TRANGOM5830S-MIB

All MIBs › TRANGOM5830S-MIB

Category: Wireless Backhaul

Description:

Covers configuration and link statistics for Trango M5830S point-to-multipoint wireless backhaul radios.

Imported Objects

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

What Is TRANGOM5830S-MIB?

TRANGOM5830S-MIB is a private vendor MIB from Trango Systems for managing the M5830S, a point-to-multipoint wireless backhaul radio product, covering its configuration and link-quality/traffic statistics. It exposes configuration data (radio and link parameters) alongside performance data such as wireless link statistics used to gauge backhaul quality. In monitoring terms this MIB supports checking the operational/software status of the wireless link -- link statistics such as signal quality, throughput, or error counts that reveal a degrading microwave backhaul path -- functioning similarly to how other radio MIBs expose RF and hardware status even though no explicit object list is available here. No dependency on other MIBs is indicated in the available module information, though it likely relies on standard interface conventions (IF-MIB) for tying radio ports to logical interfaces. It is deployed on wireless ISPs (WISPs) or enterprise point-to-multipoint backhaul links using Trango M5830S radios to connect remote sites. Engineers can download the TRANGOM5830S-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TRANGOM5830S-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Trango M5830S point-to-multipoint wireless backhaul radio

Monitoring Examples

No sample object names were provided for this module, so a concrete polling scenario cannot be described with certainty; typically for this class of radio product an admin would poll link statistics (signal strength/SNR, throughput, retransmit or error counters) to detect a degrading point-to-multipoint wireless link before it drops entirely.

