All MIBs › WLSX-WLAN-MIB
Organization: Aruba Wireless Networks
Last Updated: 2010-01-26
Category: Aruba Wireless Networking
Description: Manages Aruba wireless controller WLAN profile configuration, SSID settings, and per-network client statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is WLSX-WLAN-MIB?
WLSX-WLAN-MIB is a vendor-specific MIB module published by Aruba Networks (the WLSX branding traces to the original Wireless LAN Switch product line, now part of HPE Aruba) for managing its wireless LAN controllers. Administrators searching for the WLSX-WLAN-MIB MIB definition are usually trying to confirm which WMS objects their monitoring tool should poll before rolling out Aruba controller support at scale. It exposes objects related to the controller's Wireless Management System (WMS), including WLAN profile definitions, SSID configuration, and per-network client statistics. Administrators rely on it primarily to monitor the software-managed operational status of wireless services -- whether a WLAN profile or SSID is active, how many clients are currently associated on each network, and general wireless service health -- rather than physical hardware sensors. As a controller-focused MIB it commonly works alongside standard interface (IF-MIB) and system (SNMPv2-MIB) conventions for underlying physical/network interface data. It is typically deployed in enterprise Wi-Fi environments where a network management system polls Aruba mobility controllers to track wireless network availability and client load trends.
IPNetwork Monitor allows you to monitor SNMP objects defined in WLSX-WLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Aruba wireless LAN controller product line, entire range (WLAN profile/SSID/client-count status)
Monitoring Examples
No sample objects were provided for this module, but based on its description an administrator would typically poll the WLAN profile and per-SSID client-count data exposed by the WMS to see how many wireless clients are associated to each configured network at a given time. A sudden drop to zero associated clients on an SSID that normally carries steady traffic would indicate a radio, profile misconfiguration, or controller-side failure. Because the sample_objects list is empty for this MIB, this scenario is inferred from the module description rather than grounded in specific named objects.
What Can Be Monitored
- WLAN profile operational status
- SSID configuration state
- per-network client association counts
- wireless service status
This MIB depends on
Related MIBs
Imported Objects
From ARUBA-MIB
| wlsxEnterpriseMibModules | OBJECT-IDENTITY |
From ARUBA-TC
| ArubaAPStatus | |
| ArubaAccessPointMode | |
| ArubaActiveState | |
| ArubaAntennaSetting | |
| ArubaAuthenticationMethods | |
| ArubaEnableValue | |
| ArubaEncryptionMethods | |
| ArubaEnet1Mode | |
| ArubaFrameType | |
| ArubaHTExtChannel | |
| ArubaHTMode | |
| ArubaMeshRole | |
| ArubaMonitorMode | |
| ArubaPhyType | |
| ArubaRogueApType | |
| ArubaUnprovisionedStatus | |
| ArubaVlanValidRange | |
| ArubaVoipProtocolType |
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TEXTUAL-CONVENTION | |
| Unsigned32 | |
| snmpModules |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| PhysAddress | |
| RowStatus | |
| StorageType | |
| TAddress | |
| TDomain | |
| TestAndIncr | |
| TimeInterval | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using wlanAPNumAps OID:
Select an HPE Aruba Networking 7200 Series Mobility Controller (e.g., 7210, 7240, 7280) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wlanAPNumAps into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of access points currently in this AP group, managed by the wireless controller. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the AP count drops below the number you expect in that group, which would indicate one or more APs have gone offline. Click Finish to create the monitor; you can adjust any parameter later.
See also: wlanAPRadioTransmitPower, wlanAPRadioUtilization
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| STR wlanAPAltitude | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.30 | DisplayString | read-write | Altitude of the AP. Signed floating-point value. |
| MAC wlanAPBSSID | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.1 | MacAddress | not-accessible | The MAC address of the Access Point. |
| MAC wlanAPBssidAPMacAddress | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.13 | MacAddress | read-only | Indicates the Access Point to which this BSSID belongs. |
| INT wlanAPBssidChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.8 | INTEGER | read-only | The current operating channel. |
| STR wlanAPBssidHTChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.17 | DisplayString | read-only | A display string indicating the current channel. If wlanAPBssidHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or '-' respectively. |
| STR wlanAPBssidHTExtChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.16 | ArubaHTExtChannel | read-only | Indicates the offset of the 40MHz extension channel, if any. |
| ARU wlanAPBssidHTMode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.15 | ArubaHTMode | read-only | Indicates the HT mode of this BSSID, if any. |
| TIK wlanAPBssidInactiveTime | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.10 | TimeTicks | read-only | Time (in hundredths of seconds) since any activity took place on the BSSID. |
| T/F wlanAPBssidLoadBalancing | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.11 | TruthValue | read-only | Indicates whether load balancing is enabled or not. |
| INT wlanAPBssidMode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.7 | INTEGER | read-only | Indicates whether the Access point is an Air Monitor or regular AP or Mesh Portal or Mesh Point. |
| U32 wlanAPBssidModule | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.18 | Unsigned32 | read-only | Module to which the Access Point is connected. |
| U32 wlanAPBssidNumAssociatedStations | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.12 | Unsigned32 | read-only | Indicates the number of stations associated to this BSSID. |
| I32 wlanAPBssidPhyNumber | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.14 | Integer32 | read-only | Indicates the radio number to which this BSSID belongs. |
| ARU wlanAPBssidPhyType | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.5 | ArubaPhyType | read-only | Physical Layer Protocol support of the AP. |
| U32 wlanAPBssidPort | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.4 | Unsigned32 | read-only | Port to which the Access Point is connected. |
| ARU wlanAPBssidRogueType | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.6 | ArubaRogueApType | read-only | The type of the Rogue. |
| U32 wlanAPBssidSlot | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.3 | Unsigned32 | read-only | Slot to which the Access Point is connected. |
| TIK wlanAPBssidUpTime | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.9 | TimeTicks | read-only | Time (in hundredths of seconds) since the tunnel was created between the access point and controller |
| I32 wlanAPBuilding | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.15 | Integer32 | read-only | AP Building Number. |
| C32 wlanAPChACKFailureCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.29 | Counter32 | read-only | This counter shall increment when an ACK is not received when expected. |
| I32 wlanAPChannelErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.16 | Integer32 | read-only | The number of error packets as a percentage of the total packets received on the current channel. |
| INT wlanAPChannelNumber | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.1 | INTEGER | read-only | The channel the AP is currently using. |
| I32 wlanAPChannelThroughput | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.9 | Integer32 | read-only | The throughput achieved on this channel. |
