VIDEOFRAME-SIGMON-VM0001-MIB

All MIBs › VIDEOFRAME-SIGMON-VM0001-MIB

Organization: Videoframe Systems

Last Updated: 2001-08-30

Category: Videoframe Broadcast Monitoring

Description: Monitors Videoframe VM0001 module signal presence and alarm conditions in broadcast facilities.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VIDEOFRAME-SIGMON-VM0001-MIB?

VIDEOFRAME-SIGMON-VM0001-MIB is a Videoframe Systems proprietary MIB (built on VIDEOFRAME-GENERIC-MIB/VIDEOFRAME-SIGMON-MIB) for the VM0001 Analog Audio Monitoring module. Its module table, keyed by slot, records active flag, firmware revision, and a locate action; a signal table, keyed by slot/signal number, records name, description, current APL (Average Program Level) raw reading, zero-dB calibration set/value, and APL high/low threshold, duration, alarm state/acknowledge/trap-enable. As a performance/notification MIB it lets an administrator watch audio-signal level and get alerted on APL threshold breaches on a Videoframe VM0001 module. It is deployed on Videoframe Systems VM0001 Analog Audio Monitoring modules. Engineers can download the VIDEOFRAME-SIGMON-VM0001-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VIDEOFRAME-SIGMON-VM0001-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Videoframe Systems VM0001 Analog Audio Monitoring modules

Monitoring Examples

An administrator checks vm0001CurrentAplRaw and vm0001AplLowAlarmState to catch a dropped audio signal on a Videoframe VM0001 module.

What Can Be Monitored

analog audio signal level and threshold alarms

Imported Objects

From RFC1155-SMI

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY

From SNMPv2-TC

DisplayString
RowStatus

From VIDEOFRAME-GENERIC-MIB

vfBoxId

OBJECT-TYPE

From VIDEOFRAME-REGISTRATIONS-MIB

vfMIBModules

OBJECT-IDENTITY

From VIDEOFRAME-SIGMON-MIB

vfFrameSlotNumber	OBJECT-TYPE
vfProductsVF200Reg	OBJECT-IDENTITY
vfSigmonFrameModuleTypes	OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using vm0001Active OID:

Select a Videoframe Systems VM0001 Analog Audio Monitoring module (APL level/threshold-alarm status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vm0001Active into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates whether this entry is active (this module is in this slot). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'active', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
vm0001AnalogAudio	1.3.6.1.4.1.4596.4.2.1.1
vm0001Table	1.3.6.1.4.1.4596.4.2.1.1.1		not-accessible	Each row contains information about one VM0001 Analog Audio module in the managed VF200 frame.
vm0001Entry	1.3.6.1.4.1.4596.4.2.1.1.1.1		not-accessible	An Analog Audio module entry.
INT vm0001SlotNumber	1.3.6.1.4.1.4596.4.2.1.1.1.1.1	INTEGER	read-only	The slot that this entry represents.
INT vm0001ActiveEx	1.3.6.1.4.1.4596.4.2.1.1.1.1.2	INTEGER	read-only	Indicates whether this entry is active (this module is in this slot).
STR vm0001FirmwareRev	1.3.6.1.4.1.4596.4.2.1.1.1.1.3	DisplayString	read-only	The revision level of the firmware on this module.
INT vm0001Locate	1.3.6.1.4.1.4596.4.2.1.1.1.1.4	INTEGER	read-write	Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
vm0001SignalTable	1.3.6.1.4.1.4596.4.2.1.1.2		not-accessible	Each row contains information about one channel of one VM0001 Analog Audio module in the managed VF200 frame.
vm0001SignalEntry	1.3.6.1.4.1.4596.4.2.1.1.2.1		not-accessible	An Analog Audio module channel entry.
INT vm0001SignalSlotNumber	1.3.6.1.4.1.4596.4.2.1.1.2.1.1	INTEGER	read-only	The frame slot number that this entry represents.
INT vm0001SignalNumber	1.3.6.1.4.1.4596.4.2.1.1.2.1.2	INTEGER	read-only	The channel within the module to which this signal is connected.
STR vm0001SignalName	1.3.6.1.4.1.4596.4.2.1.1.2.1.3	DisplayString	read-write	The name of the signal connected to this channel.
STR vm0001SignalDescription	1.3.6.1.4.1.4596.4.2.1.1.2.1.4	DisplayString	read-write	Descriptive identification of the signal connected to this channel.
INT vm0001CurrentAplRaw	1.3.6.1.4.1.4596.4.2.1.1.2.1.5	INTEGER	read-only	The current average amplitude value on this channel, in raw sample units.
INT vm0001ZerodBCalibrationSet	1.3.6.1.4.1.4596.4.2.1.1.2.1.6	INTEGER	read-write	Set to 'go' (2) to set the value of the 0 dB channel calibration to the current average amplitude value on this channel.
INT vm0001ZerodBCalibrationValue	1.3.6.1.4.1.4596.4.2.1.1.2.1.7	INTEGER	read-only	The current raw sample amplitude value used as the 0 dB reference on this channel.
INT vm0001AplHighThreshold	1.3.6.1.4.1.4596.4.2.1.1.2.1.8	INTEGER	read-write	The high APL alarm threshold for this channel, in dB.
INT vm0001AplHighDuration	1.3.6.1.4.1.4596.4.2.1.1.2.1.9	INTEGER	read-write	The high APL duration, in milliseconds, at which to alarm, for this channel.
INT vm0001AplHighAlarmState	1.3.6.1.4.1.4596.4.2.1.1.2.1.10	INTEGER	read-only	The current state of the high APL alarm for this channel.
INT vm0001AplHighAlarmAck	1.3.6.1.4.1.4596.4.2.1.1.2.1.11	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered high APL alarm for this channel.
INT vm0001AplHighTrapEnable	1.3.6.1.4.1.4596.4.2.1.1.2.1.12	INTEGER	read-write	Set to enabled (1) to enable the high APL alarm trap for this channel.
INT vm0001AplLowThreshold	1.3.6.1.4.1.4596.4.2.1.1.2.1.13	INTEGER	read-write	The low APL alarm threshold for this channel, in dB.
INT vm0001AplLowDuration	1.3.6.1.4.1.4596.4.2.1.1.2.1.14	INTEGER	read-write	The low APL duration, in milliseconds, at which to alarm, for this channel.
INT vm0001AplLowAlarmState	1.3.6.1.4.1.4596.4.2.1.1.2.1.15	INTEGER	read-only	The current state of the low APL alarm for this channel.
INT vm0001AplLowAlarmAck	1.3.6.1.4.1.4596.4.2.1.1.2.1.16	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered low APL alarm for this channel.
INT vm0001AplLowTrapEnable	1.3.6.1.4.1.4596.4.2.1.1.2.1.17	INTEGER	read-write	Set to enabled (1) to enable the low APL alarm trap for this channel.
INT vm0001PeakThreshold	1.3.6.1.4.1.4596.4.2.1.1.2.1.18	INTEGER	read-write	The peak level above which to alarm.