OIDs

OID symbolic	OID numeric	Type	Access	Description
apipconfig	1.3.6.1.4.1.5454.1.20.1.19
IP apipconfigDefaultGateway	1.3.6.1.4.1.5454.1.20.1.19.3	IpAddress	read-write	New Default gateway. It will be saved to non-volatile memory and activated in 5 secs.
IP apipconfigIpAddress	1.3.6.1.4.1.5454.1.20.1.19.1	IpAddress	read-write	New IP address. It will be saved to non-volatile memory and activated in 5 secs.
IP apipconfigSubnet	1.3.6.1.4.1.5454.1.20.1.19.2	IpAddress	read-write	New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs.
apism	1.3.6.1.4.1.5454.1.20.2.4
INT apismRxThreshold	1.3.6.1.4.1.5454.1.20.2.4.5	INTEGER	read-write	ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled.
INT apismServiceRadius	1.3.6.1.4.1.5454.1.20.2.4.4	INTEGER	read-write	ISM RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one.
INT apismTargetRSSI	1.3.6.1.4.1.5454.1.20.2.4.6	INTEGER	read-write	ISM RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from SU shall be no less than -75dBm.
INT apismTxPower	1.3.6.1.4.1.5454.1.20.2.4.3	INTEGER	read-write	ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apismTxPowerMax and apismTxPowerMin for power setting range.
INT apismTxPowerMax	1.3.6.1.4.1.5454.1.20.2.4.1	INTEGER	read-only	The maximum ISM Tx power value can be set (in dBm).
INT apismTxPowerMin	1.3.6.1.4.1.5454.1.20.2.4.2	INTEGER	read-only	The minimum ISM Tx power value can be set (in dBm).
NTF apOpModeFailure	1.3.6.1.4.1.5454.1.20.16.0.9			The SNMP trap that is generated when a specific AP not being in ap mode during boot up sequence.
aprf	1.3.6.1.4.1.5454.1.20.2
INT aprfActiveChannel	1.3.6.1.4.1.5454.1.20.2.1	INTEGER	read-write	It specifies the current channel number the radio operates on.
STR aprfActivePolarization	1.3.6.1.4.1.5454.1.20.2.2	DisplayString	read-write	It specifies the current polarization the radio operates on.
aprftable	1.3.6.1.4.1.5454.1.20.2.3
INT aprftableChannel1	1.3.6.1.4.1.5454.1.20.2.3.1	INTEGER	read-write	RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel10	1.3.6.1.4.1.5454.1.20.2.3.10	INTEGER	read-write	RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel11	1.3.6.1.4.1.5454.1.20.2.3.11	INTEGER	read-write	RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel12	1.3.6.1.4.1.5454.1.20.2.3.12	INTEGER	read-write	RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel13	1.3.6.1.4.1.5454.1.20.2.3.13	INTEGER	read-write	RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel14	1.3.6.1.4.1.5454.1.20.2.3.14	INTEGER	read-write	RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel15	1.3.6.1.4.1.5454.1.20.2.3.15	INTEGER	read-write	RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel16	1.3.6.1.4.1.5454.1.20.2.3.16	INTEGER	read-write	RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel17	1.3.6.1.4.1.5454.1.20.2.3.17	INTEGER	read-write	RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel18	1.3.6.1.4.1.5454.1.20.2.3.18	INTEGER	read-write	RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel19	1.3.6.1.4.1.5454.1.20.2.3.19	INTEGER	read-write	RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel2	1.3.6.1.4.1.5454.1.20.2.3.2	INTEGER	read-write	RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel20	1.3.6.1.4.1.5454.1.20.2.3.20	INTEGER	read-write	RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel21	1.3.6.1.4.1.5454.1.20.2.3.21	INTEGER	read-write	RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel22	1.3.6.1.4.1.5454.1.20.2.3.22	INTEGER	read-write	RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel23	1.3.6.1.4.1.5454.1.20.2.3.23	INTEGER	read-write	RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel24	1.3.6.1.4.1.5454.1.20.2.3.24	INTEGER	read-write	RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel25	1.3.6.1.4.1.5454.1.20.2.3.25	INTEGER	read-write	RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel26	1.3.6.1.4.1.5454.1.20.2.3.26	INTEGER	read-write	RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel27	1.3.6.1.4.1.5454.1.20.2.3.27	INTEGER	read-write	RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel28	1.3.6.1.4.1.5454.1.20.2.3.28	INTEGER	read-write	RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel29	1.3.6.1.4.1.5454.1.20.2.3.29	INTEGER	read-write	RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel3	1.3.6.1.4.1.5454.1.20.2.3.3	INTEGER	read-write	RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel30	1.3.6.1.4.1.5454.1.20.2.3.30	INTEGER	read-write	RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel4	1.3.6.1.4.1.5454.1.20.2.3.4	INTEGER	read-write	RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel5	1.3.6.1.4.1.5454.1.20.2.3.5	INTEGER	read-write	RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel6	1.3.6.1.4.1.5454.1.20.2.3.6	INTEGER	read-write	RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel7	1.3.6.1.4.1.5454.1.20.2.3.7	INTEGER	read-write	RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel8	1.3.6.1.4.1.5454.1.20.2.3.8	INTEGER	read-write	RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel9	1.3.6.1.4.1.5454.1.20.2.3.9	INTEGER	read-write	RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
apswitches	1.3.6.1.4.1.5454.1.20.1.13
INT apswitchesBlockBroadcastMulticast	1.3.6.1.4.1.5454.1.20.1.13.1	INTEGER	read-write	This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link.
INT apswitchesHTTPD	1.3.6.1.4.1.5454.1.20.1.13.5	INTEGER	read-write	When it is turned on, then the AP is accessible for configuring via web browser (e.g. IE or Nescape).
INT apswitchesSUtoSU	1.3.6.1.4.1.5454.1.20.1.13.2	INTEGER	read-write	This switch enables or disables the peer-to-peer feature among SUs through the AP. Before this switch is turned on, all SUs that want to communicate with each other have to be assigned to the same group.
INT apswitchesTFTPD	1.3.6.1.4.1.5454.1.20.1.13.4	INTEGER	read-write	This switch enables or disables the TFTP operation. When it is turned on, then the AP will be ready for code download.
apsystem	1.3.6.1.4.1.5454.1.20.1
INT apsystemActivateOpmode	1.3.6.1.4.1.5454.1.20.1.7	INTEGER	read-write	Engage AP unit to ap operation mode.
INT apsystemAPId	1.3.6.1.4.1.5454.1.20.1.4	INTEGER	read-write	AP ID. Each AP in a cluster shall have unique AP ID.
INT apsystemBaseId	1.3.6.1.4.1.5454.1.20.1.3	INTEGER	read-write	Cluster that the AP belongs to. All APs and SUs in the same cluster shall have the same Base ID.
INT apsystemCurOpMode	1.3.6.1.4.1.5454.1.20.1.6	INTEGER	read-only	Radio's current operation mode.
IP apsystemDefaultGateway	1.3.6.1.4.1.5454.1.20.1.10	IpAddress	read-only	Current Default gateway.
INT apsystemDefOpMode	1.3.6.1.4.1.5454.1.20.1.5	INTEGER	read-write	The operation mode (ap or off) the radio is on after reboot/power cycle.
OCT apsystemDeviceId	1.3.6.1.4.1.5454.1.20.1.2	OCTET STRING	read-only	MAC address.
IP apsystemIpAddr	1.3.6.1.4.1.5454.1.20.1.8	IpAddress	read-only	Current IP address.
INT apsystemMIRThreshold	1.3.6.1.4.1.5454.1.20.1.14	INTEGER	read-write	Maximum Information Rate (in Kbps), the AP allows the network to utilize before enforcing CIR on each subscriber.
STR apsystemReadCommStr	1.3.6.1.4.1.5454.1.20.1.11	DisplayString	read-write	SNMP agent read community string. It is used for authentication purpose.
INT apsystemReboot	1.3.6.1.4.1.5454.1.20.1.18	INTEGER	read-write	Reboot the radio.
IP apsystemSubnet	1.3.6.1.4.1.5454.1.20.1.9	IpAddress	read-only	Current Subnet mask.
INT apsystemTemperature	1.3.6.1.4.1.5454.1.20.1.16	INTEGER	read-only	Current AP temperature value (in Celsius).
INT apsystemUpdateFlashAndActivate	1.3.6.1.4.1.5454.1.20.1.17	INTEGER	read-write	Save system setting values to Flash and activate the settings.
STR apsystemWriteCommStr	1.3.6.1.4.1.5454.1.20.1.12	DisplayString	read-write	SNMP agent write community string. It is used for authentication purpose.
aptraffic	1.3.6.1.4.1.5454.1.20.1.15
CTR aptrafficEthInOctets	1.3.6.1.4.1.5454.1.20.1.15.5	Counter	read-only	Number of payload octets received on Ethernet port.
CTR aptrafficEthOutOctets	1.3.6.1.4.1.5454.1.20.1.15.6	Counter	read-only	Number of payload octets transmitted on Ethernet port.
INT aptrafficEthRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.1	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on Ethernet port over the last 60 seconds.
INT aptrafficEthTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.2	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on Ethernet port over the last 60 seconds.
CTR aptrafficRfInOctets	1.3.6.1.4.1.5454.1.20.1.15.7	Counter	read-only	Number of octets of SUs payload received from RF port.
