XYLAN-IPX-MIB

All MIBs › XYLAN-IPX-MIB

Category: Xylan OmniSwitch

Description: Manages Xylan OmniSwitch IPX routing, SAP table, and network number configuration parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XYLAN-IPX-MIB?

XYLAN-IPX-MIB is a legacy Xylan Corporation (later Alcatel, built on XYLAN-BASE-MIB) proprietary MIB reporting IPX static routes and RIP/SAP filtering. Its static-route table, keyed by network number, records admin state, next-hop network/node, tick count, and hop count, while a RIP/SAP-filter table records filter number, admin state, filter type, network/node and masks, service type, mode, group ID, VLAN ID, WAN type, and slot/port. As a configuration/status MIB it lets an administrator confirm static IPX routing and RIP/SAP filtering rules on a legacy Xylan (Alcatel) OmniSwitch. It is deployed on legacy Xylan Corporation (Alcatel) OmniSwitch equipment (IPX). Engineers can download the XYLAN-IPX-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XYLAN-IPX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Xylan Corporation (Alcatel) OmniSwitch equipment (IPX)

Monitoring Examples

An administrator checks xylanIpxStaticRouteNextHopNet and xylanIpxRipSapFilterType to confirm IPX static-route and RIP/SAP filter configuration on a legacy Xylan (Alcatel) OmniSwitch.

