VIDEOFRAME-SIGMON-VM0010-MIB

All MIBs › VIDEOFRAME-SIGMON-VM0010-MIB

Organization: Videoframe Systems

Last Updated: 2001-09-11

Category: Videoframe Broadcast Monitoring

Description: Monitors Videoframe VM0010 broadcast signal parameters and quality metrics in production environments.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VIDEOFRAME-SIGMON-VM0010-MIB?

This is a Videoframe Systems device-specific MIB for the VM0010 GPO (General Purpose Output) relay module, part of the broader VF-SIGMON broadcast signal-monitoring product family. It exposes module slot identity and active/locate status plus a table of GPO relay closures, including each relay's state, name, description, and interface assignment. For monitoring it reports hardware status directly: whether the module is active in its slot (vm0010Active), a physical locate/identify indicator (vm0010Locate), and the open/closed state of each GPO relay closure used to signal alarm conditions on the broadcast signal path. It explicitly augments MIB-2, VF-GENERIC, and VF-SIGMON, so it depends on those companion MIBs for base system identification and signal-monitoring context. It is deployed in broadcast production and master control room equipment racks where VM0010 GPO modules provide relay-based alarm/tally signaling, defined by the VIDEOFRAME-SIGMON-VM0010-MIB MIB.

IPNetwork Monitor allows you to monitor SNMP objects defined in VIDEOFRAME-SIGMON-VM0010-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Videoframe Systems VM0010 GPO relay module
broadcast/production signal monitoring equipment

Monitoring Examples

An operator would poll vm0010Table/vm0010Entry keyed by vm0010SlotNumber to confirm vm0010Active status for the module, then check vm0010GPORelayTable entries indexed by vm0010GPORelaySlotNumber and vm0010GPORelayNumber for vm0010GPOClosureState - a relay stuck closed or open on a named closure (vm0010GPOClosureName) would indicate a relay hardware fault or an unexpected alarm condition triggered on the broadcast signal path.

What Can Be Monitored

module active/slot status
module locate indicator
GPO relay closure state
GPO relay name/description
GPO interface assignment

Imported Objects

From RFC1155-SMI

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY

From SNMPv2-TC

DisplayString
RowStatus

From VIDEOFRAME-GENERIC-MIB

vfBoxId

OBJECT-TYPE

From VIDEOFRAME-REGISTRATIONS-MIB

vfMIBModules

OBJECT-IDENTITY

From VIDEOFRAME-SIGMON-MIB

vfFrameSlotNumber	OBJECT-TYPE
vfProductsVF200Reg	OBJECT-IDENTITY
vfSigmonFrameModuleTypes	OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using vm0010Active OID:

Select a Videoframe Systems VM0010 GPO relay module, broadcast/production signal monitoring equipment (relay open/closed status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vm0010Active into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates whether this entry is active (this module is in this slot). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'active', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
vm0010GPOInterface	1.3.6.1.4.1.4596.4.2.1.10
vm0010Table	1.3.6.1.4.1.4596.4.2.1.10.1		not-accessible	Each row contains information about one VM0010 GPI Interface module in the managed VF200 frame.
vm0010Entry	1.3.6.1.4.1.4596.4.2.1.10.1.1		not-accessible	A GPO Interface module entry.
INT vm0010SlotNumber	1.3.6.1.4.1.4596.4.2.1.10.1.1.1	INTEGER	read-only	The slot that this entry represents.
INT vm0010ActiveEx	1.3.6.1.4.1.4596.4.2.1.10.1.1.2	INTEGER	read-only	Indicates whether this entry is active (this module is in this slot).
INT vm0010Locate	1.3.6.1.4.1.4596.4.2.1.10.1.1.3	INTEGER	read-write	Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
vm0010GPORelayTable	1.3.6.1.4.1.4596.4.2.1.10.2		not-accessible	Each row contains information about one GPO relay of one VM0010 GPO Interface module in the managed VF200 frame.
vm0010GPORelayEntry	1.3.6.1.4.1.4596.4.2.1.10.2.1		not-accessible	A GPI Interface module GPI signal entry.
INT vm0010GPORelaySlotNumber	1.3.6.1.4.1.4596.4.2.1.10.2.1.1	INTEGER	read-only	The frame slot number that this entry represents.
INT vm0010GPORelayNumber	1.3.6.1.4.1.4596.4.2.1.10.2.1.2	INTEGER	read-only	The Relay number within the module.
INT vm0010GPOClosureState	1.3.6.1.4.1.4596.4.2.1.10.2.1.3	INTEGER	read-write	Controls and indicates the current state of this GPO closure.
STR vm0010GPOClosureName	1.3.6.1.4.1.4596.4.2.1.10.2.1.4	DisplayString	read-write	The name of this GPO closure.
STR vm0010GPOClosureDescription	1.3.6.1.4.1.4596.4.2.1.10.2.1.5	DisplayString	read-write	Descriptive identification of this GPO closure.
videoframeSigmonVm0010MIB	1.3.6.1.4.1.4596.6.1.8			This MIB describes the device specific objects of the VM0010 GPO Module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
vfProductsVM0010	1.3.6.1.4.1.4596.6.2.5.10			Videoframe VM0010 GPI (Input) Module.

RFC description

Videoframe Systems VM0010 GPI interface module MIB for monitoring and managing GPI (General Purpose Interface) modules in Videoframe VF200 frames.

Start monitoring Videoframe Systems VM0010 GPO relay module, broadcast/production signal monitoring equipment (relay open/closed status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VIDEOFRAME-SIGMON-VM0010-MIB