All MIBs › WR-SWITCH-MIB
Organization: CERN
Last Updated: 2020-05-22
Category: Scientific and Precision Timing
Description: Manages CERN White Rabbit precision timing switch port configuration, synchronization status, and link metrics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is WR-SWITCH-MIB?
WR-SWITCH-MIB is a specialized MIB from CERN for the White Rabbit switch, a precision time-transfer Ethernet switch used in scientific and telecom timing infrastructure built on the White Rabbit extension to IEEE 1588 PTP. It exposes system health scalars covering overall system status, OS status, network status, and PTP/timing synchronization status, along with a boot-success indicator and per-port statistics. It explicitly supports monitoring the hardware and software status of the switch through objects flagging temperature warnings, low free memory, high CPU load, and low disk space, in addition to the higher-level main-system/OS/timing/networking status indicators. Given its reliance on the IEEE 1588 Precision Time Protocol and the White Rabbit synchronization extension, it clearly depends on that timing standard rather than only generic SNMP MIBs. It is deployed in scientific and telecom timing-distribution networks, such as CERN's accelerator control systems, where operators must guarantee sub-nanosecond clock synchronization and catch resource exhaustion or thermal issues before they degrade timing accuracy. Engineers can download the WR-SWITCH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WR-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- CERN White Rabbit precision-timing Ethernet switch
Monitoring Examples
An admin would poll wrsMainSystemStatus and wrsPTPStatus to confirm the switch is healthy and its White Rabbit PTP synchronization is locked, and check wrsOSStatus and wrsNetworkingStatus for underlying OS and network subsystem health. If wrsTemperatureWarning or wrsCpuLoadHigh flips true, or wrsMemoryFreeLow/wrsDiskSpaceLow trips, it signals resource exhaustion that could jeopardize precise time distribution. wrsBootSuccessful confirms the unit completed startup cleanly after a reboot, and the wrsPstatsTable would be polled for per-port traffic counters on the switch's timing/network ports.
What Can Be Monitored
- main system status
- OS status
- PTP/timing synchronization status
- networking status
- boot success
- temperature/memory/CPU/disk warning flags
- per-port statistics
This MIB depends on
Imported Objects
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| PhysAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| cern | 1.3.6.1.4.1.96 | |||
| wrSwitchMIB | 1.3.6.1.4.1.96.100 | White Rabbit Switch internal details | ||
| wrsScalar | 1.3.6.1.4.1.96.100.1 | |||
| I32 wrsScalarOne | 1.3.6.1.4.1.96.100.1.1 | Integer32 | read-write | Integer incremented at every GET |
| wrsStatus | 1.3.6.1.4.1.96.100.6 | |||
| wrsGeneralStatusGroup | 1.3.6.1.4.1.96.100.6.1 | |||
| INT wrsMainSystemStatus | 1.3.6.1.4.1.96.100.6.1.1 | INTEGER | read-only | Grouped status of WRS switch ok - other objects in wrsGeneralStatusGroup are ok error - there is an error in wrsGeneralStatusGroup warning - there is a warning in wrsGeneralStatusGroup warningNA - there is N/A field in wrsGeneralStatusGroup bug - bug in checking conditions of wrsGeneralStatusGroup, please report |
| INT wrsOSStatus | 1.3.6.1.4.1.96.100.6.1.2 | INTEGER | read-only | Grouped status of wrsOSStatusGroup ok - values in wrsOSStatusGroup are ok error - there is an error in wrsOSStatusGroup warning - there is a warning in wrsOSStatusGroup warningNA - there is N/A field in wrsOSStatusGroup bug - bug in checking conditions of wrsOSStatusGroup, please report |
| INT wrsTimingStatus | 1.3.6.1.4.1.96.100.6.1.3 | INTEGER | read-only | Grouped status of wrsTimingStatusGroup ok - values in wrsTimingStatusGroup are ok error - there is an error in wrsTimingStatusGroup warning - there is a warning in wrsTimingStatusGroup warningNA - there is N/A field in wrsTimingStatusGroup bug - bug in checking conditions of wrsTimingStatusGroup, please report |
| INT wrsNetworkingStatus | 1.3.6.1.4.1.96.100.6.1.4 | INTEGER | read-only | Grouped status of wrsNetworkingStatusGroup ok - values in wrsNetworkingStatusGroup are ok error - there is an error in wrsNetworkingStatusGroup warning - there is a warning in wrsNetworkingStatusGroup warningNA - there is N/A field in wrsNetworkingStatusGroup bug - bug in checking conditions of wrsNetworkingStatusGroup, please report |
| wrsDetailedStatusesGroup | 1.3.6.1.4.1.96.100.6.2 | |||
| wrsOSStatusGroup | 1.3.6.1.4.1.96.100.6.2.1 | |||
| INT wrsBootSuccessful | 1.3.6.1.4.1.96.100.6.2.1.1 | INTEGER | read-only | Grouped status of wrsBootStatusGroup, indicating whether boot was successful ok - values in wrsBootStatusGroup are correct error - there is an error in wrsBootStatusGroup warning - there is a warning in wrsBootStatusGroup warningNA - there is N/A field in wrsBootStatusGroup bug - bug in checking conditions of wrsBootStatusGroup, please report |
| INT wrsTemperatureWarning | 1.3.6.1.4.1.96.100.6.2.1.2 | INTEGER | read-only | Warning if temperature exceed threshold levels |
| INT wrsMemoryFreeLow | 1.3.6.1.4.1.96.100.6.2.1.3 | INTEGER | read-only | Status of free memory. Based on wrsMemoryGroup. Error - more than 80% memory used Warning - more than 50% memory used |
| INT wrsCpuLoadHigh | 1.3.6.1.4.1.96.100.6.2.1.4 | INTEGER | read-only | Status of CPU load. Based on average load in group wrsCpuLoad. Error - average CPU load is more than 3 for 1min, 2 for 5min or 1.5 for 15min Warning - average CPU load is more than 2 for 1min, 1.5 for 5min or 1 for 15min |
| INT wrsDiskSpaceLow | 1.3.6.1.4.1.96.100.6.2.1.5 | INTEGER | read-only | Status of used disk space. Based on wrsDiskTable. Error - more than 90% of any disk is used Warning - more than 80% of any disk is used |
| wrsTimingStatusGroup | 1.3.6.1.4.1.96.100.6.2.2 | |||
