Wellfleet-SR-MIB

All MIBs › Wellfleet-SR-MIB

Category: Wellfleet BayNetworks LAN and Bridging

Description: Monitors Wellfleet source routing bridge parameters, route descriptors, and RIF table statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-SR-MIB?

Wellfleet-SR-MIB is a legacy vendor MIB from Wellfleet Communications (a bridge/router vendor later merged into Bay Networks/Nortel) for monitoring source-routing bridge behavior on Wellfleet routers/bridges. It exposes source-routing-specific data such as route descriptors and Routing Information Field (RIF) table statistics used in Token Ring source-route bridging environments. Its monitoring value is primarily around the software/protocol status of the bridging function: RIF table entries and route descriptor counts let an operator confirm source-route paths are being learned and used correctly, and spot anomalies like an exploding or stale RIF table indicating a bridging loop or misconfiguration. As a source-routing bridge MIB, it relates conceptually to the IEEE 802.5 Token Ring source-routing bridging standard rather than a specific IETF MIB, though no explicit dependency is shown in the available data. It was typically deployed in legacy Token Ring enterprise networks of the 1990s where Wellfleet routers/bridges performed source-route bridging between Token Ring segments. Engineers can download the Wellfleet-SR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-SR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet (Bay Networks) Token Ring source-routing bridge/router

Monitoring Examples

No object or table names were provided in this batch for this MIB, so an OID-grounded scenario cannot be constructed. Based on the short description, an admin would have polled RIF table entries and route descriptor counters to confirm source-routed paths were stable and to detect a growing/looping RIF table indicative of a bridging problem. Specific table and object names are not available to cite here.

What Can Be Monitored

route descriptor counts
RIF table statistics

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfBridgeGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfBrSourceRouting	1.3.6.1.4.1.18.3.5.1.1.2
wfBrSr	1.3.6.1.4.1.18.3.5.1.1.2.1
INT wfBrSrBaseDelete	1.3.6.1.4.1.18.3.5.1.1.2.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the bridge.
INT wfBrSrBaseDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the bridge.
INT wfBrSrBaseState	1.3.6.1.4.1.18.3.5.1.1.2.1.3	INTEGER	read-only	The current state of the SR bridge.
INT wfBrSrBaseInternalLanId	1.3.6.1.4.1.18.3.5.1.1.2.1.4	INTEGER	read-write	The SR bridge internal LAN ID
INT wfBrSrBaseBridgeId	1.3.6.1.4.1.18.3.5.1.1.2.1.5	INTEGER	read-write	The SR bridge Id
INT wfBrSrBaseGroupLanId	1.3.6.1.4.1.18.3.5.1.1.2.1.6	INTEGER	read-write	The SR bridge Group LAN ID
INT wfBrSrBaseIpEncapsDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.7	INTEGER	read-write	IP Encapsulation Enable/Disable
INT wfBrSrBaseIpNetworkRingId	1.3.6.1.4.1.18.3.5.1.1.2.1.8	INTEGER	read-write	The ring number of a connected IP network
CTR wfBrSrBaseIpInReceives	1.3.6.1.4.1.18.3.5.1.1.2.1.9	Counter	read-only	The number IP frames received by the network
CTR wfBrSrBaseIpSeqErrors	1.3.6.1.4.1.18.3.5.1.1.2.1.10	Counter	read-only	The number IP frames received by the network
INT wfBrSrBaseIpMtuSize	1.3.6.1.4.1.18.3.5.1.1.2.1.11	INTEGER	read-write	The mtu size in bytes to be negotiated for the IP network. This size will be converted to the LF code in the Route Control field
INT wfBrSrBaseNbServerRifCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.12	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Server rif cache
INT wfBrSrBaseNbClientRifCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.13	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Client rif cache
INT wfBrSrBaseNbDatagramRifCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.14	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Datagram rif cache
INT wfBrSrBaseNb15CharacterDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.15	INTEGER	read-write	Enable/Disable parameter for 15-character NetBIOS name caching
INT wfBrSrBaseNbRifMibDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.16	INTEGER	read-write	Enable/Disable creation of MIB instances for each cached name
INT wfBrSrBaseNbMaximumRifEntries	1.3.6.1.4.1.18.3.5.1.1.2.1.17	INTEGER	read-write	The maximum number of entries allowed in the NetBIOS server/client rif cache
INT wfBrSrBaseNbCurrentRifEntries	1.3.6.1.4.1.18.3.5.1.1.2.1.18	INTEGER	read-only	The number of entries currently in the NetBIOS server/client cache
INT wfBrSrBaseNbRifAgeTime	1.3.6.1.4.1.18.3.5.1.1.2.1.19	INTEGER	read-write	The age in seconds when inactive NetBIOS names will be aged out of the rif cache
INT wfBrSrBaseNbRifHashEntries	1.3.6.1.4.1.18.3.5.1.1.2.1.20	INTEGER	read-write	The number of entries in the RIF hash table
CTR wfBrSrBaseNbRifCacheHits	1.3.6.1.4.1.18.3.5.1.1.2.1.21	Counter	read-only	The number of times the NetBIOS rif cache has been used
CTR wfBrSrBaseNbRifCacheMisses	1.3.6.1.4.1.18.3.5.1.1.2.1.22	Counter	read-only	The number of failed lookups on the NetBIOS rif cache
CTR wfBrSrBaseNbRifDroppedFrames	1.3.6.1.4.1.18.3.5.1.1.2.1.23	Counter	read-only	The number of NB frames dropped because the rif stored in the rif cache indicated that this frame traveled a sub-optimal route
INT wfBrSrBaseNbQueryCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.24	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Query cache
INT wfBrSrBaseNbQueryMibDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.25	INTEGER	read-write	Enable/Disable creation of MIB instances for each cached query
INT wfBrSrBaseNbMaximumQueryEntries	1.3.6.1.4.1.18.3.5.1.1.2.1.26	INTEGER	read-write	The maximum number of entries allowed in the NetBIOS query cache
INT wfBrSrBaseNbCurrentQueryEntries	1.3.6.1.4.1.18.3.5.1.1.2.1.27	INTEGER	read-only	The number of entries currently in the NetBIOS query cache
INT wfBrSrBaseNbQueryAgeTime	1.3.6.1.4.1.18.3.5.1.1.2.1.28	INTEGER	read-write	The age in seconds when NetBIOS queries will be aged out of the query cache
CTR wfBrSrBaseNbQueryFilteredFrames	1.3.6.1.4.1.18.3.5.1.1.2.1.29	Counter	read-only	The number of duplicate NetBIOS queries filtered
INT wfBrSrBaseStpEnable	1.3.6.1.4.1.18.3.5.1.1.2.1.30	INTEGER	read-write	Spanning Tree Enable/Disable
INT wfBrSrBaseStpState	1.3.6.1.4.1.18.3.5.1.1.2.1.31	INTEGER	read-only	Spanning Tree State
INT wfBrSrBaseStpProtocolSpecification	1.3.6.1.4.1.18.3.5.1.1.2.1.32	INTEGER	read-write	The version of the Spanning Tree protocol being run
OCT wfBrSrBaseStpBridgeID	1.3.6.1.4.1.18.3.5.1.1.2.1.33	OCTET STRING	read-write	The Spanning Tree Bridge ID assigned to this bridge. It is a 8-octet string. The first two octets make up the bridge priority, and the last six are the MAC address of this bridge, which is commonly the MAC address of the first port on the bridge.
CTR wfBrSrBaseStpTimeSinceTopologyChange	1.3.6.1.4.1.18.3.5.1.1.2.1.34	Counter	read-only	The time (in hundredths of a second) since the last topology change was detected by the bridge.
CTR wfBrSrBaseStpTopChanges	1.3.6.1.4.1.18.3.5.1.1.2.1.35	Counter	read-only	The total number of topology changes detected by this bridge since it was last reset or initialized
OCT wfBrSrBaseStpDesignatedRoot	1.3.6.1.4.1.18.3.5.1.1.2.1.36	OCTET STRING	read-only	The bridge ID of the root of the Spanning Tree as determined by the Spanning Tree Protocol as executed by the bridge. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. It is a 8-octet string. The first two octets make up the priority, and the last six are the MAC address of the designated root bridge.
INT wfBrSrBaseStpRootCost	1.3.6.1.4.1.18.3.5.1.1.2.1.37	INTEGER	read-only	The cost of the path to the root as seen from this bridge.
INT wfBrSrBaseStpRootPort	1.3.6.1.4.1.18.3.5.1.1.2.1.38	INTEGER	read-only	The port identifier of the port which offers the lowest cost path from this bridge to the root bridge.
INT wfBrSrBaseStpMaxAge	1.3.6.1.4.1.18.3.5.1.1.2.1.39	INTEGER	read-only	The maximum age of the Spanning Tree Protocol information learned from the network on any port before it is discarded, in hundredths of a second. This represents the value actually in use by the bridge.
