All MIBs › TRANGOM5830S-MIB › apuniiTargetRSSI
apuniiTargetRSSI
Module: TRANGOM5830S-MIB
OID (symbolic): TRANGOM5830S-MIB::apuniiTargetRSSI
OID (numeric): 1.3.6.1.4.1.5454.1.20.2.5.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
This object is only applicable to M5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.5454.1.20.2.5.6 snmpwalk -v2c -c public <target> TRANGOM5830S-MIB::apuniiTargetRSSI
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.5454.1.20.2.5.6.1 snmpget -v2c -c public <target> TRANGOM5830S-MIB::apuniiTargetRSSI.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.5454.1.20.2.5.6.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.5454 | trango | TRANGO-APEX-MIB |
| 1.3.6.1.4.1.5454.1 | tbw | TRANGO-APEX-MIB |
| 1.3.6.1.4.1.5454.1.20 | m5830sap | TRANGOM5830S-MIB |
| 1.3.6.1.4.1.5454.1.20.2 | aprf | TRANGOM5830S-MIB |
| 1.3.6.1.4.1.5454.1.20.2.5 | apunii | TRANGOM5830S-MIB |
| 1.3.6.1.4.1.5454.1.20.2.5.6 | apuniiTargetRSSI | TRANGOM5830S-MIB |