VIDEOFRAME-SIGMON-VM0002-MIB

All MIBs › VIDEOFRAME-SIGMON-VM0002-MIB

Organization: Videoframe Systems

Last Updated: 2001-08-30

Category: Videoframe Broadcast Monitoring

Description: Monitors Videoframe VM0002 audio/video signal quality and sync on broadcast monitoring frames.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VIDEOFRAME-SIGMON-VM0002-MIB?

VIDEOFRAME-SIGMON-VM0002-MIB covers the Videoframe Systems VM0002 Analog Video Monitoring module, a broadcast/production signal-monitoring device that plugs into a monitoring frame. It exposes module identification and status data (slot number, active state, firmware revision) plus per-input analog video signal presence, naming, and description across the module's monitored feeds. Its monitoring purpose is explicitly hardware- and software-status oriented: it reports whether each monitoring module is active, its firmware revision for software-version auditing, and per-signal presence/event traps to catch a lost or degraded video feed. It augments MIB-2, VF-GENERIC, and VF-SIGMON, so those base modules must be present for full identification of the managed device. It is deployed in broadcast/production facilities using Videoframe monitoring frames to watch analog video signal integrity across many input feeds. Engineers can download the VIDEOFRAME-SIGMON-VM0002-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VIDEOFRAME-SIGMON-VM0002-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Videoframe Systems VM0002 Analog Video Monitoring module
broadcast video monitoring frame/rack system

Monitoring Examples

An administrator would poll vm0002Table/vm0002Entry indexed by vm0002SlotNumber to check vm0002Active and vm0002FirmwareRev for each installed monitoring module in the frame. The vm0002SignalTable (vm0002SignalEntry, keyed by vm0002SignalSlotNumber and vm0002SignalNumber) exposes vm0002SignalName and vm0002SignalDescription for each monitored analog video input, letting an operator confirm which feeds are patched where. The vm0002AnalogVideoEvents/vm0002AnalogVideoEventsV2 traps would fire to alert on loss of sync or signal dropout on a given input, revealing a failed camera or feed.

What Can Be Monitored

module active/slot status
firmware revision
per-input signal presence
signal name/description
analog video signal loss events
module locate/identify state

Imported Objects

From RFC1155-SMI

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY

From SNMPv2-TC

DisplayString
RowStatus

From VIDEOFRAME-GENERIC-MIB

vfBoxId

OBJECT-TYPE

From VIDEOFRAME-REGISTRATIONS-MIB

vfMIBModules

OBJECT-IDENTITY

From VIDEOFRAME-SIGMON-MIB

vfFrameSlotNumber	OBJECT-TYPE
vfProductsVF200Reg	OBJECT-IDENTITY
vfSigmonFrameModuleTypes	OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using vm0002Active OID:

