All MIBs › Wellfleet-X25PAD-MIB
Category: Wellfleet BayNetworks WAN Interfaces
Description: Manages Wellfleet X.25 PAD (Packet Assembler/Disassembler) parameters and asynchronous terminal sessions.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Wellfleet-X25PAD-MIB?
This is a Wellfleet (later Bay Networks/Nortel) private enterprise MIB for X.25 PAD (Packet Assembler/Disassembler) functionality on Wellfleet routers, which terminates asynchronous character-mode terminal sessions and packages them into X.25 packet streams. It exposes configuration and status objects for PAD profile parameters (X.3 parameter sets), asynchronous port/session bindings, and the X.25 virtual-circuit association for each PAD session. Its monitoring value lies in session/service status — tracking active PAD sessions and their state gives visibility into whether legacy async terminal-to-X.25 connectivity is functioning, the service-status analog for this legacy WAN feature. It depends on the underlying Wellfleet X.25 MIB for the packet-layer virtual circuits that each PAD session rides on. It was deployed on Wellfleet/Bay Networks routers in legacy X.25 packet-switched WAN environments connecting async terminals to X.25 hosts. Engineers can download the Wellfleet-X25PAD-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-X25PAD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Wellfleet/Bay Networks router with X.25 PAD interface
Monitoring Examples
No sample_objects were provided for this module; based on its X.25 PAD role, a realistic use would be polling per-session state and the associated X.25 virtual-circuit identifier to confirm an asynchronous terminal session is correctly mapped and active rather than stuck or disconnected.
What Can Be Monitored
- active PAD session state
- X.3 parameter profile settings
- associated X.25 virtual circuit
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter |
From RFC1213-MIB
| DisplayString |
From Wellfleet-COMMON-MIB
| wfX25PadGroup | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT wfX25PadCurrentCfgCircuit | 1.3.6.1.4.1.18.3.5.9.12.2.1.4 | INTEGER | read-only | Circuit number, filled in by ISDB mib gate |
| INT wfX25PadCurrentCfgConnector | 1.3.6.1.4.1.18.3.5.9.12.2.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| STR wfX25PadCurrentCfgDNIC | 1.3.6.1.4.1.18.3.5.9.12.2.1.6 | DisplayString | read-only | Data Network Identification Code |
| wfX25PadCurrentCfgEntry | 1.3.6.1.4.1.18.3.5.9.12.2.1 | not-accessible | An entry in the X25 Pad Config Table | |
| INT wfX25PadCurrentCfgLCNHigh | 1.3.6.1.4.1.18.3.5.9.12.2.1.9 | INTEGER | read-only | Upper range for logical channel numbers |
| INT wfX25PadCurrentCfgLCNLow | 1.3.6.1.4.1.18.3.5.9.12.2.1.8 | INTEGER | read-only | Lower range for logical channel numbers |
| INT wfX25PadCurrentCfgLenSubAddress | 1.3.6.1.4.1.18.3.5.9.12.2.1.7 | INTEGER | read-only | Length of X.121 subaddress |
| INT wfX25PadCurrentCfgSlot | 1.3.6.1.4.1.18.3.5.9.12.2.1.2 | INTEGER | read-only | Instance ID Slot, filled in by ISDB mib gate |
| INT wfX25PadCurrentCfgState | 1.3.6.1.4.1.18.3.5.9.12.2.1.1 | INTEGER | read-only | Current state of X.25 PAD sofware on the I-SDB |