| I32 wlanAPChBusyRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.18 | Integer32 | read-only | This attribute indicates the busy this channel is. |
| I32 wlanAPChCoverageIndex | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.10 | Integer32 | read-only | This attribute indicates the coverage provided by the AP on this channel. |
| C32 wlanAPChFailedCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.23 | Counter32 | read-only | This counter shall increment when an MSDU is not transmitted successfully due to the number of transmit attempts exceeding either the dot11ShortRetryLimit or dot11LongRetryLimit. |
| C32 wlanAPChFCSErrorCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.32 | Counter32 | read-only | This counter shall increment when an FCS error is detected in a received MPDU. |
| I32 wlanAPChFrameBandwidthRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.16 | Integer32 | read-only | The bandwidth of this channel in Kbps. |
| C32 wlanAPChFrameDuplicateCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.26 | Counter32 | read-only | This counter shall increment when a frame is received that the Sequence Control field indicates is a duplicate. |
| I32 wlanAPChFrameFragmentationRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.15 | Integer32 | read-only | The number of fragments as a percentage of the total packets transmitted on this channel |
| I32 wlanAPChFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.13 | Integer32 | read-only | The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received on this channel |
| I32 wlanAPChFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.14 | Integer32 | read-only | The number of broadcast and multicast packets as a percentage of the total packets transmitted on this channel. |
| I32 wlanAPChFrameReceiveErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.20 | Integer32 | read-only | The number of error packets as a percentage of the total packets received on this channel. |
| I32 wlanAPChFrameRetryErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.17 | Integer32 | read-only | The number of error packets as a percentage of the total packets received on this channel. |
| I32 wlanAPChFrameRetryRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.12 | Integer32 | read-only | The number of retry packets as a percentage of the total packets transmitted and received on this channel. |
| I32 wlanAPChInterferenceIndex | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.11 | Integer32 | read-only | This attribute indicates the interference observed on this channel. |
| C32 wlanAPChMulticastReceivedFrameCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.31 | Counter32 | read-only | This counter shall increment when a MSDU is received with the multicast bit set in the destination MAC address. |
| C32 wlanAPChMulticastTransmittedFrameCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.22 | Counter32 | read-only | This counter shall increment only when the multicast bit is set in the destination MAC address of a successfully transmitted MSDU. When operating as a STA in an ESS, where these frames are directed to the AP, this implies having received an acknowledgment to all associated MPDUs. |
| C32 wlanAPChMultipleRetryCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.25 | Counter32 | read-only | This counter shall increment when an MSDU is successfully transmitted after more than one retransmission. |
| I32 wlanAPChNoise | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.9 | Integer32 | read-only | This attribute indicates the noise observed on this channel. |
| I32 wlanAPChNumAPs | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.19 | Integer32 | read-only | This attribute indicates the number of Access Points observed on this channel. |
| I32 wlanAPChNumStations | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.2 | Integer32 | read-only | This attribute indicates the number of stations using this channel. |
| C32 wlanAPChReceivedFragmentCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.30 | Counter32 | read-only | This counter shall be incremented for each successfully received MPDU of type Data or Management. |
| C32 wlanAPChRetryCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.24 | Counter32 | read-only | This counter shall increment when an MSDU is successfully transmitted after one or more retransmissions. |
| C32 wlanAPChRTSFailureCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.28 | Counter32 | read-only | This counter shall increment when a CTS is not received in response to an RTS. |
| C32 wlanAPChRTSSuccessCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.27 | Counter32 | read-only | This counter shall increment when a CTS is received in response to an RTS. |
| INT wlanAPChRxUtilization | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.35 | INTEGER | read-only | This is the percentage of time spent by the radio in receiving packets. |
| C32 wlanAPChTotBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.4 | Counter32 | read-only | This attribute indicates the total Bytes observed on this channel. |
| C32 wlanAPChTotFragmentedPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.6 | Counter32 | read-only | This attribute indicates the total Fragmented Packets observed on this channel. |
| C32 wlanAPChTotMacErrPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.8 | Counter32 | read-only | This attribute indicates the total Mac errors packets observed on this channel. |
| C32 wlanAPChTotPhyErrPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.7 | Counter32 | read-only | This attribute indicates the total Physical Error Packets observed on this channel. |
| C32 wlanAPChTotPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.3 | Counter32 | read-only | This attribute indicates the total packets observed on this channel. |
| C32 wlanAPChTotRetryPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.5 | Counter32 | read-only | This attribute indicates the total Retry Packets observed on this channel. |
| C32 wlanAPChTransmittedFragmentCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.21 | Counter32 | read-only | This counter shall be incremented for an acknowledged MPDU with an individual address in the address 1 field or an MPDU with a multicast address in the address 1 field of type Data or Management. |
| C32 wlanAPChTransmittedFrameCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.33 | Counter32 | read-only | This counter shall increment for each successfully transmitted MSDU. |
| INT wlanAPChTxUtilization | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.36 | INTEGER | read-only | This is the percentage of time spent by the radio in transmitting packets. |
| INT wlanAPChUtilization | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.37 | INTEGER | read-only | This is the percentage of time the channel is busy. |
| C32 wlanAPChWEPUndecryptableCount | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.34 | Counter32 | read-only | This counter shall increment when a frame is received with the Protected Frame subfield of the Frame Control field set to one and the WEPOn value for the key mapped to the transmitter's MAC address indicates that the frame should not have been encrypted or that frame is discarded due to the receiving STA not implementing the privacy option. |
| U32 wlanAPCurrentChannel | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 | Unsigned32 | read-only | The channel the AP is currently using. |
| I32 wlanAPdot11aAntennaGain | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 | Integer32 | read-only | Configured antenna gain for 'A' Radio. |
| I32 wlanAPdot11gAntennaGain | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 | Integer32 | read-only | Configured antenna gain for 'G' Radio. |
| ARU wlanAPEnet1Mode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10 | ArubaEnet1Mode | read-only | Enet1 Mode of the Access Point. |
