Wellfleet-LLC-MIB

All MIBs › Wellfleet-LLC-MIB

Category: Wellfleet BayNetworks LAN and Bridging

Description: Manages Wellfleet IEEE 802.2 LLC protocol parameters, SAP bindings, and connection statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-LLC-MIB?

Wellfleet-LLC-MIB is a legacy Wellfleet/Bay Networks proprietary MIB (built on the shared Wellfleet-COMMON-MIB SMI) implementing LLC (IEEE 802.2 Logical Link Control, Type 1 and Type 2) on Wellfleet/Bay Networks routers. Its objects cover base and per-interface create/delete/disable/state controls tied to a circuit, LLC1 max-info-size/max-retry/ack-wait-timer settings, and LLC2 window size (k), N2/N3 retry counts, and ack-wait/reject/remote-busy/response-ack/idle/poll-cycle timers, following the vendor's standard create/delete/disable pattern for dynamically-loaded software modules. As a configuration/status MIB it lets an administrator confirm whether LLC (IEEE 802.2 Logical Link Control, Type 1 and Type 2) is loaded/enabled and audit its configuration. It is deployed on legacy Wellfleet/Bay Networks routers. Engineers can download the Wellfleet-LLC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-LLC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Wellfleet/Bay Networks routers

Monitoring Examples

An administrator checks whether LLC (IEEE 802.2 Logical Link Control, Type 1 and Type 2) has been created and enabled on a legacy Wellfleet router before troubleshooting a feature that depends on it.

What Can Be Monitored

LLC (IEEE 802.2 Logical Link Control, Type 1 and Type 2) load/enable state and configuration

