UBQS-SYSTEM-MIB

All MIBs › UBQS-SYSTEM-MIB

Organization: Ubiquoss Corp.

Last Updated: 2010--1-2-

Category: Ubiquoss Enterprise Networking

Description: Manages Ubiquoss system-level configuration including device identity, NTP, and management settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-SYSTEM-MIB?

UBQS-SYSTEM-MIB is a Ubiquoss vendor MIB providing general system-level information and configuration for their network devices, functioning as the base identity/configuration MIB for the product line. It exposes data such as device identity, NTP/time-zone configuration, and pointers to redundancy state, serving as the general system-info counterpart to the more specialized environmental and redundancy MIBs. Its monitoring relevance includes confirming system identity and clock configuration and cross-referencing current redundancy role via ubiSysRedundancy, which is useful for verifying overall device software/configuration state during troubleshooting. It is closely related to UBQS-ENVMON-MIB and UBQS-REDUNDANCY-MIB within the same vendor MIB family, sharing the ubiSystemMIBObjects notification/conformance conventions. It is deployed across Ubiquoss switches, OLTs, and access appliances as the baseline system-management MIB alongside the specialized ones. Engineers can download the UBQS-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss switches
Ubiquoss OLT/access network appliances

Monitoring Examples

An administrator would read ubiSysInfo for device identity/version details and ubiSysTimeZone to confirm correct time-zone configuration, both important for correlating log timestamps and trap timing across a fleet of devices. ubiSysRedundancy exposes the current redundancy state directly from the system MIB, letting an operator confirm active/standby role without querying the dedicated redundancy MIB. ubiSystemMIBNotificationPrefix and ubiSystemMIBConformance define the trap and compliance framework for system-level events.

What Can Be Monitored

device identity/system info
time zone/NTP configuration
redundancy role reference
system-level notifications

