All MIBs › WLSX-SWITCH-MIB
Organization: Aruba Wireless Networks
Last Updated: 2008-04-16
Category: Aruba Wireless Networking
Description:
Manages Aruba wireless LAN controller switch configuration, VLAN settings, and wired infrastructure status.
Imported Objects
From ARUBA-MIB
| wlsxEnterpriseMibModules | OBJECT-IDENTITY |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| snmpModules |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| PhysAddress | |
| RowStatus | |
| StorageType | |
| TAddress | |
| TDomain | |
| TEXTUAL-CONVENTION | |
| TestAndIncr | |
| TimeInterval | |
| TruthValue |
What Is WLSX-SWITCH-MIB?
WLSX-SWITCH-MIB is Aruba Networks' core system-level MIB for its wireless LAN controllers/switches, covering general controller configuration, hardware environmental status, authentication server settings, and wireless security event traps. It exposes authentication server configuration, hardware health sensors (fan, line card presence, voltage, temperature), process-level status, and wireless security data such as station MAC tracking, blacklisting, and spoofed-address detection. This is a strong hardware/software health MIB: it directly covers fan status, voltage levels, temperature readings, and running process names, making it central to monitoring the physical and software health of an Aruba controller chassis. No specific external MIB dependency is apparent from the module description beyond standard SNMP trap conventions used by wlsxSwitchTrapObjectsGroup. It is deployed on Aruba wireless LAN controllers/switches in enterprise campus Wi-Fi networks requiring both hardware health monitoring and wireless intrusion/security event tracking. Engineers can download the WLSX-SWITCH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in WLSX-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- fan status
- temperature readings
- voltage levels
- line card presence
- process status
- wireless client blacklist/spoofing security events
Supported Devices
- Aruba wireless LAN controller/switch
Monitoring Examples
An administrator would poll wlsxFanNumber and wlsxTemperatureValue alongside wlsxVoltageType/wlsxVoltageValue to catch a failing fan, overheating chassis, or out-of-range power supply voltage before it causes an outage, and check wlsxLineCardNumber and wlsxProcessName to confirm expected hardware modules and software processes are present and running. A trap carrying wlsxStationMacAddress and wlsxStationBlackListReason, or wlsxSpoofedIpAddress and wlsxSpoofedOldPhyAddress, would alert security staff to a blacklisted client or a detected address-spoofing attack on the wireless network.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| wlsxSwitchMIB | 1.3.6.1.4.1.14823.2.2.1.1 | This MIB module defines MIB objects which provide System level information about the Aruba switches. | ||
| wlsxSystemXGroup | 1.3.6.1.4.1.14823.2.2.1.1.1 | |||
| STR wlsxHostname | 1.3.6.1.4.1.14823.2.2.1.1.1.1 | DisplayString | read-only | Name of the switch. |
| STR wlsxModelName | 1.3.6.1.4.1.14823.2.2.1.1.1.2 | DisplayString | read-only | Model Name of the switch. |
| IP wlsxSwitchIp | 1.3.6.1.4.1.14823.2.2.1.1.1.3 | IpAddress | read-only | Switch IP as configured by the user. This IP address uniquely identifies the switch. |
| INT wlsxSwitchRole | 1.3.6.1.4.1.14823.2.2.1.1.1.4 | INTEGER | read-only | Role of this switch in the Switch Domain. |
| IP wlsxSwitchMasterIp | 1.3.6.1.4.1.14823.2.2.1.1.1.5 | IpAddress | read-only | Master IP of the switch |
| wlsxSwitchListTable | 1.3.6.1.4.1.14823.2.2.1.1.1.6 | not-accessible | This Table will list all the switches in the Switch Domain. It will be populated only on the master switch. Local switches return empty table. | |
| wlsxSwitchListEntry | 1.3.6.1.4.1.14823.2.2.1.1.1.6.1 | not-accessible | Switch List Entry | |
| IP switchListSwitchIPAddress | 1.3.6.1.4.1.14823.2.2.1.1.1.6.1.1 | IpAddress | not-accessible | IP Address of the switch. |
| INT switchListSwitchRole | 1.3.6.1.4.1.14823.2.2.1.1.1.6.1.2 | INTEGER | read-only | Role of the Switch. |
