XYLAN-XIP-MIB

All MIBs › XYLAN-XIP-MIB

Category: Xylan OmniSwitch

Description: Manages Xylan OmniSwitch extended IP features including policy routing and traffic prioritization.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XYLAN-XIP-MIB?

XYLAN-XIP-MIB is a legacy Xylan Corporation (later Alcatel, built on XYLAN-BASE-MIB) proprietary MIB reporting GMAP/XMAP (Group/eXtended Multicast Address Protocol) state — Xylan's proprietary multicast-group-mapping mechanism. Its objects cover GMAP state, gap/update/hold time, last-trap reason/port/MAC/protocol/group, a GMAP table (MAC address, protocol, group, source switch, flags, timeout), and XMAP state, discovery/common time, last-trap reason/port, and a per-port table. As a status/configuration MIB it lets an administrator confirm multicast-group mapping state and review the last GMAP/XMAP trap on a legacy Xylan (Alcatel) OmniSwitch. It is deployed on legacy Xylan Corporation (Alcatel) OmniSwitch equipment (GMAP/XMAP multicast mapping). Engineers can download the XYLAN-XIP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XYLAN-XIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Xylan Corporation (Alcatel) OmniSwitch equipment (GMAP/XMAP multicast mapping)

Monitoring Examples

An administrator checks xylanXIPGMAPLastTrapReason and xylanXIPGMAPTable to review the last multicast-group-mapping event on a legacy Xylan (Alcatel) OmniSwitch.