INT wfBrSrBaseStpHelloTime	1.3.6.1.4.1.18.3.5.1.1.2.1.40	INTEGER	read-only	The amount of time between transmission of configuration BPDUs by this bridge on any port, when it is the root of the Spanning Tree or trying to become so, in hundreths of a second. This represents the value actually in use by the bridge.
INT wfBrSrBaseStpHoldTime	1.3.6.1.4.1.18.3.5.1.1.2.1.41	INTEGER	read-only	The value that determines the interval length during which no more than two configuration BPDUs shall be transmitted by this bridge, in hundredths of a second.
INT wfBrSrBaseStpForwardDelay	1.3.6.1.4.1.18.3.5.1.1.2.1.42	INTEGER	read-only	The time, in hundredths of a second, that a port on this bridge will stay in a transitional state (e.g. LISTENING) before moving to the next state (e.g. LEARNING). This value is also used to age all dynamic entries in the Forwarding Database when a topology changed has been detected and is underway. This represents the value actually in use by the bridge.
INT wfBrSrBaseStpBridgeMaxAge	1.3.6.1.4.1.18.3.5.1.1.2.1.43	INTEGER	read-write	The value that all bridges use for MaxAge when this bridge acting as the root.
INT wfBrSrBaseStpBridgeHelloTime	1.3.6.1.4.1.18.3.5.1.1.2.1.44	INTEGER	read-write	The value that all bridges use for HelloTime when this bridge acting as the root.
INT wfBrSrBaseStpBridgeForwardDelay	1.3.6.1.4.1.18.3.5.1.1.2.1.45	INTEGER	read-write	The value that all bridges use for Forward Delay when this bridge acting as the root.
INT wfBrSrBaseNbNameQueryCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.1.46	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Name Query cache
INT wfBrSrBaseAreHopCntLimit	1.3.6.1.4.1.18.3.5.1.1.2.1.47	INTEGER	read-write	Based on hop count limit restrict AREs only(STEs still travel 7 hops) or restrict both AREs and STEs.
wfBrSrInterfaceTable	1.3.6.1.4.1.18.3.5.1.1.2.2		not-accessible	A table that contains information about every interface that is associated with this source routing bridge. inst_id[1] = wfBrSrInterfaceCircuit
wfBrSrInterfaceEntry	1.3.6.1.4.1.18.3.5.1.1.2.2.1		not-accessible	An entry in wfBrSrInterface.
INT wfBrSrInterfaceDelete	1.3.6.1.4.1.18.3.5.1.1.2.2.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an interface.
INT wfBrSrInterfaceDisable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface.
INT wfBrSrInterfaceState	1.3.6.1.4.1.18.3.5.1.1.2.2.1.3	INTEGER	read-only	The current state of the interface.
INT wfBrSrInterfaceCircuit	1.3.6.1.4.1.18.3.5.1.1.2.2.1.4	INTEGER	read-only	The circuit that this interface runs over.
INT wfBrSrInterfaceMaxRds	1.3.6.1.4.1.18.3.5.1.1.2.2.1.5	INTEGER	read-write	The maximum number of RDs permitted in incoming explorer frames
INT wfBrSrInterfaceRing	1.3.6.1.4.1.18.3.5.1.1.2.2.1.6	INTEGER	read-write	The ring number of the source routing circuit. Even non-ring circuit need a ring number if it is to do source routing
INT wfBrSrInterfaceBlockOutSte	1.3.6.1.4.1.18.3.5.1.1.2.2.1.7	INTEGER	read-write	Enables blocking of outbound STEs
INT wfBrSrInterfaceBlockInSte	1.3.6.1.4.1.18.3.5.1.1.2.2.1.8	INTEGER	read-write	Enables blocking of inbound STEs
INT wfBrSrInterfaceBlockIp	1.3.6.1.4.1.18.3.5.1.1.2.2.1.9	INTEGER	read-write	Enables blocking of inbound explorers that have have already been through the IP network
IP wfBrSrInterfaceIpAddress	1.3.6.1.4.1.18.3.5.1.1.2.2.1.10	IpAddress	read-write	Ip address for this ring. This should match the the IP address in the IP MIB
CTR wfBrSrInterfaceInFrames	1.3.6.1.4.1.18.3.5.1.1.2.2.1.11	Counter	read-only	The number of frames that have been received by this interface from its circuit.