| I32 wlsxSwitchLicenseCount | 1.3.6.1.4.1.14823.2.2.1.1.1.7 | Integer32 | read-only | The number of licenses installed on the switch |
| wlsxSwitchLicenseTable | 1.3.6.1.4.1.14823.2.2.1.1.1.8 | not-accessible | This table lists all licenses installed on the switch. | |
| wlsxLicenseEntry | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1 | not-accessible | License Entry | |
| I32 licenseIndex | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1 | Integer32 | not-accessible | License ID number |
| STR licenseKey | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2 | DisplayString | read-only | License Key |
| STR licenseInstalled | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3 | DisplayString | read-only | License installation time |
| STR licenseExpires | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4 | DisplayString | read-only | License expiry time |
| STR licenseFlags | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5 | DisplayString | read-only | License flags; E - enabled; A - auto-generated; R - reboot required to activate |
| STR licenseService | 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.6 | DisplayString | read-only | The service enabled by this license. |
| wlsxSysXProcessorTable | 1.3.6.1.4.1.14823.2.2.1.1.1.9 | not-accessible | The table of processors contained by the switch. | |
| wlsxSysXProcessorEntry | 1.3.6.1.4.1.14823.2.2.1.1.1.9.1 | not-accessible | An entry for one processor contained by the switch. | |
| I32 sysXProcessorID | 1.3.6.1.4.1.14823.2.2.1.1.1.9.1.1 | Integer32 | not-accessible | Processor Index. |
| STR sysXProcessorDescr | 1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2 | DisplayString | read-only | description of the processor. |
| I32 sysXProcessorLoad | 1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3 | Integer32 | read-only | The average, over the last minute, of the percentage of time that this processor was not idle. |
| wlsxSysXStorageTable | 1.3.6.1.4.1.14823.2.2.1.1.1.10 | not-accessible | The table of Storage-devices contained by the switch. | |
| wlsxSysXStorageEntry | 1.3.6.1.4.1.14823.2.2.1.1.1.10.1 | not-accessible | An entry for one long-term storage device contained by the switch. | |
| I32 sysXStorageIndex | 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1 | Integer32 | not-accessible | |
| INT sysXStorageType | 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2 | INTEGER | read-only | |
| I32 sysXStorageSize | 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3 | Integer32 | read-only | size of the storage filesystem in MB. |
| I32 sysXStorageUsed | 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.4 | Integer32 | read-only | size of the storage filesystem in MB. |
| STR sysXStorageName | 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.5 | DisplayString | read-only | name of the storage filesystem. |
| wlsxSysXMemoryTable | 1.3.6.1.4.1.14823.2.2.1.1.1.11 | not-accessible | The memory status of the switch | |
| wlsxSysXMemoryEntry | 1.3.6.1.4.1.14823.2.2.1.1.1.11.1 | not-accessible | An entry for one memory region on the switch. Currently, only the CP region is monitored. | |
| I32 sysXMemoryIndex | 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1 | Integer32 | not-accessible | |
| I32 sysXMemorySize | 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2 | Integer32 | read-only | Total memory in KB. |
| I32 sysXMemoryUsed | 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3 | Integer32 | read-only | Used memory in KB. |
| I32 sysXMemoryFree | 1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 | Integer32 | read-only | Free memory in KB. |
| STR wlsxSwitchLicenseSerialNumber | 1.3.6.1.4.1.14823.2.2.1.1.1.12 | DisplayString | read-only | The license serial number of the switch |
| wlsxUserInfoGroup | 1.3.6.1.4.1.14823.2.2.1.1.2 | |||
| wlsxSwitchUserTable | 1.3.6.1.4.1.14823.2.2.1.1.2.1 | not-accessible | This Table lists all the users (both wired and wireless) currently connected to the switch. Users are identified by their IP address. | |
