All MIBs › UBQS-INTERFACE-MIB › ubiSwitchportMode
ubiSwitchportMode
Module: UBQS-INTERFACE-MIB
OID (symbolic): UBQS-INTERFACE-MIB::ubiSwitchportMode
OID (numeric): 1.3.6.1.4.1.7800.100.4.1.4.1.1.2
Node type: OBJECT-TYPE
Type: UbiSwitchportType
Access: read-write
Description: A port type. The possible port types are: customerVlanPort(0) - Indicates a port is a C-tag aware port of an enterprise VLAN aware bridge.
providerNetworkPort(1) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections within a PBN or PBBN.
customerNetworkPort(2) - Indicates a port is an S-tag aware port of a Provider Bridge or Backbone Edge Bridge used for connections to the exterior of a PBN or PBBN.
customerEdgePort(3) - Indicates a port is a C-tag aware port of a Provider Bridge used for connections to the exterior of a PBN or PBBN.
customerBackbonePort(4) - Indicates a port is a I-tag aware port of a Backbone Edge Bridge's B-component.
virtualInstancePort(5) - Indicates a port is a virtual S-tag aware port within a Backbone Edge Bridge's I-component which is responsible for handling S-tagged traffic for a specific backbone service instance.
dBridgePort(6) - Indicates a port is a VLAN-unaware member of an 802.1D bridge. access(7) trunk(8) hybrid(9)
What is ubiSwitchportMode?
Sets the 802.1Q port role for this switchport - the common values are access(7), trunk(8), and hybrid(9), while the remaining values (customerVlanPort, providerNetworkPort, customerNetworkPort, customerEdgePort, customerBackbonePort, virtualInstancePort, dBridgePort) apply only on carrier-grade provider-bridging (PBB) deployments.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.7800.100.4.1.4.1.1.2 snmpwalk -v2c -c public <target> UBQS-INTERFACE-MIB::ubiSwitchportMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.7800.100.4.1.4.1.1.2.1 snmpget -v2c -c public <target> UBQS-INTERFACE-MIB::ubiSwitchportMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.7800.100.4.1.4.1.1.2.1 s <value>
Start monitoring Ubiquoss access-switch and PON OLT/ONU equipment, entire product line (extended port type/status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBQS-INTERFACE-MIB::ubiSwitchportMode OID value, configure state conditions and alerts, and monitor any Ubiquoss access-switch and PON OLT/ONU equipment, entire product line (extended port type/status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.7800 | ubiquoss | UBIQUOSS-SMI |
| 1.3.6.1.4.1.7800.100 | ubiMgmtv2 | UBQS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.7800.100.4 | ubiInterfaceMIB | UBQS-INTERFACE-MIB |
| 1.3.6.1.4.1.7800.100.4.1 | ubiInterfaceMIBObjects | UBQS-INTERFACE-MIB |
| 1.3.6.1.4.1.7800.100.4.1.4 | ubiSwitchPort | UBQS-INTERFACE-MIB |
| 1.3.6.1.4.1.7800.100.4.1.4.1 | ubiSwitchportTable | UBQS-INTERFACE-MIB |
| 1.3.6.1.4.1.7800.100.4.1.4.1.1 | ubiSwitchportEntry | UBQS-INTERFACE-MIB |
| 1.3.6.1.4.1.7800.100.4.1.4.1.1.2 | ubiSwitchportMode | UBQS-INTERFACE-MIB |