CTR wfBrSrInterfaceOutFrames	1.3.6.1.4.1.18.3.5.1.1.2.2.1.12	Counter	read-only	The number of frames that have been transmitted by this interface
CTR wfBrSrInterfaceOutIpFrames	1.3.6.1.4.1.18.3.5.1.1.2.2.1.13	Counter	read-only	The number of frames that have been transmitted by this interface to the IP network
CTR wfBrSrInterfaceDropInvalidRcs	1.3.6.1.4.1.18.3.5.1.1.2.2.1.14	Counter	read-only	Count of frames received which were discarded because of a bad Route Control field
CTR wfBrSrInterfaceDropInvalidRings	1.3.6.1.4.1.18.3.5.1.1.2.2.1.15	Counter	read-only	Count of frames received which were discarded because of a invalid incoming ring
CTR wfBrSrInterfaceDropSrfs	1.3.6.1.4.1.18.3.5.1.1.2.2.1.16	Counter	read-only	Count of specifically routed frames received which were discarded due to filtering or no next circuit
INT wfBrSrInterfaceNbServerRifCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.17	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Server cache
INT wfBrSrInterfaceNbClientRifCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.18	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Client cache
INT wfBrSrInterfaceNbDatagramRifCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.19	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Datagram cache
INT wfBrSrInterfaceNbQueryCacheDisable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.20	INTEGER	read-write	Enable/Disable parameter for the NetBIOS Query cache
CTR wfBrSrInterfaceXbInFrames	1.3.6.1.4.1.18.3.5.1.1.2.2.1.21	Counter	read-only	The number of frames that have been received by this interface
CTR wfBrSrInterfaceXbDropFrames	1.3.6.1.4.1.18.3.5.1.1.2.2.1.22	Counter	read-only	The number of frames that were dropped because they were too large
INT wfBrSrInterfaceFrBcastDlci	1.3.6.1.4.1.18.3.5.1.1.2.2.1.23	INTEGER	read-write	The Frame Relay broadcast dlci
INT wfBrSrInterfaceEncapsFormat	1.3.6.1.4.1.18.3.5.1.1.2.2.1.24	INTEGER	read-write	Non-Token Ring encapsulation format
INT wfBrSrInterfaceStpEnable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.25	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable an interface for the Spanning Tree.
INT wfBrSrInterfaceStpState	1.3.6.1.4.1.18.3.5.1.1.2.2.1.26	INTEGER	read-only	The current state of the port as defined by the application of the Spanning Tree Protocol.
OCT wfBrSrInterfaceStpMultiCastAddr	1.3.6.1.4.1.18.3.5.1.1.2.2.1.27	OCTET STRING	read-only	The MAC address used as the destination for all BPDU packets generated out this port.
INT wfBrSrInterfaceStpPathCost	1.3.6.1.4.1.18.3.5.1.1.2.2.1.28	INTEGER	read-write	The contribution of this port the root path cost of paths toward the Spanning Tree root which include this port.
OCT wfBrSrInterfaceStpDesignatedRoot	1.3.6.1.4.1.18.3.5.1.1.2.2.1.29	OCTET STRING	read-only	The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which this port is attached. Bridge IDs are made up of a 2-byte priority field, and a 6-byte MAC address.
INT wfBrSrInterfaceStpDesignatedCost	1.3.6.1.4.1.18.3.5.1.1.2.2.1.30	INTEGER	read-only	The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
OCT wfBrSrInterfaceStpDesignatedBridge	1.3.6.1.4.1.18.3.5.1.1.2.2.1.31	OCTET STRING	read-only	The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
INT wfBrSrInterfaceStpDesignatedPort	1.3.6.1.4.1.18.3.5.1.1.2.2.1.32	INTEGER	read-only	The Port Identifier of the port on the Designated Bridge for this port's segment.
CTR wfBrSrInterfaceStpForwardTransitions	1.3.6.1.4.1.18.3.5.1.1.2.2.1.33	Counter	read-only	The number of times this port has transitioned from the Learning State to the Forwarding state.
CTR wfBrSrInterfaceStpPktsXmitd	1.3.6.1.4.1.18.3.5.1.1.2.2.1.34	Counter	read-only	The number of BPDU packets transmitted out this port
CTR wfBrSrInterfaceStpPktsRcvd	1.3.6.1.4.1.18.3.5.1.1.2.2.1.35	Counter	read-only	The number of BPDU packets transmitted out this port
INT wfBrSrInterfaceStpTranslationDisable	1.3.6.1.4.1.18.3.5.1.1.2.2.1.36	INTEGER	read-write	Enable/Disable translation bridging parameter. Default is disabled.