| STR wlanAPESSID | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.2 | DisplayString | read-only | ESSID this BSSID is advertising. |
| ARU wlanAPExternalAntenna | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.18 | ArubaAntennaSetting | read-only | AP Antenna Status. |
| I32 wlanAPFloor | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.16 | Integer32 | read-only | AP Floor Number. |
| STR wlanAPFQLN | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.26 | DisplayString | read-write | The AP's Fully Qualified Location Name (FQLN). |
| STR wlanAPFQLNBuilding | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.24 | DisplayString | read-only | The building component of the AP's FQLN. |
| STR wlanAPFQLNCampus | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.27 | DisplayString | read-only | The campus component of the AP's FQLN. |
| STR wlanAPFQLNFloor | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.25 | DisplayString | read-only | The floor component of the AP's FQLN. |
| I32 wlanAPFrameBandwidthRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.14 | Integer32 | read-only | The bandwidth of this BSSID in Kbps. |
| I32 wlanAPFrameFragmentationRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.13 | Integer32 | read-only | The number of fragments as a percentage of the total packets transmitted by this BSSID. |
| I32 wlanAPFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.11 | Integer32 | read-only | The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this BSSID |
| I32 wlanAPFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.12 | Integer32 | read-only | The number of broadcast and multicast packets as a percentage of the total packets transmitted on this BSSIDchannel. |
| I32 wlanAPFrameReceiveErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.17 | Integer32 | read-only | The number of error packets as a percentage of the total packets received on this BSSID. |
| I32 wlanAPFrameRetryErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.15 | Integer32 | read-only | The number of error packets as a percentage of the total packets received on this BSSID. |
| I32 wlanAPFrameRetryRate | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.10 | Integer32 | read-only | The number of retry packets as a percentage of the total packets transmitted and received by this BSSID. |
| STR wlanAPGroup | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.1 | DisplayString | not-accessible | The name of an AP group |
| STR wlanAPGroupName | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.4 | DisplayString | read-write | Group Name of the Access Point. |
| IP wlanAPIpAddress | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.2 | IpAddress | read-only | IP Address of the Access Point |
| ARU wlanAPIpsecMode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.11 | ArubaEnableValue | read-only | IPSEC Mode of the Access Point. |
| STR wlanAPLatitude | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.29 | DisplayString | read-write | Latitude of the AP. Signed floating-point value. |
| I32 wlanAPLoc | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.17 | Integer32 | read-only | AP Location. |
| STR wlanAPLocation | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.14 | DisplayString | read-only | Location of the Access Point. |
| STR wlanAPLongitude | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.28 | DisplayString | read-write | Longitude of the AP. Signed floating-point value. |
| MAC wlanAPMacAddress | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.1 | MacAddress | not-accessible | Ethernet MAC Address of the Access Point |
| ARU wlanAPMeshRole | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.31 | ArubaMeshRole | read-write | AP Mesh role |
| OID wlanAPModel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 | OBJECT IDENTIFIER | read-only | Sys OID of the Access Point. |
| STR wlanAPModelName | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.13 | DisplayString | read-only | Model name of the Access Point. |
| ARU wlanAPMonitorMode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.23 | ArubaMonitorMode | read-only | Indicates whether any radio on this AP is acting as an air monitor. |
| STR wlanAPName | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.3 | DisplayString | read-write | Host name of the Access Point. |
| I32 wlanAPNumApsEx | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1.2 | Integer32 | read-only | The number of APs in the AP Group |
| I32 wlanAPNumBootstraps | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.20 | Integer32 | read-only | Number of times the AP has bootstrapped with the controller. |
| I32 wlanAPNumClients | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2 | Integer32 | read-only | The number of clients associated to this BSSID. |
| I32 wlanAPNumRadios | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 | Integer32 | read-only | Number of Radios in the Access Point. |
| I32 wlanAPNumReboots | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.21 | Integer32 | read-only | Number of times the AP has rebooted. |
| STR wlanAPRadioAPName | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.16 | DisplayString | read-write | Name of the AP the radio belongs to |
| STR wlanAPRadioBearing | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11 | DisplayString | read-write | Antenna Bearing in degrees from True North. Unsigned floating-point value. Range: 0-360. |
| I32 wlanAPRadioChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.3 | Integer32 | read-only | The channel the radio is currently operating on. |
| STR wlanAPRadioHTChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.15 | DisplayString | read-write | A display string indicating the current channel. If wlanAPRadioHTExtChannel is set to 'above' or 'below', then the channel number will be appended with '+' or '-' respectively. |
| STR wlanAPRadioHTExtChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14 | ArubaHTExtChannel | read-only | Indicates the offset of the 40MHz extension channel, if any. |
| ARU wlanAPRadioHTMode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13 | ArubaHTMode | read-only | The HT mode of the radio, if any. |
| NUM wlanAPRadioMode | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.5 | ArubaAccessPointMode | read-only | The Mode in which the radio is operating. |
| I32 wlanAPRadioNumActiveBSSIDs | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.9 | Integer32 | read-only | The number of active BSSIDs on this Radio. |
| I32 wlanAPRadioNumAssociatedClients | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.7 | Integer32 | read-only | The number of Clients associated to this radio. |
| I32 wlanAPRadioNumber | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.1 | Integer32 | not-accessible | The radio number |
| I32 wlanAPRadioNumMonitoredBSSIDs | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10 | Integer32 | read-only | The number of AP BSSIDs this radio is monitoring. |
| I32 wlanAPRadioNumMonitoredClients | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.8 | Integer32 | read-only | The number of Clients this Radio is monitoring. |
| STR wlanAPRadioTiltAngle | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12 | DisplayString | read-write | Tilt angle of antenna in degrees. -ve for downtilt, +ve for uptilt. Signed floating-point value. Range: -90 to +90. |
| I32 wlanAPRadioTransmitPowerEx | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.4 | Integer32 | read-only | The current power level of the radio. |
| ARU wlanAPRadioType | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.2 | ArubaPhyType | read-write | Type of the Radio |
| I32 wlanAPRadioUtilizationEx | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.6 | Integer32 | read-only | The Utilization of the radio as a percentage of the total capacity. |