| INT wrsPTPStatus | 1.3.6.1.4.1.96.100.6.2.2.1 | INTEGER | read-only | Grouped status of PTP daemon based on values in wrsPtpDataTable ok - Correct values in wrsPtpDataTable error - error in wrsPtpDataTable firstRead - unable to calculate deltas in first read |
| INT wrsSoftPLLStatus | 1.3.6.1.4.1.96.100.6.2.2.2 | INTEGER | read-only | Grouped status of Soft PLL based on values in wrsSpllState ok - values in wrsSpllState are correct error - there is an error in wrsSpllState warning - there is a warning in wrsSpllState warningNA - there is N/A field in wrsSpllState bug - bug in checking conditions of wrsSpllState, please report |
| INT wrsSlaveLinksStatus | 1.3.6.1.4.1.96.100.6.2.2.3 | INTEGER | read-only | Grouped status of slave link statuses ok - all links have proper status error - wrong link status of at least one link warningNA - there is N/A in one of object used to calculate this value |
| INT wrsPTPFramesFlowing | 1.3.6.1.4.1.96.100.6.2.2.4 | INTEGER | read-only | Grouped status of TX and RX PTP packets flowing ok - when there are PTP packets flowing in both directions on all wr ports that are up warningNA - there is N/A in one of object used to calculate this value error - no PTP packets flowing on at least one wr up port firstRead - cannot calculate value from only one read |
| INT wrsSystemClockStatus | 1.3.6.1.4.1.96.100.6.2.2.5 | INTEGER | read-only | Grouped status of system clock ok - system clock is withing threshold (set in WRS configuration) to NTP time and correct leap seconds file was loaded error - system clock problem, either it diverged or incorrect leap seconds file is used warning - leapseconds file is not valid anymore and should be updated warningNA - some information could not be retrieved to calculate the value of this object |
| wrsNetworkingStatusGroup | 1.3.6.1.4.1.96.100.6.2.3 | |||
| INT wrsSFPsStatus | 1.3.6.1.4.1.96.100.6.2.3.1 | INTEGER | read-only | Grouped status of SFPs ok - all SFPs are ok error - there is an error in SFP warningNA - there is N/A in one of object used to calculate this value bug - bug in checking conditions of SFPs, please report |
| INT wrsEndpointStatus | 1.3.6.1.4.1.96.100.6.2.3.2 | INTEGER | read-only | Grouped status of all endpoints ok - all endpoints are ok error - erro in at least one endpoint firstRead - cannot calculate value from only one read |
| INT wrsSwcoreStatus | 1.3.6.1.4.1.96.100.6.2.3.3 | INTEGER | read-only | Overall status of Soft Core. ok - correct Soft Core status error - erroneous Soft Core status firstRead - cannot calculate value from only one read |
| INT wrsRTUStatus | 1.3.6.1.4.1.96.100.6.2.3.4 | INTEGER | read-only | RTU status ok - correct RTU status error - erroneous RTU status firstRead - cannot calculate value from only one read |
| wrsVersionGroup | 1.3.6.1.4.1.96.100.6.3 | |||
| STR wrsVersionSwVersion | 1.3.6.1.4.1.96.100.6.3.1 | DisplayString | read-only | The software version, as returned from 'git describe' at build time |
| STR wrsVersionSwBuildBy | 1.3.6.1.4.1.96.100.6.3.2 | DisplayString | read-only | The software build by, as returned from 'git config --get-all user.name' at build time |
| STR wrsVersionSwBuildDate | 1.3.6.1.4.1.96.100.6.3.3 | DisplayString | read-only | The build date of the software, '__DATE__' at build time |
| STR wrsVersionBackplaneVersion | 1.3.6.1.4.1.96.100.6.3.4 | DisplayString | read-only | The hardware version of minibackplane PCB |
| STR wrsVersionFpgaType | 1.3.6.1.4.1.96.100.6.3.5 | DisplayString | read-only | The hardware type of FPGA |
| STR wrsVersionManufacturer | 1.3.6.1.4.1.96.100.6.3.6 | DisplayString | read-only | The name of the manufacturing company of the switch |
| STR wrsVersionSwitchSerialNumber | 1.3.6.1.4.1.96.100.6.3.7 | DisplayString | read-only | The serial number (or string) of the switch |
| STR wrsVersionScbVersion | 1.3.6.1.4.1.96.100.6.3.8 | DisplayString | read-only | The version of the SCB (switch's motherboard) |
| STR wrsVersionGwVersion | 1.3.6.1.4.1.96.100.6.3.9 | DisplayString | read-only | The version of gateware (FPGA bitstream) |
| STR wrsVersionGwBuild | 1.3.6.1.4.1.96.100.6.3.10 | DisplayString | read-only | The build ID of gateware (FPGA bitstream) |
| STR wrsVersionSwitchHdlCommitId | 1.3.6.1.4.1.96.100.6.3.11 | DisplayString | read-only | The gateware version: commit ID of wr_switch_hdl |
| STR wrsVersionGeneralCoresCommitId | 1.3.6.1.4.1.96.100.6.3.12 | DisplayString | read-only | The gateware version: commit of general-cores |
| STR wrsVersionWrCoresCommitId | 1.3.6.1.4.1.96.100.6.3.13 | DisplayString | read-only | The gateware version: commit of wr-cores |
| STR wrsVersionLastUpdateDate | 1.3.6.1.4.1.96.100.6.3.14 | DisplayString | read-only | Date and time of last firmware update, this information may not be accurate, due to hard restarts or lack of proper time at update. |
| wrsExpertStatus | 1.3.6.1.4.1.96.100.7 | |||
| wrsOperationStatus | 1.3.6.1.4.1.96.100.7.1 | |||
| wrsCurrentTimeGroup | 1.3.6.1.4.1.96.100.7.1.1 | |||
| C64 wrsDateTAI | 1.3.6.1.4.1.96.100.7.1.1.1 | Counter64 | read-only | The current time, in TAI seconds |
| STR wrsDateTAIString | 1.3.6.1.4.1.96.100.7.1.1.2 | DisplayString | read-only | The current TAI time, printed as %y-%m-%d-%H:%M:%S (no time zone) |
| INT wrsSystemClockStatusDetails | 1.3.6.1.4.1.96.100.7.1.1.3 | INTEGER | read-only | The system clock is compared to NTP time ok - system clock is under the threshold value thresholdExceeded - system clock has exceeded the threshold value IOError - IO error detected (error) unknownStatus - Unexpected status (error) error - Error detected warningNA - there is N/A in one of object used to calculate this value |
| I32 wrsSystemClockDrift | 1.3.6.1.4.1.96.100.7.1.1.4 | Integer32 | read-only | Drift of system clock expressed in seconds |
| I32 wrsSystemClockDriftThreshold | 1.3.6.1.4.1.96.100.7.1.1.5 | Integer32 | read-only | Threshold level in seconds for system clock drift |
| I32 wrsSystemClockCheckInterval | 1.3.6.1.4.1.96.100.7.1.1.6 | Integer32 | read-only | Check interval of system clock drift. The unit is given by wrsSystemClockCheckIntervalUnit object. |