INT wfBrSrInterfaceMaxLfField	1.3.6.1.4.1.18.3.5.1.1.2.2.1.37	INTEGER	read-write	The maximum size of the Lf Field. This was added to restrict the packet size when using FDDI. Note: The BR_SR_INTERFACE_SR4472 setting is for IBM use only. This packet size is not normally supported on the FDDI. The default setting is for IBM. This will need to be set to 1 or 2 for all other vendors.
INT wfBrSrInterfaceFilterAddress	1.3.6.1.4.1.18.3.5.1.1.2.2.1.38	INTEGER	read-write	Selection of Filter Address type when filtering SRF's. Filtering can be performed on the Wellfleet Group Address or on the Destination Address in the frame.
wfBrSrBridgeTable	1.3.6.1.4.1.18.3.5.1.1.2.3		not-accessible	A table that contains the bridge numbers used by Wellfleet bridges in a source routing network inst_id[2] = wfBrSrBridgeId
wfBrSrBridgeEntry	1.3.6.1.4.1.18.3.5.1.1.2.3.1		not-accessible	An entry in wfBrSrBridge.
INT wfBrSrBridgeDelete	1.3.6.1.4.1.18.3.5.1.1.2.3.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an IP encapsulation peer record.
INT wfBrSrBridgeId	1.3.6.1.4.1.18.3.5.1.1.2.3.1.2	INTEGER	read-only	The Bridge Id reserved for Wellfleet bridges
wfBrSrIpExplorerTable	1.3.6.1.4.1.18.3.5.1.1.2.4		not-accessible	A table that contains the table of IP addresses to which source routing explorers should be sent inst_id[2] = wfBrSrIpExplorerAddress
wfBrSrIpExplorerEntry	1.3.6.1.4.1.18.3.5.1.1.2.4.1		not-accessible	An entry in wfBrSrIpExplorer.
INT wfBrSrIpExplorerDelete	1.3.6.1.4.1.18.3.5.1.1.2.4.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete an IP encapsulation peer record.
IP wfBrSrIpExplorerAddr	1.3.6.1.4.1.18.3.5.1.1.2.4.1.2	IpAddress	read-only	The IP address of this encapsulation peer.
INT wfBrSrIpExplorerProtocol	1.3.6.1.4.1.18.3.5.1.1.2.4.1.3	INTEGER	read-write	Which IP Encaps protocols to use, 0 = old, 1 = new. The value 1 = new is no longer valid.
wfBrSrIpEncapsTable	1.3.6.1.4.1.18.3.5.1.1.2.5		not-accessible	A table that contains information about IP Encapsulation ring-to-IP Address mappings. This information is used to make the 'next ring' IP Address decision. inst = wfBrSrIpEncapsRing
wfBrSrIpEncapsEntry	1.3.6.1.4.1.18.3.5.1.1.2.5.1		not-accessible	An entry in the wfBrSrIpEncapsTable.
INT wfBrSrIpEncapsRing	1.3.6.1.4.1.18.3.5.1.1.2.5.1.1	INTEGER	read-only	The remote ring number for which we have a ring to IP Address mapping.
IP wfBrSrIpEncapsIpAddress	1.3.6.1.4.1.18.3.5.1.1.2.5.1.2	IpAddress	read-only	The IP Address of the Wellfleet IP Encapsulation peer to which this ring is connected.
INT wfBrSrIpEncapsStatus	1.3.6.1.4.1.18.3.5.1.1.2.5.1.3	INTEGER	read-only	The status of this entry. The meanings of the values are: learned(3) : the value of the corresponding instance of wfBrSrIpEncapsRing was learned, and is being used.
wfBrSrTrafficFilterTable	1.3.6.1.4.1.18.3.5.1.1.2.6		not-accessible	SR Bridge Traffic Filters
wfBrSrTrafficFilterEntry	1.3.6.1.4.1.18.3.5.1.1.2.6.1		not-accessible	An entry in WfBrSrTrafficFilterTable.
INT wfBrSrTrafficFilterCreate	1.3.6.1.4.1.18.3.5.1.1.2.6.1.1	INTEGER	read-write	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
INT wfBrSrTrafficFilterEnable	1.3.6.1.4.1.18.3.5.1.1.2.6.1.2	INTEGER	read-write	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
INT wfBrSrTrafficFilterStatus	1.3.6.1.4.1.18.3.5.1.1.2.6.1.3	INTEGER	read-only	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule.