| wlsxSwitchUserEntry | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1 | not-accessible | User Entry | |
| IP userIpAddress | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.1 | IpAddress | not-accessible | IP Address from which the user connected to the switch. |
| MAC userPhyAddress | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.2 | MacAddress | read-only | Physical Address of the station from which the user connected to the switch. |
| STR userName | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.3 | DisplayString | read-only | Name of the User. |
| STR userRole | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.4 | DisplayString | read-only | The Role configured for this user. |
| TIK userUpTime | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.5 | TimeTicks | read-only | Time since the user is connected to the switch. |
| INT userAuthenticationMethod | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.6 | INTEGER | read-only | Authentication mechanism used by the user to connect to the switch. |
| STR userLocation | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.7 | DisplayString | read-only | Location of the access point (in Building.Floor.... format), which the user used to connect to the switch. |
| STR userServerName | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.8 | DisplayString | read-only | Name of the Back-end authentication server, used to authenticate the user. |
| I32 userConnectedVlan | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.9 | Integer32 | read-only | Vlan on which the user is connected to the switch. |
| I32 userConnectedSlot | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.10 | Integer32 | read-only | Slot on switch, where the user connection terminates. |
| I32 userConnectedPort | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.11 | Integer32 | read-only | Port on switch, where the user connection terminates. |
| STR userBWContractName | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.12 | DisplayString | read-only | Name of the Bandwidth Contract applied to this user. |
| INT userBWContractUsage | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.13 | INTEGER | read-only | Indicates how the Bandwidth Contract is used. |
| I32 userConnectedModule | 1.3.6.1.4.1.14823.2.2.1.1.2.1.1.14 | Integer32 | read-only | The module to which the user is connected, if wired. |
| wlsxSwitchStationMgmtTable | 1.3.6.1.4.1.14823.2.2.1.1.2.2 | not-accessible | This Table lists all the wireless stations associated with the Access points connected to this switch. | |
| wlsxSwitchStationMgmtEntry | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1 | not-accessible | Station Management Entry | |
| MAC staPhyAddress | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.1 | MacAddress | not-accessible | The Physical Address of the Station. |
| MAC staAccessPointBSSID | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.2 | MacAddress | not-accessible | BSSID of the Access point through which the station is connected to the switch |
| STR staUserName | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.3 | DisplayString | read-only | Name of the User connecting from this station. |
| STR staUserRole | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.4 | DisplayString | read-only | User Role. |
| U32 staAssociationID | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.5 | Unsigned32 | read-only | AID with which the Station is associated with this system. |
| STR staAccessPointESSID | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.6 | DisplayString | read-only | ESSID of the Access point |
| I32 staSignalToNoiseRatio | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 | Integer32 | read-only | SNR for the BSSID. |
| INT staTransmitRate | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.8 | INTEGER | read-only | Indicates Transmit rate of the channel |