| INT wrsSystemClockCheckIntervalUnit | 1.3.6.1.4.1.96.100.7.1.1.7 | INTEGER | read-only | System clock check interval unit (see wrsSystemClockCheckInterval) seconds - System clock check interval expressed in seconds minutes - System clock check interval expressed in minutes days - System clock check interval expressed in number of days |
| INT wrsLeapSecSource | 1.3.6.1.4.1.96.100.7.1.1.8 | INTEGER | read-only | Source leap second file (leap-seconds.list) local - The local file is used tryRemote - Try to download the file, if it fails do not propagate error forceRemote - Try to download the file, if it fails the error is propagated errorMinor - cannot read the status file, problem is probably somewhere else |
| INT wrsLeapSecStatusDetails | 1.3.6.1.4.1.96.100.7.1.1.9 | INTEGER | read-only | Leap second status ok - Everything ok leapSecFileExpired - The current leap second file is out-dated internalErrorDetected - Internal error detected (system,...) taiReadError - Cannot read the TAI time leaSecInserted - A leap second will be inserted at 00:00 leapSecDeleted - A leap second will be deleted at 00:00 errorMinor - cannot read the status file, problem is probably somewhere else |
| INT wrsLeapSecSourceStatusDetails | 1.3.6.1.4.1.96.100.7.1.1.10 | INTEGER | read-only | Download status of the leap seconds file ok - Everything is OK updated - Local leap seconds file has been updated dhcpError - DHCP error detected invalidUrl - The URL is not reachable or invalid invalidFile - The download file is invalid downloadError - Error detected during the download errorMinor - cannot read the status file, problem is probably somewhere else |
| STR wrsLeapSecSourceURL | 1.3.6.1.4.1.96.100.7.1.1.11 | DisplayString | read-only | Url to the leap second file |
| wrsBootStatusGroup | 1.3.6.1.4.1.96.100.7.1.2 | |||
| C32 wrsBootCnt | 1.3.6.1.4.1.96.100.7.1.2.1 | Counter32 | read-only | Number of switch's boots since power-on |
| C32 wrsRebootCnt | 1.3.6.1.4.1.96.100.7.1.2.2 | Counter32 | read-only | The number of soft reboots. This is incremented by the reboot system call. A healthy system should feature one soft-reboot less than total boots. |
| INT wrsRestartReason | 1.3.6.1.4.1.96.100.7.1.2.3 | INTEGER | read-only | Reason of last switch restart. error(1) - unable to read restart reason or reset counters generalReset(2) - Both VDDCORE and VDDBU rising (power-on) wakeUpReset(3) - VDDCORE rising watchdogReset(4) - Watchdog fault occurred softwareReset(5) - Processor reset required by the software (system reboot) userReset(6) - NRST pin detected low (reset button) restartByMonit(7) - Restart caused by Monit, please check wrsRestartReasonMonit for program that caused problems |
| OCT wrsFaultIP | 1.3.6.1.4.1.96.100.7.1.2.4 | OCTET STRING | read-only | The fault address of the last panic. This is the instruction pointer normally printed by the stack backtrace. The register is zeroed at first boot and only modified within panic. |
| OCT wrsFaultLR | 1.3.6.1.4.1.96.100.7.1.2.5 | OCTET STRING | read-only | The link register register at last panic. This is usually the caller of the function that failed, but it may be a local register if the failing function saved lr to the stack and used it as a scratch register. |
| INT wrsConfigSource | 1.3.6.1.4.1.96.100.7.1.2.6 | INTEGER | read-only | Source of used dotconfig local - used dot-config was stored on the switch remote - dot-config retrieved from the network check the wrsConfigSourceUrl for the path tryDhcp - try to get URL to the dot-config via DHCP, if DHCP retrieve fail do not propagate error to the wrsBootSuccessful; forceDhcp - get URL to the dot-config via DHCP, if failed propagate error to the wrsBootSuccessful errorMinor - cannot read the status file, problem is probably somewhere else |
| STR wrsConfigSourceUrl | 1.3.6.1.4.1.96.100.7.1.2.7 | DisplayString | read-only | Url to the dot-config |
| STR wrsRestartReasonMonit | 1.3.6.1.4.1.96.100.7.1.2.8 | DisplayString | read-only | Program's name which caused the monit to restart the switch due to too many crashes. |
| INT wrsBootConfigStatus | 1.3.6.1.4.1.96.100.7.1.2.9 | INTEGER | read-only | Result of loading or downloading dot-config file ok - dot-config downloaded or loaded correctly downloadError - unable to download a file from a given source checkError - config file is not valid or too short (less than 200 characters). errorMinor - cannot read the status file, problem is probably somewhere else dhcpError - unable to get URL to dot-config via DHCP (only for forceDhcp) |
| INT wrsBootHwinfoReadout | 1.3.6.1.4.1.96.100.7.1.2.10 | INTEGER | read-only | Result of hwinfo readout ok - hwinfo readout successful error - hwinfo readout failed errorMinor - cannot read status file, problem is probably somewhere else warning - no hwinfo partition |
| INT wrsBootLoadFPGA | 1.3.6.1.4.1.96.100.7.1.2.11 | INTEGER | read-only | Result of loading FPGA ok - FPGA loaded successfully error - loading failed errorMinor - cannot read status file, problem is probably somewhere else fileNotFound - file to be loaded not found |
| INT wrsBootLoadLM32 | 1.3.6.1.4.1.96.100.7.1.2.12 | INTEGER | read-only | Result of loading LM32 ok - LM32 loaded successfully error - loading failed errorMinor - cannot read status file, problem is probably somewhere else fileNotFound - file to be loaded not found |
| INT wrsBootKernelModulesMissing | 1.3.6.1.4.1.96.100.7.1.2.13 | INTEGER | read-only | Checking if all desired kernel modules are loaded. allKernelModulesPresent - all modules loaded other numbers represent number of modules not loaded other errors (like unable to open /proc/modules) are reported as maximum number of missing modules |
| INT wrsBootUserspaceDaemonsMissing | 1.3.6.1.4.1.96.100.7.1.2.14 | INTEGER | read-only | Checking if all desired daemons are running. allDaemonsPresent - all daemons running other numbers represent number of daemons not running other errors (can be: unable to run ps command or problem with multiple process instances) are reported as maximum number of missing modules |