Select a Videoframe Systems VM0002 Analog Video Monitoring module, broadcast video monitoring frame/rack system (per-input signal-presence status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vm0002Active into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates whether this entry is active (this module is in this slot). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'active', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
vm0002AnalogVideo	1.3.6.1.4.1.4596.4.2.1.2
vm0002Table	1.3.6.1.4.1.4596.4.2.1.2.1		not-accessible	Each row contains information about one VM0002 Analog Video module in the managed VF200 frame.
vm0002Entry	1.3.6.1.4.1.4596.4.2.1.2.1.1		not-accessible	An Analog Video module entry.
INT vm0002SlotNumber	1.3.6.1.4.1.4596.4.2.1.2.1.1.1	INTEGER	read-only	The slot that this entry represents.
INT vm0002ActiveEx	1.3.6.1.4.1.4596.4.2.1.2.1.1.2	INTEGER	read-only	Indicates whether this entry is active (this module is in this slot).
STR vm0002FirmwareRev	1.3.6.1.4.1.4596.4.2.1.2.1.1.3	DisplayString	read-only	The revision level of the firmware on this module.
INT vm0002Locate	1.3.6.1.4.1.4596.4.2.1.2.1.1.4	INTEGER	read-write	Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
vm0002SignalTable	1.3.6.1.4.1.4596.4.2.1.2.2		not-accessible	Each row contains information about one channel of one VM0002 Analog Video module in the managed VF200 frame.
vm0002SignalEntry	1.3.6.1.4.1.4596.4.2.1.2.2.1		not-accessible	An Analog Video module channel entry.
INT vm0002SignalSlotNumber	1.3.6.1.4.1.4596.4.2.1.2.2.1.1	INTEGER	read-only	The frame slot number that this entry represents.
INT vm0002SignalNumber	1.3.6.1.4.1.4596.4.2.1.2.2.1.2	INTEGER	read-only	The channel within the module to which this signal is connected.
STR vm0002SignalName	1.3.6.1.4.1.4596.4.2.1.2.2.1.3	DisplayString	read-write	The name of the signal connected to this channel.
STR vm0002SignalDescription	1.3.6.1.4.1.4596.4.2.1.2.2.1.4	DisplayString	read-write	Descriptive identification of the signal connected to this channel.
INT vm0002VSyncLossThreshold	1.3.6.1.4.1.4596.4.2.1.2.2.1.5	INTEGER	read-write	Number of frames with VSync errors to tolerate within the VSyncLossPeriod before alarming for this channel.
INT vm0002VSyncLossPeriod	1.3.6.1.4.1.4596.4.2.1.2.2.1.6	INTEGER	read-write	The period, in milliseconds, over which vertical sync errors are accumulated for this channel.
INT vm0002VSyncLossAlarmState	1.3.6.1.4.1.4596.4.2.1.2.2.1.7	INTEGER	read-only	The current state of the vertical sync loss alarm for this channel.
INT vm0002VSyncLossAlarmAck	1.3.6.1.4.1.4596.4.2.1.2.2.1.8	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered vertical sync loss alarm for this channel.
INT vm0002VSyncLossTrapEnable	1.3.6.1.4.1.4596.4.2.1.2.2.1.9	INTEGER	read-write	Set to enabled (1) to enable the vertical sync loss alarm trap for this channel.
INT vm0002HSyncLossThreshold	1.3.6.1.4.1.4596.4.2.1.2.2.1.10	INTEGER	read-write	Number of frames with horizontal sync errors to tolerate within the HSyncLossPeriod before alarming for this channel.
INT vm0002HSyncLossPeriod	1.3.6.1.4.1.4596.4.2.1.2.2.1.11	INTEGER	read-write	The period, in milliseconds, over which horizontal sync loss errors are accumulated for this channel.
INT vm0002HSyncLossAlarmState	1.3.6.1.4.1.4596.4.2.1.2.2.1.12	INTEGER	read-only	The current state of the horizontal sync loss alarm for this channel.
INT vm0002HSyncLossAlarmAck	1.3.6.1.4.1.4596.4.2.1.2.2.1.13	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered horizontal sync loss alarm for this channel.
INT vm0002HSyncLossTrapEnable	1.3.6.1.4.1.4596.4.2.1.2.2.1.14	INTEGER	read-write	Set to enabled (1) to enable the horizontal sync loss alarm trap for this channel.
INT vm0002PedestalHighThreshold	1.3.6.1.4.1.4596.4.2.1.2.2.1.15	INTEGER	read-write	Pedestal level above which to alarm for this channel, in units of 1/10th IRE.
INT vm0002PedestalHighPeriod	1.3.6.1.4.1.4596.4.2.1.2.2.1.16	INTEGER	read-write	The period, in milliseconds, that the pedestal must remain above the threshold to alarm for this channel.
INT vm0002MeasuredPedestal	1.3.6.1.4.1.4596.4.2.1.2.2.1.17	INTEGER	read-write	The current measured pedestal level on this channel, in units of 1/10th IRE.
INT vm0002PedestalHighAlarmState	1.3.6.1.4.1.4596.4.2.1.2.2.1.18	INTEGER	read-only	The current state of the pedestal high alarm for this channel.
INT vm0002PedestalHighAlarmAck	1.3.6.1.4.1.4596.4.2.1.2.2.1.19	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered pedestal high alarm for this channel.