| INT staReceiveRate | 1.3.6.1.4.1.14823.2.2.1.1.2.2.1.9 | INTEGER | read-only | Indicates Receive rate of the channel |
| wlsxSwitchStationStatsTable | 1.3.6.1.4.1.14823.2.2.1.1.2.3 | not-accessible | This Table lists the statistics of all the wireless stations associated with the Access points connected to this switch. | |
| wlsxSwitchStationStatsEntry | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1 | not-accessible | Station Statistics Entry | |
| C32 staTxPackets | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1 | Counter32 | read-only | Total Packets Transmitted by the station. |
| C32 staTxBytes | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2 | Counter32 | read-only | Total Bytes Transmitted by the station. |
| C32 staRxPackets | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3 | Counter32 | read-only | Total Packets Received by the Station |
| C32 staRxBytes | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4 | Counter32 | read-only | Total Bytes Received by the station. |
| I32 staBwRate | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5 | Integer32 | read-only | Bandwidth Rate in Kbps of the station. |
| I32 staFrameRetryRate | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6 | Integer32 | read-only | Station Frame Retry Rate. |
| I32 staFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.7 | Integer32 | read-only | Station Frame Low Speed Rate. |
| I32 staFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.8 | Integer32 | read-only | Station Frame Non Unicast Packet Rate. |
| I32 staFrameFragmentationRate | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.9 | Integer32 | read-only | Station Frame Fragmentation Rate. |
| I32 staFrameReceiveErrorRate | 1.3.6.1.4.1.14823.2.2.1.1.2.3.1.10 | Integer32 | read-only | Station Frame Receive Error Rate. |
| wlsxAccessPointInfoGroup | 1.3.6.1.4.1.14823.2.2.1.1.3 | |||
| U32 wlsxSwitchTotalNumAccessPoints | 1.3.6.1.4.1.14823.2.2.1.1.3.1 | Unsigned32 | read-only | Total Number of Access Points Connected to this switch. |
| U32 wlsxSwitchTotalNumStationsAssociated | 1.3.6.1.4.1.14823.2.2.1.1.3.2 | Unsigned32 | read-only | Total Number of Stations Associated to this switch. |
| wlsxSwitchAccessPointTable | 1.3.6.1.4.1.14823.2.2.1.1.3.3 | not-accessible | This Table lists all the Access Points Connected to this switch. | |
| wlsxSwitchAccessPointEntry | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1 | not-accessible | Station Management Entry | |
| MAC apBSSID | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.1 | MacAddress | not-accessible | The Physical Address of the Access Point. |
| STR apESSID | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.2 | DisplayString | read-only | ESSID of the Access Point |
| U32 apSlot | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.3 | Unsigned32 | read-only | Slot to which the Access Point is connected. |
| U32 apPort | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.4 | Unsigned32 | read-only | Port to which the Access Point is connected. |
| IP apIpAddress | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.5 | IpAddress | read-only | Address of the Access Point. |
| INT apPhyType | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6 | INTEGER | read-only | Physical Layer Protocol support of the AP. |
| INT apType | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7 | INTEGER | read-only | Indicates whether the Access point is an Air Monitor or regular AP. |
| INT apCurrentChannel | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8 | INTEGER | read-only | The Current Operating frequency channel. |
| STR apLocation | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9 | DisplayString | read-only | Location of the AP defined in Building.Floor.... mode. |
| TIK apTotalTime | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10 | TimeTicks | read-only | Time since the Ap is connected to the switch |
| TIK apInactiveTime | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.11 | TimeTicks | read-only | Time since the Ap has been inactive |