CTR wfBrSrTrafficFilterCounter	1.3.6.1.4.1.18.3.5.1.1.2.6.1.4	Counter	read-only	The number of received packets that have matched this rule.
OCT wfBrSrTrafficFilterDefinition	1.3.6.1.4.1.18.3.5.1.1.2.6.1.5	OCTET STRING	read-write	The filter rule definition.
INT wfBrSrTrafficFilterReserved	1.3.6.1.4.1.18.3.5.1.1.2.6.1.6	INTEGER	read-only	Reserved field.
INT wfBrSrTrafficFilterCircuit	1.3.6.1.4.1.18.3.5.1.1.2.6.1.7	INTEGER	read-only	The ID of the Bridge Circuit to which the filter is applied.
INT wfBrSrTrafficFilterRuleNumber	1.3.6.1.4.1.18.3.5.1.1.2.6.1.8	INTEGER	read-only	ID for the rule.
INT wfBrSrTrafficFilterFragment	1.3.6.1.4.1.18.3.5.1.1.2.6.1.9	INTEGER	read-only	Fragment number - for large rules.
STR wfBrSrTrafficFilterName	1.3.6.1.4.1.18.3.5.1.1.2.6.1.10	DisplayString	read-write	name of the rule number
wfBrSrEsRifTable	1.3.6.1.4.1.18.3.5.1.1.2.7		not-accessible	A table that contains the currently active RIFs in use by Router End Station Support inst_id[9] = wfBrSrIpExplorerAddress
wfBrSrEsRifEntry	1.3.6.1.4.1.18.3.5.1.1.2.7.1		not-accessible	An entry in wfBrSrEsRif.
INT wfBrSrEsRifCircuit	1.3.6.1.4.1.18.3.5.1.1.2.7.1.1	INTEGER	read-only	The circuit on which this entry was learned
OCT wfBrSrEsRifProtocol	1.3.6.1.4.1.18.3.5.1.1.2.7.1.2	OCTET STRING	read-only	The protocol in use at end station corresponding to this RIF. If the protocol uses LLC encapsulation this field will contain the DSAP/SSAP pair. If a SNAP encapsulation is used, it will contain the protocol type.
OCT wfBrSrEsRifMacAddr	1.3.6.1.4.1.18.3.5.1.1.2.7.1.3	OCTET STRING	read-only	The Mac address of the end station corresponding to this RIF.
OCT wfBrSrEsRifRoute	1.3.6.1.4.1.18.3.5.1.1.2.7.1.4	OCTET STRING	read-only	The route contained in the RIF field
wfBrSrNbRifTable	1.3.6.1.4.1.18.3.5.1.1.2.8		not-accessible	The NetBIOS server/client rif cache table
wfBrSrNbRifEntry	1.3.6.1.4.1.18.3.5.1.1.2.8.1		not-accessible	An entry in the NetBIOS rif cache table
OCT wfBrSrNbName	1.3.6.1.4.1.18.3.5.1.1.2.8.1.1	OCTET STRING	read-only	The NetBIOS name of this station. It is a maximum of 16 characters. Names that are shorter are padded with ASCII spaces - 0x20
OCT wfBrSrNbMacAddress	1.3.6.1.4.1.18.3.5.1.1.2.8.1.2	OCTET STRING	read-only	The Mac Address of the NetBIOS station
INT wfBrSrNbStatic	1.3.6.1.4.1.18.3.5.1.1.2.8.1.3	INTEGER	read-only	Indicates whether this entry is a static or learned entry
OCT wfBrSrNbRif	1.3.6.1.4.1.18.3.5.1.1.2.8.1.4	OCTET STRING	read-only	Cached RIF to get to this station
CTR wfBrSrNbRifCacheHits	1.3.6.1.4.1.18.3.5.1.1.2.8.1.5	Counter	read-only	The number of AREs that have been converted by this station
wfBrSrNbQueryTable	1.3.6.1.4.1.18.3.5.1.1.2.9		not-accessible	The NetBIOS Query cache table
wfBrSrNbQueryEntry	1.3.6.1.4.1.18.3.5.1.1.2.9.1		not-accessible	An entry in the NetBIOS Query cache table
OCT wfBrSrNbQueryMacAddress	1.3.6.1.4.1.18.3.5.1.1.2.9.1.1	OCTET STRING	read-only	The MAC Address of the NetBIOS station
