VIDEOFRAME-SIGMON-VM0007-MIB

All MIBs › VIDEOFRAME-SIGMON-VM0007-MIB

Organization: Videoframe Systems

Last Updated: 2001-08-30

Category: Videoframe Broadcast Monitoring

Description: Monitors Videoframe VM0007 signal monitoring module alarms and measurements in video facilities.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VIDEOFRAME-SIGMON-VM0007-MIB?

VIDEOFRAME-SIGMON-VM0007-MIB is a Videoframe Systems proprietary MIB for the VM0007 Transfer Switch module, extending the vendor's VF-GENERIC/VF-SIGMON MIBs with device-specific broadcast signal-switching detail. Its table records per-slot active/locate status, video-signal switch state, transfer-switch alarm acknowledgment, CPU-override flag, and named source/destination video feeds (names and descriptions for two sources and two destinations), alongside a companion audio-channel table with the same source-naming pattern. As a hardware-status/configuration MIB it lets a broadcast engineer confirm which video/audio source is currently switched to air on a given transfer-switch slot. It is deployed on the Videoframe Systems VM0007 Transfer Switch module. Engineers can download the VIDEOFRAME-SIGMON-VM0007-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VIDEOFRAME-SIGMON-VM0007-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Videoframe Systems VM0007 Transfer Switch module

Monitoring Examples

A broadcast engineer checks vm0007VideoSignalSwitchState to confirm the transfer switch has correctly failed over to the backup video source after the primary feed was lost.

What Can Be Monitored

active video/audio source switch state

Imported Objects

From RFC1155-SMI

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY

From SNMPv2-TC

DisplayString
RowStatus

From VIDEOFRAME-GENERIC-MIB

vfBoxId

OBJECT-TYPE

From VIDEOFRAME-REGISTRATIONS-MIB

vfMIBModules

OBJECT-IDENTITY

From VIDEOFRAME-SIGMON-MIB

vfFrameSlotNumber	OBJECT-TYPE
vfProductsVF200Reg	OBJECT-IDENTITY
vfSigmonFrameModuleTypes	OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using vm0007Active OID:

