UBQS-INTERFACE-MIB

All MIBs › UBQS-INTERFACE-MIB

Organization: Ubiquoss Corp.

Last Updated: 2009-05-26

Description: MIB extending IF-MIB with Ubiquoss-specific physical port type, status, and per-interface operational details for Ubiquoss network equipment

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is UBQS-INTERFACE-MIB?

UBQS-INTERFACE-MIB is a Ubiquoss vendor extension to the standard IF-MIB (RFC 2863), adding vendor-specific physical port type, status, and per-interface operational detail for Ubiquoss network access/aggregation equipment. It exposes categories such as physical port classification, extended port status, and interface-level notification enable settings layered on top of the standard interface table. Its role in monitoring hardware status is central: it lets an operator see finer-grained port health and media-type detail (e.g., distinguishing a fiber/PON port fault from a simple administrative shutdown) than plain IF-MIB provides. It explicitly depends on and extends IF-MIB, so its objects are meaningful only alongside standard ifIndex-based interface data. It is deployed on Ubiquoss access switches and PON OLT/ONU equipment used in FTTx broadband access networks. Network engineers who download UBQS-INTERFACE-MIB typically compile it alongside standard IF-MIB so the vendor-specific port objects resolve correctly against ifIndex.

IPNetwork Monitor allows you to monitor SNMP objects defined in UBQS-INTERFACE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ubiquoss access-switch and PON OLT/ONU equipment, entire product line (extended port type/status)

Monitoring Examples

ubiSwitchPort would be indexed alongside ifIndex to expose vendor-specific physical port type and status detail not available in standard IF-MIB, such as a more granular link condition on a fiber or copper port. ubiIfNotificationEnables lets an operator enable per-interface traps so that a fault on a specific physical port triggers a notification via ubiInterfaceMIBNotificationPrefix. An admin monitoring a Ubiquoss access switch would poll ubiPortExt objects alongside ifOperStatus to distinguish an SFP/fiber port fault from a port that was administratively shut down.

What Can Be Monitored

physical port type
extended port operational status
per-interface notification enable state
switch port extended attributes

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

InterfaceIndexOrZero
ifAdminStatus	OBJECT-TYPE
ifIndex	OBJECT-TYPE
ifName	OBJECT-TYPE
ifOperStatus	OBJECT-TYPE
ifType	OBJECT-TYPE

From Q-BRIDGE-MIB

VlanIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From UBQS-SMI

ubiMgmtv2

OBJECT-IDENTITY

From UBQS-TC

IfOperStatusReason
UbiBridgeId
UbiPortList
Unsigned64

How to Use in IPNetwork Monitor

Example using ubiTrafficControlAlarmCount OID:

Select an Ubiquoss U9732S as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ubiTrafficControlAlarmCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports how many times a traffic-control alarm has been raised on this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count increases at all during a polling interval, so a new traffic-control alarm doesn't go unnoticed. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ubiInterfaceMIB	1.3.6.1.4.1.7800.100.4			A MIB module for the physical interface in IF-MIB (RFC2863).
ubiInterfaceMIBNotificationPrefix	1.3.6.1.4.1.7800.100.4.0
ubiInterfaceNotifications	1.3.6.1.4.1.7800.100.4.0.0
NTF ubiPortAutoNegoFault	1.3.6.1.4.1.7800.100.4.0.0.1			A ubiPortAutoNegoFault notification is sent at auto negotiation failure for a particular physical port.
ubiTrafficControlNotifications	1.3.6.1.4.1.7800.100.4.0.1
NTF ubiLoadMonitorRisingAlarm	1.3.6.1.4.1.7800.100.4.0.1.1			A ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its rising threshold.
NTF ubiLoadMonitorFallingAlarm	1.3.6.1.4.1.7800.100.4.0.1.2			A ubiLoadMonitorRisingAlarm notification is sent when the ubiLoadMonitorValue crosses its falling threshold.
NTF ubiTrafficControlRisingAlarm	1.3.6.1.4.1.7800.100.4.0.1.3			A ubiTrafficControlRisingAlarm is sent when ubiTrafficControlOneMinRate is greater than current threshold.
NTF ubiTrafficControlFallingAlarm	1.3.6.1.4.1.7800.100.4.0.1.4			A ubiTrafficControlFallingAlarm is sent when ubiTrafficControlOneMinRate is less than current threshold.
ubiInterfaceMIBObjects	1.3.6.1.4.1.7800.100.4.1
ubiIfNotificationEnables	1.3.6.1.4.1.7800.100.4.1.1
ubiGrp1	1.3.6.1.4.1.7800.100.4.1.1.1
T/F ubiLinkUpDownEnabled	1.3.6.1.4.1.7800.100.4.1.1.1.1	TruthValue	read-write	This variable indicates whether the system produces the notification of linkup/down.
ubiGrp2	1.3.6.1.4.1.7800.100.4.1.1.2
T/F ubiPortAutoNegoFaultEnabled	1.3.6.1.4.1.7800.100.4.1.1.2.1	TruthValue	read-write	This variable indicates whether the system produces the notification of the auto negotiation failure for a particular physical port.
BIT ubiLoadMonitorAlarmEnabled	1.3.6.1.4.1.7800.100.4.1.1.2.2	Bits	read-write	This variable indicates whether the system produces the notification of ubiLoadMonitorRisingAlarm and ubiLoadMonitorFallingAlarm.
T/F ubiTrafficControlAlarmEnabled	1.3.6.1.4.1.7800.100.4.1.1.2.3	TruthValue	read-write	This variable indicates whether the system produces the notification of ubiTrafficControlRisingAlarm and ubiTrafficControlFallingAlarm.
ubiPortTable	1.3.6.1.4.1.7800.100.4.1.2		not-accessible	This table contains objects which provide more information about physical interface.
ubiPortEntry	1.3.6.1.4.1.7800.100.4.1.2.1		not-accessible	An entry containing management information applicable to a particular physical interface.
STR ubiPortName	1.3.6.1.4.1.7800.100.4.1.2.1.1	DisplayString	read-only	The physical port name.
POR ubiPortType	1.3.6.1.4.1.7800.100.4.1.2.1.2	PortType	read-only	The type of the physical port.
INT ubiPortOperStatus	1.3.6.1.4.1.7800.100.4.1.2.1.3	INTEGER	read-only	The current operational status of the port. down(1) is down up(2) is up disable(3) is administratively down
INT ubiPortDuplex	1.3.6.1.4.1.7800.100.4.1.2.1.4	INTEGER	read-only	Indicates whether the port is operating in half- duplex, full-duplex or auto negotiation mode.
INT ubiPortSpeed	1.3.6.1.4.1.7800.100.4.1.2.1.5	INTEGER	read-only	The current operational speed of the port.
INT ubiPortAdminDuplex	1.3.6.1.4.1.7800.100.4.1.2.1.6	INTEGER	read-write	The desired duplex of the port.