What Can Be Monitored

GMAP/XMAP multicast-group mapping state and trap history

Imported Objects

From BRIDGE-MIB

MacAddress

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

IpAddress

From XYLAN-BASE-MIB

xylanXIPArch

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
xylanXIPGMAPconfig	1.3.6.1.4.1.800.2.20.1
INT xylanXIPGMAPstate	1.3.6.1.4.1.800.2.20.1.1	INTEGER	read-write	Current state of the GMAP functionality.
INT xylanXIPGMAPgaptime	1.3.6.1.4.1.800.2.20.1.2	INTEGER	read-write	The time in milliseconds for gaps between successive GMAP protocol packets.
INT xylanXIPGMAPupdatetime	1.3.6.1.4.1.800.2.20.1.3	INTEGER	read-write	The time in seconds between GMAP update packet generation.
INT xylanXIPGMAPholdtime	1.3.6.1.4.1.800.2.20.1.4	INTEGER	read-write	The time in minutes that the switch will remember information received in GMAP update packets.
INT xylanXIPGMAPLastTrapReason	1.3.6.1.4.1.800.2.20.1.5	INTEGER	read-only	Reason for last GMAP update to not be applied. Valid reasons are: 0 - No trap has been sent 1 - Target group is an authenticated group 2 - Update would conflict with a binding rule 3 - Update would create two different group entries for the same protocol 4 - Update would create two different protocol entries for the same group 5 - Target group is not mobile
INT xylanXIPGMAPLastTrapPort	1.3.6.1.4.1.800.2.20.1.6	INTEGER	read-only	The virtual port number of the last port on which the GMAP change was not applied because of a conflict.
MAC xylanXIPGMAPLastTrapMac	1.3.6.1.4.1.800.2.20.1.7	MacAddress	read-only	The last MAC address for which a GMAP change was not applied because of a conflict.
INT xylanXIPGMAPLastTrapProtocol	1.3.6.1.4.1.800.2.20.1.8	INTEGER	read-only	The protocol identifier of the last GMAP change that was not applied because of a conflict.
INT xylanXIPGMAPLastTrapGroup	1.3.6.1.4.1.800.2.20.1.9	INTEGER	read-only	The group identifier of the last GMAP change that was not applied because of a conflict.
xylanXIPGMAPTable	1.3.6.1.4.1.800.2.20.1.10		not-accessible	GMAP MAC address list.
xylanXIPGMAPTableEntry	1.3.6.1.4.1.800.2.20.1.10.1		not-accessible	GMAP MAC address list.
MAC xylanXIPGMAPMacAddr	1.3.6.1.4.1.800.2.20.1.10.1.1	MacAddress	read-only	The MAC address of a GMAP entry.
INT xylanXIPGMAPProtocol	1.3.6.1.4.1.800.2.20.1.10.1.2	INTEGER	read-only	The protocol identifier for a GMAP entry.
INT xylanXIPGMAPGroup	1.3.6.1.4.1.800.2.20.1.10.1.3	INTEGER	read-only	The group identifier for a GMAP entry.
MAC xylanXIPGMAPSrcSwitch	1.3.6.1.4.1.800.2.20.1.10.1.4	MacAddress	read-only	The MAC address of the switch that provided the information for a GMAP entry.
OCT xylanXIPGMAPFlags	1.3.6.1.4.1.800.2.20.1.10.1.5	OCTET STRING	read-only	The flags for a GMAP entry. The least significant byte holds the router flags. The next byte contains the flags from auto-tracker. The most significant 2 bytes are not currently used.
INT xylanXIPGMAPTimeout	1.3.6.1.4.1.800.2.20.1.10.1.6	INTEGER	read-only	Seconds remaining before this entry will age out.
xylanXIPXMAPconfig	1.3.6.1.4.1.800.2.20.2
INT xylanXIPXMAPstate	1.3.6.1.4.1.800.2.20.2.1	INTEGER	read-write	Current state of the XMAP agent.
INT xylanXIPXMAPdisctime	1.3.6.1.4.1.800.2.20.2.2	INTEGER	read-write	The time in seconds for interval betweeen hello packets in the initial discovery phase of the XMAP protocol.
INT xylanXIPXMAPcommontime	1.3.6.1.4.1.800.2.20.2.3	INTEGER	read-write	The time in seconds for the interval between hello packets at other than the discovery phase.
INT xylanXIPXMAPLastTrapReason	1.3.6.1.4.1.800.2.20.2.4	INTEGER	read-only	Reason for last change of port status. Valid reasons are: 0 - no trap has been sent 1 - port added 2 - change of information on existing port 3 - port deleted
INT xylanXIPXMAPLastTrapPort	1.3.6.1.4.1.800.2.20.2.5	INTEGER	read-only	The virtual port number of the port that most recently changed.
xylanXIPXMAPports	1.3.6.1.4.1.800.2.20.2.6		not-accessible	XMAP adjacent switch, remote port, and group information.
xylanXIPXMAPPortentry	1.3.6.1.4.1.800.2.20.2.6.1		not-accessible	XMAP adjacent switch, remote port, and group information.
INT xylanXIPXMAPAdjPort	1.3.6.1.4.1.800.2.20.2.6.1.1	INTEGER	read-only	The local virtual port number which has an adjacent switch connected.
MAC xylanXIPXMAPRemMac	1.3.6.1.4.1.800.2.20.2.6.1.2	MacAddress	read-only	The MAC Address of the MPM in the adjacent switch.
INT xylanXIPXMAPRemPort	1.3.6.1.4.1.800.2.20.2.6.1.3	INTEGER	read-only	The remote virtual port number in the adjacent switch.
INT xylanXIPXMAPRemGroup	1.3.6.1.4.1.800.2.20.2.6.1.4	INTEGER	read-only	The remote group for the virtual port in the adjacent switch.
xylanXIPXMAPhosts	1.3.6.1.4.1.800.2.20.2.7		not-accessible	XMAP adjacent switch IP address information.
xylanXIPXMAPHostentry	1.3.6.1.4.1.800.2.20.2.7.1		not-accessible	XMAP adjacent switch IP address information.
MAC xylanXIPXMAPHostMac	1.3.6.1.4.1.800.2.20.2.7.1.1	MacAddress	read-only	The MAC Address of the MPM in the adjacent switch.
IP xylanXIPXMAPIpAddr	1.3.6.1.4.1.800.2.20.2.7.1.2	IpAddress	read-only	An IP address of the adjacent switch.

RFC description

Defines Xylan Interswitch Protocol (XIP) management objects for GMAP and XMAP configurations on network switches.

Start monitoring Legacy Xylan Corporation (Alcatel) OmniSwitch equipment, GMAP/XMAP multicast mapping (multicast-group-mapping/last-trap status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XYLAN-XIP-MIB

What Is XYLAN-XIP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description