All MIBs › WLSX-POE-MIB › wlsxPsePortDiscoveryMode
wlsxPsePortDiscoveryMode
Module: WLSX-POE-MIB
OID (symbolic): WLSX-POE-MIB::wlsxPsePortDiscoveryMode
OID (numeric): 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the method of discovery used by the system for the detection of the Powered Device(PD).
A value of unknown(0) means that the discovery method is unknown on this port.
A value of off(1) means that the discovery method is turned off on this port.
A value of ieee(2) indicates that the discovery method is IEEE based on this port.
A value of cisco(3) indicates that the discovery method is Cisco based on this port.
What is wlsxPsePortDiscoveryMode?
This value indicates which detection method the switch uses to discover a Powered Device on this port: off(1) means detection is disabled, ieee(2) means standard IEEE 802.3af detection, and cisco(3) means Cisco's proprietary pre-standard detection scheme. An admin sets or checks this when a non-IEEE-compliant legacy device (like an older Cisco phone) fails to get powered under standard detection. For example, switching this to cisco(3) may be needed to power a legacy Cisco IP phone that doesn't respond to IEEE discovery.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 snmpwalk -v2c -c public <target> WLSX-POE-MIB::wlsxPsePortDiscoveryMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5.1 snmpget -v2c -c public <target> WLSX-POE-MIB::wlsxPsePortDiscoveryMode.1
Start monitoring Aruba wireless LAN controllers and PoE switches (per-port PSE/PD power-delivery/budget status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WLSX-POE-MIB::wlsxPsePortDiscoveryMode OID value, configure state conditions and alerts, and monitor any Aruba wireless LAN controllers and PoE switches (per-port PSE/PD power-delivery/budget status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.14823 | aruba | AP80-PRIVATE-MIB |
| 1.3.6.1.4.1.14823.2 | arubaEnterpriseMibModules | AP80-PRIVATE-MIB |
| 1.3.6.1.4.1.14823.2.2 | switch | ARUBA-MIB |
| 1.3.6.1.4.1.14823.2.2.1 | wlsxEnterpriseMibModules | ARUBA-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.14823.2.2.1.18 | wlsxPoEMIB | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1 | wlsxPoEMIBObjects | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1 | wlsxPsePortTable | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1 | wlsxPsePortEntry | WLSX-POE-MIB |
| 1.3.6.1.4.1.14823.2.2.1.18.1.1.1.5 | wlsxPsePortDiscoveryMode | WLSX-POE-MIB |