INT ubiPortAdminSpeed	1.3.6.1.4.1.7800.100.4.1.2.1.7	INTEGER	read-write	The desired speed of the port.
I32 ubiPortMtu	1.3.6.1.4.1.7800.100.4.1.2.1.8	Integer32	read-write	The MTU value of the port.
INT ubiPortL2L3IfState	1.3.6.1.4.1.7800.100.4.1.2.1.9	INTEGER	read-write	The operational mode of the port whether the port is layer 2 or layer 3.
INT ubiPortAutoNegoFaultState	1.3.6.1.4.1.7800.100.4.1.2.1.10	INTEGER	accessible-for-notify	The link is down due to auto negotiation failure. This state indicates the state of auto negotiation failure for a particular port. But it's used for notification only.
INT ubiPortReset	1.3.6.1.4.1.7800.100.4.1.2.1.11	INTEGER	read-write	Reset the physical port.
INT ubiPortLocalSwitching	1.3.6.1.4.1.7800.100.4.1.2.1.12	INTEGER	read-write	Port local-switching
ubiPortExt	1.3.6.1.4.1.7800.100.4.1.3
ubiPortExtTable	1.3.6.1.4.1.7800.100.4.1.3.1		not-accessible	This table contains objects which provide more information about physical interface.
ubiPortExtEntry	1.3.6.1.4.1.7800.100.4.1.3.1.1		not-accessible	An entry containing management information applicable to a particular physical interface.
INT ubiPortGBICStatus	1.3.6.1.4.1.7800.100.4.1.3.1.1.1	INTEGER	read-only	The current operational status of the equipped slot.
POR ubiPortGBICType	1.3.6.1.4.1.7800.100.4.1.3.1.1.2	PortGBICTypeList	read-only	The current GBIC Type of the equipped slot. none(0): unequipped other(1) : equipped, none of the following list sfp(2) xfp(3) sfp-plus(4)
STR ubiPortGBICSerialNumber	1.3.6.1.4.1.7800.100.4.1.3.1.1.3	DisplayString	read-only	The serial number of this GBIC.
ubiSwitchPort	1.3.6.1.4.1.7800.100.4.1.4
ubiSwitchportTable	1.3.6.1.4.1.7800.100.4.1.4.1		not-accessible	A table contains the information for switchport.
ubiSwitchportEntry	1.3.6.1.4.1.7800.100.4.1.4.1.1		not-accessible	A list of information for each switchport.
STR ubiSwitchportName	1.3.6.1.4.1.7800.100.4.1.4.1.1.1	DisplayString	read-only	A textual string containing information about the interface.
UBI ubiSwitchportMode	1.3.6.1.4.1.7800.100.4.1.4.1.1.2	UbiSwitchportType	read-write	A port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge. providerNetworkPort(1) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections within a PBN or PBBN. customerNetworkPort(2) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections to the exterior of a PBN or PBBN. customerEdgePort(3) - Indicates a port is a C-tag aware port of a Provider Bridge used for connections to the exterior of a PBN or PBBN. customerBackbonePort(4) - Indicates a port is a I-tag aware port of a Backbone Edge Bridge's B-component. virtualInstancePort(5) - Indicates a port is a virtual S-tag aware port within a Backbone Edge Bridge's I-component which is responsible for handling S-tagged traffic for a specific backbone service instance. dBridgePort(6) - Indicates a port is a VLAN-unaware member of an 802.1D bridge. access(7) trunk(8) hybrid(9)
UBI ubiSwitchportBridgeId	1.3.6.1.4.1.7800.100.4.1.4.1.1.3	UbiBridgeId	read-write	This object is used to allocate the bridge group id.
VLA ubiSwitchportVlanNative	1.3.6.1.4.1.7800.100.4.1.4.1.1.4	VlanIndex	read-write	The native vlan of a switchport.
VLA ubiSwitchportVlanDefault	1.3.6.1.4.1.7800.100.4.1.4.1.1.5	VlanIndex	read-write	The default vlan of a switchport.
ubiSwitchPortVlanControlTable	1.3.6.1.4.1.7800.100.4.1.4.2		not-accessible	This table contains the control information of vlan for switchport.
ubiSwitchPortVlanControlEntry	1.3.6.1.4.1.7800.100.4.1.4.2.1		not-accessible	A list of vlan control for each switchport.