| C32 wlanAPRxBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.6 | Counter32 | read-only | The number of bytes received on this BSSID. |
| C32 wlanAPRxDataBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.19 | Counter32 | read-only | The number of bytes received on this BSSID. |
| C64 wlanAPRxDataBytes64 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.23 | Counter64 | read-only | The number of bytes received on this BSSID. |
| C32 wlanAPRxDataPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.18 | Counter32 | read-only | The number of packets received on this BSSID. |
| C64 wlanAPRxDataPkts64 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.22 | Counter64 | read-only | The number of packets received on this BSSID. |
| C32 wlanAPRxDeauthentications | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.8 | Counter32 | read-only | The number of deauthentications received on this BSSID. |
| C32 wlanAPRxPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.5 | Counter32 | read-only | The number of packets received on this BSSID. |
| STR wlanAPSerialNumber | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 | DisplayString | read-only | Serial Number of the Access Point. |
| C32 wlanAPStatsPkts1024To1518 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.6 | Counter32 | read-only | This attribute indicates the total number of packets that were between 1024 and 1518 bytes long. |
| C32 wlanAPStatsPkts128To255 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.3 | Counter32 | read-only | This attribute indicates the total number of packets that were between 128 and 255 bytes long. |
| C32 wlanAPStatsPkts256To511 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.4 | Counter32 | read-only | This attribute indicates the total number of packets that were between 256 and 511 bytes long. |
| C32 wlanAPStatsPkts512To1023 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.5 | Counter32 | read-only | This attribute indicates the total number of packets that were between 512 and 1023 bytes long. |
| C32 wlanAPStatsPkts63Bytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1 | Counter32 | read-only | This attribute indicates the total number of packets that were less than 64 bytes long. |
| C32 wlanAPStatsPkts64To127 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2 | Counter32 | read-only | This attribute indicates the total number of packets that were between 64 and 127 bytes long. |
| C32 wlanAPStatsTotBytesAt11Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.8 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 11Mbps rate. |
| C32 wlanAPStatsTotBytesAt12Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.12 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 12Mbps rate. |
| C32 wlanAPStatsTotBytesAt18Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.14 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 18Mbps rate. |
| C32 wlanAPStatsTotBytesAt1Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.2 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 1Mbps rate. |
| C32 wlanAPStatsTotBytesAt24Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.16 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 24Mbps rate. |
| C32 wlanAPStatsTotBytesAt2Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.4 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 2Mbps rate. |
| C32 wlanAPStatsTotBytesAt36Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.18 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 36Mbps rate. |
| C32 wlanAPStatsTotBytesAt48Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.20 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 48Mbps rate. |
| C32 wlanAPStatsTotBytesAt54Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.22 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 54Mbps rate. |
| C32 wlanAPStatsTotBytesAt5Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.6 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 5Mbps rate. |
| C32 wlanAPStatsTotBytesAt6Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.10 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 6Mbps rate. |
| C32 wlanAPStatsTotBytesAt9Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.24 | Counter32 | read-only | This attribute indicates the total number of Bytes observed on this BSSID at 9Mbps rate. |
| C32 wlanAPStatsTotCtrlBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.4 | Counter32 | read-only | This attribute indicates the total number of Control Bytes observed on this BSSID. |
| C32 wlanAPStatsTotCtrlPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.3 | Counter32 | read-only | This attribute indicates the total number of Control packets observed on this BSSID. |
| C32 wlanAPStatsTotDABroadcastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.2 | Counter32 | read-only | This attribute indicates the total number of Broadcast Bytes observed on this BSSID. |
| C32 wlanAPStatsTotDABroadcastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.1 | Counter32 | read-only | This attribute indicates the total number of Broadcast packets observed on this BSSID. |
| C32 wlanAPStatsTotDAMulticastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.4 | Counter32 | read-only | This attribute indicates the total number of Multicast Bytes observed on this BSSID. |
| C32 wlanAPStatsTotDAMulticastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.3 | Counter32 | read-only | This attribute indicates the total number of Multicast packets observed on this BSSID. |
| C32 wlanAPStatsTotDataBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.6 | Counter32 | read-only | This attribute indicates the total number of Data Bytes observed on this BSSID. |
| C32 wlanAPStatsTotDataPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.5 | Counter32 | read-only | This attribute indicates the total number of Data packets observed on this BSSID. |
| C32 wlanAPStatsTotDAUnicastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.6 | Counter32 | read-only | This attribute indicates the total number of Unicast Bytes observed on this BSSID. |
| C32 wlanAPStatsTotDAUnicastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.5 | Counter32 | read-only | This attribute indicates the total number of Unicast packets observed on this BSSID. |
| C32 wlanAPStatsTotMgmtBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.2 | Counter32 | read-only | This attribute indicates the total number of Management Bytes observed on this BSSID. |
| C32 wlanAPStatsTotMgmtPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1.1 | Counter32 | read-only | This attribute indicates the total number of Management packets observed on this BSSID. |
| C32 wlanAPStatsTotPktsAt11Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.7 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 11Mbps rate. |
| C32 wlanAPStatsTotPktsAt12Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.11 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 12Mbps rate. |
| C32 wlanAPStatsTotPktsAt18Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.13 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 18Mbps rate. |
| C32 wlanAPStatsTotPktsAt1Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.1 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 1Mbps rate. |
| C32 wlanAPStatsTotPktsAt24Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.15 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 24Mbps rate. |
| C32 wlanAPStatsTotPktsAt2Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.3 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 2Mbps rate. |
| C32 wlanAPStatsTotPktsAt36Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.17 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 36Mbps rate. |
| C32 wlanAPStatsTotPktsAt48Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.19 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 48Mbps rate. |
