Wellfleet-TOKEN-RING-MIB

All MIBs › Wellfleet-TOKEN-RING-MIB

Category: Wellfleet BayNetworks LAN and Bridging

Description: Monitors Wellfleet Token Ring interface parameters, ring speed, beaconing status, and MAC error counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-TOKEN-RING-MIB?

Wellfleet-TOKEN-RING-MIB is a Wellfleet router MIB for monitoring Token Ring network interfaces, covering ring speed configuration, beaconing status, and IEEE 802.5 MAC-layer error counters. It exposes both configuration objects (ring speed setting) and operational/fault objects (beaconing condition, MAC error counts) for each Token Ring interface. This is directly hardware/interface health monitoring: beaconing indicates a serious ring fault such as a broken cable or failed station, while MAC error counters reveal a degrading ring before it fails outright. It functions as a vendor extension to the standard IEEE 802.5 Token Ring MIB (RFC 1748), adding Wellfleet-specific detail on top of that standard. It is deployed on Wellfleet routers with Token Ring interface modules in legacy IBM-oriented LAN environments. Engineers can download the Wellfleet-TOKEN-RING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-TOKEN-RING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks router (Token Ring interface module)

Monitoring Examples

No sample objects were provided for this module; typically an operator would poll the beaconing-status object per interface to catch an active ring fault and monitor MAC error counters (e.g., soft error/line error counts) to spot a ring station or cable segment degrading before a full ring failure.