INT ubiSwitchportVlanTaggedSet	1.3.6.1.4.1.7800.100.4.1.4.2.1.1	INTEGER	read-write	The operational set of the switchport for a specific tagged vlan. If a value of set is all(4), the vlan index should be a zero.
INT ubiSwitchportVlanUntaggedSet	1.3.6.1.4.1.7800.100.4.1.4.2.1.2	INTEGER	read-write	The operational set of the switchport for a specific untagged vlan. If a value of set is all(4), the vlan index should be a zero.
INT ubiSwitchportVlanEgressTaggedSet	1.3.6.1.4.1.7800.100.4.1.4.2.1.3	INTEGER	read-write	The operational set of the switchport for a egress tagged vlan.
ubiSwitchVlanStackingTable	1.3.6.1.4.1.7800.100.4.1.4.3		not-accessible	This table contains the stacking information of vlan for switchport.
ubiSwitchVlanStackingEntry	1.3.6.1.4.1.7800.100.4.1.4.3.1		not-accessible	A list of vlan stacking for each switchport.
INT ubiVlanStackingMode	1.3.6.1.4.1.7800.100.4.1.4.3.1.1	INTEGER	read-write	vlan-stacking mode
STR ubiVlanStackingEthertype	1.3.6.1.4.1.7800.100.4.1.4.3.1.2	DisplayString	read-write	vlan-stacking ethertype (format : 0xhhhh)
ubiPortTrafficControl	1.3.6.1.4.1.7800.100.4.1.5
ubiLoadMonitorTable	1.3.6.1.4.1.7800.100.4.1.5.1		not-accessible	This table contains the information of load monitoring.
ubiLoadMonitorEntry	1.3.6.1.4.1.7800.100.4.1.5.1.1		not-accessible	A list of load monitoring configuration.
INT ubiLoadMonitorType	1.3.6.1.4.1.7800.100.4.1.5.1.1.1	INTEGER	read-only	This object specifies the type of load monitoring. For example, If type is input, ubiLoadMonitorVariable should be the particular variable related to the input statistics.
I32 ubiLoadMonitorInterval	1.3.6.1.4.1.7800.100.4.1.5.1.1.2	Integer32	read-create	The monitoring interval.
OID ubiLoadMonitorVariable	1.3.6.1.4.1.7800.100.4.1.5.1.1.3	OBJECT IDENTIFIER	read-only	The object identifier of the particular variable to be sampled for load monitoring. this variable is decided by ubiLoadMonitorType. variable mapping information for load monitoring: type object identifier --------------- ------------------------- INPUT ifHCInOctets (64bit) OUTPUT ifHCOutOctets (64bit) CRC ubiIfStatsInCRCErrors (64bit) DISCARD ifInDiscards (32bit) ERROR ifInErrors (32bit) STORM-DISCARD ubiStormTotalDiscards (64bit)
C64 ubiLoadMonitorValue	1.3.6.1.4.1.7800.100.4.1.5.1.1.4	Counter64	read-only	The sampling value of the statistic for the particular variable.
I32 ubiLoadMonitorCriticalThreshold	1.3.6.1.4.1.7800.100.4.1.5.1.1.5	Integer32	read-create	The critical threshold for the sampled statistics.
I32 ubiLoadMonitorMajorThreshold	1.3.6.1.4.1.7800.100.4.1.5.1.1.6	Integer32	read-create	The major threshold for the sampled statistics.
STR ubiLoadMonitorUnit	1.3.6.1.4.1.7800.100.4.1.5.1.1.7	DisplayString	read-only	The unit of the sampled statistics and threshold value.
INT ubiLoadMonitorAlarmType	1.3.6.1.4.1.7800.100.4.1.5.1.1.8	INTEGER	accessible-for-notify	The alarm type. This object is used for notification only.
ROW ubiLoadMonitorRowStatus	1.3.6.1.4.1.7800.100.4.1.5.1.1.9	RowStatus	read-create	The row status of this entry.
INT ubiLoadMonitorAlarmZone	1.3.6.1.4.1.7800.100.4.1.5.1.1.10	INTEGER	accessible-for-notify	This object indicates the current alarm zone.
ubiTrafficControl	1.3.6.1.4.1.7800.100.4.1.5.2
ubiTrafficControlConfig	1.3.6.1.4.1.7800.100.4.1.5.2.1
INT ubiTrafficControlReportInterval	1.3.6.1.4.1.7800.100.4.1.5.2.1.1	INTEGER	read-write	Interval when alarm is up/down according to traffic count
INT ubiTrafficControlObservingPeriod	1.3.6.1.4.1.7800.100.4.1.5.2.1.2	INTEGER	read-write	Period for counting traffic
INT ubiTrafficControlHighAlarmMode	1.3.6.1.4.1.7800.100.4.1.5.2.1.3	INTEGER	read-write	Action that is operated when traffic is over high-threshold