INT vm0001PeakPeriod	1.3.6.1.4.1.4596.4.2.1.1.2.1.19	INTEGER	read-write	The period, in milliseconds, over which the peak value is accumulated for this channel.
INT vm0001PeakAlarmState	1.3.6.1.4.1.4596.4.2.1.1.2.1.20	INTEGER	read-only	The current state of the peak-threshold-exceeded alarm for this channel.
INT vm0001PeakAlarmAck	1.3.6.1.4.1.4596.4.2.1.1.2.1.21	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered peak alarm for this channel.
INT vm0001PeakTrapEnable	1.3.6.1.4.1.4596.4.2.1.1.2.1.22	INTEGER	read-write	Set to enabled (1) to enable the peak alarm trap for this channel.
vm0001StereoPairTable	1.3.6.1.4.1.4596.4.2.1.1.3		not-accessible	Each row contains information about one stereo pair on one VM0001 Analog Audio module in the managed VF200 frame.
vm0001StereoPairEntry	1.3.6.1.4.1.4596.4.2.1.1.3.1		not-accessible	An Analog Audio module channel entry.
INT vm0001StereoPairSlotNumber	1.3.6.1.4.1.4596.4.2.1.1.3.1.1	INTEGER	read-only	The slot that this entry represents.
STR vm0001StereoPairNumber	1.3.6.1.4.1.4596.4.2.1.1.3.1.2	DisplayString	read-write	The channel within the module to which this signal is connected.
STR vm0001StereoPairName	1.3.6.1.4.1.4596.4.2.1.1.3.1.3	DisplayString	read-write	The name of the signal connected to this channel.
STR vm0001StereoPairDescription	1.3.6.1.4.1.4596.4.2.1.1.3.1.4	DisplayString	read-write	Descriptive identifier of the signal connected to this channel.
INT vm0001MonoFilter	1.3.6.1.4.1.4596.4.2.1.1.3.1.5	INTEGER	read-write	The filter type currently selected for the mono alarm for this stereo pair.
I32 vm0001MonoDuration	1.3.6.1.4.1.4596.4.2.1.1.3.1.6	Integer32	read-write	The mono duration, in milliseconds, at which to alarm, for this stereo pair.
INT vm0001MonoAlarmState	1.3.6.1.4.1.4596.4.2.1.1.3.1.7	INTEGER	read-write	The current state of the mono alarm for this stereo pair.
INT vm0001MonoAlarmAck	1.3.6.1.4.1.4596.4.2.1.1.3.1.8	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered mono alarm for this stereo pair.
INT vm0001MonoTrapEnable	1.3.6.1.4.1.4596.4.2.1.1.3.1.9	INTEGER	read-write	Set to enabled (1) to enable the high APL alarm trap for this stereo pair.
INT vm0001StereoOutOfPhaseFilter	1.3.6.1.4.1.4596.4.2.1.1.3.1.10	INTEGER	read-write	The filter type currently selected for the stereo out of phase alarm for this stereo pair.
I32 vm0001StereoOutOfPhaseDuration	1.3.6.1.4.1.4596.4.2.1.1.3.1.11	Integer32	read-write	The stereo out of phase duration, in milliseconds, at which to alarm, for this stereo pair.
INT vm0001StereoOutOfPhaseAlarmState	1.3.6.1.4.1.4596.4.2.1.1.3.1.12	INTEGER	read-only	The current state of the stereo out of phase alarm for this stereo pair.
INT vm0001StereoOutOfPhaseAlarmAck	1.3.6.1.4.1.4596.4.2.1.1.3.1.13	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered stereo out of phase alarm for this stereo pair.
vm0001AnalogAudioEvents	1.3.6.1.4.1.4596.4.2.1.1.4
vm0001AnalogAudioEventsV2	1.3.6.1.4.1.4596.4.2.1.1.4.0
NTF analogAudioAPLHighAlarm	1.3.6.1.4.1.4596.4.2.1.1.4.0.1			An Analog Audio APL high alarm was triggered.
NTF analogAudioAPLLowAlarm	1.3.6.1.4.1.4596.4.2.1.1.4.0.2			An Analog Audio APL low alarm was triggered.
NTF analogAudioPeakAlarm	1.3.6.1.4.1.4596.4.2.1.1.4.0.3			An Analog Audio peak threshold exceeded alarm was triggered.
NTF analogAudioMonoAlarm	1.3.6.1.4.1.4596.4.2.1.1.4.0.4			An Analog Audio mono alarm was triggered.
NTF analogAudioStereoOutOfPhaseAlarm	1.3.6.1.4.1.4596.4.2.1.1.4.0.5			An Analog Audio stereo out of phase alarm was triggered.
videoframeSigmonVm0001MIB	1.3.6.1.4.1.4596.6.1.4			This MIB describes the device specific objects of the VM0001 Analog Audio Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
vfProductsVM0001Reg	1.3.6.1.4.1.4596.6.2.5.1			Videoframe VM0001 Analog Audio Monitoring Module.

RFC description

Monitors analog audio signal presence and firmware status for Videoframe VM0001 signal monitoring modules.

Start monitoring Videoframe Systems VM0001 Analog Audio Monitoring modules (APL level/threshold-alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VIDEOFRAME-SIGMON-VM0001-MIB