What Can Be Monitored

ring speed configuration
beaconing status
MAC-layer error counters

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfLine

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT wfTokenRingActualConnector	1.3.6.1.4.1.18.3.4.2.1.69	INTEGER	read-only	Actual connector number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used.
CTR wfTokenRingAdapterChecks	1.3.6.1.4.1.18.3.4.2.1.37	Counter	read-only	Number of internal adapter errors that result in adapter crashes.
CTR wfTokenRingAriFciErrors	1.3.6.1.4.1.18.3.4.2.1.42	Counter	read-only	Number of occurrences of this station receiving both an AMP MAC frame and a SMP MAC frame with the a & c bits clear or more than one SMP MAC frame with the a & c bits clear without an intervening AMP MAC frame. This condition indicates that the up-stream neighbor is unable to set the a & c bits in a frame that it has copied.
CTR wfTokenRingAutoRemovalErrors	1.3.6.1.4.1.18.3.4.2.1.32	Counter	read-only	Number of lobe wrap test failures during beacon auto_removal process.
CTR wfTokenRingBurstErrors	1.3.6.1.4.1.18.3.4.2.1.41	Counter	read-only	Number of errored frames with no transition for 5 1/2 bit times.
INT wfTokenRingCct	1.3.6.1.4.1.18.3.4.2.1.6	INTEGER	read-write	cct number for this line instance, configuration required
INT wfTokenRingCfgFunctionalAddress	1.3.6.1.4.1.18.3.4.2.1.63	INTEGER	read-write	The configurable bit mask of all Token Ring Functional addresses for which this interface will accept frames. This value is loaded into the func addr defined in the attribute 'wfTokenRingFunctionalAddress.' note: 2147467520 = 0x7fffc100
OCT wfTokenRingCfgMadr	1.3.6.1.4.1.18.3.4.2.1.9	OCTET STRING	read-write	Configured line MAC address. Only used if wfTokenRingMadrSelect is set appropriately.
INT wfTokenRingCfgRxQueueLength	1.3.6.1.4.1.18.3.4.2.1.58	INTEGER	read-write	Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size.
INT wfTokenRingCfgTxQueueLength	1.3.6.1.4.1.18.3.4.2.1.57	INTEGER	read-write	Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based default values to be used. Values larger than the compiled ring size are truncated to the compiled ring size.
CTR wfTokenRingCmdTimeouts	1.3.6.1.4.1.18.3.4.2.1.54	Counter	read-only	Number of re-initializations due to command time-outs.
INT wfTokenRingConnector	1.3.6.1.4.1.18.3.4.2.1.5	INTEGER	read-only	instance ID Connector, filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'connector'. Where 'module' is defined in attribute 70 and 'connector' is defined in attribute 71 of this table. For non-ASN platforms this attribute is the phisical connector number on the slot
CTR wfTokenRingCounterOverflows	1.3.6.1.4.1.18.3.4.2.1.34	Counter	read-only	Number of adapter error counter overflows.
INT wfTokenRingDelete	1.3.6.1.4.1.18.3.4.2.1.1	INTEGER	read-write	create/delete parameter.
INT wfTokenRingDisable	1.3.6.1.4.1.18.3.4.2.1.2	INTEGER	read-write	enable/disable parameter.
CTR wfTokenRingDmaBusErrors	1.3.6.1.4.1.18.3.4.2.1.47	Counter	read-only	Number of bus errors during DMA that do not exceed threshold.
CTR wfTokenRingDmaParityErrors	1.3.6.1.4.1.18.3.4.2.1.48	Counter	read-only	Number of parity errors during DMA that do not exceed threshold.
INT wfTokenRingEarlyTokenRelease	1.3.6.1.4.1.18.3.4.2.1.12	INTEGER	read-write	Early Token Release parameter, only valid with 16Mbps
wfTokenRingEntry	1.3.6.1.4.1.18.3.4.2.1		not-accessible	An entry in the token table
INT wfTokenRingFirstAdapterCheckCode	1.3.6.1.4.1.18.3.4.2.1.38	INTEGER	read-only	Adapter Check Code of first occurrence.
INT wfTokenRingForceMacCode	1.3.6.1.4.1.18.3.4.2.1.72	INTEGER	read-write	Selector determines which microcode will be downloaded for the TMS380.
CTR wfTokenRingFrameCopiedErrors	1.3.6.1.4.1.18.3.4.2.1.45	Counter	read-only	Number of specifically addressed frames for this station that had their a & c bits previously set.
INT wfTokenRingFunctionalAddress	1.3.6.1.4.1.18.3.4.2.1.64	INTEGER	read-only	The bit mask of all Token Ring Functional addresses for which this interface will accept frames.
INT wfTokenRingGroupAddress	1.3.6.1.4.1.18.3.4.2.1.65	INTEGER	read-only	The single Token Ring Group address for which this interface will accept frames.
CTR wfTokenRingHardErrors	1.3.6.1.4.1.18.3.4.2.1.28	Counter	read-only	Number of events causing the adapter to transmit or receive beacon MAC frames.
CTR wfTokenRingInDiscards	1.3.6.1.4.1.18.3.4.2.1.21	Counter	read-only	Number of error-free inbound packets discarded. Usually due to lack of memory resources. This is equivalent to wfTokenRingRxCongestionErrors.