| C32 wrsGwWatchdogTimeouts | 1.3.6.1.4.1.96.100.7.1.2.15 | Counter32 | read-only | Number of times the watchdog has restarted the HDL module responsible for the Ethernet switching process. |
| INT wrsFwUpdateStatus | 1.3.6.1.4.1.96.100.7.1.2.16 | INTEGER | read-only | Status of the last firmware update. ok - Update successful checksumError - firmware checksum error |
| INT wrsCustomBootScriptSource | 1.3.6.1.4.1.96.100.7.1.2.17 | INTEGER | read-only | Source of the custom boot script local - used custom boot script was stored on the switch remote - custom boot script was retrieved from the network; check the wrsCustomBootScriptSourceUrl for the path disabled - do not run custom boot script errorMinor - cannot read the status file, problem is probably somewhere else |
| STR wrsCustomBootScriptSourceUrl | 1.3.6.1.4.1.96.100.7.1.2.18 | DisplayString | read-only | Url to the custom boot script |
| INT wrsCustomBootScriptStatus | 1.3.6.1.4.1.96.100.7.1.2.19 | INTEGER | read-only | The result of execution of the custom boot script ok - custom boot script executed successfully failed - custom boot script failed during execution wrongSrc - no valid source of the custom boot script present in dot-config downloadError - unable to download a file from a given source disabled - do not run custom boot script error - unsupported status errorMinor - cannot read the status file, problem is probably somewhere else |
| INT wrsAuxClkSetStatus | 1.3.6.1.4.1.96.100.7.1.2.20 | INTEGER | read-only | Result of setting up auxclk on connector clk2 ok - successful set pu of the auxclk failed - error while setting up the auxclk disabled - the setting up of the auxclk disabled in dot-config error - unsuported status errorMinor - cannot read the status file, the problem is probably somewhere else |
| INT wrsThrottlingSetStatus | 1.3.6.1.4.1.96.100.7.1.2.21 | INTEGER | read-only | Result of setting up a limit on the Rx bandwidth of the traffic that goes from WR ports to Linux. ok - successful set up of the throttling failed - error while setting up the throttling disabled - the setting up of the throttling disabled in dot-config error - unsuported status errorMinor - cannot read the status file, the problem is probably somewhere else |
| INT wrsVlansSetStatus | 1.3.6.1.4.1.96.100.7.1.2.22 | INTEGER | read-only | Result of setting up VLANs ok - successful set up of VLANs failed - error while setting up VLANs disabled - the setting up of VLANs disabled in dot-config error - unsuported status errorMinor - cannot read the status file, the problem is probably somewhere else |
| wrsTemperatureGroup | 1.3.6.1.4.1.96.100.7.1.3 | |||
| I32 wrsTempFPGA | 1.3.6.1.4.1.96.100.7.1.3.1 | Integer32 | read-only | FPGA temperature |
| I32 wrsTempPLL | 1.3.6.1.4.1.96.100.7.1.3.2 | Integer32 | read-only | PLL temperature |
| I32 wrsTempPSL | 1.3.6.1.4.1.96.100.7.1.3.3 | Integer32 | read-only | Power Supply Left (PSL) temperature |
| I32 wrsTempPSR | 1.3.6.1.4.1.96.100.7.1.3.4 | Integer32 | read-only | Power Supply Right (PSR) temperature |
| I32 wrsTempThresholdFPGA | 1.3.6.1.4.1.96.100.7.1.3.5 | Integer32 | read-only | Threshold level for FPGA temperature |
| I32 wrsTempThresholdPLL | 1.3.6.1.4.1.96.100.7.1.3.6 | Integer32 | read-only | Threshold level for PLL temperature |
| I32 wrsTempThresholdPSL | 1.3.6.1.4.1.96.100.7.1.3.7 | Integer32 | read-only | Threshold level for Power Supply Left (PSL) temperature |
| I32 wrsTempThresholdPSR | 1.3.6.1.4.1.96.100.7.1.3.8 | Integer32 | read-only | Threshold level for Power Supply Right (PSR) temperature |
| wrsMemoryGroup | 1.3.6.1.4.1.96.100.7.1.4 | |||
| I32 wrsMemoryTotal | 1.3.6.1.4.1.96.100.7.1.4.1 | Integer32 | read-only | Ram size in kB |
| I32 wrsMemoryUsed | 1.3.6.1.4.1.96.100.7.1.4.2 | Integer32 | read-only | Used RAM in kB (Cache and buffers are not counted) |
| I32 wrsMemoryUsedPerc | 1.3.6.1.4.1.96.100.7.1.4.3 | Integer32 | read-only | Percentage of used RAM |
| I32 wrsMemoryFree | 1.3.6.1.4.1.96.100.7.1.4.4 | Integer32 | read-only | Free RAM in kB |
| wrsCpuLoadGroup | 1.3.6.1.4.1.96.100.7.1.5 | |||
| I32 wrsCPULoadAvg1min | 1.3.6.1.4.1.96.100.7.1.5.1 | Integer32 | read-only | Load average over 1min multiplied by 100 |
| I32 wrsCPULoadAvg5min | 1.3.6.1.4.1.96.100.7.1.5.2 | Integer32 | read-only | Load average over 5min multiplied by 100 |
| I32 wrsCPULoadAvg15min | 1.3.6.1.4.1.96.100.7.1.5.3 | Integer32 | read-only | Load average over 15min multiplied by 100 |
| wrsDiskTable | 1.3.6.1.4.1.96.100.7.1.6 | not-accessible | Information for each mounted partition | |
| wrsDiskEntry | 1.3.6.1.4.1.96.100.7.1.6.1 | not-accessible | An entry containing partitions' details | |
| U32 wrsDiskIndex | 1.3.6.1.4.1.96.100.7.1.6.1.1 | Unsigned32 | not-accessible | Index for wrsDiskTable |
| STR wrsDiskMountPath | 1.3.6.1.4.1.96.100.7.1.6.1.2 | DisplayString | read-only | Mount patch of reported partition |
| I32 wrsDiskSize | 1.3.6.1.4.1.96.100.7.1.6.1.3 | Integer32 | read-only | Partition size |
| I32 wrsDiskUsed | 1.3.6.1.4.1.96.100.7.1.6.1.4 | Integer32 | read-only | Used space on partition |
| I32 wrsDiskFree | 1.3.6.1.4.1.96.100.7.1.6.1.5 | Integer32 | read-only | Free space on partition |
| I32 wrsDiskUseRate | 1.3.6.1.4.1.96.100.7.1.6.1.6 | Integer32 | read-only | Percentage of used space on partition |
| STR wrsDiskFilesystem | 1.3.6.1.4.1.96.100.7.1.6.1.7 | DisplayString | read-only | Filesystem reported by df command |
| wrsStartCntGroup | 1.3.6.1.4.1.96.100.7.2 | |||
| C32 wrsStartCntHAL | 1.3.6.1.4.1.96.100.7.2.1 | Counter32 | read-only | Number of HAL daemon starts |
| C32 wrsStartCntPTP | 1.3.6.1.4.1.96.100.7.2.2 | Counter32 | read-only | Number of PTP daemon starts |
| C32 wrsStartCntRTUd | 1.3.6.1.4.1.96.100.7.2.3 | Counter32 | read-only | Number of RTU daemon starts |
| C32 wrsStartCntSshd | 1.3.6.1.4.1.96.100.7.2.4 | Counter32 | read-only | Number of SSH daemon starts |
| C32 wrsStartCntHttpd | 1.3.6.1.4.1.96.100.7.2.5 | Counter32 | read-only | Number of HTTP daemon starts |