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfLlcGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfLlc	1.3.6.1.4.1.18.3.5.1.6.1
INT wfLlcBaseDelete	1.3.6.1.4.1.18.3.5.1.6.1.1	INTEGER	read-write	- Create/Delete parameter. Default is created. - Users perform an SNMP SET operation on this - object in order to create/delete LLC.
INT wfLlcBaseDisable	1.3.6.1.4.1.18.3.5.1.6.1.2	INTEGER	read-write	- Enable/Disable parameter. Default is disabled. - Users perform an SNMP SET operation on this - object in order to enable/disable LLC.
INT wfLlcBaseState	1.3.6.1.4.1.18.3.5.1.6.1.3	INTEGER	read-only	- The current state of LLC service
wfLlcInterfaceTable	1.3.6.1.4.1.18.3.5.1.6.2		not-accessible	A table that contains information about every interface that is associated with this LLC
wfLlcInterfaceEntry	1.3.6.1.4.1.18.3.5.1.6.2.1		not-accessible	An entry in wfLlcInterface.
INT wfLlcInterfaceDelete	1.3.6.1.4.1.18.3.5.1.6.2.1.1	INTEGER	read-write	- Create/Delete parameter. Default is created. - Users perform an SNMP SET operation on this - object in order to create/delete an interface.
INT wfLlcInterfaceDisable	1.3.6.1.4.1.18.3.5.1.6.2.1.2	INTEGER	read-write	- - Enable/Disable parameter. Default is enabled. - Users perform an SNMP SET operation on this - object in order to enable/disable an interface.
INT wfLlcInterfaceState	1.3.6.1.4.1.18.3.5.1.6.2.1.3	INTEGER	read-only	The current state of the interface.
INT wfLlcInterfaceCircuit	1.3.6.1.4.1.18.3.5.1.6.2.1.4	INTEGER	read-only	The llc1 circuit of this interface.
INT wfLlcInterfaceLlc2CctId	1.3.6.1.4.1.18.3.5.1.6.2.1.5	INTEGER	read-write	The llc2 circuit number assigned for this slot, line, and llc1 cct.
INT wfLlc1InterfaceMaxUinfoSize	1.3.6.1.4.1.18.3.5.1.6.2.1.6	INTEGER	read-write	- Maximum number of octets in UI PDU.
INT wfLlc1InterfaceMaxRetry	1.3.6.1.4.1.18.3.5.1.6.2.1.7	INTEGER	read-write	- Maximum retry limit. Specifeis the - maximum number of times that an XID - or TEST command PDU is sent following - the running out of the response timer - TResponse
INT wfLlc1InterfaceTAckWait	1.3.6.1.4.1.18.3.5.1.6.2.1.8	INTEGER	read-write	- The amount of time during which the - LLC shall expect to receive an - an acknowledgment to a sent unnumbered - XID or TEST command PDU - time in seconds
INT wfLlc2InterfaceMaxInfoSize	1.3.6.1.4.1.18.3.5.1.6.2.1.9	INTEGER	read-write	- Max number of octets in an I Pdu
INT wfLlc2InterfaceK	1.3.6.1.4.1.18.3.5.1.6.2.1.10	INTEGER	read-write	- The wfLlc2InterfaceK parameter is no longer used. - It is replaced by the send window (wfLlc2InterfaceTW) - and the receive window (wfLlc2InterfaceRW) parameters.
INT wfLlc2InterfaceN2	1.3.6.1.4.1.18.3.5.1.6.2.1.11	INTEGER	read-write	- Maximum number of transmissions. This specifies the - max number of times that a PDU is sent following the - elapse of the .. - acknowledgment timer - poll timer - reject timer
INT wfLlc2InterfaceN3	1.3.6.1.4.1.18.3.5.1.6.2.1.12	INTEGER	read-write	- Maximum number of received I PDUs before - sending a local acknowledgment to the - transmitter
INT wfLlc2InterfaceTAckWait	1.3.6.1.4.1.18.3.5.1.6.2.1.13	INTEGER	read-write	- Acknowledment timer for TX window - rotation - time in seconds
INT wfLlc2InterfaceTReject	1.3.6.1.4.1.18.3.5.1.6.2.1.14	INTEGER	read-write	- Reject Timer - time in seconds
INT wfLlc2InterfaceTRemoteBusy	1.3.6.1.4.1.18.3.5.1.6.2.1.15	INTEGER	read-write	- busy state timer - time in seconds
INT wfLlc2InterfaceTRspAck	1.3.6.1.4.1.18.3.5.1.6.2.1.16	INTEGER	read-write	- Local response timer for remote TX - window rotation - response in seconds