INT vm0002PedestalHighTrapEnable	1.3.6.1.4.1.4596.4.2.1.2.2.1.20	INTEGER	read-write	Set to enabled (1) to enable the pedestal high alarm trap for this channel.
INT vm0002CurrentAplRaw	1.3.6.1.4.1.4596.4.2.1.2.2.1.21	INTEGER	read-only	The current average luminance value on this channel, as a raw 10-bit sample value.
INT vm0002n100IRECalibrationSet	1.3.6.1.4.1.4596.4.2.1.2.2.1.22	INTEGER	read-write	Set to 'go' (2) to set the value of the 100 IRE channel calibration to the current average luminance value on this channel.
INT vm0002n100IRECalibrationValue	1.3.6.1.4.1.4596.4.2.1.2.2.1.23	INTEGER	read-only	The current raw luminance value used as the 100 IRE reference on this channel.
INT vm0002AplHighThreshold	1.3.6.1.4.1.4596.4.2.1.2.2.1.24	INTEGER	read-write	The high APL alarm threshold for this channel, in IRE.
INT vm0002AplHighDuration	1.3.6.1.4.1.4596.4.2.1.2.2.1.25	INTEGER	read-write	The high APL duration, in milliseconds, at which to alarm, for this channel.
INT vm0002AplHighAlarmState	1.3.6.1.4.1.4596.4.2.1.2.2.1.26	INTEGER	read-only	The current state of the high APL alarm for this channel.
INT vm0002AplHighAlarmAck	1.3.6.1.4.1.4596.4.2.1.2.2.1.27	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered high APL alarm for this channel.
INT vm0002AplHighTrapEnable	1.3.6.1.4.1.4596.4.2.1.2.2.1.28	INTEGER	read-write	Set to enabled (1) to enable the high APL alarm trap for this channel.
INT vm0002AplLowThreshold	1.3.6.1.4.1.4596.4.2.1.2.2.1.29	INTEGER	read-write	The low APL alarm threshold for this channel, in IRE.
INT vm0002AplLowDuration	1.3.6.1.4.1.4596.4.2.1.2.2.1.30	INTEGER	read-write	The low APL duration, in milliseconds, at which to alarm, for this channel.
INT vm0002AplLowAlarmState	1.3.6.1.4.1.4596.4.2.1.2.2.1.31	INTEGER	read-only	The current state of the low APL alarm for this channel.
INT vm0002AplLowAlarmAck	1.3.6.1.4.1.4596.4.2.1.2.2.1.32	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered low APL alarm for this channel.
INT vm0002AplLowTrapEnable	1.3.6.1.4.1.4596.4.2.1.2.2.1.33	INTEGER	read-write	Set to enabled (1) to enable the low APL alarm trap for this channel.
INT vm0002FrozenImageFilter	1.3.6.1.4.1.4596.4.2.1.2.2.1.34	INTEGER	read-write	The algorithm to use for the frozen image alarm for this channel.
INT vm0002MaxFrozenDuration	1.3.6.1.4.1.4596.4.2.1.2.2.1.35	INTEGER	read-write	The frozen image duration, in milliseconds, at which to alarm, for this channel.
INT vm0002FrozenAlarmState	1.3.6.1.4.1.4596.4.2.1.2.2.1.36	INTEGER	read-only	The current state of the frozen image alarm for this channel.
INT vm0002FrozenAlarmAck	1.3.6.1.4.1.4596.4.2.1.2.2.1.37	INTEGER	read-write	Set to acknowledge (3) to acknowledge a triggered frozen image alarm for this channel.
INT vm0002FrozenTrapEnable	1.3.6.1.4.1.4596.4.2.1.2.2.1.38	INTEGER	read-write	Set to enabled (1) to enable the frozen image alarm trap for this channel.
INT vm0002BurstPresent	1.3.6.1.4.1.4596.4.2.1.2.2.1.39	INTEGER	read-write	Indicates whether color burst is present on this channel.
vm0002AnalogVideoEvents	1.3.6.1.4.1.4596.4.2.1.2.3
vm0002AnalogVideoEventsV2	1.3.6.1.4.1.4596.4.2.1.2.3.0
NTF analogVideoVSyncLossAlarm	1.3.6.1.4.1.4596.4.2.1.2.3.0.1			An Analog Video vertical sync loss alarm was triggered.
NTF analogVideoHSyncLossAlarm	1.3.6.1.4.1.4596.4.2.1.2.3.0.2			An Analog Video horizontal sync loss alarm was triggered.
NTF analogVideoPedestalHighAlarm	1.3.6.1.4.1.4596.4.2.1.2.3.0.3			An Analog Video pedestal high alarm was triggered.
NTF analogVideoAPLHighAlarm	1.3.6.1.4.1.4596.4.2.1.2.3.0.4			An Analog Video APL high alarm was triggered.
NTF analogVideoAPLLowAlarm	1.3.6.1.4.1.4596.4.2.1.2.3.0.5			An Analog Video APL low alarm was triggered.
NTF analogVideoFrozenImageAlarm	1.3.6.1.4.1.4596.4.2.1.2.3.0.6			An Analog Video frozen image alarm was triggered.
videoframeSigmonVm0002MIB	1.3.6.1.4.1.4596.6.1.5			This MIB describes the device specific objects of the VM0002 Analog Video Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
vfProductsVM0002Reg	1.3.6.1.4.1.4596.6.2.5.2			Videoframe VM0002 Analog Video Monitoring Module.

RFC description

Monitors analog video module functionality, signal status, firmware versions, and location identification.

Start monitoring Videoframe Systems VM0002 Analog Video Monitoring module, broadcast video monitoring frame/rack system (per-input signal-presence status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VIDEOFRAME-SIGMON-VM0002-MIB