| C32 wrsStartCntSnmpd | 1.3.6.1.4.1.96.100.7.2.6 | Counter32 | read-only | Number of SNMP daemon starts |
| C32 wrsStartCntSyslogd | 1.3.6.1.4.1.96.100.7.2.7 | Counter32 | read-only | Number of SYSLOG daemon starts |
| C32 wrsStartCntWrsWatchdog | 1.3.6.1.4.1.96.100.7.2.8 | Counter32 | read-only | Number of wrs_watchdog daemon starts |
| C32 wrsStartCntLldpd | 1.3.6.1.4.1.96.100.7.2.9 | Counter32 | read-only | Number of LLDP daemon starts |
| C32 wrsStartCntLdap | 1.3.6.1.4.1.96.100.7.2.10 | Counter32 | read-only | Number of LDAP daemon starts |
| wrsSpllState | 1.3.6.1.4.1.96.100.7.3 | |||
| wrsSpllVersionGroup | 1.3.6.1.4.1.96.100.7.3.1 | |||
| STR wrsSpllVersion | 1.3.6.1.4.1.96.100.7.3.1.1 | DisplayString | read-only | The Soft PLL version, as returned from 'git describe' at build time |
| STR wrsSpllBuildDate | 1.3.6.1.4.1.96.100.7.3.1.2 | DisplayString | read-only | The build date of the Soft PLL, '__DATE__' at build time |
| STR wrsSpllBuildBy | 1.3.6.1.4.1.96.100.7.3.1.3 | DisplayString | read-only | The build by of the Soft PLL |
| wrsSpllStatusGroup | 1.3.6.1.4.1.96.100.7.3.2 | |||
| INT wrsSpllMode | 1.3.6.1.4.1.96.100.7.3.2.1 | INTEGER | read-only | Mode of Soft PLL (values taken from softpll_export.h, wrpc-sw repo) |
| C32 wrsSpllIrqCnt | 1.3.6.1.4.1.96.100.7.3.2.2 | Counter32 | read-only | Number of interrupts in Soft PLL |
| INT wrsSpllSeqState | 1.3.6.1.4.1.96.100.7.3.2.3 | INTEGER | read-only | Sequence state of Soft PLL (values taken from file softpll_export.h, wrpc-sw repo) |
| INT wrsSpllAlignState | 1.3.6.1.4.1.96.100.7.3.2.4 | INTEGER | read-only | Align state of Soft PLL (values taken from file softpll_export.h, wrpc-sw repo) |
| C32 wrsSpllHlock | 1.3.6.1.4.1.96.100.7.3.2.5 | Counter32 | read-only | HLock in Soft PLL |
| C32 wrsSpllMlock | 1.3.6.1.4.1.96.100.7.3.2.6 | Counter32 | read-only | MLock at Soft PLL |
| I32 wrsSpllHY | 1.3.6.1.4.1.96.100.7.3.2.7 | Integer32 | read-only | H_y at Soft PLL |
| I32 wrsSpllMY | 1.3.6.1.4.1.96.100.7.3.2.8 | Integer32 | read-only | M_y at Soft PLL |
| C32 wrsSpllDelCnt | 1.3.6.1.4.1.96.100.7.3.2.9 | Counter32 | read-only | Del counter at Soft PLL |
| wrsPstatsTable | 1.3.6.1.4.1.96.100.7.4 | not-accessible | Pstats counters for each port | |
| wrsPstatsEntry | 1.3.6.1.4.1.96.100.7.4.1 | not-accessible | An entry containing pstats counters | |
| U32 wrsPstatsIndex | 1.3.6.1.4.1.96.100.7.4.1.1 | Unsigned32 | not-accessible | Index for wrsPstatsTable |
| STR wrsPstatsPortName | 1.3.6.1.4.1.96.100.7.4.1.2 | DisplayString | read-only | Port name of port |
| C32 wrsPstatsTXUnderrun | 1.3.6.1.4.1.96.100.7.4.1.3 | Counter32 | read-only | Number of TX underrun errors |
| C32 wrsPstatsRXOverrun | 1.3.6.1.4.1.96.100.7.4.1.4 | Counter32 | read-only | Number of RX overrun errors |
| C32 wrsPstatsRXInvalidCode | 1.3.6.1.4.1.96.100.7.4.1.5 | Counter32 | read-only | Number of received invalid 8B10B code errors |
| C32 wrsPstatsRXSyncLost | 1.3.6.1.4.1.96.100.7.4.1.6 | Counter32 | read-only | Number of RX link synchronization lost |
| C32 wrsPstatsRXPauseFrames | 1.3.6.1.4.1.96.100.7.4.1.7 | Counter32 | read-only | Number of received pause frames |
| C32 wrsPstatsRXPfilterDropped | 1.3.6.1.4.1.96.100.7.4.1.8 | Counter32 | read-only | Number of received frames dropped at pfilter |
| C32 wrsPstatsRXPCSErrors | 1.3.6.1.4.1.96.100.7.4.1.9 | Counter32 | read-only | Number of errors occurred during frame reception in PCS |
| C32 wrsPstatsRXGiantFrames | 1.3.6.1.4.1.96.100.7.4.1.10 | Counter32 | read-only | Number of received giant frames (bigger than Maximum Receive Unit) |
| C32 wrsPstatsRXRuntFrames | 1.3.6.1.4.1.96.100.7.4.1.11 | Counter32 | read-only | Number of received runt frames (smaller than 64bytes) |
| C32 wrsPstatsRXCRCErrors | 1.3.6.1.4.1.96.100.7.4.1.12 | Counter32 | read-only | Number of RX CRC errors |
| C32 wrsPstatsRXPclass0 | 1.3.6.1.4.1.96.100.7.4.1.13 | Counter32 | read-only | Number of received frames assigned to class 0 by packet filter in endpoint |
| C32 wrsPstatsRXPclass1 | 1.3.6.1.4.1.96.100.7.4.1.14 | Counter32 | read-only | Number of received frames assigned to class 1 by packet filter in endpoint |
| C32 wrsPstatsRXPclass2 | 1.3.6.1.4.1.96.100.7.4.1.15 | Counter32 | read-only | Number of received frames assigned to class 2 by packet filter in endpoint |
| C32 wrsPstatsRXPclass3 | 1.3.6.1.4.1.96.100.7.4.1.16 | Counter32 | read-only | Number of received frames assigned to class 3 by packet filter in endpoint |
| C32 wrsPstatsRXPclass4 | 1.3.6.1.4.1.96.100.7.4.1.17 | Counter32 | read-only | Number of received frames assigned to class 4 by packet filter in endpoint |
| C32 wrsPstatsRXPclass5 | 1.3.6.1.4.1.96.100.7.4.1.18 | Counter32 | read-only | Number of received frames assigned to class 5 by packet filter in endpoint |
| C32 wrsPstatsRXPclass6 | 1.3.6.1.4.1.96.100.7.4.1.19 | Counter32 | read-only | Number of received frames assigned to class 6 by packet filter in endpoint |
| C32 wrsPstatsRXPclass7 | 1.3.6.1.4.1.96.100.7.4.1.20 | Counter32 | read-only | Number of received frames assigned to class 7 by packet filter in endpoint |
| C32 wrsPstatsTXFrames | 1.3.6.1.4.1.96.100.7.4.1.21 | Counter32 | read-only | Number of transmitted frames |
| C32 wrsPstatsRXFrames | 1.3.6.1.4.1.96.100.7.4.1.22 | Counter32 | read-only | Number of received frames |
| C32 wrsPstatsRXDropRTUFull | 1.3.6.1.4.1.96.100.7.4.1.23 | Counter32 | read-only | Number of RX frames dropped due to RTU full |
| C32 wrsPstatsRXPrio0 | 1.3.6.1.4.1.96.100.7.4.1.24 | Counter32 | read-only | Number of RX frames at internal priority 0 |
| C32 wrsPstatsRXPrio1 | 1.3.6.1.4.1.96.100.7.4.1.25 | Counter32 | read-only | Number of RX frames at internal priority 1 |
| C32 wrsPstatsRXPrio2 | 1.3.6.1.4.1.96.100.7.4.1.26 | Counter32 | read-only | Number of RX frames at internal priority 2 |
| C32 wrsPstatsRXPrio3 | 1.3.6.1.4.1.96.100.7.4.1.27 | Counter32 | read-only | Number of RX frames at internal priority 3 |
| C32 wrsPstatsRXPrio4 | 1.3.6.1.4.1.96.100.7.4.1.28 | Counter32 | read-only | Number of RX frames at internal priority 4 |
