All MIBs › WLSX-POE-MIB › wlsxPsePortStatus
wlsxPsePortStatus
Module: WLSX-POE-MIB
OID (symbolic): WLSX-POE-MIB::wlsxPsePortStatus
OID (numeric): 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the status of the port.
unknown(1) - indicates either a state of off with the reason being not known or the state is on. offAdmin(2) - indicates the port is administratively disabled. offPowerManagement(3) - indicates the port is off due to power management. offIllegalClass(4) - indicates the port is off because the PD is of illegal class. offDetectionProgress(5)- indicates the port is off because the PD detection is in progress. offHardwareError(6) - indicates the port is off because of hardware error. offNonStandardPd(7) - indicates the port is off because the PD is a non standard one.
What is wlsxPsePortStatus?
This value gives the specific reason a power-over-Ethernet port is in its current on/off state, distinguishing causes like offAdmin(2) for administrative disable, offPowerManagement(3) for power-budget throttling, offIllegalClass(4) for a PD with an unsupported power class, or offHardwareError(6) for a hardware fault. An admin uses this to diagnose exactly why a device isn't getting powered, rather than just knowing that it isn't. For example, a value of offPowerManagement(3) tells the admin the switch's total power budget is exhausted rather than that the port itself is faulty.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4 snmpwalk -v2c -c public <target> WLSX-POE-MIB::wlsxPsePortStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4.1 snmpget -v2c -c public <target> WLSX-POE-MIB::wlsxPsePortStatus.1
Start monitoring Aruba wireless LAN controllers and PoE switches (per-port PSE/PD power-delivery/budget status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WLSX-POE-MIB::wlsxPsePortStatus OID value, configure state conditions and alerts, and monitor any Aruba wireless LAN controllers and PoE switches (per-port PSE/PD power-delivery/budget status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14823 | aruba | AP80-PRIVATE-MIB |
| 1.3.6.1.4.1.14823.2 | arubaEnterpriseMibModules | AP80-PRIVATE-MIB |
| 1.3.6.1.4.1.14823.2.2 | switch | ARUBA-MIB |
| 1.3.6.1.4.1.14823.2.2.1 | wlsxEnterpriseMibModules | ARUBA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14823.2.2.1.18 | wlsxPoEMIB | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1 | wlsxPoEMIBObjects | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1 | wlsxPsePortTable | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1 | wlsxPsePortEntry | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.4 | wlsxPsePortStatus | WLSX-POE-MIB |