| wfX25PadCurrentCfgTable | 1.3.6.1.4.1.18.3.5.9.12.2 | not-accessible | Table of X25 PAD Config Objects | |
| STR wfX25PadCurrentCfgX121Addr | 1.3.6.1.4.1.18.3.5.9.12.2.1.5 | DisplayString | read-only | X.121 address of the X.25 Pad |
| INT wfX25PadDefaultCfgCircuit | 1.3.6.1.4.1.18.3.5.9.12.1.1.6 | INTEGER | read-only | Circuit number, filled in by ISDB mib gate |
| INT wfX25PadDefaultCfgConnector | 1.3.6.1.4.1.18.3.5.9.12.1.1.5 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfX25PadDefaultCfgDelete | 1.3.6.1.4.1.18.3.5.9.12.1.1.1 | INTEGER | read-write | Create/Delete parameter |
| INT wfX25PadDefaultCfgDisable | 1.3.6.1.4.1.18.3.5.9.12.1.1.2 | INTEGER | read-write | Enable/Disable parameter |
| STR wfX25PadDefaultCfgDNIC | 1.3.6.1.4.1.18.3.5.9.12.1.1.8 | DisplayString | read-write | Data Network Identification Code |
| wfX25PadDefaultCfgEntry | 1.3.6.1.4.1.18.3.5.9.12.1.1 | not-accessible | An entry in the X25 Pad Config Table | |
| INT wfX25PadDefaultCfgLCNHigh | 1.3.6.1.4.1.18.3.5.9.12.1.1.11 | INTEGER | read-write | Upper range for logical channel numbers |
| INT wfX25PadDefaultCfgLCNLow | 1.3.6.1.4.1.18.3.5.9.12.1.1.10 | INTEGER | read-write | Lower range for logical channel numbers |
| INT wfX25PadDefaultCfgLenSubAddress | 1.3.6.1.4.1.18.3.5.9.12.1.1.9 | INTEGER | read-write | Length of X.121 subaddress |
| INT wfX25PadDefaultCfgSlot | 1.3.6.1.4.1.18.3.5.9.12.1.1.4 | INTEGER | read-only | Instance ID Slot, filled in by ISDB mib gate |
| INT wfX25PadDefaultCfgState | 1.3.6.1.4.1.18.3.5.9.12.1.1.3 | INTEGER | read-only | Current state of X.25 PAD sofware on the I-SDB |
| wfX25PadDefaultCfgTable | 1.3.6.1.4.1.18.3.5.9.12.1 | not-accessible | Table of X25 PAD Config Objects | |
| STR wfX25PadDefaultCfgX121Addr | 1.3.6.1.4.1.18.3.5.9.12.1.1.7 | DisplayString | read-write | X.121 address of the X.25 Pad |
| INT wfX25PadPortCurrentCfgConnector | 1.3.6.1.4.1.18.3.5.9.12.5.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| wfX25PadPortCurrentCfgEntry | 1.3.6.1.4.1.18.3.5.9.12.5.1 | not-accessible | An entry in the X25 Pad Port Config Table | |
| INT wfX25PadPortCurrentCfgFullAddressing | 1.3.6.1.4.1.18.3.5.9.12.5.1.38 | INTEGER | read-write | Determines whether calling addresses should be included or not |
| INT wfX25PadPortCurrentCfgIntervalTimer | 1.3.6.1.4.1.18.3.5.9.12.5.1.37 | INTEGER | read-write | Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them |
| INT wfX25PadPortCurrentCfgLenRawFacilities | 1.3.6.1.4.1.18.3.5.9.12.5.1.31 | INTEGER | read-only | Length of the user defined facilities |
| INT wfX25PadPortCurrentCfgLenSubAddress | 1.3.6.1.4.1.18.3.5.9.12.5.1.6 | INTEGER | read-only | Size of the Subaddress portion of an X.121 address |
| INT wfX25PadPortCurrentCfgLenUserData | 1.3.6.1.4.1.18.3.5.9.12.5.1.29 | INTEGER | read-only | Length of the user defined data |
| INT wfX25PadPortCurrentCfgNumber | 1.3.6.1.4.1.18.3.5.9.12.5.1.4 | INTEGER | read-only | Instance ID Async Port, filled in by ISDB mib gate |
| OCT wfX25PadPortCurrentCfgPacketSizeNegotiation | 1.3.6.1.4.1.18.3.5.9.12.5.1.35 | OCTET STRING | read-only | This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission. |