INT ubiTrafficControlLowAlarmMode	1.3.6.1.4.1.7800.100.4.1.5.2.1.4	INTEGER	read-write	Action that is operated when traffic is below low-threshold
ubiTrafficControlTable	1.3.6.1.4.1.7800.100.4.1.5.2.2		not-accessible	The table for traffic-control configuration
ubiTrafficControlEntry	1.3.6.1.4.1.7800.100.4.1.5.2.2.1		not-accessible	The entry representing traffic-control config. Index description a) ubiTrafficControlIfindex : interface index b) ubiTrafficControlBaseType : base type of traffic value - pps(1), kbps(2) c) ubiTrafficControlTrafficType : type of traffic value - all(1), unicast(2), broadcast(3), multicast(4) d) ubiTrafficControlDirection : direction of traffic value - inbound(1), outbound(2)
I32 ubiTrafficControlIfindex	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.1	Integer32	read-only	A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.
INT ubiTrafficControlBaseType	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.2	INTEGER	read-only	Base type of traffic.
INT ubiTrafficControlType	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.3	INTEGER	read-only	Type of traffic. Type based on KBPS must be only all(0). remains are only for pps.
INT ubiTrafficControlDirection	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.4	INTEGER	read-only	Direction of traffic.
I32 ubiTrafficControlHighThreshold	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.5	Integer32	read-create	Traffic high-threshold. Type based on KBPS could has threshold less than 1000000.
I32 ubiTrafficControlLowThreshold	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.6	Integer32	read-create	Traffic low-threshold. Type based on KBPS could has threshold less than 1000000.
INT ubiTrafficControlAction	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.7	INTEGER	read-create	Traffic action type.
INT ubiTrafficControlStatus	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.8	INTEGER	read-only	Interface's current status.
STR ubiTrafficControlAverageRate	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.9	DisplayString	read-only	Average rate of controlled traffic.
STR ubiTrafficControlOneMinRate	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.10	DisplayString	read-only	Rate of controlled traffic per 1 minute.
I32 ubiTrafficControlAlarmCountEx	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.11	Integer32	read-only	Number of alarmed times.
STR ubiTrafficControlLastAlarmTime	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.12	DisplayString	read-only	Last alarmed time
ROW ubiTrafficControlRowStatus	1.3.6.1.4.1.7800.100.4.1.5.2.2.1.13	RowStatus	read-create	Row Status
ubiClearTrafficControl	1.3.6.1.4.1.7800.100.4.1.5.2.3
I32 ubiClearTrafficControlInterface	1.3.6.1.4.1.7800.100.4.1.5.2.3.1	Integer32	read-write	If value is 0, clear all interface. If value is ifindex, clear specific interface (only physical interface)
INT ubiClearTrafficControlBaseType	1.3.6.1.4.1.7800.100.4.1.5.2.3.2	INTEGER	read-write	Traffic-control base type. 'none' value means all base type.
INT ubiClearTrafficControlType	1.3.6.1.4.1.7800.100.4.1.5.2.3.3	INTEGER	read-write	Traffic-control type. Type based on KBPS must be all. 'none' value means all traffic type.
INT ubiClearTrafficControlDirection	1.3.6.1.4.1.7800.100.4.1.5.2.3.4	INTEGER	read-write	Traffic-control direction. 'none' value means all direction.
INT ubiClearTrafficControlOperate	1.3.6.1.4.1.7800.100.4.1.5.2.3.5	INTEGER	read-write	clear excute
ubiIfStatistics	1.3.6.1.4.1.7800.100.4.1.6