| C32 wlanAPStatsTotPktsAt54Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.21 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 54Mbps rate. |
| C32 wlanAPStatsTotPktsAt5Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.5 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 5Mbps rate. |
| C32 wlanAPStatsTotPktsAt6Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.9 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 6Mbps rate. |
| C32 wlanAPStatsTotPktsAt9Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.23 | Counter32 | read-only | This attribute indicates the total number of packets observed on this BSSID at 9Mbps rate. |
| ARU wlanAPStatus | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.19 | ArubaAPStatus | read-only | AP Status. |
| STR wlanAPSysLocation | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.32 | DisplayString | read-only | AP sysLocation |
| C32 wlanAPTxBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.4 | Counter32 | read-only | The number of bytes transmitted on this BSSID. |
| C32 wlanAPTxDataBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.21 | Counter32 | read-only | The number of bytes transmitted on this BSSID. |
| C64 wlanAPTxDataBytes64 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.25 | Counter64 | read-only | The number of bytes transmitted on this BSSID. |
| C32 wlanAPTxDataPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.20 | Counter32 | read-only | The number of packets transmitted on this BSSID. |
| C64 wlanAPTxDataPkts64 | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.24 | Counter64 | read-only | The number of packets transmitted on this BSSID. |
| C32 wlanAPTxDeauthentications | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.7 | Counter32 | read-only | The number of deauthentications transmitted on this BSSID. |
| C32 wlanAPTxPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.3 | Counter32 | read-only | The number of packets transmitted on this BSSID. |
| ARU wlanAPUnprovisioned | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.22 | ArubaUnprovisionedStatus | read-only | Indicates whether the AP is unprovisioned due to lack of antenna gain or location code settings. |
| TIK wlanAPUpTime | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.12 | TimeTicks | read-only | Time (in hundredths of seconds) since the last time the Access Point bootstrapped with the controller. |
| STR wlanESSID | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.1 | DisplayString | not-accessible | The ESSID being advertised. |
| ARU wlanESSIDEncryptionType | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.5 | ArubaEncryptionMethods | read-only | The encryption methods supported on this ESSID. |
| U32 wlanESSIDNumAccessPointsDown | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.4 | Unsigned32 | read-only | The number of APs configured to advertise this ESSID that are not currently operational. |
| U32 wlanESSIDNumAccessPointsUp | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.3 | Unsigned32 | read-only | The number of APs currently advertising this ESSID. |
| U32 wlanESSIDNumStations | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.2 | Unsigned32 | read-only | The number of stations connected to this ESSID. |
| U32 wlanESSIDVlanId | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1 | Unsigned32 | not-accessible | VLAN which is part of the VLAN pool for this ESSID. |
| ROW wlanESSIDVlanPoolStatus | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2 | RowStatus | read-create | Row status object used to indicate the status of the row. |
| STR wlanStaAccessPointESSID | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.12 | DisplayString | read-only | ESSID of the Access point |
| MAC wlanStaApBssid | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.2 | MacAddress | not-accessible | The Access point to which this station last associated to. |
| STR wlanStaAssocFailureApEssid | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.2 | DisplayString | read-only | ESSID to which the station association failed. |
| STR wlanStaAssocFailureApName | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.1 | DisplayString | read-only | Name of the Access Point to which this station tried to associate. |
| TIK wlanStaAssocFailureElapsedTime | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.5 | TimeTicks | read-only | Elapsed time in timeticks after the station's failure to associate. |
| I32 wlanStaAssocFailurePhyNum | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.3 | Integer32 | read-only | Radio PHY number to which the station tried to associate. |
| ARU wlanStaAssocFailurePhyType | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.4 | ArubaPhyType | read-only | Radio PHY Type of the Station. |
| STR wlanStaAssocFailureReason | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1.6 | DisplayString | read-only | Reason for the Station association failure |
| U32 wlanStaAssociationID | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.11 | Unsigned32 | read-only | AID with which the Station is associated with this system. |
| INT wlanStaChannel | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.6 | INTEGER | read-only | Channel on which the station is associated. |
| U32 wlanStaChannelNum | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.1 | Unsigned32 | read-only | The channel the station is currently using. |
| C32 wlanStaCtrlPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.11 | Counter32 | read-only | The total number of Control packets transmitted by this station. |
| C32 wlanStaDataPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.10 | Counter32 | read-only | The total number of Data packets transmitted by this station. |
| I32 wlanStaFrameBandwidthRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.20 | Integer32 | read-only | The bandwidth of this station in Kbps. |
| I32 wlanStaFrameFragmentationRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.19 | Integer32 | read-only | The number of fragments as a percentage of the total packets transmitted by this station. |
| I32 wlanStaFrameLowSpeedRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.17 | Integer32 | read-only | The number of low data rate (<= 18Mbps for A/G bands and <=2Mbps for B band) packets as a percentage of the total packets transmitted and received by this station. |
| I32 wlanStaFrameNonUnicastRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.18 | Integer32 | read-only | The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. |
| I32 wlanStaFrameReceiveErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.22 | Integer32 | read-only | The number of error packets as a percentage of the total packets received by this station. |
| I32 wlanStaFrameRetryErrorRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.21 | Integer32 | read-only | The number of error packets as a percentage of the total packets received by this station. |
| I32 wlanStaFrameRetryRate | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.16 | Integer32 | read-only | The number of retry packets as a percentage of the total packets transmitted and received by this station. |
| ARU wlanStaHTMode | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.16 | ArubaHTMode | read-only | The HT status of the station. |
| T/F wlanStaIsAssociated | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.5 | TruthValue | read-only | Indicates whether the station is associated. |
| T/F wlanStaIsAuthenticated | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.4 | TruthValue | read-only | Indicates whether the station is authenticated. |
| C32 wlanStaNumAssocRequests | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.12 | Counter32 | read-only | The number of Association requests transmitted by this station. |