INT wfLlc2InterfaceTIdle	1.3.6.1.4.1.18.3.5.1.6.2.1.17	INTEGER	read-write	- Idle timer - in seconds
INT wfLlc2InterfaceTPollCycle	1.3.6.1.4.1.18.3.5.1.6.2.1.18	INTEGER	read-write	- P/F bit cycle timer (link activity) - time in secs
INT wfLlcInterfaceMaxNumOfSap	1.3.6.1.4.1.18.3.5.1.6.2.1.19	INTEGER	read-write	- maximum number of saps per LLC service - Max = 255 and Min = 4
INT wfLlcInterfaceMaxNumOfLink	1.3.6.1.4.1.18.3.5.1.6.2.1.20	INTEGER	read-write	- Maximum number of end to end connections - per LLC service - Max = 5000 and Min = 4 Default:5000
INT wfLlcInterfaceDupAddrCheck	1.3.6.1.4.1.18.3.5.1.6.2.1.21	INTEGER	read-write	- Flag to force duplicate address check - Default is DISABLED
INT wfLlc2InterfaceRW	1.3.6.1.4.1.18.3.5.1.6.2.1.22	INTEGER	read-write	- Maximum number of outstanding ( = unacknowledged) - receive I PDUs. This cannot exceed 127.
INT wfLlc2InterfaceTW	1.3.6.1.4.1.18.3.5.1.6.2.1.23	INTEGER	read-write	- Maximum number of outstanding ( = unacknowledged) - transmit I PDUs. This cannot exceed 127. - This value acts as a default window size, when no other - window size has been agreed upon through - an XID3 exchange procedure.
INT wfLlcInterfaceEncapsType	1.3.6.1.4.1.18.3.5.1.6.2.1.24	INTEGER	read-write	This indicates which encapsulation technique should be used by LLC.
INT wfLlcInterfaceSrbRingId	1.3.6.1.4.1.18.3.5.1.6.2.1.25	INTEGER	read-write	This indicates a ring number to be used by LLC if the encapsulation technique is SRB. It must be unique in the SRB network.
OCT wfLlcInterfaceFrVMask	1.3.6.1.4.1.18.3.5.1.6.2.1.26	OCTET STRING	read-write	- LLC Frame Relay Virtual Mac Address Mask. - This Mask specifies the upper 2-4 bytes of the - destination mac address. The lower remaining - bytes specifies the DLCI to be used.
INT wfLlc2InterfaceDynWin	1.3.6.1.4.1.18.3.5.1.6.2.1.27	INTEGER	read-write	- Enable/Disable dynamic window. The default is enabled.
INT wfLlcInterfaceCurrentLinks	1.3.6.1.4.1.18.3.5.1.6.2.1.28	INTEGER	read-only	The number of links on this interface.
INT wfLlcInterfaceHiWaterLinks	1.3.6.1.4.1.18.3.5.1.6.2.1.29	INTEGER	read-only	The highest number of links present at one time on this interface.
INT wfLlcInterfaceHiWaterReset	1.3.6.1.4.1.18.3.5.1.6.2.1.30	INTEGER	read-write	Setting to 2 (reset) sets HiWaterLinks to CurrentLinks.
INT wfLlcInterfaceFrSapTranslation	1.3.6.1.4.1.18.3.5.1.6.2.1.31	INTEGER	read-write	Enables SMAC SSAP translation for FR to pass multiple SMACs over one VC
wfLlcSapTable	1.3.6.1.4.1.18.3.5.1.6.3		not-accessible	- llc sap table
wfLlcSapEntry	1.3.6.1.4.1.18.3.5.1.6.3.1		not-accessible	An entry in wfLlcSapTable.
INT wfLlcSapCircuit	1.3.6.1.4.1.18.3.5.1.6.3.1.1	INTEGER	read-only	- The llc1 circuit that this sap is on
INT wfLlcSapValue	1.3.6.1.4.1.18.3.5.1.6.3.1.2	INTEGER	read-only	- Sap Value
wfLlcLinkTable	1.3.6.1.4.1.18.3.5.1.6.4		not-accessible	- Link table, indexed by slot, circuit, da, sa, dsap, ssap
wfLlcLinkEntry	1.3.6.1.4.1.18.3.5.1.6.4.1		not-accessible	An entry in wfLlcLinkTable.
INT wfLlcLinkCircuit	1.3.6.1.4.1.18.3.5.1.6.4.1.1	INTEGER	read-only	- The llc1 circuit that this da/sa/dsap/ssap pair is on.
OCT wfLlcLinkDestMadr	1.3.6.1.4.1.18.3.5.1.6.4.1.2	OCTET STRING	read-only	- Destination and source Mac addresses
OCT wfLlcLinkSrcMadr	1.3.6.1.4.1.18.3.5.1.6.4.1.3	OCTET STRING	read-only	- source Mac address
INT wfLlcLinkDsap	1.3.6.1.4.1.18.3.5.1.6.4.1.4	INTEGER	read-only	- Destination and source sap's
INT wfLlcLinkSsap	1.3.6.1.4.1.18.3.5.1.6.4.1.5	INTEGER	read-only	- Source Sap
CTR wfLlcInfoRxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.6	Counter	read-only	- Counter for I Pdus rcvd