| T/F apLoadBalancing | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.12 | TruthValue | read-only | Indicates whether Load balancing is enabled or not. |
| I32 apChannelNoise | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.13 | Integer32 | read-only | Indicates the noise on the channel |
| I32 apSignalToNoiseRatio | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.14 | Integer32 | read-only | SNR for the BSSID. |
| INT apTransmitRate | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.15 | INTEGER | read-only | Indicates Transmit rate of the channel |
| INT apReceiveRate | 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.16 | INTEGER | read-only | Indicates Receive rate of the channel |
| wlsxSwitchGlobalAPTable | 1.3.6.1.4.1.14823.2.2.1.1.3.4 | not-accessible | This Table lists all the Access Points Connected in the Switch Domain. This table is valid only on a Master switch. On a Local switch, the table is empty. | |
| wlsxSwitchGlobalAPEntry | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1 | not-accessible | Station Management Entry | |
| STR globalAPLocation | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 | DisplayString | not-accessible | Physical Location of the AP, defined in Building.Floor.Location format. |
| IP globalAPAddress | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 | IpAddress | not-accessible | Address of the Access Point. |
| IP globalAPLocalSwitch | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 | IpAddress | read-only | IP Address of the Local Switch this Access Point is connected to. |
| MAC globalAPdot11aPhyAddr | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 | MacAddress | read-only | Physical Mac address of the module supporting dot11a in the Access Point. AP can have support for both dot11a and dot11b physical layer. |
| MAC globalAPdot11bPhyAddr | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5 | MacAddress | read-only | Physical Mac address of the module supporting dot11b in the Access Point. AP can have support for both dot11a and dot11b physical layer. |
| INT globalAPState | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 | INTEGER | read-only | State of the AP. 1 -- AP is UP. 2 -- AP is DOWN. 3-7 -- Values are deprecated. |
| MAC globalAPdot11gPhyAddr | 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7 | MacAddress | read-only | Physical Mac address of the module supporting dot11g in the Access Point. AP can have support for both a,b,g physical layer. |
| wlsxSwitchAccessPointStatsTable | 1.3.6.1.4.1.14823.2.2.1.1.3.5 | not-accessible | This Table lists the statistics of all the Access Points Connected to this switch. | |
| wlsxSwitchAccessPointStatsEntry | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1 | not-accessible | Ap Stats Entry. | |
| INT apStatsChannel | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.1 | INTEGER | read-only | Channel on which the ap is operating. |
| I32 apChannelBwRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2 | Integer32 | read-only | Bandwidth Rate in Kbps of the apChannel. |
| I32 apChannelFrameRetryRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.3 | Integer32 | read-only | Ap Channel Frame Retry Rate. |
| I32 apChannelFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.4 | Integer32 | read-only | Ap Channel Frame Low Speed Rate. |
| I32 apChannelFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.5 | Integer32 | read-only | Ap Channel Frame Non Unicast Packet Rate. |
| I32 apChannelFrameFragmentationRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.6 | Integer32 | read-only | Ap Channel Frame Fragmentation Rate. |
| I32 apChannelFrameReceiveErrorRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 | Integer32 | read-only | Ap Channel Frame Receive Error Rate. |
| C32 apBSSTxPackets | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.8 | Counter32 | read-only | Total Packets Transmitted by the ap on this BSSID. |
