UBQS-SNMP-MIB

All MIBs › UBQS-SNMP-MIB

Organization: Ubiquoss Corp.

Last Updated: 2011-03-28

Category: Ubiquoss Enterprise Networking

Description: Manages Ubiquoss SNMP agent configuration including community strings, trap targets, and access control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-SNMP-MIB?

UBQS-SNMP-MIB is a vendor-specific SNMP MIB module for Ubiquoss network switches, extending the standard SNMP notification framework used by carrier/ISP access equipment. It exposes configuration objects that control how the SNMP agent generates and delivers notifications, including trap destination handling, community-based access control, and the conformance groups/compliance statements the agent supports. Rather than presenting hardware sensor data itself, this MIB governs the alerting mechanism - determining whether and how a Ubiquoss device reports fault conditions such as link or hardware failures to a management station, so its role in monitoring is indirect but essential since it is the plumbing that carries hardware/software fault traps upstream. It mirrors and extends the structure of the standard SNMPv2-MIB/SNMP-NOTIFICATION-MIB conformance framework. It is typically deployed in ISP/carrier access networks where a centralized NMS needs reliable trap delivery from Ubiquoss access/aggregation switches. Engineers can download the UBQS-SNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss network switch (access/aggregation)

Monitoring Examples

The module defines ubiSnmpMIBObjects as the root for its configuration data, with ubiSnmpMIBGroups and ubiSnmpMIBCompliances nested under ubiSnmpMIBConformance describing which object groups and compliance levels the agent implements. Because the sample objects expose only top-level structural nodes (objects, conformance, compliances, groups, notification-prefix) rather than concrete leaf/table objects, this module appears to be primarily a conformance/structural framework layered over unseen configuration tables. An administrator would use the underlying trap-destination and community tables to point the device at an NMS receiver so hardware/link faults get reported as SNMP traps.

What Can Be Monitored

SNMP trap destination configuration
community string access control
notification object group compliance