CTR aptrafficRfOutOctets	1.3.6.1.4.1.5454.1.20.1.15.8	Counter	read-only	Number of octets of SUs payload transmitted to RF port.
INT aptrafficRfRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.3	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on RF port over the last 60 seconds.
INT aptrafficRfTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.4	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on RF port over the last 60 seconds.
STR aptrpCommStr	1.3.6.1.4.1.5454.1.20.4.4.1.3	DisplayString	read-write	Specific trap community string.
INT aptrpEnable	1.3.6.1.4.1.5454.1.20.4.4.1.4	INTEGER	read-write	Enable a specific Trango trap event or not.
INT aptrpID	1.3.6.1.4.1.5454.1.20.4.4.1.2	INTEGER	read-only	Specific trap ID.
INT aptrpIndex	1.3.6.1.4.1.5454.1.20.4.4.1.1	INTEGER	read-only	Trap index.
apunii	1.3.6.1.4.1.5454.1.20.2.5
INT apuniiRxThreshold	1.3.6.1.4.1.5454.1.20.2.5.5	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP.
INT apuniiServiceRadius	1.3.6.1.4.1.5454.1.20.2.5.4	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one.
INT apuniiTargetRSSI	1.3.6.1.4.1.5454.1.20.2.5.6	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold.
INT apuniiTxPower	1.3.6.1.4.1.5454.1.20.2.5.3	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range.
INT apuniiTxPowerMax	1.3.6.1.4.1.5454.1.20.2.5.1	INTEGER	read-only	This object is only applicable to M5830S radio. The maximum UNII Tx power value can be set (in dBm).
INT apuniiTxPowerMin	1.3.6.1.4.1.5454.1.20.2.5.2	INTEGER	read-only	This object is only applicable to M5830S radio. The minimum UNII Tx power value can be set (in dBm).
apversion	1.3.6.1.4.1.5454.1.20.1.1
OCT apversionChecksum	1.3.6.1.4.1.5454.1.20.1.1.4	OCTET STRING	read-only	AP firmware checksum.
OCT apversionFPGA	1.3.6.1.4.1.5454.1.20.1.1.3	OCTET STRING	read-only	FPGA firmware version.
STR apversionFW	1.3.6.1.4.1.5454.1.20.1.1.2	DisplayString	read-only	Main firmware version. Format: HD.
OCT apversionHW	1.3.6.1.4.1.5454.1.20.1.1.1	OCTET STRING	read-only	Hardware version.
m5830sap	1.3.6.1.4.1.5454.1.20
m5830straps	1.3.6.1.4.1.5454.1.20.16
mibinfo	1.3.6.1.4.1.5454.1.20.5
STR mibinfoVersion	1.3.6.1.4.1.5454.1.20.5.1	DisplayString	read-only	Trango MIB Version.
su	1.3.6.1.4.1.5454.1.20.3
INT suAssociation	1.3.6.1.4.1.5454.1.20.3.6.1.13	INTEGER	read-only	Subscriber unit association status.
OCT suChecksum	1.3.6.1.4.1.5454.1.20.3.6.1.12	OCTET STRING	read-only	Subscriber unit firmware checksum.
INT suCIR	1.3.6.1.4.1.5454.1.20.3.6.1.5	INTEGER	read-only	It is the Committed Information Rate (in Kbps) the AP allocates to SU.
sudb	1.3.6.1.4.1.5454.1.20.3.5
INT sudbAdd	1.3.6.1.4.1.5454.1.20.3.5.7	INTEGER	read-write	Add a subscriber (specified in object sudbDeleteOrAddID) to the subscriber database.
INT sudbAddCIR	1.3.6.1.4.1.5454.1.20.3.5.5	INTEGER	read-write	It is the Committed Information Rate (in Kbps) the AP allocates to SU.
OCT sudbAddMAC	1.3.6.1.4.1.5454.1.20.3.5.2	OCTET STRING	read-write	It is the MAC address of the subscriber unit, which can be found on the back of the SU.
INT sudbAddMIR	1.3.6.1.4.1.5454.1.20.3.5.6	INTEGER	read-write	It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
INT sudbAddPolling	1.3.6.1.4.1.5454.1.20.3.5.3	INTEGER	read-write	It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network.
INT sudbAddSUtoSU	1.3.6.1.4.1.5454.1.20.3.5.4	INTEGER	read-write	It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency.
INT sudbDelete	1.3.6.1.4.1.5454.1.20.3.5.8	INTEGER	read-write	Delete a subscriber (specified in object sudbDeleteOrAddID) from the subscriber database.
INT sudbDeleteOrAddID	1.3.6.1.4.1.5454.1.20.3.5.1	INTEGER	read-write	Subscriber unit ID (1..8190). Each subscriber in a sector shall have a unique ID.
INT suDIstance	1.3.6.1.4.1.5454.1.20.3.6.1.14	INTEGER	read-only	Distance of SU (in mile).
INT suEthRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.18	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on the Ethernet port over the period specified by suStatisticsSamplePeriod.
INT suEthTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.19	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on the Ethernet port over the period specified by suStatisticsSamplePeriod.
OCT suFPGAVer	1.3.6.1.4.1.5454.1.20.3.6.1.11	OCTET STRING	read-only	Subscriber unit FPGA firmware version.
STR suFWVer	1.3.6.1.4.1.5454.1.20.3.6.1.10	DisplayString	read-only	Subscriber unit main firmware version.
OCT suHWVer	1.3.6.1.4.1.5454.1.20.3.6.1.9	OCTET STRING	read-only	Subscriber unit Hardware Version.
INT suID	1.3.6.1.4.1.5454.1.20.3.6.1.1	INTEGER	read-only	Subscriber unit ID. Each subscriber in a sector shall have a unique ID.
suInfoEntry	1.3.6.1.4.1.5454.1.20.3.6.1		not-accessible	Information about a specific subscriber unit retrieved by its ID number.
suInfoTable	1.3.6.1.4.1.5454.1.20.3.6		not-accessible	A table that contains subscriber unit entities.
IP suIPAddr	1.3.6.1.4.1.5454.1.20.3.6.1.7	IpAddress	read-only	Subscriber unit IP Address.
NTF suLinkDown	1.3.6.1.4.1.5454.1.20.16.0.8			The SNMP trap that is generated when a specific SU Powered Off.
NTF suLinkUp	1.3.6.1.4.1.5454.1.20.16.0.7			The SNMP trap that is generated when a specific SU Associated.
OCT suMAC	1.3.6.1.4.1.5454.1.20.3.6.1.2	OCTET STRING	read-only	Subscriber unit MAC Address. Format: 00 01 DE xx xx xx.
INT suMIR	1.3.6.1.4.1.5454.1.20.3.6.1.6	INTEGER	read-only	It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
INT suPolling	1.3.6.1.4.1.5454.1.20.3.6.1.3	INTEGER	read-only	It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network.
INT suPowerLevel	1.3.6.1.4.1.5454.1.20.3.6.1.24	INTEGER	read-write	It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the SU has its RF power output adjusted until its signal strength received in the AP is roughly the same.
INT suPowerLvlAll	1.3.6.1.4.1.5454.1.20.3.2	INTEGER	read-write	It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, all SUs have their RF power output adjusted until the signal strength for each SU as received in the AP is roughly the same.
INT suReboot	1.3.6.1.4.1.5454.1.20.3.6.1.26	INTEGER	read-write	AP issues reboot command to a specific subscriber unit.
INT suRebootAll	1.3.6.1.4.1.5454.1.20.3.4	INTEGER	read-write	AP broadcasts reboot command to all subscriber units.
STR suRemarks	1.3.6.1.4.1.5454.1.20.3.6.1.8	DisplayString	read-only	Subscriber unit Remark.
CTR suRfInOctets	1.3.6.1.4.1.5454.1.20.3.6.1.22	Counter	read-only	Number of payload octets received on the RF port.
CTR suRfOutOctets	1.3.6.1.4.1.5454.1.20.3.6.1.23	Counter	read-only	Number of payload octets transmitted on the RF port.
INT suRfRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.20	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on the RF port over the period specified by suStatisticsSamplePeriod.
INT suRfTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.21	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on the RF port over the period specified by suStatisticsSamplePeriod.
INT suRSSIFromAP	1.3.6.1.4.1.5454.1.20.3.6.1.16	INTEGER	read-only	Subscriber unit RSSI from AP (in dBm).
INT suRSSIFromSU	1.3.6.1.4.1.5454.1.20.3.6.1.15	INTEGER	read-only	Subscriber unit RSSI from SU (in dBm).
INT suStatisticsSamplePeriod	1.3.6.1.4.1.5454.1.20.3.3	INTEGER	read-write	A period (in minute) AP requests update on SU Info Table from all associated SUs.
INT suSUCount	1.3.6.1.4.1.5454.1.20.3.1	INTEGER	read-only	Number of subscriber units in the subscriber database.
INT suSUtoSU	1.3.6.1.4.1.5454.1.20.3.6.1.4	INTEGER	read-only	It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency.
INT suTCPIPForLocalEth	1.3.6.1.4.1.5454.1.20.3.6.1.27	INTEGER	read-write	When it is turned on, then the SU will process all the local TCP/IP service.
INT suTemperature	1.3.6.1.4.1.5454.1.20.3.6.1.25	INTEGER	read-only	Subscriber Unit temperature reading value (in Celsius).
INT suTxPower	1.3.6.1.4.1.5454.1.20.3.6.1.17	INTEGER	read-only	Subscriber unit Tx Power Level (in dBm).
tbw	1.3.6.1.4.1.5454.1
trango	1.3.6.1.4.1.5454
trapconfig	1.3.6.1.4.1.5454.1.20.4
IP trapconfigDest1IPAddress	1.3.6.1.4.1.5454.1.20.4.2	IpAddress	read-write	Trap destination 1 IP address.
IP trapconfigDest2IPAddress	1.3.6.1.4.1.5454.1.20.4.3	IpAddress	read-write	Trap destination 2 IP address.
INT trapconfigTrapCount	1.3.6.1.4.1.5454.1.20.4.1	INTEGER	read-only	Types of trap.
trapconfigTrapEntry	1.3.6.1.4.1.5454.1.20.4.4.1		not-accessible	Information about a specific Trango trap event.
trapconfigTrapTable	1.3.6.1.4.1.5454.1.20.4.4		not-accessible	A table that contains information of Trango trap events .