| OCT wfX25PadPortCurrentCfgRawFacilitiesData | 1.3.6.1.4.1.18.3.5.9.12.5.1.32 | OCTET STRING | read-only | User defined facilities filed represented in hexadecimal |
| OCT wfX25PadPortCurrentCfgReverseCharge | 1.3.6.1.4.1.18.3.5.9.12.5.1.33 | OCTET STRING | read-only | If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility. |
| INT wfX25PadPortCurrentCfgSlot | 1.3.6.1.4.1.18.3.5.9.12.5.1.2 | INTEGER | read-only | Instance ID Slot, filled in by ISDB mib gate |
| INT wfX25PadPortCurrentCfgState | 1.3.6.1.4.1.18.3.5.9.12.5.1.1 | INTEGER | read-only | Current state of X.25 PAD sofware on the I-SDB |
| STR wfX25PadPortCurrentCfgSubAddress | 1.3.6.1.4.1.18.3.5.9.12.5.1.5 | DisplayString | read-only | Subaddress portion of an X.121 address that is used by an application and is transparent to the network |
| wfX25PadPortCurrentCfgTable | 1.3.6.1.4.1.18.3.5.9.12.5 | not-accessible | Table of X25 PAD Port Config Objects | |
| OCT wfX25PadPortCurrentCfgThruClassNegotiation | 1.3.6.1.4.1.18.3.5.9.12.5.1.34 | OCTET STRING | read-only | This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission. |
| OCT wfX25PadPortCurrentCfgUserData | 1.3.6.1.4.1.18.3.5.9.12.5.1.30 | OCTET STRING | read-only | User defined data field represented in hexadecimal |
| OCT wfX25PadPortCurrentCfgWindowSizeNegotiation | 1.3.6.1.4.1.18.3.5.9.12.5.1.36 | OCTET STRING | read-only | This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission. |
| INT wfX25PadPortCurrentCfgX3break | 1.3.6.1.4.1.18.3.5.9.12.5.1.13 | INTEGER | read-only | Selection of operation of the PAD on receipt of the break signal |
| INT wfX25PadPortCurrentCfgX3Cdelete | 1.3.6.1.4.1.18.3.5.9.12.5.1.22 | INTEGER | read-only | Character delete |
| INT wfX25PadPortCurrentCfgX3CRpad | 1.3.6.1.4.1.18.3.5.9.12.5.1.15 | INTEGER | read-only | Padding after carriage return |
| INT wfX25PadPortCurrentCfgX3device | 1.3.6.1.4.1.18.3.5.9.12.5.1.11 | INTEGER | read-only | Ancillary device control |
| INT wfX25PadPortCurrentCfgX3discard | 1.3.6.1.4.1.18.3.5.9.12.5.1.14 | INTEGER | read-only | Discard output |
| INT wfX25PadPortCurrentCfgX3echo | 1.3.6.1.4.1.18.3.5.9.12.5.1.8 | INTEGER | read-only | PAD echo |
| INT wfX25PadPortCurrentCfgX3Edit | 1.3.6.1.4.1.18.3.5.9.12.5.1.21 | INTEGER | read-only | Editing |
| INT wfX25PadPortCurrentCfgX3escape | 1.3.6.1.4.1.18.3.5.9.12.5.1.7 | INTEGER | read-only | PAD recall using a character |
| INT wfX25PadPortCurrentCfgX3Esignals | 1.3.6.1.4.1.18.3.5.9.12.5.1.25 | INTEGER | read-only | Editing PAD service signals |
| INT wfX25PadPortCurrentCfgX3flow | 1.3.6.1.4.1.18.3.5.9.12.5.1.18 | INTEGER | read-only | Flow Control of the PAD by the start-stop mode DTE |
| INT wfX25PadPortCurrentCfgX3folding | 1.3.6.1.4.1.18.3.5.9.12.5.1.16 | INTEGER | read-only | Line folding |
| INT wfX25PadPortCurrentCfgX3forward | 1.3.6.1.4.1.18.3.5.9.12.5.1.9 | INTEGER | read-only | Selection of the data forwarding characters |
| INT wfX25PadPortCurrentCfgX3idle | 1.3.6.1.4.1.18.3.5.9.12.5.1.10 | INTEGER | read-only | Selection of the idle timer delay |