| C32 apBSSTxBytes | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9 | Counter32 | read-only | Total Bytes Transmitted by the ap on this BSSID. |
| C32 apBSSRxPackets | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10 | Counter32 | read-only | Total Packets Received by the ap on this BSSID |
| C32 apBSSRxBytes | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11 | Counter32 | read-only | Total Bytes Received by the ap on this BSSID. |
| I32 apBSSBwRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12 | Integer32 | read-only | Bandwidth Rate in Kbps of the ap on this BSSID. |
| I32 apBSSFrameRetryRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.13 | Integer32 | read-only | Frame Retry Rate on this BSSID. |
| I32 apBSSFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.14 | Integer32 | read-only | Frame Low Speed Rate on this BSSID. |
| I32 apBSSFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.15 | Integer32 | read-only | Frame Non Unicast Packet Rate on this BSSID. |
| I32 apBSSFrameFragmentationRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.16 | Integer32 | read-only | Frame Fragmentation Rate on this BSSID. |
| I32 apBSSFrameReceiveErrorRate | 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.17 | Integer32 | read-only | Frame Receive Error Rate on this BSSID. |
| wlsxSwitchTraps | 1.3.6.1.4.1.14823.2.2.1.1.100 | |||
| wlsxSwitchTrapObjectsGroup | 1.3.6.1.4.1.14823.2.2.1.1.100.100 | |||
| STR wlsxAuthServerName | 1.3.6.1.4.1.14823.2.2.1.1.100.100.1 | DisplayString | read-only | This Object is used in the traps to indicate the Authentication Server, used for Authentication. |
| I32 wlsxAuthServerTimeout | 1.3.6.1.4.1.14823.2.2.1.1.100.100.2 | Integer32 | read-only | This Object is used in the traps to indicate the Authentication Server Timeout. |
| I32 wlsxFanNumber | 1.3.6.1.4.1.14823.2.2.1.1.100.100.4 | Integer32 | read-only | This Object is used in the traps to indicate a failing fan number. |
| I32 wlsxLineCardNumber | 1.3.6.1.4.1.14823.2.2.1.1.100.100.5 | Integer32 | read-only | This Object is used in the traps to indicate a Line Card in the switch. |
| STR wlsxVoltageType | 1.3.6.1.4.1.14823.2.2.1.1.100.100.6 | DisplayString | read-only | This Object is used in the traps to indicate the type of the voltage. |
| STR wlsxVoltageValue | 1.3.6.1.4.1.14823.2.2.1.1.100.100.7 | DisplayString | read-only | This Object is used in the traps to indicate the voltage value in Float. |
| STR wlsxTemperatureValue | 1.3.6.1.4.1.14823.2.2.1.1.100.100.8 | DisplayString | read-only | This Object is used in the traps to indicate Temperature Value. |
| STR wlsxProcessName | 1.3.6.1.4.1.14823.2.2.1.1.100.100.9 | DisplayString | read-only | This Object is used in the traps to indicate a process name. |
| MAC wlsxStationMacAddress | 1.3.6.1.4.1.14823.2.2.1.1.100.100.10 | MacAddress | read-only | The Physical Address of the Station. |
| INT wlsxStationBlackListReason | 1.3.6.1.4.1.14823.2.2.1.1.100.100.11 | INTEGER | read-only | The Reason for which a station is black listed. |
| IP wlsxSpoofedIpAddress | 1.3.6.1.4.1.14823.2.2.1.1.100.100.12 | IpAddress | read-only | This Object is used in a trap to identify a Spoofed IP Address. |
| MAC wlsxSpoofedOldPhyAddress | 1.3.6.1.4.1.14823.2.2.1.1.100.100.13 | MacAddress | read-only | This Object is used in a trap to identify a Old Mac Address. |
| MAC wlsxSpoofedNewPhyAddress | 1.3.6.1.4.1.14823.2.2.1.1.100.100.14 | MacAddress | read-only | This Object is used in a trap to identify a New Mac Address. |
| STR wlsxDBName | 1.3.6.1.4.1.14823.2.2.1.1.100.100.15 | DisplayString | read-only | This Object is used in a trap to identify name of the Database. |
| STR wlsxDBUserName | 1.3.6.1.4.1.14823.2.2.1.1.100.100.16 | DisplayString | read-only | This Object is used in a trap to identify name of the Database user. |
| IP wlsxDBIpAddress | 1.3.6.1.4.1.14823.2.2.1.1.100.100.17 | IpAddress | read-only | This Object is used in a trap to identify the IpAddress of the DB. |
