All MIBs › VIDEOFRAME-SIGMON-VM0010-MIB › vm0010Locate
vm0010Locate
Module: VIDEOFRAME-SIGMON-VM0010-MIB
OID (symbolic): VIDEOFRAME-SIGMON-VM0010-MIB::vm0010Locate
OID (numeric): 1.3.6.1.4.1.4596.4.2.1.10.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing.
What is vm0010Locate?
This enumerated value controls and reports the state of the physical locate indicator LED on a VM0010 module: setting it to flash(1) makes the front-panel LED begin flashing, and off(2) stops it. An admin uses this to visually identify a specific module in a rack full of similar cards before performing physical maintenance. For example, an admin troubleshooting slot 5 remotely would set this to flash(1) so a technician on-site can immediately spot the correct card by its blinking LED.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4596.4.2.1.10.1.1.3 snmpwalk -v2c -c public <target> VIDEOFRAME-SIGMON-VM0010-MIB::vm0010Locate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4596.4.2.1.10.1.1.3.1 snmpget -v2c -c public <target> VIDEOFRAME-SIGMON-VM0010-MIB::vm0010Locate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4596.4.2.1.10.1.1.3.1 i <value>
Start monitoring Videoframe Systems VM0010 GPO relay module, broadcast/production signal monitoring equipment (relay open/closed status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the VIDEOFRAME-SIGMON-VM0010-MIB::vm0010Locate OID value, configure state conditions and alerts, and monitor any Videoframe Systems VM0010 GPO relay module, broadcast/production signal monitoring equipment (relay open/closed status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4596 | videoframe | VIDEOFRAME-REGISTRATIONS-MIB |
| 1.3.6.1.4.1.4596.4 | vfProducts | VIDEOFRAME-REGISTRATIONS-MIB |
| 1.3.6.1.4.1.4596.4.2 | vfSigmonFrame | VIDEOFRAME-SIGMON-MIB |
| 1.3.6.1.4.1.4596.4.2.1 | vfSigmonFrameModuleTypes | VIDEOFRAME-SIGMON-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4596.4.2.1.10 | vm0010GPOInterface | VIDEOFRAME-SIGMON-VM0010-MIB |
| 1.3.6.1.4.1.4596.4.2.1.10.1 | vm0010Table | VIDEOFRAME-SIGMON-VM0010-MIB |
| 1.3.6.1.4.1.4596.4.2.1.10.1.1 | vm0010Entry | VIDEOFRAME-SIGMON-VM0010-MIB |
| 1.3.6.1.4.1.4596.4.2.1.10.1.1.3 | vm0010Locate | VIDEOFRAME-SIGMON-VM0010-MIB |