CTR wfTokenRingInErrors	1.3.6.1.4.1.18.3.4.2.1.22	Counter	read-only	Number of inbound packets not delivered to higher-layer protocol due to errors. The sum of wfTokenRingLineErrors and wfTokenRingBurstErrors.
INT wfTokenRingLastAdapterCheckCode	1.3.6.1.4.1.18.3.4.2.1.39	INTEGER	read-only	Adapter Check Code of most recent (last) occurrence.
TIK wfTokenRingLastChange	1.3.6.1.4.1.18.3.4.2.1.70	TimeTicks	read-only	The value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the time (in hundredths of a second) since the network management portion of the system was last re-initialized. Usually the time since boot.
CTR wfTokenRingLineErrors	1.3.6.1.4.1.18.3.4.2.1.40	Counter	read-only	Number of frames copied or repeated by this station with bad format or an FCS error.
INT wfTokenRingLineNumber	1.3.6.1.4.1.18.3.4.2.1.66	INTEGER	read-write	Logical line number associated with this driver entity.
CTR wfTokenRingLobeWireFaults	1.3.6.1.4.1.18.3.4.2.1.31	Counter	read-only	Number of opens or shorts (cable faults) between the adapter and the MAU.
CTR wfTokenRingLostFrameErrors	1.3.6.1.4.1.18.3.4.2.1.43	Counter	read-only	Number of frames being stripped which are missing their tails.
STR wfTokenRingMacCode	1.3.6.1.4.1.18.3.4.2.1.67	DisplayString	read-only	Type and version of microcode running on the TMS380.
CTR wfTokenRingMacRxFrames	1.3.6.1.4.1.18.3.4.2.1.62	Counter	read-only	Number of Mac frames received without error.
CTR wfTokenRingMacRxOctets	1.3.6.1.4.1.18.3.4.2.1.61	Counter	read-only	Number of Mac frame octets received without error.
OCT wfTokenRingMadr	1.3.6.1.4.1.18.3.4.2.1.8	OCTET STRING	read-only	line MAC address, line driver fills in the currently used 48 bit MAC address.
INT wfTokenRingMadrSelect	1.3.6.1.4.1.18.3.4.2.1.10	INTEGER	read-write	Selector determines which MAC address the interface will use.
INT wfTokenRingModule	1.3.6.1.4.1.18.3.4.2.1.68	INTEGER	read-only	Module number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used.
OCT wfTokenRingMSBMadr	1.3.6.1.4.1.18.3.4.2.1.73	OCTET STRING	read-only	Provides this interface's MAC address in Most Significant Bit (MSB) format. This format is also referred to as Token Ring or IBM format. This MAC address is the same MAC address as given in the wfTokenRingMadr attribute except that wfTokenRingMadr is displayed in ethernet format.
INT wfTokenRingMtu	1.3.6.1.4.1.18.3.4.2.1.7	INTEGER	read-only	mtu parameter, fixed. This mtu of 4568 allows a type 3 Source Route Frame (info=4472) to be IP encapsulated over Token Ring. The components are: AC_FC (2) + SNAP (12+8) + SNAP_IP (12+8+20) + SR (12+18) + TYPE3_INFO (4472) + FCS (4) --------------------- total 4568 bytes
INT wfTokenRingOpenState	1.3.6.1.4.1.18.3.4.2.1.14	INTEGER	read-only	The current interface state with respect to entering or leaving the ring.
INT wfTokenRingOpenStatus	1.3.6.1.4.1.18.3.4.2.1.15	INTEGER	read-only	Indicates the success, or the reason for failure, of the station's most recent attempt to enter the ring.
CTR wfTokenRingOutDiscards	1.3.6.1.4.1.18.3.4.2.1.23	Counter	read-only	Number of error-free outbound packets discarded. Usually due to lack of transmission bandwidth. This is equivalent to wfTokenRingTxClipFrames.
CTR wfTokenRingOutErrors	1.3.6.1.4.1.18.3.4.2.1.24	Counter	read-only	Number of outbound packets that could not be transmitted because of errors. This is equivalent to wfTokenRingLostFrameErrors.
GAU wfTokenRingOutQLen	1.3.6.1.4.1.18.3.4.2.1.71	Gauge	read-only	The instantaneous current length of the output packet queue (in packets).
CTR wfTokenRingRequestRemoves	1.3.6.1.4.1.18.3.4.2.1.33	Counter	read-only	Number of Remove Ring Station MAC frames received. Each frame causes this station to leave the ring.
CTR wfTokenRingRingRecoveries	1.3.6.1.4.1.18.3.4.2.1.36	Counter	read-only	Number of claim token MAC frames (ring recoveries) observed on the ring.
CTR wfTokenRingRxCongestionErrors	1.3.6.1.4.1.18.3.4.2.1.44	Counter	read-only	Number of frames dropped due to receive congestion.
CTR wfTokenRingRxFrames	1.3.6.1.4.1.18.3.4.2.1.18	Counter	read-only	Number of frames received without error.
CTR wfTokenRingRxHostIntErrors	1.3.6.1.4.1.18.3.4.2.1.55	Counter	read-only	Number of re-initializations due to receive host interface errors.
CTR wfTokenRingRxOctets	1.3.6.1.4.1.18.3.4.2.1.17	Counter	read-only	Number of octets received without error.
CTR wfTokenRingRxProcessings	1.3.6.1.4.1.18.3.4.2.1.50	Counter	read-only	Number of processings of received frames (similar to RINT).
