All MIBs › UBNT-AirFIBER-MIB › curTXModRate
curTXModRate
Module: UBNT-AirFIBER-MIB
OID (symbolic): UBNT-AirFIBER-MIB::curTXModRate
OID (numeric): 1.3.6.1.4.1.41112.1.3.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Current Transmit Modulation Rate
What is curTXModRate?
Reports the modulation rate the radio is actually transmitting at right now, from robust QPSK-SISO-1/4x up to dense QAM256-MIMO-8x; when modRateControl is set to automatic, an admin watches this value drop during bad weather or interference as the radio trades throughput for reliability.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.41112.1.3.2.1.2 snmpwalk -v2c -c public <target> UBNT-AirFIBER-MIB::curTXModRate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.41112.1.3.2.1.2.1 snmpget -v2c -c public <target> UBNT-AirFIBER-MIB::curTXModRate.1
Start monitoring Ubiquiti Networks AirFiber point-to-point radios (frequency/power/modulation config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the UBNT-AirFIBER-MIB::curTXModRate OID value, configure state conditions and alerts, and monitor any Ubiquiti Networks AirFiber point-to-point radios (frequency/power/modulation config status) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.41112 | ubnt | UBNT-MIB |
| 1.3.6.1.4.1.41112.1 | ubntMIB | UBNT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.41112.1.3 | ubntAirFIBER | UBNT-AirFIBER-MIB |
| 1.3.6.1.4.1.41112.1.3.2 | airFiberStatus | UBNT-AirFIBER-MIB |
| 1.3.6.1.4.1.41112.1.3.2.1 | airFiberStatusEntry | UBNT-AirFIBER-MIB |
| 1.3.6.1.4.1.41112.1.3.2.1.2 | curTXModRate | UBNT-AirFIBER-MIB |