| C32 wlanStaNumAuthRequests | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.13 | Counter32 | read-only | The number of Authentication requests transmitted by this station. |
| MAC wlanStaPhyAddress | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.1 | MacAddress | not-accessible | The Physical Address of the Station. |
| I32 wlanStaPhyNumber | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.13 | Integer32 | read-only | Radio PHY number to which the station is associated |
| ARU wlanStaPhyType | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.3 | ArubaPhyType | read-only | Type of the Station. |
| I32 wlanStaRSSI | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.14 | Integer32 | read-only | Signal to Noise ratio for the station. |
| C32 wlanStaRxBCastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.7 | Counter32 | read-only | The number of broadcast bytes transmitted by this station. |
| C32 wlanStaRxBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.5 | Counter32 | read-only | The number of bytes received by this station. |
| C64 wlanStaRxBytes64 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.26 | Counter64 | read-only | The number of bytes received by this station, 64-bit value |
| C32 wlanStaRxBytesAt11Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.30 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 11Mbps rate. |
| C32 wlanStaRxBytesAt12Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.34 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 12Mbps rate. |
| C32 wlanStaRxBytesAt18Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.36 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 18Mbps rate. |
| C32 wlanStaRxBytesAt1Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.24 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 1Mbps rate. |
| C32 wlanStaRxBytesAt24Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.38 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 24Mbps rate. |
| C32 wlanStaRxBytesAt2Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.26 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 2Mbps rate. |
| C32 wlanStaRxBytesAt36Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.40 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 36Mbps rate. |
| C32 wlanStaRxBytesAt48Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.42 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 48Mbps rate. |
| C32 wlanStaRxBytesAt54Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.44 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 54Mbps rate. |
| C32 wlanStaRxBytesAt5Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.28 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 5Mbps rate. |
| C32 wlanStaRxBytesAt6Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.32 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 6Mbps rate. |
| C32 wlanStaRxBytesAt9Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.48 | Counter32 | read-only | This attribute indicates the number of Octets Received by the station at 9Mbps rate. |
| C32 wlanStaRxCtrlBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.10 | Counter32 | read-only | This attribute indicates the number of received Control Bytes at a station. |
| C32 wlanStaRxCtrlPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.9 | Counter32 | read-only | This attribute indicates the number of received Control packets at a station. |
| C32 wlanStaRxDataBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.12 | Counter32 | read-only | This attribute indicates the number of received Data Bytes at a station. |
| C32 wlanStaRxDataPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.11 | Counter32 | read-only | This attribute indicates the number of received Data packets at a station. |
| C32 wlanStaRxDeauthentications | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.15 | Counter32 | read-only | The number of Deauthentication frames received by this station. |
| C32 wlanStaRxMCastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.9 | Counter32 | read-only | The number of multicast bytes transmitted by this station. |
| C32 wlanStaRxMgmtBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.8 | Counter32 | read-only | This attribute indicates the number of received Management Bytes at a station. |
| C32 wlanStaRxMgmtPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.7 | Counter32 | read-only | This attribute indicates the number of received Management packets at a station. |
| C32 wlanStaRxPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.4 | Counter32 | read-only | The number of packets received by this station. |
| C32 wlanStaRxPkts1024To1518 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.12 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 1024 and 1518 bytes long. |
| C32 wlanStaRxPkts128To255 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.9 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 128 and 255 bytes long. |
| C32 wlanStaRxPkts256To511 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 256 and 511 bytes long. |
| C32 wlanStaRxPkts512To1023 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.11 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 512 and 1023 bytes long. |
| C32 wlanStaRxPkts63Bytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.7 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were less than 64 bytes long. |
| C32 wlanStaRxPkts64To127 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.8 | Counter32 | read-only | This attribute indicates the number of packets Received by the station that were between 64 and 127 bytes long. |
| C32 wlanStaRxPktsAt11Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.29 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 11Mbps rate. |
| C32 wlanStaRxPktsAt12Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.33 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 12Mbps rate. |
| C32 wlanStaRxPktsAt18Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.35 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 18Mbps rate. |
| C32 wlanStaRxPktsAt1Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.23 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 1Mbps rate. |
| C32 wlanStaRxPktsAt24Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.37 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 24Mbps rate. |
| C32 wlanStaRxPktsAt2Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.25 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 2Mbps rate. |
| C32 wlanStaRxPktsAt36Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.39 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 36Mbps rate. |
| C32 wlanStaRxPktsAt48Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.41 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 48Mbps rate. |
| C32 wlanStaRxPktsAt54Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.43 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 54Mbps rate. |
| C32 wlanStaRxPktsAt5Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.27 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 5Mbps rate. |
| C32 wlanStaRxPktsAt6Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.31 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 6Mbps rate. |
| C32 wlanStaRxPktsAt9Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.47 | Counter32 | read-only | This attribute indicates the number of Packets Received by the station at 9Mbps rate. |
| U32 wlanStaTransmitRate | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.10 | Unsigned32 | read-only | Transmit rate with which the Station is associated with this system. |
| C32 wlanStaTxBCastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.23 | Counter32 | read-only | The number of broadcast bytes transmitted by this station. |
| C32 wlanStaTxBCastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.6 | Counter32 | read-only | The number of broadcast packets transmitted by this station. |