INT wfBrSrNbRspCorrelator	1.3.6.1.4.1.18.3.5.1.1.2.9.1.2	INTEGER	read-only	NetBIOS query sequence number
OCT wfBrSrNbQuery	1.3.6.1.4.1.18.3.5.1.1.2.9.1.3	OCTET STRING	read-only	Cached NetBIOS query
CTR wfBrSrNbQueryFilteredFrames	1.3.6.1.4.1.18.3.5.1.1.2.9.1.4	Counter	read-only	The number of identical Queries which have been filtered
wfBrSrNbStaticTable	1.3.6.1.4.1.18.3.5.1.1.2.10		not-accessible	The NetBIOS static server/client entry table
wfBrSrNbStaticEntry	1.3.6.1.4.1.18.3.5.1.1.2.10.1		not-accessible	An entry in the NetBIOS static entry table
INT wfBrSrNbStaticDelete	1.3.6.1.4.1.18.3.5.1.1.2.10.1.1	INTEGER	read-write	Create/Delete parameter for the NetBIOS static entry
INT wfBrSrNbStaticDisable	1.3.6.1.4.1.18.3.5.1.1.2.10.1.2	INTEGER	read-write	Enable/Disable parameter for the NetBIOS static entry
INT wfBrSrNbStaticState	1.3.6.1.4.1.18.3.5.1.1.2.10.1.3	INTEGER	read-only	The state of this NetBIOS static entry
OCT wfBrSrNbStaticName	1.3.6.1.4.1.18.3.5.1.1.2.10.1.4	OCTET STRING	read-only	The NetBIOS name of this station. It is a maximum of 16 characters. Names that are shorter are padded with ASCII spaces - 0x20
OCT wfBrSrNbStaticMacAddress	1.3.6.1.4.1.18.3.5.1.1.2.10.1.5	OCTET STRING	read-write	The Mac Address of the NetBIOS station
OCT wfBrSrNbStaticRif	1.3.6.1.4.1.18.3.5.1.1.2.10.1.6	OCTET STRING	read-write	The RIF to get to this station
wfBrXb	1.3.6.1.4.1.18.3.5.1.1.2.11
INT wfBrXbBaseDelete	1.3.6.1.4.1.18.3.5.1.1.2.11.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete the bridge.
INT wfBrXbBaseDisable	1.3.6.1.4.1.18.3.5.1.1.2.11.2	INTEGER	read-write	Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable the bridge.
INT wfBrXbBaseEthernetLanId	1.3.6.1.4.1.18.3.5.1.1.2.11.3	INTEGER	read-write	Ethernet pseudo 'Ring' number
INT wfBrXbBaseMaxRifEntries	1.3.6.1.4.1.18.3.5.1.1.2.11.4	INTEGER	read-write	Maximum number of entries in the token-ring station address/RIF database
INT wfBrXbBaseCurrentRifEntries	1.3.6.1.4.1.18.3.5.1.1.2.11.5	INTEGER	read-only	Current number of entries in the token-ring station address/RIF database
INT wfBrXbBaseAgeTime	1.3.6.1.4.1.18.3.5.1.1.2.11.6	INTEGER	read-write	Aging values for token-ring and Ethernet/802.3 MAC address databases
INT wfBrXbBaseBcastAddressConversionDisable	1.3.6.1.4.1.18.3.5.1.1.2.11.7	INTEGER	read-write	Enable/disable conversion from Ethernet Broadcast address to Token-ring broadcast address
INT wfBrXbBaseDefaultMode	1.3.6.1.4.1.18.3.5.1.1.2.11.8	INTEGER	read-write	default mode indicates whether nodes should be assumed to be Ethernet version 2 or 802.3 nodes, if no other information is available. This parameter applies to Ethernet/802.3 interfaces only.
INT wfBrXbBaseBcastMode	1.3.6.1.4.1.18.3.5.1.1.2.11.9	INTEGER	read-write	this parameter governs whether frames to be broadcast on the token-ring interface (because the destination address was not recognized) should go out as All-routes-explorers or as Spanning-tree-explorers. This parameter applies to token-ring interfaces only.