OID symbolic	OID numeric	Type	Access	Description
trango	1.3.6.1.4.1.5454
tbw	1.3.6.1.4.1.5454.1
m5830sap	1.3.6.1.4.1.5454.1.20
apsystem	1.3.6.1.4.1.5454.1.20.1
apversion	1.3.6.1.4.1.5454.1.20.1.1
OCT apversionHW	1.3.6.1.4.1.5454.1.20.1.1.1	OCTET STRING	read-only	Hardware version.
STR apversionFW	1.3.6.1.4.1.5454.1.20.1.1.2	DisplayString	read-only	Main firmware version. Format: HD.
OCT apversionFPGA	1.3.6.1.4.1.5454.1.20.1.1.3	OCTET STRING	read-only	FPGA firmware version.
OCT apversionChecksum	1.3.6.1.4.1.5454.1.20.1.1.4	OCTET STRING	read-only	AP firmware checksum.
OCT apsystemDeviceId	1.3.6.1.4.1.5454.1.20.1.2	OCTET STRING	read-only	MAC address.
INT apsystemBaseId	1.3.6.1.4.1.5454.1.20.1.3	INTEGER	read-write	Cluster that the AP belongs to. All APs and SUs in the same cluster shall have the same Base ID.
INT apsystemAPId	1.3.6.1.4.1.5454.1.20.1.4	INTEGER	read-write	AP ID. Each AP in a cluster shall have unique AP ID.
INT apsystemDefOpMode	1.3.6.1.4.1.5454.1.20.1.5	INTEGER	read-write	The operation mode (ap or off) the radio is on after reboot/power cycle.
INT apsystemCurOpMode	1.3.6.1.4.1.5454.1.20.1.6	INTEGER	read-only	Radio's current operation mode.
INT apsystemActivateOpmode	1.3.6.1.4.1.5454.1.20.1.7	INTEGER	read-write	Engage AP unit to ap operation mode.
IP apsystemIpAddr	1.3.6.1.4.1.5454.1.20.1.8	IpAddress	read-only	Current IP address.
IP apsystemSubnet	1.3.6.1.4.1.5454.1.20.1.9	IpAddress	read-only	Current Subnet mask.
IP apsystemDefaultGateway	1.3.6.1.4.1.5454.1.20.1.10	IpAddress	read-only	Current Default gateway.
STR apsystemReadCommStr	1.3.6.1.4.1.5454.1.20.1.11	DisplayString	read-write	SNMP agent read community string. It is used for authentication purpose.
STR apsystemWriteCommStr	1.3.6.1.4.1.5454.1.20.1.12	DisplayString	read-write	SNMP agent write community string. It is used for authentication purpose.
apswitches	1.3.6.1.4.1.5454.1.20.1.13
INT apswitchesBlockBroadcastMulticast	1.3.6.1.4.1.5454.1.20.1.13.1	INTEGER	read-write	This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link.
INT apswitchesSUtoSU	1.3.6.1.4.1.5454.1.20.1.13.2	INTEGER	read-write	This switch enables or disables the peer-to-peer feature among SUs through the AP. Before this switch is turned on, all SUs that want to communicate with each other have to be assigned to the same group.
INT apswitchesTFTPD	1.3.6.1.4.1.5454.1.20.1.13.4	INTEGER	read-write	This switch enables or disables the TFTP operation. When it is turned on, then the AP will be ready for code download.
INT apswitchesHTTPD	1.3.6.1.4.1.5454.1.20.1.13.5	INTEGER	read-write	When it is turned on, then the AP is accessible for configuring via web browser (e.g. IE or Nescape).
INT apsystemMIRThreshold	1.3.6.1.4.1.5454.1.20.1.14	INTEGER	read-write	Maximum Information Rate (in Kbps), the AP allows the network to utilize before enforcing CIR on each subscriber.
aptraffic	1.3.6.1.4.1.5454.1.20.1.15
INT aptrafficEthRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.1	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on Ethernet port over the last 60 seconds.
INT aptrafficEthTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.2	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on Ethernet port over the last 60 seconds.
INT aptrafficRfRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.3	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on RF port over the last 60 seconds.
INT aptrafficRfTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.4	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on RF port over the last 60 seconds.
CTR aptrafficEthInOctets	1.3.6.1.4.1.5454.1.20.1.15.5	Counter	read-only	Number of payload octets received on Ethernet port.
CTR aptrafficEthOutOctets	1.3.6.1.4.1.5454.1.20.1.15.6	Counter	read-only	Number of payload octets transmitted on Ethernet port.
CTR aptrafficRfInOctets	1.3.6.1.4.1.5454.1.20.1.15.7	Counter	read-only	Number of octets of SUs payload received from RF port.
CTR aptrafficRfOutOctets	1.3.6.1.4.1.5454.1.20.1.15.8	Counter	read-only	Number of octets of SUs payload transmitted to RF port.
INT apsystemTemperature	1.3.6.1.4.1.5454.1.20.1.16	INTEGER	read-only	Current AP temperature value (in Celsius).
INT apsystemUpdateFlashAndActivate	1.3.6.1.4.1.5454.1.20.1.17	INTEGER	read-write	Save system setting values to Flash and activate the settings.
INT apsystemReboot	1.3.6.1.4.1.5454.1.20.1.18	INTEGER	read-write	Reboot the radio.
apipconfig	1.3.6.1.4.1.5454.1.20.1.19
IP apipconfigIpAddress	1.3.6.1.4.1.5454.1.20.1.19.1	IpAddress	read-write	New IP address. It will be saved to non-volatile memory and activated in 5 secs.
IP apipconfigSubnet	1.3.6.1.4.1.5454.1.20.1.19.2	IpAddress	read-write	New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs.
IP apipconfigDefaultGateway	1.3.6.1.4.1.5454.1.20.1.19.3	IpAddress	read-write	New Default gateway. It will be saved to non-volatile memory and activated in 5 secs.
aprf	1.3.6.1.4.1.5454.1.20.2
INT aprfActiveChannel	1.3.6.1.4.1.5454.1.20.2.1	INTEGER	read-write	It specifies the current channel number the radio operates on.
STR aprfActivePolarization	1.3.6.1.4.1.5454.1.20.2.2	DisplayString	read-write	It specifies the current polarization the radio operates on.
aprftable	1.3.6.1.4.1.5454.1.20.2.3
INT aprftableChannel1	1.3.6.1.4.1.5454.1.20.2.3.1	INTEGER	read-write	RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel2	1.3.6.1.4.1.5454.1.20.2.3.2	INTEGER	read-write	RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel3	1.3.6.1.4.1.5454.1.20.2.3.3	INTEGER	read-write	RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel4	1.3.6.1.4.1.5454.1.20.2.3.4	INTEGER	read-write	RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel5	1.3.6.1.4.1.5454.1.20.2.3.5	INTEGER	read-write	RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel6	1.3.6.1.4.1.5454.1.20.2.3.6	INTEGER	read-write	RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel7	1.3.6.1.4.1.5454.1.20.2.3.7	INTEGER	read-write	RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel8	1.3.6.1.4.1.5454.1.20.2.3.8	INTEGER	read-write	RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel9	1.3.6.1.4.1.5454.1.20.2.3.9	INTEGER	read-write	RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel10	1.3.6.1.4.1.5454.1.20.2.3.10	INTEGER	read-write	RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel11	1.3.6.1.4.1.5454.1.20.2.3.11	INTEGER	read-write	RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel12	1.3.6.1.4.1.5454.1.20.2.3.12	INTEGER	read-write	RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel13	1.3.6.1.4.1.5454.1.20.2.3.13	INTEGER	read-write	RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel14	1.3.6.1.4.1.5454.1.20.2.3.14	INTEGER	read-write	RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel15	1.3.6.1.4.1.5454.1.20.2.3.15	INTEGER	read-write	RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel16	1.3.6.1.4.1.5454.1.20.2.3.16	INTEGER	read-write	RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel17	1.3.6.1.4.1.5454.1.20.2.3.17	INTEGER	read-write	RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel18	1.3.6.1.4.1.5454.1.20.2.3.18	INTEGER	read-write	RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel19	1.3.6.1.4.1.5454.1.20.2.3.19	INTEGER	read-write	RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel20	1.3.6.1.4.1.5454.1.20.2.3.20	INTEGER	read-write	RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel21	1.3.6.1.4.1.5454.1.20.2.3.21	INTEGER	read-write	RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel22	1.3.6.1.4.1.5454.1.20.2.3.22	INTEGER	read-write	RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel23	1.3.6.1.4.1.5454.1.20.2.3.23	INTEGER	read-write	RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel24	1.3.6.1.4.1.5454.1.20.2.3.24	INTEGER	read-write	RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel25	1.3.6.1.4.1.5454.1.20.2.3.25	INTEGER	read-write	RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel26	1.3.6.1.4.1.5454.1.20.2.3.26	INTEGER	read-write	RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel27	1.3.6.1.4.1.5454.1.20.2.3.27	INTEGER	read-write	RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel28	1.3.6.1.4.1.5454.1.20.2.3.28	INTEGER	read-write	RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel29	1.3.6.1.4.1.5454.1.20.2.3.29	INTEGER	read-write	RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel30	1.3.6.1.4.1.5454.1.20.2.3.30	INTEGER	read-write	RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
apism	1.3.6.1.4.1.5454.1.20.2.4
INT apismTxPowerMax	1.3.6.1.4.1.5454.1.20.2.4.1	INTEGER	read-only	The maximum ISM Tx power value can be set (in dBm).