| INT wlsxDBType | 1.3.6.1.4.1.14823.2.2.1.1.100.100.18 | INTEGER | read-only | This Object is used in a trap to identify the Port of the user. |
| I32 wlsxVrID | 1.3.6.1.4.1.14823.2.2.1.1.100.100.19 | Integer32 | read-only | This Object contains the Virtual Router Identifier. |
| IP wlsxVrMasterIp | 1.3.6.1.4.1.14823.2.2.1.1.100.100.20 | IpAddress | read-only | This Object contains the Master IP address. |
| INT wlsxVrrpOperState | 1.3.6.1.4.1.14823.2.2.1.1.100.100.21 | INTEGER | read-only | This Object represents the VRRP operational state. |
| I32 wlsxApTxPower | 1.3.6.1.4.1.14823.2.2.1.1.100.100.22 | Integer32 | read-only | This Object contains the value of the AP Transmit Power. |
| STR wlsxESIServerGrpName | 1.3.6.1.4.1.14823.2.2.1.1.100.100.23 | DisplayString | read-only | This Object represents the External Services Interface (ESI) Server Group name |
| STR wlsxESIServerName | 1.3.6.1.4.1.14823.2.2.1.1.100.100.24 | DisplayString | read-only | This Object represents the External Services Interface (ESI) Server name |
| IP wlsxESIServerIpaddress | 1.3.6.1.4.1.14823.2.2.1.1.100.100.25 | IpAddress | read-only | This Object represents the External Services Interface (ESI) Server IP Address |
| I32 wlsxLicenseDaysRemaining | 1.3.6.1.4.1.14823.2.2.1.1.100.100.26 | Integer32 | read-only | This Object represents number of the days remaining prior to a license expiry |
| I32 wlsxSlotNumber | 1.3.6.1.4.1.14823.2.2.1.1.100.100.27 | Integer32 | read-only | This Object is used in the traps to indicate a Line Card in the switch. This value matches the value of sysExtCardSlot. |
| NTF wlsxSwitchIPChanged | 1.3.6.1.4.1.14823.2.2.1.1.100.1001 | A trap which indicates that the switch IP address has changed. | ||
| NTF wlsxSwitchRoleChange | 1.3.6.1.4.1.14823.2.2.1.1.100.1002 | A trap which indicates that the role of the switch has changed in the Domain. | ||
| NTF wlsxUserEntryCreated | 1.3.6.1.4.1.14823.2.2.1.1.100.1003 | A trap which indicates that a New user is created. | ||
| NTF wlsxUserEntryDeleted | 1.3.6.1.4.1.14823.2.2.1.1.100.1004 | A trap which indicates that a user is deleted. | ||
| NTF wlsxUserEntryAuthenticated | 1.3.6.1.4.1.14823.2.2.1.1.100.1005 | A trap which indicates that a user is Authenticated. | ||
| NTF wlsxUserEntryDeAuthenticated | 1.3.6.1.4.1.14823.2.2.1.1.100.1006 | A trap which indicates that a user is Deauthenticated. | ||
| NTF wlsxUserAuthenticationFailed | 1.3.6.1.4.1.14823.2.2.1.1.100.1007 | A trap which indicates that a user authentication has failed. | ||
| NTF wlsxAuthServerReqTimedOut | 1.3.6.1.4.1.14823.2.2.1.1.100.1008 | A trap which indicates that the authentication server request timed out. | ||
| NTF wlsxAuthServerTimedOut | 1.3.6.1.4.1.14823.2.2.1.1.100.1009 | A trap which indicates that the authentication server timed out. | ||
| NTF wlsxAuthServerIsUp | 1.3.6.1.4.1.14823.2.2.1.1.100.1010 | A trap which indicates that the authentication server is up. | ||
| NTF wlsxAuthMaxUserEntries | 1.3.6.1.4.1.14823.2.2.1.1.100.1011 | A trap which indicates that the User Entries table is full and cannot add any more entries. | ||
| NTF wlsxAuthMaxAclEntries | 1.3.6.1.4.1.14823.2.2.1.1.100.1012 | A trap which indicates that the Acl Entries table is full and cannot add any more entries. | ||
| NTF wlsxAuthMaxBWContracts | 1.3.6.1.4.1.14823.2.2.1.1.100.1013 | A trap which indicates that the switch reached the maximum number of configurable Bandwidth contracts. | ||
| NTF wlsxPowerSupplyFailure | 1.3.6.1.4.1.14823.2.2.1.1.100.1014 | A trap which indicates that the power supply has failed. | ||
| NTF wlsxFanFailure | 1.3.6.1.4.1.14823.2.2.1.1.100.1015 | A trap which indicates that the fan has failed. | ||
| NTF wlsxOutOfRangeVoltage | 1.3.6.1.4.1.14823.2.2.1.1.100.1016 | A trap which indicates that the switch received out of range voltage. | ||
| NTF wlsxOutOfRangeTemperature | 1.3.6.1.4.1.14823.2.2.1.1.100.1017 | A trap which indicates that the Temperature is out of bounds. | ||
| NTF wlsxLCInserted | 1.3.6.1.4.1.14823.2.2.1.1.100.1018 | A trap which indicates that a Line card is inserted. | ||