What Can Be Monitored

IPX static-route and RIP/SAP filter configuration

Imported Objects

From RFC-1212

OBJECT-TYPE

From XYLAN-BASE-MIB

xylanIpxArch

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
xylanIpxRoutingGroup	1.3.6.1.4.1.800.2.6.1
xylanIpxStaticRouteTable	1.3.6.1.4.1.800.2.6.1.1		not-accessible	The Static Routes table contains information about all destinations reached via statically configured routes.
xylanIpxStaticRouteEntry	1.3.6.1.4.1.800.2.6.1.1.1		not-accessible	Each entry corresponds to one static route.
OCT xylanIpxStaticRouteNetNum	1.3.6.1.4.1.800.2.6.1.1.1.1	OCTET STRING	read-write	The IPX network number of the route's destination.
INT xylanIpxStaticRouteAdminState	1.3.6.1.4.1.800.2.6.1.1.1.2	INTEGER	read-write	The current status of this route. active (1) means the route is functioning, delete (2) tell SNMP to delete the route
OCT xylanIpxStaticRouteNextHopNet	1.3.6.1.4.1.800.2.6.1.1.1.3	OCTET STRING	read-write	The IPX network number of the router used to reach the first hop in the static route.
OCT xylanIpxStaticRouteNextHopNode	1.3.6.1.4.1.800.2.6.1.1.1.4	OCTET STRING	read-write	The IPX node number of the router used to reach the first hop in the static route.
INT xylanIpxStaticRouteTicks	1.3.6.1.4.1.800.2.6.1.1.1.5	INTEGER	read-only	The delay, in ticks, to reach the route's destination.
INT xylanIpxStaticRouteHopCount	1.3.6.1.4.1.800.2.6.1.1.1.6	INTEGER	read-only	The number of hops necessary to reach the destination.
xylanIpxFilterGroup	1.3.6.1.4.1.800.2.6.2
xylanIpxRipSapFilterTable	1.3.6.1.4.1.800.2.6.2.1		not-accessible	The IPX Rip/Sap Filter Table contains information about all filters that have been defined.
xylanIpxRipSapFilterEntry	1.3.6.1.4.1.800.2.6.2.1.1		not-accessible	Each entry corresponds to one filter.
INT xylanIpxRipSapFilterNum	1.3.6.1.4.1.800.2.6.2.1.1.1	INTEGER	read-only	The number identifying this instance. This number can be used when specifying a filter to delete.
INT xylanIpxRipSapFilterAdminState	1.3.6.1.4.1.800.2.6.2.1.1.2	INTEGER	read-write	The current status of this filter, active (1) means the filter is functioning, delete (2) tells SNMP to delete the filter
INT xylanIpxRipSapFilterType	1.3.6.1.4.1.800.2.6.2.1.1.3	INTEGER	read-write	The type of filter.
OCT xylanIpxRipSapFilterNet	1.3.6.1.4.1.800.2.6.2.1.1.4	OCTET STRING	read-write	The IPX Network Address to filter. A network address of all 0's is used to denote All Networks.
OCT xylanIpxRipSapFilterNetMask	1.3.6.1.4.1.800.2.6.2.1.1.5	OCTET STRING	read-write	The IPX Network Mask to be used.
OCT xylanIpxRipSapFilterNode	1.3.6.1.4.1.800.2.6.2.1.1.6	OCTET STRING	read-write	The IPX node address to filter. A node address of all 0's is used to denote All Nodes.
OCT xylanIpxRipSapFilterNodeMask	1.3.6.1.4.1.800.2.6.2.1.1.7	OCTET STRING	read-write	The IPX node address mask to be used.
INT xylanIpxRipSapFilterSvcType	1.3.6.1.4.1.800.2.6.2.1.1.8	INTEGER	read-write	The SAP service type on which to filter. The SAP service types are defined by Novell. A value of ALL (65535) indicates that all services will be filtered.
INT xylanIpxRipSapFilterMode	1.3.6.1.4.1.800.2.6.2.1.1.9	INTEGER	read-write	The action defined by this filter. block (1) means packets matching this filter will be blocked, and allow (0) means that packets matching this filter will be allowed.
INT xylanIpxRipSapFilterGroupId	1.3.6.1.4.1.800.2.6.2.1.1.10	INTEGER	read-write	The GroupId can be used to apply this filter to a particular interface. A GroupId of 0 means that the filter is global.
INT xylanIpxRipSapFilterVlanId	1.3.6.1.4.1.800.2.6.2.1.1.11	INTEGER	read-write	The VlanId for this filter.
INT xylanIpxRipSapFilterWanType	1.3.6.1.4.1.800.2.6.2.1.1.12	INTEGER	read-write	If the Vlan has Wan Routing enabled, this object can be used to specify whether this interface is a Frame Relay service or a PPP service. This will be used to determine whether the slot/port/vc or PeerId fields are applicable to this entry. A value of 1 implies that this field is not used. (The interface is not a WAN interface or the filter is not being applied to a specific VC or PeerId.) A value of 2 indicates that this is a Frame Relay service in which case the slot/port/vc fields can be used to apply the filter to a specific VC. A value of 3 indicates that this is a PPP service and the Peer ID field may be used.
INT xylanIpxRipSapFilterSlot	1.3.6.1.4.1.800.2.6.2.1.1.13	INTEGER	read-write	If the WanType specifies a Frame Relay service, the slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC).
INT xylanIpxRipSapFilterPort	1.3.6.1.4.1.800.2.6.2.1.1.14	INTEGER	read-write	If the WanType specifies a Frame Relay service, the slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC).
INT xylanIpxRipSapFilterVc	1.3.6.1.4.1.800.2.6.2.1.1.15	INTEGER	read-write	If the WanType specifies a Frame Relay service, the slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC).
INT xylanIpxRipSapFilterPeerId	1.3.6.1.4.1.800.2.6.2.1.1.16	INTEGER	read-write	If the WanType specifies a PPP service, the PeerId can be used to apply this filter to a particular Peer.
xylanIpxWatchdogSpoofGroup	1.3.6.1.4.1.800.2.6.3