Select a Videoframe Systems VM0007 Transfer Switch module (video/audio source-switch status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vm0007Active into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates whether this entry is active (this module is in this slot). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'active', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
vm0007TransferSwitch	1.3.6.1.4.1.4596.4.2.1.7
vm0007Table	1.3.6.1.4.1.4596.4.2.1.7.1		not-accessible	Each row contains information about one VM0007 A/V Transfer Switch module in the managed VF200 frame.
vm0007Entry	1.3.6.1.4.1.4596.4.2.1.7.1.1		not-accessible	A VM0007 A/V Transfer Switch module entry.
INT vm0007SlotNumber	1.3.6.1.4.1.4596.4.2.1.7.1.1.1	INTEGER	read-only	The slot that this entry represents.
INT vm0007ActiveEx	1.3.6.1.4.1.4596.4.2.1.7.1.1.2	INTEGER	read-only	Indicates whether this entry is active (this module is in this slot).
INT vm0007Locate	1.3.6.1.4.1.4596.4.2.1.7.1.1.3	INTEGER	read-write	Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
INT vm0007VideoSignalSwitchState	1.3.6.1.4.1.4596.4.2.1.7.1.1.4	INTEGER	read-write	Controls the the video signal switch on the module and indicates its current state.
INT vm0007TransferSwitchAlarmAck	1.3.6.1.4.1.4596.4.2.1.7.1.1.5	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered transfer switch alarm. This will acknowledge both the transferSwitchActivatedAlarm and the transferSwitchNormalAlarm. With Auto Re-Arm off, one of each alarm will be allowed between acknowledges.
INT vm0007CPUOverride	1.3.6.1.4.1.4596.4.2.1.7.1.1.6	INTEGER	read-write	Set to 'on' to ignore GPI inputs on the module back panel and put the switch completely under SNMP or network API control.
STR vm0007VideoSource1Name	1.3.6.1.4.1.4596.4.2.1.7.1.1.7	DisplayString	read-write	The name of the signal connected to the 'S1' video input.
STR vm0007VideoSource1Description	1.3.6.1.4.1.4596.4.2.1.7.1.1.8	DisplayString	read-write	Descriptive identification of the signal connected to the 'S1' video input.
STR vm0007VideoSource2Name	1.3.6.1.4.1.4596.4.2.1.7.1.1.9	DisplayString	read-write	The name of the signal connected to the 'S2' video input.
STR vm0007VideoSource2Description	1.3.6.1.4.1.4596.4.2.1.7.1.1.10	DisplayString	read-write	Descriptive identification of the signal connected to the 'S2' video input.
STR vm0007VideoDest1Name	1.3.6.1.4.1.4596.4.2.1.7.1.1.11	DisplayString	read-write	The name of the destination for the 'D1' video output.
STR vm0007VideoDest1Description	1.3.6.1.4.1.4596.4.2.1.7.1.1.12	DisplayString	read-write	Descriptive identification of the destination for the 'D1' video output.
STR vm0007VideoDest2Name	1.3.6.1.4.1.4596.4.2.1.7.1.1.13	DisplayString	read-write	The name of the destination for the 'D2' video output.
STR vm0007VideoDest2Description	1.3.6.1.4.1.4596.4.2.1.7.1.1.14	DisplayString	read-write	Descriptive identification of the destination for the 'D2' video output.
vm0007AudioChannelTable	1.3.6.1.4.1.4596.4.2.1.7.2		not-accessible	Each row contains information about one audio channel of one VM0007 A/V Transfer Switch module in the managed VF200 frame.
vm0007AudioChannelEntry	1.3.6.1.4.1.4596.4.2.1.7.2.1		not-accessible	An A/V Transfer Switch module audio channel entry.
INT vm0007AudioChannelSlotNumber	1.3.6.1.4.1.4596.4.2.1.7.2.1.1	INTEGER	read-only	The frame slot number that this entry represents.
INT vm0007AudioChannelNumber	1.3.6.1.4.1.4596.4.2.1.7.2.1.2	INTEGER	read-only	The channel within the module to which this signal is connected.
INT vm0007AudioChannelSwitchState	1.3.6.1.4.1.4596.4.2.1.7.2.1.3	INTEGER	read-write	Controls the audio signal switch for this channel and indicates its current state.
STR vm0007AudioChanSource1Name	1.3.6.1.4.1.4596.4.2.1.7.2.1.4	DisplayString	read-write	The name of the signal connected to S1-An for this channel.
STR vm0007AudioChanSource1Description	1.3.6.1.4.1.4596.4.2.1.7.2.1.5	DisplayString	read-write	Descriptive identification of the signal connected to S1-An for this channel.
STR vm0007AudioChanSource2Name	1.3.6.1.4.1.4596.4.2.1.7.2.1.6	DisplayString	read-write	The name of the signal connected to S2-An for this channel.
STR vm0007AudioChanSource2Description	1.3.6.1.4.1.4596.4.2.1.7.2.1.7	DisplayString	read-write	Descriptive identification of the signal connected to S2-An for this channel.
STR vm0007AudioChanDest1Name	1.3.6.1.4.1.4596.4.2.1.7.2.1.8	DisplayString	read-write	The name of the signal connected to D1-An for this channel.
STR vm0007AudioChanDest1Description	1.3.6.1.4.1.4596.4.2.1.7.2.1.9	DisplayString	read-write	Descriptive identification of the signal connected to D1-An for this channel.
STR vm0007AudioChanDest2Name	1.3.6.1.4.1.4596.4.2.1.7.2.1.10	DisplayString	read-write	The name of the signal connected to D1-An for this channel.
STR vm0007AudioChanDest2Description	1.3.6.1.4.1.4596.4.2.1.7.2.1.11	DisplayString	read-write	Descriptive identification of the signal connected to D1-An for this channel.
vm0007TransferSwitchEvents	1.3.6.1.4.1.4596.4.2.1.7.3
vm0007TransferSwitchEventsV2	1.3.6.1.4.1.4596.4.2.1.7.3.0
NTF transferSwitchActivatedAlarm	1.3.6.1.4.1.4596.4.2.1.7.3.0.1			An A/V Transfer Switch was switched to crossover (backup) mode.
NTF transferSwitchNormalAlarm	1.3.6.1.4.1.4596.4.2.1.7.3.0.2			An A/V Transfer Switch was switched to straight through (normal) mode.
videoframeSigmonVm0007MIB	1.3.6.1.4.1.4596.6.1.7			This MIB describes the device specific objects of the VM0007 Transfer Switch module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
vfProductsVM0007Reg	1.3.6.1.4.1.4596.6.2.5.7			Videoframe VM0007 A/V Transfer Switch Module.

RFC description

Monitors and controls video signal transfer switch status and source selection for VM0007 equipment.

Start monitoring Videoframe Systems VM0007 Transfer Switch module (video/audio source-switch status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VIDEOFRAME-SIGMON-VM0007-MIB