INT apismTxPowerMin	1.3.6.1.4.1.5454.1.20.2.4.2	INTEGER	read-only	The minimum ISM Tx power value can be set (in dBm).
INT apismTxPower	1.3.6.1.4.1.5454.1.20.2.4.3	INTEGER	read-write	ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apismTxPowerMax and apismTxPowerMin for power setting range.
INT apismServiceRadius	1.3.6.1.4.1.5454.1.20.2.4.4	INTEGER	read-write	ISM RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one.
INT apismRxThreshold	1.3.6.1.4.1.5454.1.20.2.4.5	INTEGER	read-write	ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled.
INT apismTargetRSSI	1.3.6.1.4.1.5454.1.20.2.4.6	INTEGER	read-write	ISM RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from SU shall be no less than -75dBm.
apunii	1.3.6.1.4.1.5454.1.20.2.5
INT apuniiTxPowerMax	1.3.6.1.4.1.5454.1.20.2.5.1	INTEGER	read-only	This object is only applicable to M5830S radio. The maximum UNII Tx power value can be set (in dBm).
INT apuniiTxPowerMin	1.3.6.1.4.1.5454.1.20.2.5.2	INTEGER	read-only	This object is only applicable to M5830S radio. The minimum UNII Tx power value can be set (in dBm).
INT apuniiTxPower	1.3.6.1.4.1.5454.1.20.2.5.3	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range.
INT apuniiServiceRadius	1.3.6.1.4.1.5454.1.20.2.5.4	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one.
INT apuniiRxThreshold	1.3.6.1.4.1.5454.1.20.2.5.5	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP.
INT apuniiTargetRSSI	1.3.6.1.4.1.5454.1.20.2.5.6	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold.
su	1.3.6.1.4.1.5454.1.20.3
INT suSUCount	1.3.6.1.4.1.5454.1.20.3.1	INTEGER	read-only	Number of subscriber units in the subscriber database.
INT suPowerLvlAll	1.3.6.1.4.1.5454.1.20.3.2	INTEGER	read-write	It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, all SUs have their RF power output adjusted until the signal strength for each SU as received in the AP is roughly the same.
INT suStatisticsSamplePeriod	1.3.6.1.4.1.5454.1.20.3.3	INTEGER	read-write	A period (in minute) AP requests update on SU Info Table from all associated SUs.
INT suRebootAll	1.3.6.1.4.1.5454.1.20.3.4	INTEGER	read-write	AP broadcasts reboot command to all subscriber units.
sudb	1.3.6.1.4.1.5454.1.20.3.5
INT sudbDeleteOrAddID	1.3.6.1.4.1.5454.1.20.3.5.1	INTEGER	read-write	Subscriber unit ID (1..8190). Each subscriber in a sector shall have a unique ID.
OCT sudbAddMAC	1.3.6.1.4.1.5454.1.20.3.5.2	OCTET STRING	read-write	It is the MAC address of the subscriber unit, which can be found on the back of the SU.
INT sudbAddPolling	1.3.6.1.4.1.5454.1.20.3.5.3	INTEGER	read-write	It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network.
INT sudbAddSUtoSU	1.3.6.1.4.1.5454.1.20.3.5.4	INTEGER	read-write	It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency.
INT sudbAddCIR	1.3.6.1.4.1.5454.1.20.3.5.5	INTEGER	read-write	It is the Committed Information Rate (in Kbps) the AP allocates to SU.
INT sudbAddMIR	1.3.6.1.4.1.5454.1.20.3.5.6	INTEGER	read-write	It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
INT sudbAdd	1.3.6.1.4.1.5454.1.20.3.5.7	INTEGER	read-write	Add a subscriber (specified in object sudbDeleteOrAddID) to the subscriber database.
INT sudbDelete	1.3.6.1.4.1.5454.1.20.3.5.8	INTEGER	read-write	Delete a subscriber (specified in object sudbDeleteOrAddID) from the subscriber database.
suInfoTable	1.3.6.1.4.1.5454.1.20.3.6		not-accessible	A table that contains subscriber unit entities.
suInfoEntry	1.3.6.1.4.1.5454.1.20.3.6.1		not-accessible	Information about a specific subscriber unit retrieved by its ID number.
INT suID	1.3.6.1.4.1.5454.1.20.3.6.1.1	INTEGER	read-only	Subscriber unit ID. Each subscriber in a sector shall have a unique ID.
OCT suMAC	1.3.6.1.4.1.5454.1.20.3.6.1.2	OCTET STRING	read-only	Subscriber unit MAC Address. Format: 00 01 DE xx xx xx.
INT suPolling	1.3.6.1.4.1.5454.1.20.3.6.1.3	INTEGER	read-only	It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network.
INT suSUtoSU	1.3.6.1.4.1.5454.1.20.3.6.1.4	INTEGER	read-only	It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency.
INT suCIR	1.3.6.1.4.1.5454.1.20.3.6.1.5	INTEGER	read-only	It is the Committed Information Rate (in Kbps) the AP allocates to SU.
INT suMIR	1.3.6.1.4.1.5454.1.20.3.6.1.6	INTEGER	read-only	It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
IP suIPAddr	1.3.6.1.4.1.5454.1.20.3.6.1.7	IpAddress	read-only	Subscriber unit IP Address.
STR suRemarks	1.3.6.1.4.1.5454.1.20.3.6.1.8	DisplayString	read-only	Subscriber unit Remark.
OCT suHWVer	1.3.6.1.4.1.5454.1.20.3.6.1.9	OCTET STRING	read-only	Subscriber unit Hardware Version.
STR suFWVer	1.3.6.1.4.1.5454.1.20.3.6.1.10	DisplayString	read-only	Subscriber unit main firmware version.
OCT suFPGAVer	1.3.6.1.4.1.5454.1.20.3.6.1.11	OCTET STRING	read-only	Subscriber unit FPGA firmware version.
OCT suChecksum	1.3.6.1.4.1.5454.1.20.3.6.1.12	OCTET STRING	read-only	Subscriber unit firmware checksum.
INT suAssociation	1.3.6.1.4.1.5454.1.20.3.6.1.13	INTEGER	read-only	Subscriber unit association status.
INT suDIstance	1.3.6.1.4.1.5454.1.20.3.6.1.14	INTEGER	read-only	Distance of SU (in mile).
INT suRSSIFromSU	1.3.6.1.4.1.5454.1.20.3.6.1.15	INTEGER	read-only	Subscriber unit RSSI from SU (in dBm).
INT suRSSIFromAP	1.3.6.1.4.1.5454.1.20.3.6.1.16	INTEGER	read-only	Subscriber unit RSSI from AP (in dBm).
INT suTxPower	1.3.6.1.4.1.5454.1.20.3.6.1.17	INTEGER	read-only	Subscriber unit Tx Power Level (in dBm).
INT suEthRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.18	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on the Ethernet port over the period specified by suStatisticsSamplePeriod.
INT suEthTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.19	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on the Ethernet port over the period specified by suStatisticsSamplePeriod.
INT suRfRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.20	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on the RF port over the period specified by suStatisticsSamplePeriod.
INT suRfTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.21	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on the RF port over the period specified by suStatisticsSamplePeriod.
CTR suRfInOctets	1.3.6.1.4.1.5454.1.20.3.6.1.22	Counter	read-only	Number of payload octets received on the RF port.
CTR suRfOutOctets	1.3.6.1.4.1.5454.1.20.3.6.1.23	Counter	read-only	Number of payload octets transmitted on the RF port.
INT suPowerLevel	1.3.6.1.4.1.5454.1.20.3.6.1.24	INTEGER	read-write	It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the SU has its RF power output adjusted until its signal strength received in the AP is roughly the same.
INT suTemperature	1.3.6.1.4.1.5454.1.20.3.6.1.25	INTEGER	read-only	Subscriber Unit temperature reading value (in Celsius).
INT suReboot	1.3.6.1.4.1.5454.1.20.3.6.1.26	INTEGER	read-write	AP issues reboot command to a specific subscriber unit.
INT suTCPIPForLocalEth	1.3.6.1.4.1.5454.1.20.3.6.1.27	INTEGER	read-write	When it is turned on, then the SU will process all the local TCP/IP service.
trapconfig	1.3.6.1.4.1.5454.1.20.4
INT trapconfigTrapCount	1.3.6.1.4.1.5454.1.20.4.1	INTEGER	read-only	Types of trap.
IP trapconfigDest1IPAddress	1.3.6.1.4.1.5454.1.20.4.2	IpAddress	read-write	Trap destination 1 IP address.
IP trapconfigDest2IPAddress	1.3.6.1.4.1.5454.1.20.4.3	IpAddress	read-write	Trap destination 2 IP address.
trapconfigTrapTable	1.3.6.1.4.1.5454.1.20.4.4		not-accessible	A table that contains information of Trango trap events .
trapconfigTrapEntry	1.3.6.1.4.1.5454.1.20.4.4.1		not-accessible	Information about a specific Trango trap event.
INT aptrpIndex	1.3.6.1.4.1.5454.1.20.4.4.1.1	INTEGER	read-only	Trap index.
INT aptrpID	1.3.6.1.4.1.5454.1.20.4.4.1.2	INTEGER	read-only	Specific trap ID.
STR aptrpCommStr	1.3.6.1.4.1.5454.1.20.4.4.1.3	DisplayString	read-write	Specific trap community string.
INT aptrpEnable	1.3.6.1.4.1.5454.1.20.4.4.1.4	INTEGER	read-write	Enable a specific Trango trap event or not.
mibinfo	1.3.6.1.4.1.5454.1.20.5
STR mibinfoVersion	1.3.6.1.4.1.5454.1.20.5.1	DisplayString	read-only	Trango MIB Version.
m5830straps	1.3.6.1.4.1.5454.1.20.16
NTF suLinkUp	1.3.6.1.4.1.5454.1.20.16.0.7			The SNMP trap that is generated when a specific SU Associated.
NTF suLinkDown	1.3.6.1.4.1.5454.1.20.16.0.8			The SNMP trap that is generated when a specific SU Powered Off.
NTF apOpModeFailure	1.3.6.1.4.1.5454.1.20.16.0.9			The SNMP trap that is generated when a specific AP not being in ap mode during boot up sequence.