ubiIfEgressQueueStatsTable	1.3.6.1.4.1.7800.100.4.1.6.1		not-accessible	This table contains the information for egress queue statistics.
ubiIfEgressQueueStatsEntry	1.3.6.1.4.1.7800.100.4.1.6.1.1		not-accessible	A list of the port that configure cos feild. that port collects the pass and drop statistics for egress queue.
I32 ubiIfEqStatsQueueId	1.3.6.1.4.1.7800.100.4.1.6.1.1.1	Integer32	not-accessible	The queue identifier.
C64 ubiIfEqStatsPassOctets	1.3.6.1.4.1.7800.100.4.1.6.1.1.2	Counter64	read-only	The pass counter for bytes.
C64 ubiIfEqStatsDropOctets	1.3.6.1.4.1.7800.100.4.1.6.1.1.3	Counter64	read-only	The drop counter for bytes.
CTR ubiIfEqStatsPassPkts	1.3.6.1.4.1.7800.100.4.1.6.1.1.4	Counter	read-only	The pass counter for packets.
CTR ubiIfEqStatsDropPkts	1.3.6.1.4.1.7800.100.4.1.6.1.1.5	Counter	read-only	The drop counter for packets.
STR ubiIfEqStatsQueueDescr	1.3.6.1.4.1.7800.100.4.1.6.1.1.6	DisplayString	read-write	A textual string containing information about the interface's each queue.
ubiIfStatsTable	1.3.6.1.4.1.7800.100.4.1.6.2		not-accessible	This table contains the statistics for physical port.
ubiIfStatsEntry	1.3.6.1.4.1.7800.100.4.1.6.2.1		not-accessible	A Entry contains the statistics of a particular physical port.
C64 ubiIfStatsInPkts	1.3.6.1.4.1.7800.100.4.1.6.2.1.1	Counter64	read-only	The number of input packets for a given physical port.
C64 ubiIfStatsOutPkts	1.3.6.1.4.1.7800.100.4.1.6.2.1.2	Counter64	read-only	The number of output packets for a given physical interface.
C64 ubiIfStatsInCRCErrors	1.3.6.1.4.1.7800.100.4.1.6.2.1.3	Counter64	read-only	The number of input CRC errors for a given interface.
INT ubiIfStatsCounterClear	1.3.6.1.4.1.7800.100.4.1.6.2.1.14	INTEGER	read-write	Initialize the counter
INT ubiIfStatsSnmpClear	1.3.6.1.4.1.7800.100.4.1.6.2.1.15	INTEGER	read-write	Initialize the statistics in this table.
ubiTrafficRateTable	1.3.6.1.4.1.7800.100.4.1.6.3		not-accessible	traffic rate per interface
ubiTrafficRateEntry	1.3.6.1.4.1.7800.100.4.1.6.3.1		not-accessible	traffic rate per interface
C64 ubiIfStatsInTrafficRate	1.3.6.1.4.1.7800.100.4.1.6.3.1.1	Counter64	read-only
C64 ubiIfStatsOutTrafficRate	1.3.6.1.4.1.7800.100.4.1.6.3.1.2	Counter64	read-only
ubiPortControl	1.3.6.1.4.1.7800.100.4.1.7
ubiFlowControlTable	1.3.6.1.4.1.7800.100.4.1.7.1		not-accessible	The table of flowcontrol information on physical ports.
ubiFlowControlEntry	1.3.6.1.4.1.7800.100.4.1.7.1.1		not-accessible	An entry of flowcontrol information on physical port.
INT ubiFlowctrlReceive	1.3.6.1.4.1.7800.100.4.1.7.1.1.1	INTEGER	read-write	flowcontrol on receive.
INT ubiFlowctrlSend	1.3.6.1.4.1.7800.100.4.1.7.1.1.2	INTEGER	read-write	flowcontrol on send
UBI ubiFlowctrlWatermark	1.3.6.1.4.1.7800.100.4.1.7.1.1.3	UbiFlowctrlWatermark	read-write	flowcontrol watermark value
ubiRateLimit	1.3.6.1.4.1.7800.100.4.1.7.2
ubiRateLimitTable	1.3.6.1.4.1.7800.100.4.1.7.2.1		not-accessible	The table of rate-limit information on physical ports
ubiRateLimitEntry	1.3.6.1.4.1.7800.100.4.1.7.2.1.1		not-accessible	An entry of rate-limit information on physical port
I32 ubiEgressTrafficRate	1.3.6.1.4.1.7800.100.4.1.7.2.1.1.1	Integer32	read-write	egress traffic rate
I32 ubiEgressBucketSize	1.3.6.1.4.1.7800.100.4.1.7.2.1.1.2	Integer32	read-write	egress bucket size
STR ubiIngressLevel	1.3.6.1.4.1.7800.100.4.1.7.2.1.1.3	DisplayString	read-write	ingress level, range from 0.01 to 100.00
ubiRateLimitQueueEgressTable	1.3.6.1.4.1.7800.100.4.1.7.2.2		not-accessible	The table of rate-limit q-egress information on physical ports
ubiRateLimitQueueEgressEntry	1.3.6.1.4.1.7800.100.4.1.7.2.2.1		not-accessible	An entry of rate-limit q-egress information on physical port