Imported Objects

From IANAifType-MIB

IANAifType

From INET-ADDRESS-MIB

InetAddress
InetAddressPrefixLength
InetAddressType

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Integer32

From SNMPv2-TC

RowStatus

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiSnmpMIB	1.3.6.1.4.1.7800.100.19			This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of notifications.
ubiSnmpMIBNotificationPrefix	1.3.6.1.4.1.7800.100.19.0
ubiSnmpMIBObjects	1.3.6.1.4.1.7800.100.19.1
ubiSnmpCommunityTable	1.3.6.1.4.1.7800.100.19.1.1		not-accessible	This table contains objects which provide the information about the community configuration of SNMP.
ubiSnmpCommunityEntry	1.3.6.1.4.1.7800.100.19.1.1.1		not-accessible	An entry containing information about the SNMP community.
STR ubiSnmpCommunity	1.3.6.1.4.1.7800.100.19.1.1.1.1	DisplayString	read-only	A textual string containing information about the SNMP community.
INT ubiSnmpCommunityType	1.3.6.1.4.1.7800.100.19.1.1.1.2	INTEGER	read-write	The access type of SNMP community.
STR ubiSnmpCommunityAclName	1.3.6.1.4.1.7800.100.19.1.1.1.3	DisplayString	read-write	The access id for SNMP community.
STR ubiSnmpCommunityView	1.3.6.1.4.1.7800.100.19.1.1.1.4	DisplayString	read-write	The view string for SNMP community.
ROW ubiSnmpCommunityRowStatus	1.3.6.1.4.1.7800.100.19.1.1.1.5	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
ubiSnmpUserTable	1.3.6.1.4.1.7800.100.19.1.2		not-accessible	This table contains objects which provide the information about the user configuration of SNMP.
ubiSnmpUserEntry	1.3.6.1.4.1.7800.100.19.1.2.1		not-accessible	An entry containing information about the SNMP user.
SNM ubiSnmpUserVersion	1.3.6.1.4.1.7800.100.19.1.2.1.1	SnmpVersion	read-only	The version of SNMP user.
STR ubiSnmpUserName	1.3.6.1.4.1.7800.100.19.1.2.1.2	DisplayString	read-only	A textual string containing information about the SNMP user.
STR ubiSnmpUserGroup	1.3.6.1.4.1.7800.100.19.1.2.1.3	DisplayString	read-write	A textual string containing information about the group belong to SNMP user.
INT ubiSnmpUserAuthType	1.3.6.1.4.1.7800.100.19.1.2.1.4	INTEGER	read-write	This object indicates the authentication parameters for SNMPv3 user. SNMPv1 and SNMPv2c is always none(0). Because only SNMPv3 user can support the authentication and(or) Privacy.
STR ubiSnmpUserAuthPasswd	1.3.6.1.4.1.7800.100.19.1.2.1.5	DisplayString	read-write	A textual string containing authentication password for SNMPv3 user. SNMPv1 and SNMPv2c is always ''(null string). Because only SNMPv3 user can support the authentication and(or) Privacy.
INT ubiSnmpUserPrivacyType	1.3.6.1.4.1.7800.100.19.1.2.1.6	INTEGER	read-write	This object indicates the encryption parameters for SNMPv3 user. SNMPv1 and SNMPv2c is always none(0). Because only SNMPv3 user can support the authentication and(or) Privacy.
STR ubiSnmpUserPrivacyPasswd	1.3.6.1.4.1.7800.100.19.1.2.1.7	DisplayString	read-write	A textual string containing encryption password for SNMPv3 user. SNMPv1 and SNMPv2c is always ''(null string). Because only SNMPv3 user can support the authentication and(or) Privacy.
STR ubiSnmpUserAclName	1.3.6.1.4.1.7800.100.19.1.2.1.8	DisplayString	read-write	The access ID for SNMP user.
ROW ubiSnmpUserRowStatus	1.3.6.1.4.1.7800.100.19.1.2.1.9	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
ubiSnmpGroupTable	1.3.6.1.4.1.7800.100.19.1.3		not-accessible	This table contains objects which provide the information about the group configuration of SNMP.
ubiSnmpGroupEntry	1.3.6.1.4.1.7800.100.19.1.3.1		not-accessible	An entry containing information about the SNMP group.
SNM ubiSnmpGroupVersion	1.3.6.1.4.1.7800.100.19.1.3.1.1	SnmpVersion	read-only	The version of SNMP group.
STR ubiSnmpGroupName	1.3.6.1.4.1.7800.100.19.1.3.1.2	DisplayString	read-only	A textual string containing information about the SNMP group.
INT ubiSnmpGroupSecLevel	1.3.6.1.4.1.7800.100.19.1.3.1.3	INTEGER	read-write
STR ubiSnmpGroupReadView	1.3.6.1.4.1.7800.100.19.1.3.1.4	DisplayString	read-write
STR ubiSnmpGroupWriteView	1.3.6.1.4.1.7800.100.19.1.3.1.5	DisplayString	read-write
STR ubiSnmpGroupNotifyView	1.3.6.1.4.1.7800.100.19.1.3.1.6	DisplayString	read-write
ROW ubiSnmpGroupRowStatus	1.3.6.1.4.1.7800.100.19.1.3.1.7	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
ubiSnmpViewTable	1.3.6.1.4.1.7800.100.19.1.4		not-accessible	This table contains objects which provide the information about the group configuration of SNMP.
ubiSnmpViewEntry	1.3.6.1.4.1.7800.100.19.1.4.1		not-accessible	An entry containing information about the SNMP group.
STR ubiSnmpViewName	1.3.6.1.4.1.7800.100.19.1.4.1.1	DisplayString	read-only	A textual string containing information about the SNMP view.
STR ubiSnmpViewVariable	1.3.6.1.4.1.7800.100.19.1.4.1.2	DisplayString	read-only
INT ubiSnmpViewType	1.3.6.1.4.1.7800.100.19.1.4.1.3	INTEGER	read-write
ROW ubiSnmpViewRowStatus	1.3.6.1.4.1.7800.100.19.1.4.1.4	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
ubiSnmpTrapHostTable	1.3.6.1.4.1.7800.100.19.1.5		not-accessible	This table contains objects which provide the information about the trap host configuration of SNMP.
ubiSnmpTrapHostEntry	1.3.6.1.4.1.7800.100.19.1.5.1		not-accessible	An entry containing information about the SNMP trap host.
INT ubiSnmpTrapHostType	1.3.6.1.4.1.7800.100.19.1.5.1.1	INTEGER	read-only	This object indicates the trap type.
SNM ubiSnmpTrapHostVersion	1.3.6.1.4.1.7800.100.19.1.5.1.2	SnmpVersion	read-only	This object indicates the trap version. A system configuring the trap host can send a notification depending on trap version.
IPt ubiSnmpTrapHostAddrType	1.3.6.1.4.1.7800.100.19.1.5.1.3	InetAddressType	read-only	The type of the UbiSnmpTrapHostAddress, as defined in the InetAddress MIB. (e.g. ipv4, ipv6..)
IP ubiSnmpTrapHostAddress	1.3.6.1.4.1.7800.100.19.1.5.1.4	InetAddress	read-only	The trap host IP address. The type of this address is determined by the value of the ubiSnmpTrapHostAddrType object.
STR ubiSnmpTrapHostCommunity	1.3.6.1.4.1.7800.100.19.1.5.1.5	DisplayString	read-only	A textual string containing information about the community(or SNMPv3 user) for trap host configuration.
INT ubiSnmpTrapHostSecLevel	1.3.6.1.4.1.7800.100.19.1.5.1.6	INTEGER	read-write	The security type for SNMPv3 trap host.
I32 ubiSnmpTrapHostPort	1.3.6.1.4.1.7800.100.19.1.5.1.7	Integer32	read-write	The port number of SNMP trap host.
ROW ubiSnmpTrapHostRowStatus	1.3.6.1.4.1.7800.100.19.1.5.1.8	RowStatus	read-create	This object is used to create a new row or modify or delete an existing row in this table.
ubiSnmpMIBConformance	1.3.6.1.4.1.7800.100.19.2
ubiSnmpMIBCompliances	1.3.6.1.4.1.7800.100.19.2.1
ubiSnmpMIBCompliance	1.3.6.1.4.1.7800.100.19.2.1.1			The compliance statement for entities which implement the ubiquoss snmp configuration MIB.
ubiSnmpMIBGroups	1.3.6.1.4.1.7800.100.19.2.2
ubiSnmpConfigGroup	1.3.6.1.4.1.7800.100.19.2.2.1			A collection of objects containing information about IP adderss configuration.

RFC description

Ubiquoss SNMP management information base used for network monitoring and device management in LibreNMS and other monitoring systems, part of Ubiquoss's MIB collection for network infrastructure.

Start monitoring Ubiquoss network switch, access/aggregation (SNMP notification/trap-destination config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-SNMP-MIB

What Is UBQS-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description