeed | 1.3.6.1.4.1.15.2.3.7.1.2 | INTEGER | read-only | |
| INT oSpeed | 1.3.6.1.4.1.15.2.3.7.1.3 | INTEGER | read-only | |
| INT ctrlLines | 1.3.6.1.4.1.15.2.3.7.1.4 | INTEGER | read-only | |
| INT flowTypeIn | 1.3.6.1.4.1.15.2.3.7.1.5 | INTEGER | read-only | |
| INT flowTypeOut | 1.3.6.1.4.1.15.2.3.7.1.6 | INTEGER | read-only | |
| INT bitsPerChar | 1.3.6.1.4.1.15.2.3.7.1.7 | INTEGER | read-only | |
| INT stopBits | 1.3.6.1.4.1.15.2.3.7.1.8 | INTEGER | read-only | |
| INT parity | 1.3.6.1.4.1.15.2.3.7.1.9 | INTEGER | read-only | |
| INT modemDCD | 1.3.6.1.4.1.15.2.3.7.1.10 | INTEGER | read-only | |
| INT modemDTR | 1.3.6.1.4.1.15.2.3.7.1.11 | INTEGER | read-only | |
| INT modemCTS | 1.3.6.1.4.1.15.2.3.7.1.12 | INTEGER | read-only | |
| INT modemRTS | 1.3.6.1.4.1.15.2.3.7.1.13 | INTEGER | read-only | |
| CTR charsIn | 1.3.6.1.4.1.15.2.3.7.1.14 | Counter | read-only | |
| CTR charsOut | 1.3.6.1.4.1.15.2.3.7.1.15 | Counter | read-only | |
| CTR errsParity | 1.3.6.1.4.1.15.2.3.7.1.16 | Counter | read-only | |
| CTR errsOverrun | 1.3.6.1.4.1.15.2.3.7.1.17 | Counter | read-only | |
| CTR errsFraming | 1.3.6.1.4.1.15.2.3.7.1.18 | Counter | read-only | |
| GAU inCC | 1.3.6.1.4.1.15.2.3.7.1.19 | Gauge | read-only | |
| GAU outCC | 1.3.6.1.4.1.15.2.3.7.1.20 | Gauge | read-only |
RFC description
Xylogics Annex terminal hardware and software management including port monitoring.
Start monitoring Xylogics Annex terminal/access servers (per-port status/remote-session-tracking status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.