CTR wfLlcInfoTxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.7	Counter	read-only	- Counter for I Pdus sent
CTR wfLlcInfoReXmitCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.8	Counter	read-only	- Counter for I Pdus re-xmitted
CTR wfLlcByteInfoRxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.9	Counter	read-only	- Counter for unnnumbered information - Bytes rcvd
CTR wfLlcByteInfoTxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.10	Counter	read-only	- Counter for unnnumbered information - Bytes sent
CTR wfLlcRrRxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.11	Counter	read-only	- Counter for RR Pdus rcvd
CTR wfLlcRrTxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.12	Counter	read-only	- Counter for RR Pdus Xmted
CTR wfLlcRnrRxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.13	Counter	read-only	- Counter for RNR Pdus rcvd
CTR wfLlcRnrTxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.14	Counter	read-only	- Counter for RNR Pdus sent
CTR wfLlcRejRxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.15	Counter	read-only	- Counter for REJ pdus rcvd
CTR wfLlcRejTxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.16	Counter	read-only	- Counter for REJ pdus xmted
CTR wfLlcFrmrRxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.17	Counter	read-only	- Counter for frame reject rcvd
CTR wfLlcFrmrTxCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.18	Counter	read-only	- Counter for frame reject sent
CTR wfLlcFlowDefersCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.19	Counter	read-only	- Counter for the number of times LLC is unable - to xmit due to a percieved remote busy condition - or to lack of RX window space
CTR wfLlcWaitAckTimeouts	1.3.6.1.4.1.18.3.5.1.6.4.1.20	Counter	read-only	- Counter for expiration of acknowledgment - timers
CTR wfLlcRejectTimeouts	1.3.6.1.4.1.18.3.5.1.6.4.1.21	Counter	read-only	- Counter for the expiration of reject - timeouts
CTR wfLlcPollCycleTimeouts	1.3.6.1.4.1.18.3.5.1.6.4.1.22	Counter	read-only	- Counter for the expiration of P/F cycle timer
CTR wfLlcStateChangeCnt	1.3.6.1.4.1.18.3.5.1.6.4.1.23	Counter	read-only	- Counter for number of LLC flow state changes
CTR wfLlcLastChangeReason	1.3.6.1.4.1.18.3.5.1.6.4.1.24	Counter	read-only	- Counter for the most recent incrementing of the - flow state change counter
CTR wfLlcCurrentState	1.3.6.1.4.1.18.3.5.1.6.4.1.25	Counter	read-only	- Current flow state of the LLC link station
wfLlc2TrafficFilterTable	1.3.6.1.4.1.18.3.5.1.6.8		not-accessible	LLC2 Traffic Filters
wfLlc2TrafficFilterEntry	1.3.6.1.4.1.18.3.5.1.6.8.1		not-accessible	An entry in WfLLC2TrafficFilterTable.
INT wfLlc2TrafficFilterCreate	1.3.6.1.4.1.18.3.5.1.6.8.1.1	INTEGER	read-write	Defines the existence of the traffic filter rule: created - traffic filter exists delete - traffic filter does not exist and can be deleted.
INT wfLlc2TrafficFilterEnable	1.3.6.1.4.1.18.3.5.1.6.8.1.2	INTEGER	read-write	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
INT wfLlc2TrafficFilterStatus	1.3.6.1.4.1.18.3.5.1.6.8.1.3	INTEGER	read-only	Defines the current status of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule.
CTR wfLlc2TrafficFilterCounter	1.3.6.1.4.1.18.3.5.1.6.8.1.4	Counter	read-only	The number of received packets that have matched this rule.
OCT wfLlc2TrafficFilterDefinition	1.3.6.1.4.1.18.3.5.1.6.8.1.5	OCTET STRING	read-write	The filter rule definition.
INT wfLlc2TrafficFilterReserved	1.3.6.1.4.1.18.3.5.1.6.8.1.6	INTEGER	read-only	Reserved field.