I32 ubiQueueId	1.3.6.1.4.1.7800.100.4.1.7.2.2.1.1	Integer32	not-accessible	queue id
I32 ubiQueueEgressTrafficRate	1.3.6.1.4.1.7800.100.4.1.7.2.2.1.2	Integer32	read-write	q-egress traffic rate
I32 ubiQueueEgressBucketSize	1.3.6.1.4.1.7800.100.4.1.7.2.2.1.3	Integer32	read-write	q-egress bucket size
ubiStormControlTable	1.3.6.1.4.1.7800.100.4.1.7.3		not-accessible	The table of storm-control information on physical ports
ubiStormControlEntry	1.3.6.1.4.1.7800.100.4.1.7.3.1		not-accessible	An entry of storm-control information on physical port
STR ubiBroadcastLevel	1.3.6.1.4.1.7800.100.4.1.7.3.1.1	DisplayString	read-write	broadcast control level, range from 0.01 to 100.00
STR ubiMulticastLevel	1.3.6.1.4.1.7800.100.4.1.7.3.1.2	DisplayString	read-write	multicast control level, range from 0.01 to 100.00
STR ubiUnicastLevel	1.3.6.1.4.1.7800.100.4.1.7.3.1.3	DisplayString	read-write	unicast control level, range from 0.01 to 100.00
ubiStormDiscardStats	1.3.6.1.4.1.7800.100.4.1.7.4
INT ubiStormDiscardStatsClear	1.3.6.1.4.1.7800.100.4.1.7.4.1	INTEGER	read-write	Initialize the counters for discarded packet by Storm-Control.
ubiStormDiscardStatsTable	1.3.6.1.4.1.7800.100.4.1.7.4.2		not-accessible	This table contains the statistics of discarded packets by Storm-control on physical ports
ubiStormDiscardStatsEntry	1.3.6.1.4.1.7800.100.4.1.7.4.2.1		not-accessible	An entry of storm-control discard statistics on physical port
C64 ubiStormUnicastDiscards	1.3.6.1.4.1.7800.100.4.1.7.4.2.1.1	Counter64	read-only	The number of discarded Unicast packets by Storm-control for a given interface.
C64 ubiStormMulticastDiscards	1.3.6.1.4.1.7800.100.4.1.7.4.2.1.2	Counter64	read-only	The number of discarded Multicast packets by Storm-control for a given interface.
C64 ubiStormBroadcastDiscards	1.3.6.1.4.1.7800.100.4.1.7.4.2.1.3	Counter64	read-only	The number of discarded Broadcast packets by Storm-control for a given interface.
C64 ubiStormTotalDiscards	1.3.6.1.4.1.7800.100.4.1.7.4.2.1.4	Counter64	read-only	The Total number of discarded packets by Storm-control for a given interface.
ubiIfErps	1.3.6.1.4.1.7800.100.4.1.8
ubiIfErpsTable	1.3.6.1.4.1.7800.100.4.1.8.1		not-accessible	The table of ERPS information on interface.
ubiIfErpsEntry	1.3.6.1.4.1.7800.100.4.1.8.1.1		not-accessible	The entry of ERPS information on interface.
I32 ubiIfErpsAggMinLink	1.3.6.1.4.1.7800.100.4.1.8.1.1.1	Integer32	read-write	Minmum Link count to activate Port-channel in ERPS. - To activate Port-channel, actived members of port-channel must be minmum link count at least.
ubiInterfaceMIBConformance	1.3.6.1.4.1.7800.100.4.2
ubiInterfaceMIBCompliances	1.3.6.1.4.1.7800.100.4.2.1
ubiInterfaceMIBCompliance	1.3.6.1.4.1.7800.100.4.2.1.1			The compliance statement for entities which implement the UBQS-INTERFACE-MIB
ubiInterfaceMIBGroups	1.3.6.1.4.1.7800.100.4.2.2
ubiPortGroup	1.3.6.1.4.1.7800.100.4.2.2.1			A collection of objects containing information about physical port.
ubiIfStatsGroup	1.3.6.1.4.1.7800.100.4.2.2.2			A collection of objects containing packet statistics for a given port.
ubiSwitchportGroup	1.3.6.1.4.1.7800.100.4.2.2.3			A collection of objects containing the switchport information.

RFC description

Ubiquity QoS interface management MIB for monitoring and controlling quality of service parameters on network interfaces.

Start monitoring Ubiquoss access-switch and PON OLT/ONU equipment, entire product line (extended port type/status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download UBQS-INTERFACE-MIB