| C32 wrsPstatsRXPrio5 | 1.3.6.1.4.1.96.100.7.4.1.29 | Counter32 | read-only | Number of RX frames at internal priority 5 |
| C32 wrsPstatsRXPrio6 | 1.3.6.1.4.1.96.100.7.4.1.30 | Counter32 | read-only | Number of RX frames at internal priority 6 |
| C32 wrsPstatsRXPrio7 | 1.3.6.1.4.1.96.100.7.4.1.31 | Counter32 | read-only | Number of RX frames at internal priority 7 |
| C32 wrsPstatsRTUValid | 1.3.6.1.4.1.96.100.7.4.1.32 | Counter32 | read-only | Number of valid RTU requests |
| C32 wrsPstatsRTUResponses | 1.3.6.1.4.1.96.100.7.4.1.33 | Counter32 | read-only | Number of valid RTU responses |
| C32 wrsPstatsRTUDropped | 1.3.6.1.4.1.96.100.7.4.1.34 | Counter32 | read-only | Number of frames dropped at RTU |
| C32 wrsPstatsFastMatchPriority | 1.3.6.1.4.1.96.100.7.4.1.35 | Counter32 | read-only | Number of priority frames matched by fast match |
| C32 wrsPstatsFastMatchFastForward | 1.3.6.1.4.1.96.100.7.4.1.36 | Counter32 | read-only | Number of forwarded frames matched by fast match |
| C32 wrsPstatsFastMatchNonForward | 1.3.6.1.4.1.96.100.7.4.1.37 | Counter32 | read-only | Number of not forwarded frames matched by fast match |
| C32 wrsPstatsFastMatchRespValid | 1.3.6.1.4.1.96.100.7.4.1.38 | Counter32 | read-only | Number of fast match decisions |
| C32 wrsPstatsFullMatchRespValid | 1.3.6.1.4.1.96.100.7.4.1.39 | Counter32 | read-only | Number of full match decisions |
| C32 wrsPstatsForwarded | 1.3.6.1.4.1.96.100.7.4.1.40 | Counter32 | read-only | Number of forwarded frames |
| C32 wrsPstatsTRURespValid | 1.3.6.1.4.1.96.100.7.4.1.41 | Counter32 | read-only | Number of TRU decisions |
| wrsPtpDataTable | 1.3.6.1.4.1.96.100.7.5 | not-accessible | Information for each ptp servo | |
| wrsPtpDataEntry | 1.3.6.1.4.1.96.100.7.5.1 | not-accessible | An entry containing ptp servo statuses | |
| U32 wrsPtpDataIndex | 1.3.6.1.4.1.96.100.7.5.1.1 | Unsigned32 | not-accessible | Index for wrsPtpDataTable |
| STR wrsPtpPortName | 1.3.6.1.4.1.96.100.7.5.1.2 | DisplayString | read-only | Port name on which servo instance is running |
| OCT wrsPtpGrandmasterID | 1.3.6.1.4.1.96.100.7.5.1.3 | OCTET STRING | read-only | The ClockID of the current grandmaster |
| OCT wrsPtpOwnID | 1.3.6.1.4.1.96.100.7.5.1.4 | OCTET STRING | read-only | The ClockID of this WR device |
| INT wrsPtpMode | 1.3.6.1.4.1.96.100.7.5.1.5 | INTEGER | read-only | The mode of this clock |
| STR wrsPtpServoState | 1.3.6.1.4.1.96.100.7.5.1.6 | DisplayString | read-only | The servo state if slave |
| INT wrsPtpServoStateN | 1.3.6.1.4.1.96.100.7.5.1.7 | INTEGER | read-only | Numeric representation of servo state |
| INT wrsPtpPhaseTracking | 1.3.6.1.4.1.96.100.7.5.1.8 | INTEGER | read-only | Whether phase tracking is enabled in the servo |
| STR wrsPtpSyncSource | 1.3.6.1.4.1.96.100.7.5.1.9 | DisplayString | read-only | The interface name that is currently the synchronization source |
| C64 wrsPtpClockOffsetPs | 1.3.6.1.4.1.96.100.7.5.1.10 | Counter64 | read-only | Absolute value of current clock offset from master, in picoseconds |
| I32 wrsPtpClockOffsetPsHR | 1.3.6.1.4.1.96.100.7.5.1.11 | Integer32 | read-only | Human Readable current clock offset from master, in picoseconds with saturation to integer |
| I32 wrsPtpSkew | 1.3.6.1.4.1.96.100.7.5.1.12 | Integer32 | read-only | The estimated change of master-to-slave delay, in picoseconds |
| C64 wrsPtpRTT | 1.3.6.1.4.1.96.100.7.5.1.13 | Counter64 | read-only | The round-trip-time, from master, in picoseconds |
| U32 wrsPtpLinkLength | 1.3.6.1.4.1.96.100.7.5.1.14 | Unsigned32 | read-only | Estimated fiber length, from master-to-slave delay, in meters |
| C32 wrsPtpServoUpdates | 1.3.6.1.4.1.96.100.7.5.1.15 | Counter32 | read-only | How many time did the servo run |
| I32 wrsPtpDeltaTxM | 1.3.6.1.4.1.96.100.7.5.1.16 | Integer32 | read-only | Fixed Tx latency on Master side |
| I32 wrsPtpDeltaRxM | 1.3.6.1.4.1.96.100.7.5.1.17 | Integer32 | read-only | Fixed Rx latency on Master side |
| I32 wrsPtpDeltaTxS | 1.3.6.1.4.1.96.100.7.5.1.18 | Integer32 | read-only | Fixed Tx latency on Slave side |
| I32 wrsPtpDeltaRxS | 1.3.6.1.4.1.96.100.7.5.1.19 | Integer32 | read-only | Fixed Rx latency on Slave side |
| C32 wrsPtpServoStateErrCnt | 1.3.6.1.4.1.96.100.7.5.1.20 | Counter32 | read-only | Number of servo updates with wrong servo state |
| C32 wrsPtpClockOffsetErrCnt | 1.3.6.1.4.1.96.100.7.5.1.21 | Counter32 | read-only | Number of servo updates with wrong clock offset |
| C32 wrsPtpRTTErrCnt | 1.3.6.1.4.1.96.100.7.5.1.22 | Counter32 | read-only | Number of servo updates with wrong RTT |
| C64 wrsPtpServoUpdateTime | 1.3.6.1.4.1.96.100.7.5.1.23 | Counter64 | read-only | TAI Nanosecond of the last servo's update |
| INT wrsPtpServoExt | 1.3.6.1.4.1.96.100.7.5.1.24 | INTEGER | read-only | Extension with which the servo runs. |
| wrsPortStatusTable | 1.3.6.1.4.1.96.100.7.6 | not-accessible | Information for each port | |
| wrsPortStatusEntry | 1.3.6.1.4.1.96.100.7.6.1 | not-accessible | An entry containing ports statuses | |
| U32 wrsPortStatusIndex | 1.3.6.1.4.1.96.100.7.6.1.1 | Unsigned32 | not-accessible | Index for wrsPortStatusTable |
| STR wrsPortStatusPortName | 1.3.6.1.4.1.96.100.7.6.1.2 | DisplayString | read-only | Name of port |
| INT wrsPortStatusLink | 1.3.6.1.4.1.96.100.7.6.1.3 | INTEGER | read-only | Whether the link is up or down |
| INT wrsPortStatusConfiguredMode | 1.3.6.1.4.1.96.100.7.6.1.4 | INTEGER | read-only | Whether the port is configured as master, slave, non-wr or auto |
| INT wrsPortStatusLocked | 1.3.6.1.4.1.96.100.7.6.1.5 | INTEGER | read-only | Whether the peers are locked or not |
| OCT wrsPortStatusPeer | 1.3.6.1.4.1.96.100.7.6.1.6 | OCTET STRING | read-only | the ClockID of the peer, if available. Or 0 |
| STR wrsPortStatusSfpVN | 1.3.6.1.4.1.96.100.7.6.1.7 | DisplayString | read-only | Vendor Name of SFP |
| STR wrsPortStatusSfpPN | 1.3.6.1.4.1.96.100.7.6.1.8 | DisplayString | read-only | Part Number of SFP |
| STR wrsPortStatusSfpVS | 1.3.6.1.4.1.96.100.7.6.1.9 | DisplayString | read-only | Vendor serial number of SFP |