| C32 wlanStaTxBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.3 | Counter32 | read-only | The number of bytes transmitted by this station. |
| C64 wlanStaTxBytes64 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.25 | Counter64 | read-only | The number of bytes transmitted by this station, 64-bit value |
| C32 wlanStaTxBytesAt11Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.8 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 11Mbps rate. |
| C32 wlanStaTxBytesAt12Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.12 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 12Mbps rate. |
| C32 wlanStaTxBytesAt18Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.14 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 18Mbps rate. |
| C32 wlanStaTxBytesAt1Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.2 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 1Mbps rate. |
| C32 wlanStaTxBytesAt24Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.16 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 24Mbps rate. |
| C32 wlanStaTxBytesAt2Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.4 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 2Mbps rate. |
| C32 wlanStaTxBytesAt36Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.18 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 36Mbps rate. |
| C32 wlanStaTxBytesAt48Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.20 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 48Mbps rate. |
| C32 wlanStaTxBytesAt54Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.22 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 54Mbps rate. |
| C32 wlanStaTxBytesAt5Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.6 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 5Mbps rate. |
| C32 wlanStaTxBytesAt6Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.10 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 6Mbps rate. |
| C32 wlanStaTxBytesAt9Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.46 | Counter32 | read-only | This attribute indicates the number of Octets Transmitted by the station at 9Mbps rate. |
| C32 wlanStaTxCtrlBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.4 | Counter32 | read-only | This attribute indicates the Transmitted Control Bytes from a station |
| C32 wlanStaTxCtrlPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.3 | Counter32 | read-only | This attribute indicates the Transmitted Control packets from a station |
| C32 wlanStaTxDABroadcastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.2 | Counter32 | read-only | This attribute indicates the number of Broadcast Bytes transmitted by this Station. |
| C32 wlanStaTxDABroadcastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.1 | Counter32 | read-only | This attribute indicates the number of Broadcast packets transmitted by this Station. |
| C32 wlanStaTxDAMulticastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.4 | Counter32 | read-only | This attribute indicates the number of Multicast Bytes transmitted by this station. |
| C32 wlanStaTxDAMulticastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.3 | Counter32 | read-only | This attribute indicates the number of Multicast packets transmitted by this station. |
| C32 wlanStaTxDataBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.6 | Counter32 | read-only | This attribute indicates the Transmitted Data Bytes observed on this channel. |
| C32 wlanStaTxDataPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.5 | Counter32 | read-only | This attribute indicates the Transmitted Data packets from a station |
| C32 wlanStaTxDAUnicastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.6 | Counter32 | read-only | This attribute indicates the total of Unicast Bytes transmitted by this station. |
| C32 wlanStaTxDAUnicastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1.5 | Counter32 | read-only | This attribute indicates the total of Unicast packets transmitted by this station. |
| C32 wlanStaTxDeauthentications | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.14 | Counter32 | read-only | The number of Deauthentication frames transmitted by this station. |
| C32 wlanStaTxMCastBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.24 | Counter32 | read-only | The number of multicast bytes transmitted by this station. |
| C32 wlanStaTxMCastPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.8 | Counter32 | read-only | The number of multicast packets transmitted by this station. |
| C32 wlanStaTxMgmtBytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.2 | Counter32 | read-only | This attribute indicates the Transmitted Management Bytes from a station |
| C32 wlanStaTxMgmtPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.1 | Counter32 | read-only | This attribute indicates the Transmitted Management packets from a station. |
| C32 wlanStaTxPkts | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.2 | Counter32 | read-only | The number of packets transmitted by this station. |
| C32 wlanStaTxPkts1024To1518 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.6 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. |
| C32 wlanStaTxPkts128To255 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.3 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 128 and 255 bytes long. |
| C32 wlanStaTxPkts256To511 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.4 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 256 and 511 bytes long. |
| C32 wlanStaTxPkts512To1023 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.5 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 512 and 1023 bytes long. |
| C32 wlanStaTxPkts63Bytes | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.1 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. |
| C32 wlanStaTxPkts64To127 | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.2 | Counter32 | read-only | This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long. |
| C32 wlanStaTxPktsAt11Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.7 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 11Mbps rate. |
| C32 wlanStaTxPktsAt12Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.11 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 12Mbps rate. |
| C32 wlanStaTxPktsAt18Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.13 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 18Mbps rate. |
| C32 wlanStaTxPktsAt1Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.1 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 1Mbps rate. |
| C32 wlanStaTxPktsAt24Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.15 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 24Mbps rate. |
| C32 wlanStaTxPktsAt2Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.3 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 2Mbps rate. |
| C32 wlanStaTxPktsAt36Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.17 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 36Mbps rate. |
| C32 wlanStaTxPktsAt48Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.19 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 48Mbps rate. |
| C32 wlanStaTxPktsAt54Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.21 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 54Mbps rate. |
| C32 wlanStaTxPktsAt5Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.5 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 5Mbps rate. |
| C32 wlanStaTxPktsAt6Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.9 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 6Mbps rate. |
| C32 wlanStaTxPktsAt9Mbps | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.45 | Counter32 | read-only | This attribute indicates the number of Packets Transmitted by the station at 9Mbps rate. |
| TIK wlanStaUpTime | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.15 | TimeTicks | read-only | Time since the station associated to the current BSSID. |
