| OID symbolic | OID numeric | Type | Access | Description |
|---|
| wlsxPoEMIB | 1.3.6.1.4.1.14823.2.2.1.18 | | | This MIB module defines MIB objects which provide
information about the Power Sourcing Equipment(PSE)
and Powered Device(PD).
The following abbreviations are defined in [IEEE-802.3af] and
will be used with the same significance in this document:
PSE - Power Sourcing Equipment;
PD - Powered Device; |
| wlsxPoEMIBNotifications | 1.3.6.1.4.1.14823.2.2.1.18.0 | | | |
| NTF wlsxTrapInterfacePoEState | 1.3.6.1.4.1.14823.2.2.1.18.0.1 | | | When there is a PoE state transition i.e on or off then this trap
is sent to the management entity |
| wlsxPoEMIBObjects | 1.3.6.1.4.1.14823.2.2.1.18.1 | | | |
| wlsxPsePortTable | 1.3.6.1.4.1.14823.2.2.1.18.1.1 | | not-accessible | A table of objects that display the parameters configured
for a power ethernet port. |
| wlsxPsePortEntry | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1 | | not-accessible | A set of objects that display the configuration of a power
ethernet port. |
| I32 wlsxPsePortIndex | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.1 | Integer32 | not-accessible | This variable uniquely identifies the power
ethernet port for which this entry
is populated. |
| INT wlsxPsePortAdminStatus | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.2 | INTEGER | read-only | Admin status of a power ethernet port.
A value of enable(1) means that the port
has PSE functions enabled on it.
A value of disable(2) means that the port
does not support or has disabled PSE
functions. |
| INT wlsxPsePortState | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.3 | INTEGER | read-only | This object indicates the status of the port.
The reason for these states is indicated by wlsxPsePortStatus.
on(1) - indicates that PSE is sourcing power.
off(2) - indicates that PSE is not sourcing power. |
| INT wlsxPsePortStatus | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4 | INTEGER | read-only | This object indicates the status of the port.
unknown(1) - indicates either a state of off with the
reason being not known or the state is
on.
offAdmin(2) - indicates the port is administratively
disabled.
offPowerManagement(3) - indicates the port is off due to power
management.
offIllegalClass(4) - indicates the port is off because the PD
is of illegal class.
offDetectionProgress(5)- indicates the port is off because the PD
detection is in progress.
offHardwareError(6) - indicates the port is off because of
hardware error.
offNonStandardPd(7) - indicates the port is off because the PD
is a non standard one. |
| INT wlsxPsePortDiscoveryMode | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 | INTEGER | read-only | This object indicates the method of discovery used
by the system for the detection of the Powered Device(PD).
A value of unknown(0) means that the discovery method
is unknown on this port.
A value of off(1) means that the discovery method
is turned off on this port.
A value of ieee(2) indicates that the discovery method
is IEEE based on this port.
A value of cisco(3) indicates that the discovery method
is Cisco based on this port. |
| T/F wlsxPsePortIsPdDetected | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.6 | TruthValue | read-only | This object indicates if a Powered Device(PD) is
detected on this port. |
| T/F wlsxPsePortIsIeeePd | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.7 | TruthValue | read-only | This object indicates the IEEE compliance of a
Powered Device(PD).
A value of true(1) means the Powered Device(PD)
is IEEE compliant.
A value of false(2) means the Powered Device is
not IEEE compliant. |
| INT wlsxPsePortPdClass | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.8 | INTEGER | read-only | This object indicates the Power classification of the
Powered Device(PD) connected on the port.
A value of 'class0(1)' indicates that the power
classification of the powered device falls into
class 0 in IEEE specifications.
A value of 'class1(2)' indicates that the power
classification of the powered devices falls into
class 1 in IEEE specifications.
A value of 'class2(3)' indicates that the power
classification of the powered devices falls into
class 2 in IEEE specifications.
A value of 'class3(4)' indicates that the power
classification of the powered devices falls into
class 3 in IEEE specifications.
A value of 'class4(5)' indicates that the power
classification of the powered devices falls into
class 4 in IEEE specifications. |
| INT wlsxPsePortPriority | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.9 | INTEGER | read-only | This object indicates the configured priority for this port.
low(1) - indicates the priority of the port is low.
high(2) - indicates the priority of the port is high.
critical(3) - indicates the priority of the port is critical. |
| I32 wlsxPsePortDefaultPowerMax | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.10 | Integer32 | read-only | This object indicates the default maximum power available
on this port. |
| I32 wlsxPsePortPowerAllocated | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.11 | Integer32 | read-only | This object indicates the configured power allocation
on this port. |
| I32 wlsxPsePortPowerConsumed | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.12 | Integer32 | read-only | This object gives the power consumption by the PD on this port. |
| I32 wlsxPsePortVoltage | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.13 | Integer32 | read-only | This object indicates the voltage on this port. |
| I32 wlsxPsePortCurrent | 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.14 | Integer32 | read-only | This object indicates the current on this port. |
| wlsxPseSlotTable | 1.3.6.1.4.1.14823.2.2.1.18.1.2 | | not-accessible | A table of objects that display all the details about the
Power Sourcing Equipment(PSE). |
| wlsxPseSlotEntry | 1.3.6.1.4.1.14823.2.2.1.18.1.2.1 | | not-accessible | A set of objects that displays all the information about
the PSE on this device on a per slot basis. |
| I32 wlsxPseSlotIndex | 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.1 | Integer32 | not-accessible | This object uniquely identifies a PSE entry. |
| I32 wlsxPseSlotPowerAvailable | 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.2 | Integer32 | read-only | This object indicates the total amount of power
available from this PSE. |
| I32 wlsxPseSlotPowerConsumption | 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.3 | Integer32 | read-only | This object indicates the total amount of power consumed
from this PSE. |
| I32 wlsxPseSlotGuardBand | 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.4 | Integer32 | read-only | This object indicates the power left unused to be provided
in case of spikes in the amount of power used. |
| INT wlsxPseSlotPoEManagementMode | 1.3.6.1.4.1.14823.2.2.1.18.1.2.1.5 | INTEGER | read-only | This object indicates the PSE management mode.
A value of dynamic(1) indicates that it is
dynamic power management.
A value of static(2) indicates that it is
static power management.
A value of class(3) indicates that it is a
Class based power management. |
| wlsxPoEMIBConformance | 1.3.6.1.4.1.14823.2.2.1.18.2 | | | |
| wlsxPoEMIBCompliances | 1.3.6.1.4.1.14823.2.2.1.18.2.1 | | | |
| wlsxPoEMIBCompliance | 1.3.6.1.4.1.14823.2.2.1.18.2.1.1 | | | This is the statement of compliance. |
| wlsxPoEMIBGroups | 1.3.6.1.4.1.14823.2.2.1.18.2.2 | | | |
| wlsxPoEMIBPortGroup | 1.3.6.1.4.1.14823.2.2.1.18.2.2.1 | | | This group provides the details of all the
Power ethernet ports on the device. |
| wlsxPoEMIBMainPseGroup | 1.3.6.1.4.1.14823.2.2.1.18.2.2.2 | | | This group provides the details of the PSE
entry. |
| wlsxPoEMIBNotificationsGroup | 1.3.6.1.4.1.14823.2.2.1.18.2.2.3 | | | This group gives the collection of Notifications
related to power consumption on an port. |