| INT wrsPortStatusSfpInDB | 1.3.6.1.4.1.96.100.7.6.1.10 | INTEGER | read-only | Whether the SFP is in data base or not |
| INT wrsPortStatusSfpGbE | 1.3.6.1.4.1.96.100.7.6.1.11 | INTEGER | read-only | Whether the SFP is 1 GbE |
| INT wrsPortStatusSfpError | 1.3.6.1.4.1.96.100.7.6.1.12 | INTEGER | read-only | Problem with SFP configuration. Port has to be always 1GbE. Port has to be in data base as long as support WR. |
| C32 wrsPortStatusPtpTxFrames | 1.3.6.1.4.1.96.100.7.6.1.13 | Counter32 | read-only | Number of transmitted PTP frames per port (for all PPSI instances running on particular port |
| C32 wrsPortStatusPtpRxFrames | 1.3.6.1.4.1.96.100.7.6.1.14 | Counter32 | read-only | Number of received PTP frames per port (for all PPSI instances running on particular port |
| INT wrsPortStatusMonitor | 1.3.6.1.4.1.96.100.7.6.1.15 | INTEGER | read-only | If disable, SNMP will not generate any errors for this port. |
| INT wrsPortStatusSfpDom | 1.3.6.1.4.1.96.100.7.6.1.16 | INTEGER | read-only | SFP plugged into a given port has extra monitoring (DOM) capabilities. |
| I32 wrsPortStatusSfpTemp | 1.3.6.1.4.1.96.100.7.6.1.17 | Integer32 | read-only | Temperature reported by SFP. According to SFF-8472, accuracy of this value must be better than 3 degrees Celsius |
| I32 wrsPortStatusSfpVcc | 1.3.6.1.4.1.96.100.7.6.1.18 | Integer32 | read-only | Internally measured transceiver supply voltage reported by SFP. According to SFF-8472, accuracy of this value must be better than 3% |
| I32 wrsPortStatusSfpTxBias | 1.3.6.1.4.1.96.100.7.6.1.19 | Integer32 | read-only | Measured TX bias current in uA reported by SFP. According to SFF-8472, accuracy of this value must be better than 10% |
| I32 wrsPortStatusSfpTxPower | 1.3.6.1.4.1.96.100.7.6.1.20 | Integer32 | read-only | Measured TX output power in uW reported by SFP. According to SFF-8472, accuracy of this value must be better than 3dB% |
| I32 wrsPortStatusSfpRxPower | 1.3.6.1.4.1.96.100.7.6.1.21 | Integer32 | read-only | Measured RX output power in uW reported by SFP. According to SFF-8472, accuracy of this value must be better than 3dB% |
| I32 wrsPortStatusT24p | 1.3.6.1.4.1.96.100.7.6.1.22 | Integer32 | read-only | T2/T4 phase transition point used for Rx timestamps correction |
| INT wrsPortStatusT24pValid | 1.3.6.1.4.1.96.100.7.6.1.23 | INTEGER | read-only | Validity of wrsPortStatusT24p |
| wrsPstatsHCTable | 1.3.6.1.4.1.96.100.7.7 | not-accessible | Pstats counters for each port | |
| wrsPstatsHCEntry | 1.3.6.1.4.1.96.100.7.7.1 | not-accessible | An entry containing pstats counters | |
| U32 wrsPstatsHCIndex | 1.3.6.1.4.1.96.100.7.7.1.1 | Unsigned32 | not-accessible | Index for wrsPstatsHCTable |
| STR wrsPstatsHCPortName | 1.3.6.1.4.1.96.100.7.7.1.2 | DisplayString | read-only | Port name of port |
| C64 wrsPstatsHCTXUnderrun | 1.3.6.1.4.1.96.100.7.7.1.3 | Counter64 | read-only | Number of TX underrun errors |
| C64 wrsPstatsHCRXOverrun | 1.3.6.1.4.1.96.100.7.7.1.4 | Counter64 | read-only | Number of RX overrun errors |
| C64 wrsPstatsHCRXInvalidCode | 1.3.6.1.4.1.96.100.7.7.1.5 | Counter64 | read-only | Number of received invalid 8B10B code errors |
| C64 wrsPstatsHCRXSyncLost | 1.3.6.1.4.1.96.100.7.7.1.6 | Counter64 | read-only | Number of RX link synchronization lost |
| C64 wrsPstatsHCRXPauseFrames | 1.3.6.1.4.1.96.100.7.7.1.7 | Counter64 | read-only | Number of received pause frames |
| C64 wrsPstatsHCRXPfilterDropped | 1.3.6.1.4.1.96.100.7.7.1.8 | Counter64 | read-only | Number of received frames dropped at pfilter |
| C64 wrsPstatsHCRXPCSErrors | 1.3.6.1.4.1.96.100.7.7.1.9 | Counter64 | read-only | Number of errors occurred during frame reception in PCS |
| C64 wrsPstatsHCRXGiantFrames | 1.3.6.1.4.1.96.100.7.7.1.10 | Counter64 | read-only | Number of received giant frames (bigger than Maximum Receive Unit) |
| C64 wrsPstatsHCRXRuntFrames | 1.3.6.1.4.1.96.100.7.7.1.11 | Counter64 | read-only | Number of received runt frames (smaller than 64bytes) |
| C64 wrsPstatsHCRXCRCErrors | 1.3.6.1.4.1.96.100.7.7.1.12 | Counter64 | read-only | Number of RX CRC errors |
| C64 wrsPstatsHCRXPclass0 | 1.3.6.1.4.1.96.100.7.7.1.13 | Counter64 | read-only | Number of received frames assigned to class 0 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass1 | 1.3.6.1.4.1.96.100.7.7.1.14 | Counter64 | read-only | Number of received frames assigned to class 1 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass2 | 1.3.6.1.4.1.96.100.7.7.1.15 | Counter64 | read-only | Number of received frames assigned to class 2 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass3 | 1.3.6.1.4.1.96.100.7.7.1.16 | Counter64 | read-only | Number of received frames assigned to class 3 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass4 | 1.3.6.1.4.1.96.100.7.7.1.17 | Counter64 | read-only | Number of received frames assigned to class 4 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass5 | 1.3.6.1.4.1.96.100.7.7.1.18 | Counter64 | read-only | Number of received frames assigned to class 5 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass6 | 1.3.6.1.4.1.96.100.7.7.1.19 | Counter64 | read-only | Number of received frames assigned to class 6 by packet filter in endpoint |
| C64 wrsPstatsHCRXPclass7 | 1.3.6.1.4.1.96.100.7.7.1.20 | Counter64 | read-only | Number of received frames assigned to class 7 by packet filter in endpoint |
| C64 wrsPstatsHCTXFrames | 1.3.6.1.4.1.96.100.7.7.1.21 | Counter64 | read-only | Number of transmitted frames |
| C64 wrsPstatsHCRXFrames | 1.3.6.1.4.1.96.100.7.7.1.22 | Counter64 | read-only | Number of received frames |
| C64 wrsPstatsHCRXDropRTUFull | 1.3.6.1.4.1.96.100.7.7.1.23 | Counter64 | read-only | Number of RX frames dropped due to RTU full |
| C64 wrsPstatsHCRXPrio0 | 1.3.6.1.4.1.96.100.7.7.1.24 | Counter64 | read-only | Number of RX frames at internal priority 0 |
| C64 wrsPstatsHCRXPrio1 | 1.3.6.1.4.1.96.100.7.7.1.25 | Counter64 | read-only | Number of RX frames at internal priority 1 |
| C64 wrsPstatsHCRXPrio2 | 1.3.6.1.4.1.96.100.7.7.1.26 | Counter64 | read-only | Number of RX frames at internal priority 2 |