INT wfTokenRingRxQueueLength	1.3.6.1.4.1.18.3.4.2.1.60	INTEGER	read-only	Current Receive Queue Length.
CTR wfTokenRingRxReplenMisses	1.3.6.1.4.1.18.3.4.2.1.26	Counter	read-only	Number of packet buffer misses while attempting to replenish driver receive ring.
CTR wfTokenRingRxTimeouts	1.3.6.1.4.1.18.3.4.2.1.53	Counter	read-only	Number of re-initializations due to receiver time-outs.
INT wfTokenRingRxTxBufferSize	1.3.6.1.4.1.18.3.4.2.1.56	INTEGER	read-only	Internal Adapter RAM buffer size.
CTR wfTokenRingSignalLosses	1.3.6.1.4.1.18.3.4.2.1.27	Counter	read-only	Number of ring signal losses detected.
INT wfTokenRingSingleStatDis	1.3.6.1.4.1.18.3.4.2.1.75	INTEGER	read-write	Enable/Disable the single station mode
CTR wfTokenRingSingleStations	1.3.6.1.4.1.18.3.4.2.1.35	Counter	read-only	Number of ring status change interrupts while adapter is only station on the ring.
INT wfTokenRingSlot	1.3.6.1.4.1.18.3.4.2.1.4	INTEGER	read-only	instance ID Slot, filled in by driver
CTR wfTokenRingSoftErrors	1.3.6.1.4.1.18.3.4.2.1.29	Counter	read-only	Number of soft errors. Corresponds to the number of Report Error MAC frames transmitted by this station.
INT wfTokenRingSpeed	1.3.6.1.4.1.18.3.4.2.1.11	INTEGER	read-write	Token Ring speed parameter - 4 and 16 Mbps are only valid values
CTR wfTokenRingSrbNotFreeCmdAborts	1.3.6.1.4.1.18.3.4.2.1.49	Counter	read-only	Number of host to adapter commands aborted because of in-completed in process commands.
INT wfTokenRingState	1.3.6.1.4.1.18.3.4.2.1.3	INTEGER	read-only	line driver state variable, Not Present, Init, Down, Up
INT wfTokenRingStatus	1.3.6.1.4.1.18.3.4.2.1.13	INTEGER	read-only	The current interface status. This attribute is only valid when the wfTokenRingOpenState attribute is set to OPENED. The attribute's value is a sum of values, one for each currently applicable condition (ie, bit positions indicate active conditions). Occurrences of each condition are separately counted and the counts are included in this MIB as attributes wfTokenRingSignalLosses through wfTokenRingRingRecoveries. The following values are defined: 32768 = Signal Losses 16384 = Hard Errors 8192 = Soft Errors 4096 = Transmit Beacons 2048 = Lobe Wire Faults 1024 = Auto-Removal Errors 256 = Remove Received 128 = Counter Overflows 64 = Single Stations 32 = Ring Recoveries This attribute is the most recent sum of these conditions. More information on each condition is include in the descriptions of the individual counter attributes.
wfTokenRingTable	1.3.6.1.4.1.18.3.4.2		not-accessible	TOKEN RING line record
CTR wfTokenRingTokenErrors	1.3.6.1.4.1.18.3.4.2.1.46	Counter	read-only	Number of token protocol errors. Only relevant when this station is the active monitor.
CTR wfTokenRingTransmitBeacons	1.3.6.1.4.1.18.3.4.2.1.30	Counter	read-only	Number of events causing the adapter to transmit beacon frames.
INT wfTokenRingTurboBoflDebug	1.3.6.1.4.1.18.3.4.2.1.74	INTEGER	read-write	Special Turbo-BOFL debug mechanism to be used by Engineering and Manufacturing only. 31-24 : TMO - period of breath (amount of time between successive breaths of life) 23-16 : Number of packets per breath. 15-0 : Packet length in bytes - 22 bytes minimum. All bits set to zero will disable this attribute.
CTR wfTokenRingTxClipFrames	1.3.6.1.4.1.18.3.4.2.1.25	Counter	read-only	Number of frames clipped in driver's transmit routine due to transmit congestion.
CTR wfTokenRingTxCmplProcessings	1.3.6.1.4.1.18.3.4.2.1.52	Counter	read-only	Number of processings of transmitted frames (similar to TINT).
CTR wfTokenRingTxFrames	1.3.6.1.4.1.18.3.4.2.1.20	Counter	read-only	Number of frames transmitted without error.
CTR wfTokenRingTxOctets	1.3.6.1.4.1.18.3.4.2.1.19	Counter	read-only	Number of octets transmitted without error.
CTR wfTokenRingTxProcessings	1.3.6.1.4.1.18.3.4.2.1.51	Counter	read-only	Number of processings of frames for transmit.
INT wfTokenRingTxQueueLength	1.3.6.1.4.1.18.3.4.2.1.59	INTEGER	read-only	Current Transmit Queue Length.
OCT wfTokenRingUpStream	1.3.6.1.4.1.18.3.4.2.1.16	OCTET STRING	read-only	MAC address of Up Stream neighbor. Only valid when 'opened'.

RFC description

Wellfleet-proprietary MIB for managing token ring interfaces and performance on Wellfleet networking equipment (legacy technology).

Start monitoring Wellfleet/Bay Networks router, Token Ring interface module (beaconing/MAC-error-counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-TOKEN-RING-MIB

What Is Wellfleet-TOKEN-RING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description