| INT wfX25PadPortCurrentCfgX3Ldelete | 1.3.6.1.4.1.18.3.5.9.12.5.1.23 | INTEGER | read-only | Line delete |
| INT wfX25PadPortCurrentCfgX3Ldisplay | 1.3.6.1.4.1.18.3.5.9.12.5.1.24 | INTEGER | read-only | Line display |
| INT wfX25PadPortCurrentCfgX3LFinsert | 1.3.6.1.4.1.18.3.5.9.12.5.1.19 | INTEGER | read-only | Linefeed insertion after carriage return |
| INT wfX25PadPortCurrentCfgX3LFpad | 1.3.6.1.4.1.18.3.5.9.12.5.1.20 | INTEGER | read-only | Linefeed padding |
| INT wfX25PadPortCurrentCfgX3Mask | 1.3.6.1.4.1.18.3.5.9.12.5.1.26 | INTEGER | read-only | Echo mask |
| INT wfX25PadPortCurrentCfgX3page | 1.3.6.1.4.1.18.3.5.9.12.5.1.28 | INTEGER | read-only | Page wait |
| INT wfX25PadPortCurrentCfgX3parity | 1.3.6.1.4.1.18.3.5.9.12.5.1.27 | INTEGER | read-only | Parity treatment |
| INT wfX25PadPortCurrentCfgX3signals | 1.3.6.1.4.1.18.3.5.9.12.5.1.12 | INTEGER | read-only | Control of PAD service signals |
| INT wfX25PadPortCurrentCfgX3speed | 1.3.6.1.4.1.18.3.5.9.12.5.1.17 | INTEGER | read-only | Binary speed |
| INT wfX25PadPortDefaultCfgConnector | 1.3.6.1.4.1.18.3.5.9.12.4.1.5 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| INT wfX25PadPortDefaultCfgDelete | 1.3.6.1.4.1.18.3.5.9.12.4.1.1 | INTEGER | read-write | Create/Delete parameter |
| INT wfX25PadPortDefaultCfgDisable | 1.3.6.1.4.1.18.3.5.9.12.4.1.2 | INTEGER | read-write | Enable/Disable parameter |
| wfX25PadPortDefaultCfgEntry | 1.3.6.1.4.1.18.3.5.9.12.4.1 | not-accessible | An entry in the X25 Pad Port Config Table | |
| INT wfX25PadPortDefaultCfgFullAddressing | 1.3.6.1.4.1.18.3.5.9.12.4.1.40 | INTEGER | read-write | Determines whether calling addresses should be included or not |
| INT wfX25PadPortDefaultCfgIntervalTimer | 1.3.6.1.4.1.18.3.5.9.12.4.1.39 | INTEGER | read-write | Time (where 1 equals 10 milliseconds) that the X.25 PAD will wait before forwarding packets with characters in them |
| INT wfX25PadPortDefaultCfgLenRawFacilities | 1.3.6.1.4.1.18.3.5.9.12.4.1.33 | INTEGER | read-write | Length of the user defined facilities |
| INT wfX25PadPortDefaultCfgLenSubAddress | 1.3.6.1.4.1.18.3.5.9.12.4.1.8 | INTEGER | read-write | Size of the Subaddress portion of an X.121 address |
| INT wfX25PadPortDefaultCfgLenUserData | 1.3.6.1.4.1.18.3.5.9.12.4.1.31 | INTEGER | read-write | Length of the user defined data |
| INT wfX25PadPortDefaultCfgNumber | 1.3.6.1.4.1.18.3.5.9.12.4.1.6 | INTEGER | read-only | Instance ID Async Port, filled in by ISDB mib gate |
| OCT wfX25PadPortDefaultCfgPacketSizeNegotiation | 1.3.6.1.4.1.18.3.5.9.12.4.1.37 | OCTET STRING | read-write | This facility, if subscribed to, will cause the DTE to request packet sizes for both directions of data transmission |
| OCT wfX25PadPortDefaultCfgRawFacilitiesData | 1.3.6.1.4.1.18.3.5.9.12.4.1.34 | OCTET STRING | read-write | User defined facilities filed represented in hexadecimal |
| OCT wfX25PadPortDefaultCfgReverseCharge | 1.3.6.1.4.1.18.3.5.9.12.4.1.35 | OCTET STRING | read-write | If subscribed to, authorizes the DCE to transmit to the DTE incoming calls which request the reverse charging facility. In absence of this facility the DCE will not transmit to the DTE incoming calls which request the reverse charging facility. |