Counter (6)
CTR aptrafficEthInOctets	1.3.6.1.4.1.5454.1.20.1.15.5	Counter	read-only	Number of payload octets received on Ethernet port.
CTR aptrafficEthOutOctets	1.3.6.1.4.1.5454.1.20.1.15.6	Counter	read-only	Number of payload octets transmitted on Ethernet port.
CTR aptrafficRfInOctets	1.3.6.1.4.1.5454.1.20.1.15.7	Counter	read-only	Number of octets of SUs payload received from RF port.
CTR aptrafficRfOutOctets	1.3.6.1.4.1.5454.1.20.1.15.8	Counter	read-only	Number of octets of SUs payload transmitted to RF port.
CTR suRfInOctets	1.3.6.1.4.1.5454.1.20.3.6.1.22	Counter	read-only	Number of payload octets received on the RF port.
CTR suRfOutOctets	1.3.6.1.4.1.5454.1.20.3.6.1.23	Counter	read-only	Number of payload octets transmitted on the RF port.
DisplayString (8)
STR aprfActivePolarization	1.3.6.1.4.1.5454.1.20.2.2	DisplayString	read-write	It specifies the current polarization the radio operates on.
STR apsystemReadCommStr	1.3.6.1.4.1.5454.1.20.1.11	DisplayString	read-write	SNMP agent read community string. It is used for authentication purpose.
STR apsystemWriteCommStr	1.3.6.1.4.1.5454.1.20.1.12	DisplayString	read-write	SNMP agent write community string. It is used for authentication purpose.
STR aptrpCommStr	1.3.6.1.4.1.5454.1.20.4.4.1.3	DisplayString	read-write	Specific trap community string.
STR apversionFW	1.3.6.1.4.1.5454.1.20.1.1.2	DisplayString	read-only	Main firmware version. Format: HD.
STR mibinfoVersion	1.3.6.1.4.1.5454.1.20.5.1	DisplayString	read-only	Trango MIB Version.
STR suFWVer	1.3.6.1.4.1.5454.1.20.3.6.1.10	DisplayString	read-only	Subscriber unit main firmware version.
STR suRemarks	1.3.6.1.4.1.5454.1.20.3.6.1.8	DisplayString	read-only	Subscriber unit Remark.
INTEGER (93)
INT apismRxThreshold	1.3.6.1.4.1.5454.1.20.2.4.5	INTEGER	read-write	ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled.
INT apismServiceRadius	1.3.6.1.4.1.5454.1.20.2.4.4	INTEGER	read-write	ISM RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one.
INT apismTargetRSSI	1.3.6.1.4.1.5454.1.20.2.4.6	INTEGER	read-write	ISM RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from SU shall be no less than -75dBm.
INT apismTxPower	1.3.6.1.4.1.5454.1.20.2.4.3	INTEGER	read-write	ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apismTxPowerMax and apismTxPowerMin for power setting range.
INT apismTxPowerMax	1.3.6.1.4.1.5454.1.20.2.4.1	INTEGER	read-only	The maximum ISM Tx power value can be set (in dBm).
INT apismTxPowerMin	1.3.6.1.4.1.5454.1.20.2.4.2	INTEGER	read-only	The minimum ISM Tx power value can be set (in dBm).
INT aprfActiveChannel	1.3.6.1.4.1.5454.1.20.2.1	INTEGER	read-write	It specifies the current channel number the radio operates on.
INT aprftableChannel1	1.3.6.1.4.1.5454.1.20.2.3.1	INTEGER	read-write	RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel10	1.3.6.1.4.1.5454.1.20.2.3.10	INTEGER	read-write	RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel11	1.3.6.1.4.1.5454.1.20.2.3.11	INTEGER	read-write	RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel12	1.3.6.1.4.1.5454.1.20.2.3.12	INTEGER	read-write	RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel13	1.3.6.1.4.1.5454.1.20.2.3.13	INTEGER	read-write	RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel14	1.3.6.1.4.1.5454.1.20.2.3.14	INTEGER	read-write	RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel15	1.3.6.1.4.1.5454.1.20.2.3.15	INTEGER	read-write	RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel16	1.3.6.1.4.1.5454.1.20.2.3.16	INTEGER	read-write	RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel17	1.3.6.1.4.1.5454.1.20.2.3.17	INTEGER	read-write	RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel18	1.3.6.1.4.1.5454.1.20.2.3.18	INTEGER	read-write	RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel19	1.3.6.1.4.1.5454.1.20.2.3.19	INTEGER	read-write	RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel2	1.3.6.1.4.1.5454.1.20.2.3.2	INTEGER	read-write	RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel20	1.3.6.1.4.1.5454.1.20.2.3.20	INTEGER	read-write	RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel21	1.3.6.1.4.1.5454.1.20.2.3.21	INTEGER	read-write	RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel22	1.3.6.1.4.1.5454.1.20.2.3.22	INTEGER	read-write	RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel23	1.3.6.1.4.1.5454.1.20.2.3.23	INTEGER	read-write	RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel24	1.3.6.1.4.1.5454.1.20.2.3.24	INTEGER	read-write	RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel25	1.3.6.1.4.1.5454.1.20.2.3.25	INTEGER	read-write	RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel26	1.3.6.1.4.1.5454.1.20.2.3.26	INTEGER	read-write	RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel27	1.3.6.1.4.1.5454.1.20.2.3.27	INTEGER	read-write	RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel28	1.3.6.1.4.1.5454.1.20.2.3.28	INTEGER	read-write	RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel29	1.3.6.1.4.1.5454.1.20.2.3.29	INTEGER	read-write	RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel3	1.3.6.1.4.1.5454.1.20.2.3.3	INTEGER	read-write	RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel30	1.3.6.1.4.1.5454.1.20.2.3.30	INTEGER	read-write	RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel4	1.3.6.1.4.1.5454.1.20.2.3.4	INTEGER	read-write	RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel5	1.3.6.1.4.1.5454.1.20.2.3.5	INTEGER	read-write	RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel6	1.3.6.1.4.1.5454.1.20.2.3.6	INTEGER	read-write	RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel7	1.3.6.1.4.1.5454.1.20.2.3.7	INTEGER	read-write	RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel8	1.3.6.1.4.1.5454.1.20.2.3.8	INTEGER	read-write	RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT aprftableChannel9	1.3.6.1.4.1.5454.1.20.2.3.9	INTEGER	read-write	RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