| NTF wlsxSCInserted | 1.3.6.1.4.1.14823.2.2.1.1.100.1019 | A trap which indicates that a supervisory card is inserted. | ||
| NTF wlsxGBICInserted | 1.3.6.1.4.1.14823.2.2.1.1.100.1020 | A trap which indicates that a GBIC is inserted in a line card. | ||
| NTF wlsxProcessDied | 1.3.6.1.4.1.14823.2.2.1.1.100.1021 | A trap which indicates that a process has died. | ||
| NTF wlsxProcessExceedsMemoryLimits | 1.3.6.1.4.1.14823.2.2.1.1.100.1022 | A trap which indicates that a process is consuming large amounts of memory. | ||
| NTF wlsxLowOnFlashSpace | 1.3.6.1.4.1.14823.2.2.1.1.100.1023 | A trap which indicates that the switch is running low on flash space. | ||
| NTF wlsxLowMemory | 1.3.6.1.4.1.14823.2.2.1.1.100.1024 | A trap which indicates that the system free memory is low. | ||
| NTF wlsxFanTrayRemoved | 1.3.6.1.4.1.14823.2.2.1.1.100.1025 | A trap which indicates that the fan tray is removed. | ||
| NTF wlsxFanTrayInserted | 1.3.6.1.4.1.14823.2.2.1.1.100.1026 | A trap which indicates that the fan tray is removed. | ||
| NTF wlsxLCRemoved | 1.3.6.1.4.1.14823.2.2.1.1.100.1027 | A trap which indicates that a Line card is removed. | ||
| NTF wlsxSCRemoved | 1.3.6.1.4.1.14823.2.2.1.1.100.1028 | A trap which indicates that a supervisory card is removed. | ||
| NTF wlsxPowerSupplyMissing | 1.3.6.1.4.1.14823.2.2.1.1.100.1029 | A trap which indicates that the power supply is missing. | ||
| NTF wlsxAccessPointIsUp | 1.3.6.1.4.1.14823.2.2.1.1.100.1030 | A trap which indicates that an Access point at Location apLocation and Address apIpAddress is up. | ||
| NTF wlsxAccessPointIsDown | 1.3.6.1.4.1.14823.2.2.1.1.100.1031 | A trap which indicates that an Access point at Location apLocation and Address apIpAddress is down. | ||
| NTF wlsxCoverageHoleDetected | 1.3.6.1.4.1.14823.2.2.1.1.100.1032 | A trap which indicates that an Access point at Location apLocation and Address apIpAddress has detected a Coverage Hole. | ||
| NTF wlsxChannelChanged | 1.3.6.1.4.1.14823.2.2.1.1.100.1033 | A trap which indicates that an Access point at Location apLocation and Address apIpAddress has changed the channel to apCurrentChannel. | ||
| NTF wlsxStationAddedToBlackList | 1.3.6.1.4.1.14823.2.2.1.1.100.1034 | A trap which indicates that a station with address wlsxStationMacAddress is black listed for wlsxStationBlackListReason reason. | ||
| NTF wlsxStationRemovedFromBlackList | 1.3.6.1.4.1.14823.2.2.1.1.100.1035 | A trap which indicates that a station with address wlsxStationMacAddress is removed from black list. | ||
| NTF wlsxIpSpoofingDetected | 1.3.6.1.4.1.14823.2.2.1.1.100.1036 | A trap indicating that the switch detected IP Spoofing. | ||
| NTF wlsxDBCommunicationFailure | 1.3.6.1.4.1.14823.2.2.1.1.100.1037 | A trap to indicate that communication with Database failed. | ||
| NTF wlsxVrrpStateChange | 1.3.6.1.4.1.14823.2.2.1.1.100.1038 | A trap which indicates that VRRP State has changed on the switch. | ||
| NTF wlsxAPRadioAttributesChanged | 1.3.6.1.4.1.14823.2.2.1.1.100.1039 | A trap which indicates changes in the Radio attributes of an Access Point at location apLocation and address apIpAddress. Ap channel is apCurrentChannel, and Transmit power is apTxPower. | ||
| NTF wlsxESIServerUp | 1.3.6.1.4.1.14823.2.2.1.1.100.1040 | A trap which indicates that a ESI server in group with is up | ||
| NTF wlsxESIServerDown | 1.3.6.1.4.1.14823.2.2.1.1.100.1041 | A trap which indicates that a ESI server in group with is down | ||
| NTF wlsxLicenseExpiry | 1.3.6.1.4.1.14823.2.2.1.1.100.1042 | A trap which indicates that one or more licenses on the switch will expire in days |
RFC description
Management Information Base for Aruba wireless switches and access points. Provides objects for system-level information, user tracking, access point status, and trap definitions for WLAN devices.
Start monitoring Aruba wireless LAN controller/switch (fan/voltage/temperature and wireless-security-event status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.