| INT wfX25PadPortDefaultCfgSlot | 1.3.6.1.4.1.18.3.5.9.12.4.1.4 | INTEGER | read-only | Instance ID Slot, filled in by ISDB mib gate |
| INT wfX25PadPortDefaultCfgState | 1.3.6.1.4.1.18.3.5.9.12.4.1.3 | INTEGER | read-only | Current state of X.25 PAD sofware on the I-SDB |
| STR wfX25PadPortDefaultCfgSubAddress | 1.3.6.1.4.1.18.3.5.9.12.4.1.7 | DisplayString | read-write | Subaddress portion of an X.121 address that is used by an application and is transparent to the network |
| wfX25PadPortDefaultCfgTable | 1.3.6.1.4.1.18.3.5.9.12.4 | not-accessible | Table of X25 PAD Port Config Objects | |
| OCT wfX25PadPortDefaultCfgThruClassNegotiation | 1.3.6.1.4.1.18.3.5.9.12.4.1.36 | OCTET STRING | read-write | This facility, if subscribed to, allows negotiation on a per call basis of the throughput classes. The throughput classes are considered independently for each direction of data transmission. |
| OCT wfX25PadPortDefaultCfgUserData | 1.3.6.1.4.1.18.3.5.9.12.4.1.32 | OCTET STRING | read-write | User defined data field represented in hexadecimal |
| OCT wfX25PadPortDefaultCfgWindowSizeNegotiation | 1.3.6.1.4.1.18.3.5.9.12.4.1.38 | OCTET STRING | read-write | This facility, if subscribed to, will cause the DTE to request window sizes for both directions of data transmission |
| INT wfX25PadPortDefaultCfgX3break | 1.3.6.1.4.1.18.3.5.9.12.4.1.15 | INTEGER | read-write | Selection of operation of the PAD on receipt of the break signal |
| INT wfX25PadPortDefaultCfgX3Cdelete | 1.3.6.1.4.1.18.3.5.9.12.4.1.24 | INTEGER | read-write | Character delete |
| INT wfX25PadPortDefaultCfgX3CRpad | 1.3.6.1.4.1.18.3.5.9.12.4.1.17 | INTEGER | read-write | Padding after carriage return |
| INT wfX25PadPortDefaultCfgX3device | 1.3.6.1.4.1.18.3.5.9.12.4.1.13 | INTEGER | read-write | Ancillary device control |
| INT wfX25PadPortDefaultCfgX3discard | 1.3.6.1.4.1.18.3.5.9.12.4.1.16 | INTEGER | read-write | Discard output |
| INT wfX25PadPortDefaultCfgX3echo | 1.3.6.1.4.1.18.3.5.9.12.4.1.10 | INTEGER | read-write | PAD echo |
| INT wfX25PadPortDefaultCfgX3Edit | 1.3.6.1.4.1.18.3.5.9.12.4.1.23 | INTEGER | read-write | Editing |
| INT wfX25PadPortDefaultCfgX3escape | 1.3.6.1.4.1.18.3.5.9.12.4.1.9 | INTEGER | read-write | PAD recall using a character |
| INT wfX25PadPortDefaultCfgX3Esignals | 1.3.6.1.4.1.18.3.5.9.12.4.1.27 | INTEGER | read-write | Editing PAD service signals |
| INT wfX25PadPortDefaultCfgX3flow | 1.3.6.1.4.1.18.3.5.9.12.4.1.20 | INTEGER | read-write | Flow Control of the PAD by the start-stop mode DTE |
| INT wfX25PadPortDefaultCfgX3folding | 1.3.6.1.4.1.18.3.5.9.12.4.1.18 | INTEGER | read-write | Line folding |
| INT wfX25PadPortDefaultCfgX3forward | 1.3.6.1.4.1.18.3.5.9.12.4.1.11 | INTEGER | read-write | Selection of the data forwarding characters |
| INT wfX25PadPortDefaultCfgX3idle | 1.3.6.1.4.1.18.3.5.9.12.4.1.12 | INTEGER | read-write | Selection of the idle timer delay |
| INT wfX25PadPortDefaultCfgX3Ldelete | 1.3.6.1.4.1.18.3.5.9.12.4.1.25 | INTEGER | read-write | Line delete |
