WR-SWITCH-MIB :: wrsBootLoadLM32

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › WR-SWITCH-MIB › wrsBootLoadLM32

wrsBootLoadLM32

Module: WR-SWITCH-MIB

OID (symbolic): WR-SWITCH-MIB::wrsBootLoadLM32

OID (numeric): 1.3.6.1.4.1.96.100.7.1.2.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Result of loading LM32 ok - LM32 loaded successfully error - loading failed errorMinor - cannot read status file, problem is probably somewhere else fileNotFound - file to be loaded not found

What is wrsBootLoadLM32?

Result of loading firmware into the LM32 soft-core processor embedded in the FPGA at boot, with fileNotFound(4) again separating a missing image file from a load failure. This matters because the LM32 core runs low-level WR timing functions independently of the main Linux CPU.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.96.100.7.1.2.12
snmpwalk -v2c -c public <target> WR-SWITCH-MIB::wrsBootLoadLM32

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.96.100.7.1.2.12.1
snmpget -v2c -c public <target> WR-SWITCH-MIB::wrsBootLoadLM32.1

Start monitoring CERN White Rabbit precision-timing switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WR-SWITCH-MIB::wrsBootLoadLM32 OID value, configure state conditions and alerts, and monitor any CERN White Rabbit precision-timing switches from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.96cernWR-SWITCH-MIB
1.3.6.1.4.1.96.100wrSwitchMIBWR-SWITCH-MIB
1.3.6.1.4.1.96.100.7wrsExpertStatusWR-SWITCH-MIB
1.3.6.1.4.1.96.100.7.1wrsOperationStatusWR-SWITCH-MIB
1.3.6.1.4.1.96.100.7.1.2wrsBootStatusGroupWR-SWITCH-MIB
1.3.6.1.4.1.96.100.7.1.2.12wrsBootLoadLM32WR-SWITCH-MIB