INT apswitchesBlockBroadcastMulticast	1.3.6.1.4.1.5454.1.20.1.13.1	INTEGER	read-write	This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link.
INT apswitchesHTTPD	1.3.6.1.4.1.5454.1.20.1.13.5	INTEGER	read-write	When it is turned on, then the AP is accessible for configuring via web browser (e.g. IE or Nescape).
INT apswitchesSUtoSU	1.3.6.1.4.1.5454.1.20.1.13.2	INTEGER	read-write	This switch enables or disables the peer-to-peer feature among SUs through the AP. Before this switch is turned on, all SUs that want to communicate with each other have to be assigned to the same group.
INT apswitchesTFTPD	1.3.6.1.4.1.5454.1.20.1.13.4	INTEGER	read-write	This switch enables or disables the TFTP operation. When it is turned on, then the AP will be ready for code download.
INT apsystemActivateOpmode	1.3.6.1.4.1.5454.1.20.1.7	INTEGER	read-write	Engage AP unit to ap operation mode.
INT apsystemAPId	1.3.6.1.4.1.5454.1.20.1.4	INTEGER	read-write	AP ID. Each AP in a cluster shall have unique AP ID.
INT apsystemBaseId	1.3.6.1.4.1.5454.1.20.1.3	INTEGER	read-write	Cluster that the AP belongs to. All APs and SUs in the same cluster shall have the same Base ID.
INT apsystemCurOpMode	1.3.6.1.4.1.5454.1.20.1.6	INTEGER	read-only	Radio's current operation mode.
INT apsystemDefOpMode	1.3.6.1.4.1.5454.1.20.1.5	INTEGER	read-write	The operation mode (ap or off) the radio is on after reboot/power cycle.
INT apsystemMIRThreshold	1.3.6.1.4.1.5454.1.20.1.14	INTEGER	read-write	Maximum Information Rate (in Kbps), the AP allows the network to utilize before enforcing CIR on each subscriber.
INT apsystemReboot	1.3.6.1.4.1.5454.1.20.1.18	INTEGER	read-write	Reboot the radio.
INT apsystemTemperature	1.3.6.1.4.1.5454.1.20.1.16	INTEGER	read-only	Current AP temperature value (in Celsius).
INT apsystemUpdateFlashAndActivate	1.3.6.1.4.1.5454.1.20.1.17	INTEGER	read-write	Save system setting values to Flash and activate the settings.
INT aptrafficEthRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.1	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on Ethernet port over the last 60 seconds.
INT aptrafficEthTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.2	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on Ethernet port over the last 60 seconds.
INT aptrafficRfRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.3	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on RF port over the last 60 seconds.
INT aptrafficRfTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.1.15.4	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on RF port over the last 60 seconds.
INT aptrpEnable	1.3.6.1.4.1.5454.1.20.4.4.1.4	INTEGER	read-write	Enable a specific Trango trap event or not.
INT aptrpID	1.3.6.1.4.1.5454.1.20.4.4.1.2	INTEGER	read-only	Specific trap ID.
INT aptrpIndex	1.3.6.1.4.1.5454.1.20.4.4.1.1	INTEGER	read-only	Trap index.
INT apuniiRxThreshold	1.3.6.1.4.1.5454.1.20.2.5.5	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP.
INT apuniiServiceRadius	1.3.6.1.4.1.5454.1.20.2.5.4	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one.
INT apuniiTargetRSSI	1.3.6.1.4.1.5454.1.20.2.5.6	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold.
INT apuniiTxPower	1.3.6.1.4.1.5454.1.20.2.5.3	INTEGER	read-write	This object is only applicable to M5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters apuniiTxPowerMax and apuniiTxPowerMin for power setting range.
INT apuniiTxPowerMax	1.3.6.1.4.1.5454.1.20.2.5.1	INTEGER	read-only	This object is only applicable to M5830S radio. The maximum UNII Tx power value can be set (in dBm).
INT apuniiTxPowerMin	1.3.6.1.4.1.5454.1.20.2.5.2	INTEGER	read-only	This object is only applicable to M5830S radio. The minimum UNII Tx power value can be set (in dBm).
INT suAssociation	1.3.6.1.4.1.5454.1.20.3.6.1.13	INTEGER	read-only	Subscriber unit association status.
INT suCIR	1.3.6.1.4.1.5454.1.20.3.6.1.5	INTEGER	read-only	It is the Committed Information Rate (in Kbps) the AP allocates to SU.
INT sudbAdd	1.3.6.1.4.1.5454.1.20.3.5.7	INTEGER	read-write	Add a subscriber (specified in object sudbDeleteOrAddID) to the subscriber database.
INT sudbAddCIR	1.3.6.1.4.1.5454.1.20.3.5.5	INTEGER	read-write	It is the Committed Information Rate (in Kbps) the AP allocates to SU.
INT sudbAddMIR	1.3.6.1.4.1.5454.1.20.3.5.6	INTEGER	read-write	It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
INT sudbAddPolling	1.3.6.1.4.1.5454.1.20.3.5.3	INTEGER	read-write	It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network.
INT sudbAddSUtoSU	1.3.6.1.4.1.5454.1.20.3.5.4	INTEGER	read-write	It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency.
INT sudbDelete	1.3.6.1.4.1.5454.1.20.3.5.8	INTEGER	read-write	Delete a subscriber (specified in object sudbDeleteOrAddID) from the subscriber database.
INT sudbDeleteOrAddID	1.3.6.1.4.1.5454.1.20.3.5.1	INTEGER	read-write	Subscriber unit ID (1..8190). Each subscriber in a sector shall have a unique ID.
INT suDIstance	1.3.6.1.4.1.5454.1.20.3.6.1.14	INTEGER	read-only	Distance of SU (in mile).
INT suEthRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.18	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on the Ethernet port over the period specified by suStatisticsSamplePeriod.
INT suEthTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.19	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on the Ethernet port over the period specified by suStatisticsSamplePeriod.
INT suID	1.3.6.1.4.1.5454.1.20.3.6.1.1	INTEGER	read-only	Subscriber unit ID. Each subscriber in a sector shall have a unique ID.
INT suMIR	1.3.6.1.4.1.5454.1.20.3.6.1.6	INTEGER	read-only	It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
INT suPolling	1.3.6.1.4.1.5454.1.20.3.6.1.3	INTEGER	read-only	It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network.