| INT wfX25PadPortDefaultCfgX3Ldisplay | 1.3.6.1.4.1.18.3.5.9.12.4.1.26 | INTEGER | read-write | Line display |
| INT wfX25PadPortDefaultCfgX3LFinsert | 1.3.6.1.4.1.18.3.5.9.12.4.1.21 | INTEGER | read-write | Linefeed insertion after carriage return |
| INT wfX25PadPortDefaultCfgX3LFpad | 1.3.6.1.4.1.18.3.5.9.12.4.1.22 | INTEGER | read-write | Linefeed padding |
| INT wfX25PadPortDefaultCfgX3Mask | 1.3.6.1.4.1.18.3.5.9.12.4.1.28 | INTEGER | read-write | Echo mask |
| INT wfX25PadPortDefaultCfgX3page | 1.3.6.1.4.1.18.3.5.9.12.4.1.30 | INTEGER | read-write | Page wait |
| INT wfX25PadPortDefaultCfgX3parity | 1.3.6.1.4.1.18.3.5.9.12.4.1.29 | INTEGER | read-write | Parity treatment |
| INT wfX25PadPortDefaultCfgX3signals | 1.3.6.1.4.1.18.3.5.9.12.4.1.14 | INTEGER | read-write | Control of PAD service signals |
| INT wfX25PadPortDefaultCfgX3speed | 1.3.6.1.4.1.18.3.5.9.12.4.1.19 | INTEGER | read-write | Binary speed |
| CTR wfX25PadPortStatConnections | 1.3.6.1.4.1.18.3.5.9.12.6.1.22 | Counter | read-only | Number of connections made |
| INT wfX25PadPortStatConnector | 1.3.6.1.4.1.18.3.5.9.12.6.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| CTR wfX25PadPortStatDisconnects | 1.3.6.1.4.1.18.3.5.9.12.6.1.23 | Counter | read-only | Number of disconnects made |
| INT wfX25PadPortStatDuration | 1.3.6.1.4.1.18.3.5.9.12.6.1.11 | INTEGER | read-only | Time in seconds of the call |
| wfX25PadPortStatEntry | 1.3.6.1.4.1.18.3.5.9.12.6.1 | not-accessible | An entry in the X25 Pad Port Stat Table | |
| INT wfX25PadPortStatLastCause | 1.3.6.1.4.1.18.3.5.9.12.6.1.24 | INTEGER | read-only | Last cause code |
| INT wfX25PadPortStatLastDiag | 1.3.6.1.4.1.18.3.5.9.12.6.1.25 | INTEGER | read-only | Last diag code |
| INT wfX25PadPortStatLCN | 1.3.6.1.4.1.18.3.5.9.12.6.1.10 | INTEGER | read-only | Current connection's logical channel number |
| INT wfX25PadPortStatNumber | 1.3.6.1.4.1.18.3.5.9.12.6.1.4 | INTEGER | read-only | Instance ID Async Port, filled in by ISDB mib gate |
| STR wfX25PadPortStatRemoteX121Addr | 1.3.6.1.4.1.18.3.5.9.12.6.1.9 | DisplayString | read-only | Remote X.121 address |
| CTR wfX25PadPortStatRxCall | 1.3.6.1.4.1.18.3.5.9.12.6.1.20 | Counter | read-only | Number of call request packets received |
| CTR wfX25PadPortStatRxClr | 1.3.6.1.4.1.18.3.5.9.12.6.1.16 | Counter | read-only | Number of call clear packets received |
| CTR wfX25PadPortStatRxOctets | 1.3.6.1.4.1.18.3.5.9.12.6.1.5 | Counter | read-only | Number of octets received on this async port |
| CTR wfX25PadPortStatRxPackets | 1.3.6.1.4.1.18.3.5.9.12.6.1.7 | Counter | read-only | Number of packets received on this async port |
| CTR wfX25PadPortStatRxReset | 1.3.6.1.4.1.18.3.5.9.12.6.1.18 | Counter | read-only | Number of reset packets received |
| CTR wfX25PadPortStatRxRNR | 1.3.6.1.4.1.18.3.5.9.12.6.1.14 | Counter | read-only | Number of receiver not ready packets received |
| CTR wfX25PadPortStatRxRR | 1.3.6.1.4.1.18.3.5.9.12.6.1.12 | Counter | read-only | Number of receiver ready packets received |
| INT wfX25PadPortStatSlot | 1.3.6.1.4.1.18.3.5.9.12.6.1.2 | INTEGER | read-only | Instance ID Slot, filled in by ISDB mib gate |