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Integer32
IpAddress

From SNMPv2-TC

DisplayString
PhysAddress

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiSystemMIB	1.3.6.1.4.1.7800.100.1			The UBQS-SYSTEM-MIB is used to get the system information.
ubiSystemMIBObjects	1.3.6.1.4.1.7800.100.1.1
INT ubiSysReset	1.3.6.1.4.1.7800.100.1.1.1	INTEGER	write-only	Reset the system.
ubiSysInfo	1.3.6.1.4.1.7800.100.1.1.2
OID ubiSysModel	1.3.6.1.4.1.7800.100.1.1.2.1	OBJECT IDENTIFIER	read-only	The object identifier for the manufacturer model.
STR ubiHwVersion	1.3.6.1.4.1.7800.100.1.1.2.2	DisplayString	read-only	Hardware version of the system.
STR ubiSwVersion	1.3.6.1.4.1.7800.100.1.1.2.3	DisplayString	read-only	Software version of the system.
STR ubiReleaseDate	1.3.6.1.4.1.7800.100.1.1.2.4	DisplayString	read-only	The date of release for system OS.
STR ubiSerialNumber	1.3.6.1.4.1.7800.100.1.1.2.5	DisplayString	read-only	Serial number of the system.
PHY ubiSysPhysAddress	1.3.6.1.4.1.7800.100.1.1.2.6	PhysAddress	read-only	System mac address
STR ubiSysClock	1.3.6.1.4.1.7800.100.1.1.2.7	DisplayString	read-write	Current local time of the system. Clock SET: HH:MM:SS - Current Time - Day of the month MONTH - Month of the year (First three letters of the month) - Year SET Example 13:10:00 3 Jan 2010
ubiSysTimeZone	1.3.6.1.4.1.7800.100.1.1.2.8
STR ubiSysTimeZoneName	1.3.6.1.4.1.7800.100.1.1.2.8.1	DisplayString	read-write	System timezone name.
STR ubiSysTimeZoneOffset	1.3.6.1.4.1.7800.100.1.1.2.8.2	DisplayString	read-write	System timezone offset(Hours:Minutes).
ubiSysBanner	1.3.6.1.4.1.7800.100.1.1.2.9
STR ubiSysBannerLogin	1.3.6.1.4.1.7800.100.1.1.2.9.1	DisplayString	read-write	null string -> no banner login 'default' -> banner login default STRING -> banner login WORD
STR ubiSysBannerMotd	1.3.6.1.4.1.7800.100.1.1.2.9.2	DisplayString	read-write	null string -> no banner motd 'default' -> banner motd default STRING -> banner motd WORD
PHY ubiShelfPhysAddress	1.3.6.1.4.1.7800.100.1.1.2.10	PhysAddress	read-only	System shelf mac address.
STR ubiBspVersion	1.3.6.1.4.1.7800.100.1.1.2.11	DisplayString	read-only	System Bsp Versoin.
STR ubiSysResetReason	1.3.6.1.4.1.7800.100.1.1.2.12	DisplayString	accessible-for-notify	System Reset Reason.
ubiSysLedTest	1.3.6.1.4.1.7800.100.1.1.6
I32 ubiLedTestTimeout	1.3.6.1.4.1.7800.100.1.1.6.1	Integer32	read-write	The timeout to terminate the LED Test. If the timeout is zero, that is set to default.
INT ubiLedTestTrigger	1.3.6.1.4.1.7800.100.1.1.6.2	INTEGER	read-write	Trigger and stop the LED Test.
I32 ubiLedTestSlotId	1.3.6.1.4.1.7800.100.1.1.6.3	Integer32	read-write	LED test Slot id
ubiSysRedundancy	1.3.6.1.4.1.7800.100.1.1.7
ubiSysRedundancyInfoTable	1.3.6.1.4.1.7800.100.1.1.7.1		not-accessible	Table of redundancy information
ubiSysRedundancyInfoEntry	1.3.6.1.4.1.7800.100.1.1.7.1.1		not-accessible	Entry of redundancy information
INT ubiSCURedundancyRole	1.3.6.1.4.1.7800.100.1.1.7.1.1.1	INTEGER	read-only	SCU role
INT ubiSCUPosition	1.3.6.1.4.1.7800.100.1.1.7.1.1.2	INTEGER	read-only	SCU postion
INT ubiSCUMngLinkStatus	1.3.6.1.4.1.7800.100.1.1.7.1.1.3	INTEGER	read-only	mng port status of SCU
IP ubiSCUIpAddress	1.3.6.1.4.1.7800.100.1.1.7.1.1.4	IpAddress	read-only	IP address of SCU
INT ubiSCUPeerEquipStatus	1.3.6.1.4.1.7800.100.1.1.7.1.1.5	INTEGER	read-only	Peer Equip status of SCU
INT ubiSysRedundancyReload	1.3.6.1.4.1.7800.100.1.1.7.2	INTEGER	write-only	Reload Active and/or Standby
STR ubiSysRedundancyPeerImage	1.3.6.1.4.1.7800.100.1.1.7.3	DisplayString	write-only	Peer boot image
ubiSysBarCode	1.3.6.1.4.1.7800.100.1.1.8