INT wfLlc2TrafficFilterCircuit	1.3.6.1.4.1.18.3.5.1.6.8.1.7	INTEGER	read-only	The ID of the Bridge Circuit to which the filter is applied.
INT wfLlc2TrafficFilterRuleNumber	1.3.6.1.4.1.18.3.5.1.6.8.1.8	INTEGER	read-only	ID for the rule.
INT wfLlc2TrafficFilterFragment	1.3.6.1.4.1.18.3.5.1.6.8.1.9	INTEGER	read-only	Fragment number - for large rules.
STR wfLlc2TrafficFilterName	1.3.6.1.4.1.18.3.5.1.6.8.1.10	DisplayString	read-write	name of the rule number
wfLlcDlciTable	1.3.6.1.4.1.18.3.5.1.6.9		not-accessible	ljd: This table defines which DLCI's a LLC interface has access to and the appropriate mac address mappings.
wfLlcDlciEntry	1.3.6.1.4.1.18.3.5.1.6.9.1		not-accessible	An entry in wfLlcDlciTable.
INT wfLlcDlciDelete	1.3.6.1.4.1.18.3.5.1.6.9.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a DLSw Local Device
INT wfLlcDlciCct	1.3.6.1.4.1.18.3.5.1.6.9.1.2	INTEGER	read-only	The LLC interface circuit on which this mapping is configured.
INT wfLlcDlciNum	1.3.6.1.4.1.18.3.5.1.6.9.1.3	INTEGER	read-only	The dlci number for this mapping.
OCT wfLlcDlciLocalMac	1.3.6.1.4.1.18.3.5.1.6.9.1.4	OCTET STRING	read-write	The Local MAC address of the end station to be mapped. In-coming requests on this DLCI will be mapped to the specified Local Mac address. Values are standard MSB Token Ring MAC addresses.
OCT wfLlcDlciRemoteMac	1.3.6.1.4.1.18.3.5.1.6.9.1.5	OCTET STRING	read-write	The Remote MAC address mapping. Out-going requests specifing this mac address will be mapped to the DLCI. Values are standard MSB Token Ring MAC addresses.
wfLlcFrSvcTable	1.3.6.1.4.1.18.3.5.1.6.10		not-accessible	ljd: This table defines which FrSvc's a LLC interface has access to and the appropriate mac address mappings.
wfLlcFrSvcEntry	1.3.6.1.4.1.18.3.5.1.6.10.1		not-accessible	An entry in wfLlcFrSvcTable.
INT wfLlcFrSvcDelete	1.3.6.1.4.1.18.3.5.1.6.10.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a local or remote DNA to mac mapping
INT wfLlcFrSvcCct	1.3.6.1.4.1.18.3.5.1.6.10.1.2	INTEGER	read-only	The LLC interface circuit on which this mapping is configured.
OCT wfLlcFrSvcMac	1.3.6.1.4.1.18.3.5.1.6.10.1.3	OCTET STRING	read-only	The local or remote MAC address of the end station to be mapped. Values are standard MSB Token Ring MAC addresses.
INT wfLlcFrSvcMappingType	1.3.6.1.4.1.18.3.5.1.6.10.1.4	INTEGER	read-write	Specifies weather this is remote or local mapping.
STR wfLlcFrSvcX121Addr	1.3.6.1.4.1.18.3.5.1.6.10.1.5	DisplayString	read-write	WAN address (X.121, E.164, etc.) used to register with FR to accept an incoming call if the mapping is local, or used to establish an SVC (initiate the call) to the configured number if the mapping is remote.
STR wfLlcFrSvcSubAddr	1.3.6.1.4.1.18.3.5.1.6.10.1.6	DisplayString	read-write	Subaddress of type NSAP (Q.931) further qualifies number
INT wfLlcFrSvcPlan	1.3.6.1.4.1.18.3.5.1.6.10.1.7	INTEGER	read-write	Supported Q.931 4.3.8/4.3.10 numbering plans. Each plan is represented by the 4 least significant bits to align with the values stated in Q.931.
INT wfLlcFrSvcTypeOfNumber	1.3.6.1.4.1.18.3.5.1.6.10.1.8	INTEGER	read-write	Supported Q.931 4.3.8/4.3.10 types of number. Each type is represented by a value one greater than the values stated in Q.931.

RFC description

Manages Logical Link Control (LLC) service initialization, state, and interface-level configuration on Wellfleet devices.

Start monitoring Legacy Wellfleet/Bay Networks routers (LLC1/LLC2 timer/retry config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-LLC-MIB

What Is Wellfleet-LLC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description