| INT wfX25PadPortStatState | 1.3.6.1.4.1.18.3.5.9.12.6.1.1 | INTEGER | read-only | Current state of X.25 PAD sofware on the I-SDB |
| wfX25PadPortStatTable | 1.3.6.1.4.1.18.3.5.9.12.6 | not-accessible | Table of X25 PAD Port Stat Objects | |
| CTR wfX25PadPortStatTxCall | 1.3.6.1.4.1.18.3.5.9.12.6.1.21 | Counter | read-only | Number of call request packets transmitted |
| CTR wfX25PadPortStatTxClr | 1.3.6.1.4.1.18.3.5.9.12.6.1.17 | Counter | read-only | Number of call clear packets transmitted |
| CTR wfX25PadPortStatTxOctets | 1.3.6.1.4.1.18.3.5.9.12.6.1.6 | Counter | read-only | Number of octets transmitted on this async port |
| CTR wfX25PadPortStatTxPackets | 1.3.6.1.4.1.18.3.5.9.12.6.1.8 | Counter | read-only | Number of packets transmitted on this async port |
| CTR wfX25PadPortStatTxReset | 1.3.6.1.4.1.18.3.5.9.12.6.1.19 | Counter | read-only | Number of reset packets transmitted |
| CTR wfX25PadPortStatTxRNR | 1.3.6.1.4.1.18.3.5.9.12.6.1.15 | Counter | read-only | Number of receiver not ready packets transmitted |
| CTR wfX25PadPortStatTxRR | 1.3.6.1.4.1.18.3.5.9.12.6.1.13 | Counter | read-only | Number of receiver ready packets transmitted |
| INT wfX25PadStatConnector | 1.3.6.1.4.1.18.3.5.9.12.3.1.3 | INTEGER | read-only | Instance ID Connector, filled in by ISDB mib gate. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 86 and 'connector' is defined in attribute 78 of this table. For non-ASN platforms this attribute is the physical connector number on the slot. |
| wfX25PadStatEntry | 1.3.6.1.4.1.18.3.5.9.12.3.1 | not-accessible | An entry in the X25 Pad Config Table | |
| CTR wfX25PadStatRxRestart | 1.3.6.1.4.1.18.3.5.9.12.3.1.9 | Counter | read-only | Number of restart packets received |
| CTR wfX25PadStatRxRNR | 1.3.6.1.4.1.18.3.5.9.12.3.1.7 | Counter | read-only | Number of receiver not ready packets received |
| CTR wfX25PadStatRxRR | 1.3.6.1.4.1.18.3.5.9.12.3.1.5 | Counter | read-only | Number of receiver ready packets received |
| INT wfX25PadStatSlot | 1.3.6.1.4.1.18.3.5.9.12.3.1.2 | INTEGER | read-only | Instance ID Slot, filled in by ISDB mib gate |
| INT wfX25PadStatState | 1.3.6.1.4.1.18.3.5.9.12.3.1.1 | INTEGER | read-only | Current state of X.25 PAD sofware on the I-SDB |
| wfX25PadStatTable | 1.3.6.1.4.1.18.3.5.9.12.3 | not-accessible | Table of X25 PAD Stat Objects | |
| CTR wfX25PadStatTotalConnCount | 1.3.6.1.4.1.18.3.5.9.12.3.1.4 | Counter | read-only | Total number of connections made to the X.25 Pad |
| CTR wfX25PadStatTxRestart | 1.3.6.1.4.1.18.3.5.9.12.3.1.10 | Counter | read-only | Number of restart packets transmitted |
| CTR wfX25PadStatTxRNR | 1.3.6.1.4.1.18.3.5.9.12.3.1.8 | Counter | read-only | Number of receiver not ready packets transmitted |
| CTR wfX25PadStatTxRR | 1.3.6.1.4.1.18.3.5.9.12.3.1.6 | Counter | read-only | Number of receiver ready packets transmitted |
RFC description
X.25 PAD configuration management including circuit assignment and address parameters.
Start monitoring Wellfleet/Bay Networks router with X.25 PAD interface (PAD-session/X.3-profile status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.