OCT wfBrXbBaseSaps	1.3.6.1.4.1.18.3.5.1.1.2.11.10	OCTET STRING	read-write	this parameter is the list of SAPS to bridge
INT wfBrXbFddiBridge	1.3.6.1.4.1.18.3.5.1.1.2.11.11	INTEGER	read-write	Enable/disable larger size packets (FDDI and TokenRing) to pass through the bridge if no ethernet or sync ports are configured for XB.
wfBrXbAddressMapTable	1.3.6.1.4.1.18.3.5.1.1.2.12		not-accessible	users may configure specific FunctionalMulticast address conversions or specific MAC address conversions to be performed. This table keeps these mappings (on a per-system basis).
wfBrXbAddressMapEntry	1.3.6.1.4.1.18.3.5.1.1.2.12.1		not-accessible	An entry in the MAC address mapping table
INT wfBrXbAddressMapDelete	1.3.6.1.4.1.18.3.5.1.1.2.12.1.1	INTEGER	read-write	Create/Delete parameter for the station type static entry
OCT wfBrXbAddressMapEthernetAddress	1.3.6.1.4.1.18.3.5.1.1.2.12.1.2	OCTET STRING	read-only	The ethernet MAC Address of the station
OCT wfBrXbAddressMapTokenRingAddress	1.3.6.1.4.1.18.3.5.1.1.2.12.1.3	OCTET STRING	read-write	The token-ring MAC Address of the station
wfBrXbRifTable	1.3.6.1.4.1.18.3.5.1.1.2.13		not-accessible	The token-ring RIF cache table
wfBrXbRifEntry	1.3.6.1.4.1.18.3.5.1.1.2.13.1		not-accessible	An entry in the token-ring RIF cache table
OCT wfBrXbRifMacAddress	1.3.6.1.4.1.18.3.5.1.1.2.13.1.1	OCTET STRING	read-only	The Mac Address of the token-ring station
OCT wfBrXbRifField	1.3.6.1.4.1.18.3.5.1.1.2.13.1.2	OCTET STRING	read-only	The RIF to get to this station
wfBrXbStationTypeTable	1.3.6.1.4.1.18.3.5.1.1.2.14		not-accessible	The station type (Ethernet or 802.3) static entry table
wfBrXbStationTypeEntry	1.3.6.1.4.1.18.3.5.1.1.2.14.1		not-accessible	An entry in the station type static entry table
INT wfBrXbStationTypeDelete	1.3.6.1.4.1.18.3.5.1.1.2.14.1.1	INTEGER	read-write	Create/Delete parameter for the station type static entry
OCT wfBrXbStationTypeEthernetAddress	1.3.6.1.4.1.18.3.5.1.1.2.14.1.2	OCTET STRING	read-only	The Mac Address of the station
INT wfBrXbStationTypeIndicator	1.3.6.1.4.1.18.3.5.1.1.2.14.1.3	INTEGER	read-write	The station type (Ethernet or 802.3)
wfBrSrIpEncapsRBTable	1.3.6.1.4.1.18.3.5.1.1.2.15		not-accessible	A table that contains information about IP Encapsulation ring/bridge-to-IP Address mappings. This information is used to make the 'next ring/bridge' IP Address decision. inst = wfBrSrIpEncapsRing.wfBrSrIpEncapsBridge
wfBrSrIpEncapsRBEntry	1.3.6.1.4.1.18.3.5.1.1.2.15.1		not-accessible	An entry in the wfBrSrIpEncapsRBTable.
INT wfBrSrIpEncapsRBRing	1.3.6.1.4.1.18.3.5.1.1.2.15.1.1	INTEGER	read-only	The remote ring number for which we have a ring-bridge to IP Address mapping.
INT wfBrSrIpEncapsRBBridge	1.3.6.1.4.1.18.3.5.1.1.2.15.1.2	INTEGER	read-only	The Bridge ID for which we have a ring-bridge to IP Address mapping.
IP wfBrSrIpEncapsRBIpAddress	1.3.6.1.4.1.18.3.5.1.1.2.15.1.3	IpAddress	read-only	The IP Address of the Wellfleet IP Encapsulation peer to which this ring-bridge is connected.
INT wfBrSrIpEncapsRBStatus	1.3.6.1.4.1.18.3.5.1.1.2.15.1.4	INTEGER	read-only	The status of this entry. The meanings of the values are: learned(3) : the value of the corresponding instance of wfBrSrIpEncapsRing and wfBrSrIpEncapsBridge was learned, and is being used.

RFC description

Wellfleet source routing bridge MIB for managing SR bridge configuration and token ring bridging.

Start monitoring Wellfleet (Bay Networks) Token Ring source-routing bridge/router (RIF-table/route-descriptor status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-SR-MIB

What Is Wellfleet-SR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description