INT suPowerLevel	1.3.6.1.4.1.5454.1.20.3.6.1.24	INTEGER	read-write	It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the SU has its RF power output adjusted until its signal strength received in the AP is roughly the same.
INT suPowerLvlAll	1.3.6.1.4.1.5454.1.20.3.2	INTEGER	read-write	It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, all SUs have their RF power output adjusted until the signal strength for each SU as received in the AP is roughly the same.
INT suReboot	1.3.6.1.4.1.5454.1.20.3.6.1.26	INTEGER	read-write	AP issues reboot command to a specific subscriber unit.
INT suRebootAll	1.3.6.1.4.1.5454.1.20.3.4	INTEGER	read-write	AP broadcasts reboot command to all subscriber units.
INT suRfRxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.20	INTEGER	read-only	Average payload data throughput (in Kbits/sec) received on the RF port over the period specified by suStatisticsSamplePeriod.
INT suRfTxAvgThroughputLog	1.3.6.1.4.1.5454.1.20.3.6.1.21	INTEGER	read-only	Average payload data throughput (in Kbits/sec) transmitted on the RF port over the period specified by suStatisticsSamplePeriod.
INT suRSSIFromAP	1.3.6.1.4.1.5454.1.20.3.6.1.16	INTEGER	read-only	Subscriber unit RSSI from AP (in dBm).
INT suRSSIFromSU	1.3.6.1.4.1.5454.1.20.3.6.1.15	INTEGER	read-only	Subscriber unit RSSI from SU (in dBm).
INT suStatisticsSamplePeriod	1.3.6.1.4.1.5454.1.20.3.3	INTEGER	read-write	A period (in minute) AP requests update on SU Info Table from all associated SUs.
INT suSUCount	1.3.6.1.4.1.5454.1.20.3.1	INTEGER	read-only	Number of subscriber units in the subscriber database.
INT suSUtoSU	1.3.6.1.4.1.5454.1.20.3.6.1.4	INTEGER	read-only	It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency.
INT suTCPIPForLocalEth	1.3.6.1.4.1.5454.1.20.3.6.1.27	INTEGER	read-write	When it is turned on, then the SU will process all the local TCP/IP service.
INT suTemperature	1.3.6.1.4.1.5454.1.20.3.6.1.25	INTEGER	read-only	Subscriber Unit temperature reading value (in Celsius).
INT suTxPower	1.3.6.1.4.1.5454.1.20.3.6.1.17	INTEGER	read-only	Subscriber unit Tx Power Level (in dBm).
INT trapconfigTrapCount	1.3.6.1.4.1.5454.1.20.4.1	INTEGER	read-only	Types of trap.
IpAddress (9)
IP apipconfigDefaultGateway	1.3.6.1.4.1.5454.1.20.1.19.3	IpAddress	read-write	New Default gateway. It will be saved to non-volatile memory and activated in 5 secs.
IP apipconfigIpAddress	1.3.6.1.4.1.5454.1.20.1.19.1	IpAddress	read-write	New IP address. It will be saved to non-volatile memory and activated in 5 secs.
IP apipconfigSubnet	1.3.6.1.4.1.5454.1.20.1.19.2	IpAddress	read-write	New Subnet mask. It will be saved to non-volatile memory and activated in 5 secs.
IP apsystemDefaultGateway	1.3.6.1.4.1.5454.1.20.1.10	IpAddress	read-only	Current Default gateway.
IP apsystemIpAddr	1.3.6.1.4.1.5454.1.20.1.8	IpAddress	read-only	Current IP address.
IP apsystemSubnet	1.3.6.1.4.1.5454.1.20.1.9	IpAddress	read-only	Current Subnet mask.
IP suIPAddr	1.3.6.1.4.1.5454.1.20.3.6.1.7	IpAddress	read-only	Subscriber unit IP Address.
IP trapconfigDest1IPAddress	1.3.6.1.4.1.5454.1.20.4.2	IpAddress	read-write	Trap destination 1 IP address.
IP trapconfigDest2IPAddress	1.3.6.1.4.1.5454.1.20.4.3	IpAddress	read-write	Trap destination 2 IP address.
OCTET STRING (9)
OCT apsystemDeviceId	1.3.6.1.4.1.5454.1.20.1.2	OCTET STRING	read-only	MAC address.
OCT apversionChecksum	1.3.6.1.4.1.5454.1.20.1.1.4	OCTET STRING	read-only	AP firmware checksum.
OCT apversionFPGA	1.3.6.1.4.1.5454.1.20.1.1.3	OCTET STRING	read-only	FPGA firmware version.
OCT apversionHW	1.3.6.1.4.1.5454.1.20.1.1.1	OCTET STRING	read-only	Hardware version.
OCT suChecksum	1.3.6.1.4.1.5454.1.20.3.6.1.12	OCTET STRING	read-only	Subscriber unit firmware checksum.
OCT sudbAddMAC	1.3.6.1.4.1.5454.1.20.3.5.2	OCTET STRING	read-write	It is the MAC address of the subscriber unit, which can be found on the back of the SU.
OCT suFPGAVer	1.3.6.1.4.1.5454.1.20.3.6.1.11	OCTET STRING	read-only	Subscriber unit FPGA firmware version.
OCT suHWVer	1.3.6.1.4.1.5454.1.20.3.6.1.9	OCTET STRING	read-only	Subscriber unit Hardware Version.
OCT suMAC	1.3.6.1.4.1.5454.1.20.3.6.1.2	OCTET STRING	read-only	Subscriber unit MAC Address. Format: 00 01 DE xx xx xx.
No type (24)
apipconfig	1.3.6.1.4.1.5454.1.20.1.19
apism	1.3.6.1.4.1.5454.1.20.2.4
NTF apOpModeFailure	1.3.6.1.4.1.5454.1.20.16.0.9			The SNMP trap that is generated when a specific AP not being in ap mode during boot up sequence.
aprf	1.3.6.1.4.1.5454.1.20.2
aprftable	1.3.6.1.4.1.5454.1.20.2.3
apswitches	1.3.6.1.4.1.5454.1.20.1.13
apsystem	1.3.6.1.4.1.5454.1.20.1
aptraffic	1.3.6.1.4.1.5454.1.20.1.15
apunii	1.3.6.1.4.1.5454.1.20.2.5
apversion	1.3.6.1.4.1.5454.1.20.1.1
m5830sap	1.3.6.1.4.1.5454.1.20
m5830straps	1.3.6.1.4.1.5454.1.20.16
mibinfo	1.3.6.1.4.1.5454.1.20.5
su	1.3.6.1.4.1.5454.1.20.3
sudb	1.3.6.1.4.1.5454.1.20.3.5
suInfoEntry	1.3.6.1.4.1.5454.1.20.3.6.1		not-accessible	Information about a specific subscriber unit retrieved by its ID number.
suInfoTable	1.3.6.1.4.1.5454.1.20.3.6		not-accessible	A table that contains subscriber unit entities.
NTF suLinkDown	1.3.6.1.4.1.5454.1.20.16.0.8			The SNMP trap that is generated when a specific SU Powered Off.
NTF suLinkUp	1.3.6.1.4.1.5454.1.20.16.0.7			The SNMP trap that is generated when a specific SU Associated.
tbw	1.3.6.1.4.1.5454.1
trango	1.3.6.1.4.1.5454
trapconfig	1.3.6.1.4.1.5454.1.20.4
trapconfigTrapEntry	1.3.6.1.4.1.5454.1.20.4.4.1		not-accessible	Information about a specific Trango trap event.
trapconfigTrapTable	1.3.6.1.4.1.5454.1.20.4.4		not-accessible	A table that contains information of Trango trap events .

RFC description

Manages Trango M5830S point-to-multipoint wireless backhaul radio configuration and link statistics.

Start monitoring Trango M5830S point-to-multipoint wireless backhaul radio (link-quality/traffic statistics status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TRANGOM5830S-MIB

This MIB depends on

Related MIBs

What Is TRANGOM5830S-MIB?

Supported Devices

Monitoring Examples

RFC description