All MIBs › UBNT-AirFIBER-MIB › rxOverload0
rxOverload0
Module: UBNT-AirFIBER-MIB
OID (symbolic): UBNT-AirFIBER-MIB::rxOverload0
OID (numeric): 1.3.6.1.4.1.41112.1.3.2.1.13
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Radio Chain 0 RX Overloaded
What is rxOverload0?
Indicates whether radio chain 0's receiver is currently overloaded (receiving too strong a signal, which can also cause performance problems); if true on a short link, an admin might need to reduce the far end's transmit power or add attenuation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.41112.1.3.2.1.13 snmpwalk -v2c -c public <target> UBNT-AirFIBER-MIB::rxOverload0
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.41112.1.3.2.1.13.1 snmpget -v2c -c public <target> UBNT-AirFIBER-MIB::rxOverload0.1
Start monitoring Ubiquiti Networks AirFiber point-to-point radios (frequency/power/modulation config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBNT-AirFIBER-MIB::rxOverload0 OID value, configure state conditions and alerts, and monitor any Ubiquiti Networks AirFiber point-to-point radios (frequency/power/modulation config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.41112 | ubnt | UBNT-MIB |
| 1.3.6.1.4.1.41112.1 | ubntMIB | UBNT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.41112.1.3 | ubntAirFIBER | UBNT-AirFIBER-MIB |
| 1.3.6.1.4.1.41112.1.3.2 | airFiberStatus | UBNT-AirFIBER-MIB |
| 1.3.6.1.4.1.41112.1.3.2.1 | airFiberStatusEntry | UBNT-AirFIBER-MIB |
| 1.3.6.1.4.1.41112.1.3.2.1.13 | rxOverload0 | UBNT-AirFIBER-MIB |