ubiSysBarcodeSystem	1.3.6.1.4.1.7800.100.1.1.8.1
STR ubiSysBarcodeSystemString	1.3.6.1.4.1.7800.100.1.1.8.1.1	DisplayString	read-only	The textual barcode of system.
ubiSysBarcodePowerTable	1.3.6.1.4.1.7800.100.1.1.8.2		not-accessible	This table contains information for power barcode.
ubiSysBarcodePowerEntry	1.3.6.1.4.1.7800.100.1.1.8.2.1		not-accessible	Barcode Information about the power.
INT ubiSysBarcodePowerIndex	1.3.6.1.4.1.7800.100.1.1.8.2.1.1	INTEGER	read-only	A unique value for each power entity
STR ubiSysBarcodePowerString	1.3.6.1.4.1.7800.100.1.1.8.2.1.2	DisplayString	read-only	The textual barcode of power entity
ubiSysBarcodeFanTable	1.3.6.1.4.1.7800.100.1.1.8.3		not-accessible	This table contains information for fan barcode.
ubiSysBarcodeFanEntry	1.3.6.1.4.1.7800.100.1.1.8.3.1		not-accessible	Barcode Information about the fan
INT ubiSysBarcodeFanIndex	1.3.6.1.4.1.7800.100.1.1.8.3.1.1	INTEGER	read-only	A unique value for each fan entity
STR ubiSysBarcodeFanString	1.3.6.1.4.1.7800.100.1.1.8.3.1.2	DisplayString	read-only	The textual barcode of fan entity.
ubiSysBarcodeUplinkTable	1.3.6.1.4.1.7800.100.1.1.8.4		not-accessible	This table contains information for uplink module's barcode.
ubiSysBarcodeUplinkEntry	1.3.6.1.4.1.7800.100.1.1.8.4.1		not-accessible	Barcode Information about the uplink module.
INT ubiSysBarcodeUplinkIndex	1.3.6.1.4.1.7800.100.1.1.8.4.1.1	INTEGER	read-only	A unique value for each uplink module.
STR ubiSysBarcodeUplinkString	1.3.6.1.4.1.7800.100.1.1.8.4.1.2	DisplayString	read-only	The textual barcode of uplink module.
ubiSysBarcodeSlotTable	1.3.6.1.4.1.7800.100.1.1.8.5		not-accessible	This table contains information for slot's barcode.
ubiSysBarcodeSlotEntry	1.3.6.1.4.1.7800.100.1.1.8.5.1		not-accessible	Barcode Information about the slot.
INT ubiSysBarcodeSlotIndex	1.3.6.1.4.1.7800.100.1.1.8.5.1.1	INTEGER	read-only	A unique value for each slot.
STR ubiSysBarcodeSlotString	1.3.6.1.4.1.7800.100.1.1.8.5.1.2	DisplayString	read-only	The textual barcode of slot.
ubiSysBarcodeScuTable	1.3.6.1.4.1.7800.100.1.1.8.6		not-accessible	This table contains information for SCU's barcode.
ubiSysBarcodeScuEntry	1.3.6.1.4.1.7800.100.1.1.8.6.1		not-accessible	Barcode Information about the SCU.
INT ubiSysBarcodeScuIndex	1.3.6.1.4.1.7800.100.1.1.8.6.1.1	INTEGER	read-only	A unique value for each SCU.
STR ubiSysBarcodeScuString	1.3.6.1.4.1.7800.100.1.1.8.6.1.2	DisplayString	read-only	The textual barcode of SCU.
ubiSystemMIBNotificationPrefix	1.3.6.1.4.1.7800.100.1.2
ubiSystemMIBConformance	1.3.6.1.4.1.7800.100.1.3
ubiSysMIBCompliances	1.3.6.1.4.1.7800.100.1.3.1
ubiSysMIBCompliance	1.3.6.1.4.1.7800.100.1.3.1.1			The compliance statement for entities which implement the Ubiquoss system MIB.
ubiSysMIBGroups	1.3.6.1.4.1.7800.100.1.3.2
ubiSysInfoMIBGroup	1.3.6.1.4.1.7800.100.1.3.2.1			The collection of objects which are used to get the system information
ubiSysRscMIBGroup	1.3.6.1.4.1.7800.100.1.3.2.2			The collection of objects which are used to manager the system resource
ubiSysMiscGroup	1.3.6.1.4.1.7800.100.1.3.2.3			The collection of objects which are used to manager the miscellaneous information of system.

RFC description

UBQS system management MIB for proprietary system parameters, performance monitoring, and device status on UBQS platforms.

Start monitoring Ubiquoss switches, Ubiquoss OLT/access network appliances (device identity/NTP/redundancy-role status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-SYSTEM-MIB

What Is UBQS-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description