| C64 wrsPstatsHCRXPrio3 | 1.3.6.1.4.1.96.100.7.7.1.27 | Counter64 | read-only | Number of RX frames at internal priority 3 |
| C64 wrsPstatsHCRXPrio4 | 1.3.6.1.4.1.96.100.7.7.1.28 | Counter64 | read-only | Number of RX frames at internal priority 4 |
| C64 wrsPstatsHCRXPrio5 | 1.3.6.1.4.1.96.100.7.7.1.29 | Counter64 | read-only | Number of RX frames at internal priority 5 |
| C64 wrsPstatsHCRXPrio6 | 1.3.6.1.4.1.96.100.7.7.1.30 | Counter64 | read-only | Number of RX frames at internal priority 6 |
| C64 wrsPstatsHCRXPrio7 | 1.3.6.1.4.1.96.100.7.7.1.31 | Counter64 | read-only | Number of RX frames at internal priority 7 |
| C64 wrsPstatsHCRTUValid | 1.3.6.1.4.1.96.100.7.7.1.32 | Counter64 | read-only | Number of valid RTU requests |
| C64 wrsPstatsHCRTUResponses | 1.3.6.1.4.1.96.100.7.7.1.33 | Counter64 | read-only | Number of valid RTU responses |
| C64 wrsPstatsHCRTUDropped | 1.3.6.1.4.1.96.100.7.7.1.34 | Counter64 | read-only | Number of frames dropped at RTU |
| C64 wrsPstatsHCFastMatchPriority | 1.3.6.1.4.1.96.100.7.7.1.35 | Counter64 | read-only | Number of priority frames matched by fast match |
| C64 wrsPstatsHCFastMatchFastForward | 1.3.6.1.4.1.96.100.7.7.1.36 | Counter64 | read-only | Number of forwarded frames matched by fast match |
| C64 wrsPstatsHCFastMatchNonForward | 1.3.6.1.4.1.96.100.7.7.1.37 | Counter64 | read-only | Number of not forwarded frames matched by fast match |
| C64 wrsPstatsHCFastMatchRespValid | 1.3.6.1.4.1.96.100.7.7.1.38 | Counter64 | read-only | Number of fast match decisions |
| C64 wrsPstatsHCFullMatchRespValid | 1.3.6.1.4.1.96.100.7.7.1.39 | Counter64 | read-only | Number of full match decisions |
| C64 wrsPstatsHCForwarded | 1.3.6.1.4.1.96.100.7.7.1.40 | Counter64 | read-only | Number of forwarded frames |
| C64 wrsPstatsHCTRURespValid | 1.3.6.1.4.1.96.100.7.7.1.41 | Counter64 | read-only | Number of TRU decisions |
| C64 wrsPstatsHCNICTXFrames | 1.3.6.1.4.1.96.100.7.7.1.42 | Counter64 | read-only | Number of TX frames coming from CPU |
| wrsPtpInstanceTable | 1.3.6.1.4.1.96.100.7.8 | not-accessible | Pstats counters for each port | |
| wrsPtpInstanceEntry | 1.3.6.1.4.1.96.100.7.8.1 | not-accessible | An entry containing pstats counters | |
| U32 wrsPtpInstancePortIndex | 1.3.6.1.4.1.96.100.7.8.1.1 | Unsigned32 | not-accessible | Index for wrsPtpInstanceTable |
| U32 wrsPtpInstanceOnPortIndex | 1.3.6.1.4.1.96.100.7.8.1.2 | Unsigned32 | not-accessible | Index for wrsPtpInstanceTable |
| STR wrsPtpInstanceName | 1.3.6.1.4.1.96.100.7.8.1.3 | DisplayString | read-only | Name of an instance |
| I32 wrsPtpInstancePort | 1.3.6.1.4.1.96.100.7.8.1.4 | Integer32 | read-only | Port number on which an instance is running |
| I32 wrsPtpInstancePortInstance | 1.3.6.1.4.1.96.100.7.8.1.5 | Integer32 | read-only | Index of an instance running on a port |
| STR wrsPtpInstancePortName | 1.3.6.1.4.1.96.100.7.8.1.6 | DisplayString | read-only | Port name of port |
| INT wrsPtpInstanceState | 1.3.6.1.4.1.96.100.7.8.1.7 | INTEGER | read-only | Name of instance |
| INT wrsPtpInstanceMasterOnly | 1.3.6.1.4.1.96.100.7.8.1.8 | INTEGER | read-only | MasterOnly feature enabled/disabled |
| INT wrsPtpInstanceExtPortCfgDesSt | 1.3.6.1.4.1.96.100.7.8.1.9 | INTEGER | read-only | DesiredState to be used if/when externalPortConfiguration feature is enabled |
| INT wrsPtpInstanceMechanism | 1.3.6.1.4.1.96.100.7.8.1.10 | INTEGER | read-only | Delay Mechanism type used by PTP Instance |
| INT wrsPtpInstanceProfile | 1.3.6.1.4.1.96.100.7.8.1.11 | INTEGER | read-only | Profile/Extension configured on a PTP Instance |
| INT wrsPtpInstanceExtension | 1.3.6.1.4.1.96.100.7.8.1.12 | INTEGER | read-only | Extension used on the PTP Instance |
| INT wrsPtpInstanceAsymEnabled | 1.3.6.1.4.1.96.100.7.8.1.13 | INTEGER | read-only | Asymmetry Corrections enabled/disabled on the PTP Instance |
| C64 wrsPtpInstanceAsymConstAsymPS | 1.3.6.1.4.1.96.100.7.8.1.14 | Counter64 | read-only | Constant Asymmetry in picoseconds |
| C64 wrsPtpInstanceAsymScDelayCoef | 1.3.6.1.4.1.96.100.7.8.1.15 | Counter64 | read-only | Scaled Relative Delay Coefficient |
| STR wrsPtpInstanceAsymScDelayCoefHR | 1.3.6.1.4.1.96.100.7.8.1.16 | DisplayString | read-only | Relative Delay Coefficient in a floating form |
| C64 wrsPtpInstanceTSCorrEgressLatPS | 1.3.6.1.4.1.96.100.7.8.1.17 | Counter64 | read-only | Egress Latency (Tx Fixed Delay) in picoseconds |
| C64 wrsPtpInstanceTSCorrIngLatPS | 1.3.6.1.4.1.96.100.7.8.1.18 | Counter64 | read-only | Ingress Latency (Rx Fixed Delay) in picoseconds |
| C64 wrsPtpInstanceTSCorrSemistLatPS | 1.3.6.1.4.1.96.100.7.8.1.19 | Counter64 | read-only | Semi-static latency (bitslide) in picoseconds |
| INT wrsPtpInstanceProtoDetectState | 1.3.6.1.4.1.96.100.7.8.1.20 | INTEGER | read-only | Protocol detection state |
| INT wrsPtpInstanceExtState | 1.3.6.1.4.1.96.100.7.8.1.21 | INTEGER | read-only | State of PTP extension (more than one are allowed per 1 physical port) |
| PHY wrsPtpInstancePeerMac | 1.3.6.1.4.1.96.100.7.8.1.22 | PhysAddress | read-only | MAC used by an instance |
| I32 wrsPtpInstancePeerVid | 1.3.6.1.4.1.96.100.7.8.1.23 | Integer32 | read-only | VID used by an instance |
| I32 wrsPtpInstanceVlanNum | 1.3.6.1.4.1.96.100.7.8.1.24 | Integer32 | read-only | Number of VLANs used by an instance |
| STR wrsPtpInstanceVlanListStr | 1.3.6.1.4.1.96.100.7.8.1.25 | DisplayString | read-only | Comma separated list of VLANs used by an instance |
| INT wrsPtpInstanceStatusError | 1.3.6.1.4.1.96.100.7.8.1.26 | INTEGER | read-only | PTP instance status error ok - all SFPs are ok error - there is an error in SFP warningNA - at least one field is equal to 0 (NA), shouldn't happen in normal operation |
RFC description
Manages White Rabbit Switch internal details including port status, clock synchronization, and PTP instance information for precision timing applications.
Start monitoring CERN White Rabbit precision-timing switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.