| ARU wlanStaVlanId | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.7 | ArubaVlanValidRange | read-only | VLAN in which the station is present. |
| ARU wlanStaVOIPProtocol | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.9 | ArubaVoipProtocolType | read-only | If VoIP is enabled, the type of the protocol supported. |
| T/F wlanStaVOIPState | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.8 | TruthValue | read-only | The State of VoIP for this station. |
| wlsxWlanAccessPointInfoGroup | 1.3.6.1.4.1.14823.2.2.1.5.2.1 | |||
| wlsxWlanAccessPointStatsGroup | 1.3.6.1.4.1.14823.2.2.1.5.3.1 | |||
| wlsxWlanAPBssidEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1 | not-accessible | BSSID Entry | |
| wlsxWlanAPBssidTable | 1.3.6.1.4.1.14823.2.2.1.5.2.1.7 | not-accessible | This table lists all the BSSIDs active on this controller. | |
| wlsxWlanAPChStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1 | not-accessible | Access Point Channel Stats entry | |
| wlsxWlanAPChStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.1.6 | not-accessible | This Table lists the Channel statistics of all the Access Points connected to the controller. | |
| wlsxWlanAPDATypeStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1 | not-accessible | Destination Address based packet and byte count entry for an AP | |
| wlsxWlanAPDATypeStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.1.3 | not-accessible | This table contains all the per BSSID Packet and Byte Counts but broken down in terms of Destination Address Type. | |
| wlsxWlanAPEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1 | not-accessible | Access Point Entry | |
| wlsxWlanAPFrameTypeStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.1 | not-accessible | Frame Type based packet and byte count entry for an AP | |
| wlsxWlanAPFrameTypeStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.1.4 | not-accessible | This table contains all the per BSSID Packet and Byte Counts but broken down into different Frame Types. | |
| wlsxWlanAPGroupEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3.1 | not-accessible | AP Group Entry | |
| wlsxWlanAPGroupTable | 1.3.6.1.4.1.14823.2.2.1.5.2.1.3 | not-accessible | This Table lists all the Access Points Groups configured in the Aruba controller. | |
| wlsxWlanAPPktSizeStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1 | not-accessible | Packet Size based packet count entry for a BSSID | |
| wlsxWlanAPPktSizeStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.1.5 | not-accessible | This table contains all the per BSSID Packet Count but broken down into different Packet Sizes. | |
| wlsxWlanAPRateStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1 | not-accessible | Data rate based packet and byte count entry for an AP | |
| wlsxWlanAPRateStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.1.2 | not-accessible | This table contains all the AP Packet and Byte Counts but represented in terms of rate categories. | |
| wlsxWlanAPStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 | not-accessible | Access Point Stats entry | |
| wlsxWlanAPStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.1.1 | not-accessible | This Table lists the statistics of all the Access Points connected to the controller. | |
| wlsxWlanAPTable | 1.3.6.1.4.1.14823.2.2.1.5.2.1.4 | not-accessible | This table lists all the Access Points connected to the controller. | |
| wlsxWlanAssociationInfoGroup | 1.3.6.1.4.1.14823.2.2.1.5.2.3 | |||
| wlsxWlanConfigGroup | 1.3.6.1.4.1.14823.2.2.1.5.1 | |||
| wlsxWlanESSIDEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1 | not-accessible | ESSID Entry | |
| wlsxWlanESSIDTable | 1.3.6.1.4.1.14823.2.2.1.5.2.1.8 | not-accessible | This Table lists all the ESSIDs advertised by this controller. | |
| wlsxWlanESSIDVlanPoolEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1 | not-accessible | ESSID Vlan Pool Entry | |
| wlsxWlanESSIDVlanPoolTable | 1.3.6.1.4.1.14823.2.2.1.5.2.1.9 | not-accessible | This Table lists all the VLANs associated with this ESSID. | |
| wlsxWlanMIB | 1.3.6.1.4.1.14823.2.2.1.5 | This MIB module defines MIB objects which provide information about the Wireless Management System (WMS) in the Aruba Controller. | ||
| wlsxWlanRadioEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1 | not-accessible | AP Radio Entry | |
| wlsxWlanRadioTable | 1.3.6.1.4.1.14823.2.2.1.5.2.1.5 | not-accessible | This table lists all the radios known to the controller. | |
| wlsxWlanStaAssociationFailureEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2.1 | not-accessible | Station Association Failure Entry | |
| wlsxWlanStaAssociationFailureTable | 1.3.6.1.4.1.14823.2.2.1.5.2.2.2 | not-accessible | This Table lists all the stations and the BSSID's to which they failed to associate. Once a station successfully associates, association failure entries are not reported for that station. | |
| wlsxWlanStaDATypeStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3.1 | not-accessible | Destination Address based packet and byte count entry for a station | |
| wlsxWlanStaDATypeStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.2.3 | not-accessible | This table contains all the Packet and Byte Counts for a station but but broken down in terms of Destination Address Type. | |
| wlsxWlanStaFrameTypeStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1 | not-accessible | Frame Type based packet and byte count entry for a station | |
| wlsxWlanStaFrameTypeStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.2.4 | not-accessible | This table contains all the Packet and Byte Counts for stations but broken down into different Frame Types. | |
| wlsxWlanStaPktSizeStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1 | not-accessible | Packet Size based packet count entry for a station | |
| wlsxWlanStaPktSizeStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.2.5 | not-accessible | This table contains all the Packet and Byte Counts for stations but broken down into different Packet Sizes. | |
| wlsxWlanStaRateStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1 | not-accessible | Data rate based packet and byte count entry for a station | |
| wlsxWlanStaRateStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.2.2 | not-accessible | This table contains all the Packet and Byte Counts for a station represented in terms of rate categories. | |
| wlsxWlanStateGroup | 1.3.6.1.4.1.14823.2.2.1.5.2 | |||
| wlsxWlanStationEntry | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1 | not-accessible | Station Entry | |
| wlsxWlanStationInfoGroup | 1.3.6.1.4.1.14823.2.2.1.5.2.2 | |||
| wlsxWlanStationStatsEntry | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1 | not-accessible | Station Stats Entry | |
| wlsxWlanStationStatsGroup | 1.3.6.1.4.1.14823.2.2.1.5.3.2 | |||
| wlsxWlanStationStatsTable | 1.3.6.1.4.1.14823.2.2.1.5.3.2.1 | not-accessible | This Table lists statistics of all the wireless stations associated with an AP connected to this controller. | |
| wlsxWlanStationTable | 1.3.6.1.4.1.14823.2.2.1.5.2.2.1 | not-accessible | This Table lists all the wireless stations associated with the Access points connected to this controller. | |
| wlsxWlanStatsGroup | 1.3.6.1.4.1.14823.2.2.1.5.3 | |||
| U32 wlsxWlanTotalNumAccessPoints | 1.3.6.1.4.1.14823.2.2.1.5.2.1.1 | Unsigned32 | read-only | Total Number of Access Points connected to the controller. |
| U32 wlsxWlanTotalNumStationsAssociated | 1.3.6.1.4.1.14823.2.2.1.5.2.1.2 | Unsigned32 | read-only | Total Number of Stations Associated to the controller. |
RFC description
Aruba WLAN MIB for managing wireless LAN access points, authentication, encryption, and mesh network configurations.
Start monitoring Aruba wireless LAN controller product line, entire range (WLAN profile/SSID/client-count status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.