All MIBs › WR-SWITCH-MIB › wrsPortStatusSfpRxPower

wrsPortStatusSfpRxPower

OID (symbolic): WR-SWITCH-MIB::wrsPortStatusSfpRxPower

OID (numeric): 1.3.6.1.4.1.96.100.7.6.1.21

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: Measured RX output power in uW reported by SFP. According to SFF-8472, accuracy of this value must be better than 3dB%

What is wrsPortStatusSfpRxPower?

Measured optical RX input power of the SFP in this port, in microwatts, accurate to within about 3dB per SFF-8472. A low or dropping value relative to the link partner's TX power points to fiber attenuation, a dirty connector, or excessive cable length.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.96.100.7.6.1.21
snmpwalk -v2c -c public <target> WR-SWITCH-MIB::wrsPortStatusSfpRxPower

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.96.100.7.6.1.21.1
snmpget -v2c -c public <target> WR-SWITCH-MIB::wrsPortStatusSfpRxPower.1

Start monitoring CERN White Rabbit precision-timing switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WR-SWITCH-MIB::wrsPortStatusSfpRxPower OID value, configure state conditions and alerts, and monitor any CERN White Rabbit precision-timing switches from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.96	cern	WR-SWITCH-MIB
1.3.6.1.4.1.96.100	wrSwitchMIB	WR-SWITCH-MIB
1.3.6.1.4.1.96.100.7	wrsExpertStatus	WR-SWITCH-MIB
1.3.6.1.4.1.96.100.7.6	wrsPortStatusTable	WR-SWITCH-MIB
1.3.6.1.4.1.96.100.7.6.1	wrsPortStatusEntry	WR-SWITCH-MIB
1.3.6.1.4.1.96.100.7.6.1.21	wrsPortStatusSfpRxPower	WR-SWITCH-MIB

WR-SWITCH-MIB :: wrsPortStatusSfpRxPower

wrsPortStatusSfpRxPower

Module

This MIB depends on