xylanIpxWatchdogSpoofTable	1.3.6.1.4.1.800.2.6.3.1		not-accessible	The IPX Watchdog Spoofing Table contains information about all of the WAN routing services and their current IPX spoofing status.
xylanIpxWatchdogSpoofEntry	1.3.6.1.4.1.800.2.6.3.1.1		not-accessible	Each entry corresponds to one WAN routing service.
INT xylanIpxWatchdogSpoofGroupId	1.3.6.1.4.1.800.2.6.3.1.1.1	INTEGER	read-write	The GroupId of the WAN routing service that this entry applies to.
INT xylanIpxWatchdogSpoofMode	1.3.6.1.4.1.800.2.6.3.1.1.2	INTEGER	read-write	This controls whether the IPX Watchdog Spoofing is enabled or disabled. When enabled, this routing service will spoof IPX Watchdog packets. When disabled, this routing service will not spoof IPX Watchdog packets.
xylanIpxSerialFilterGroup	1.3.6.1.4.1.800.2.6.4
xylanIpxSerialFilterTable	1.3.6.1.4.1.800.2.6.4.1		not-accessible	The IPX Serialization Filtering Table contains information about all of the WAN routing services and their current IPX Serialization Filtering status.
xylanIpxSerialFilterEntry	1.3.6.1.4.1.800.2.6.4.1.1		not-accessible	Each entry corresponds to one WAN routing service.
INT xylanIpxSerialFilterGroupId	1.3.6.1.4.1.800.2.6.4.1.1.1	INTEGER	read-write	The GroupId of the WAN routing service that this entry applies to.
INT xylanIpxSerialFilterMode	1.3.6.1.4.1.800.2.6.4.1.1.2	INTEGER	read-write	This controls whether the IPX Serialization Filtering is enabled or disabled. When enabled, this routing service will filter IPX Serialization packets. When disabled, this routing service will not filter IPX Serialization packets.
xylanSpxKeepaliveSpoofGroup	1.3.6.1.4.1.800.2.6.5
xylanSpxKeepaliveSpoofTable	1.3.6.1.4.1.800.2.6.5.1		not-accessible	The SPX Keepalive Spoofing Table contains information about all of the WAN routing services and their current SPX Keepalive spoofing status.
xylanSpxKeepaliveSpoofEntry	1.3.6.1.4.1.800.2.6.5.1.1		not-accessible	Each entry corresponds to one WAN routing service.
INT xylanSpxKeepaliveSpoofGroupId	1.3.6.1.4.1.800.2.6.5.1.1.1	INTEGER	read-write	The GroupId of the WAN routing service that this entry applies to.
INT xylanSpxKeepaliveSpoofMode	1.3.6.1.4.1.800.2.6.5.1.1.2	INTEGER	read-write	This controls whether the SPX Keepalive Spoofing is enabled or disabled. When enabled, this routing service will spoof SPX Keepalive packets. When disabled, this routing service will not spoof SPX Keepalive packets.
xylanIpxType20Group	1.3.6.1.4.1.800.2.6.6
xylanIpxType20Table	1.3.6.1.4.1.800.2.6.6.1		not-accessible	The IPX Type 20 packets allow NetBios to use IPX. This can enable the passing of packet on each interface.
xylanIpxType20Entry	1.3.6.1.4.1.800.2.6.6.1.1		not-accessible	Each entry corresponds to one Virtual LAN.
INT xylanIpxType20VlanId	1.3.6.1.4.1.800.2.6.6.1.1.1	INTEGER	read-write	The VLAN Id of the routing interface that this entry applies to.
INT xylanIpxType20Mode	1.3.6.1.4.1.800.2.6.6.1.1.2	INTEGER	read-write	This controls whether IPX Type 20 packet are enabled or disabled. When enabled, this routing interface will forward Type 20 packets. When disabled, the packets will not.
xylanIpxTimerGroup	1.3.6.1.4.1.800.2.6.7
xylanIpxTimerTable	1.3.6.1.4.1.800.2.6.7.1		not-accessible	The IPX Timer allows adjustable variation of the RIP and SAP timers.
xylanIpxTimerEntry	1.3.6.1.4.1.800.2.6.7.1.1		not-accessible	Each entry corresponds to one Virtual LAN.
INT xylanIpxTimerVlanId	1.3.6.1.4.1.800.2.6.7.1.1.1	INTEGER	read-write	The VLAN Id of the routing interface that this entry applies to.
INT xylanIpxTimerSap	1.3.6.1.4.1.800.2.6.7.1.1.2	INTEGER	read-write	This controls whether IPX SAP packet timer duration.
INT xylanIpxTimerRip	1.3.6.1.4.1.800.2.6.7.1.1.3	INTEGER	read-write	This controls whether IPX RIP packet timer duration.
xylanIpxDefRouteGroup	1.3.6.1.4.1.800.2.6.8
xylanIpxDefRouteTable	1.3.6.1.4.1.800.2.6.8.1		not-accessible	The default route table contains information about the destinations to which all packets are sent when the destination network is not known.
xylanIpxDefRouteEntry	1.3.6.1.4.1.800.2.6.8.1.1		not-accessible	One table entry per switch for default route.
INT xylanIpxDefRouteNum	1.3.6.1.4.1.800.2.6.8.1.1.1	INTEGER	read-write	The table row ID will always be 1.
OCT xylanIpxDefRouteNet	1.3.6.1.4.1.800.2.6.8.1.1.2	OCTET STRING	read-write	The IPX network number of the router used to reach the first hop in the default route.
OCT xylanIpxDefRouteNode	1.3.6.1.4.1.800.2.6.8.1.1.3	OCTET STRING	read-write	The IPX node number of the router used to reach the first hop in the default route.
xylanIpxExtGroup	1.3.6.1.4.1.800.2.6.9
INT xylanIpxExtMsg	1.3.6.1.4.1.800.2.6.9.1	INTEGER	read-write	A boolean variable that indicated whether extended RIP/SAP packets are sent and received.

RFC description

Manages IPX routing, filtering, and spoofing configuration on Alcatel Xylan switches.

Start monitoring Legacy Xylan Corporation (Alcatel) OmniSwitch equipment, IPX (static-route/RIP-SAP-filter config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XYLAN-IPX-MIB

What Is XYLAN-IPX-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description