All MIBs › TRANGO-APEX-TRAP-MIB
Category: Wireless Backhaul
Description:
Defines Trango Apex wireless backhaul SNMP trap notifications for link and system events.
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE |
From TRANGO-APEX-MIB
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| apex | OBJECT-IDENTITY |
What Is TRANGO-APEX-TRAP-MIB?
TRANGO-APEX-TRAP-MIB is a vendor MIB from Trango Systems defining SNMP trap notifications for its Apex wireless backhaul radios, complementing the RF configuration data in TRANGO-APEX-RF-MIB. It defines fault/event objects for conditions such as system reboot, RF link lock status, threshold crossings, mean-square-error (MSE), bit error rate (BER), and frame error rate (FER). Its monitoring value is event-driven fault detection for the wireless link's hardware and RF-layer software status, alerting operators to reboots and degrading link-quality metrics without requiring continuous polling. It is tightly paired with TRANGO-APEX-RF-MIB, whose scalar RF objects these traps reference. It is deployed in wireless backhaul networks where Trango Apex radios feed trap-based alerts into an NMS for real-time link-quality monitoring. Network engineers evaluating or troubleshooting this functionality can download the TRANGO-APEX-TRAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in TRANGO-APEX-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- RF link lock status change events
- bit error rate threshold events
- frame error rate threshold events
- mean square error threshold events
- system reboot events
Supported Devices
- Trango Apex point-to-point wireless backhaul radio
Monitoring Examples
An NMS would be configured to receive trangotrap notifications including trapthreshold crossings and traplock changes to detect when an Apex radio link drops RF lock, and trapber/trapfer/trapmse traps to catch rising bit-error-rate, frame-error-rate, or MSE degradation before a link fails outright. A traplock trap combined with a system reboot notification would explain a sudden link outage on a backhaul path. This is a notification-definition module, so these are event-based alerts rather than continuously polled counters.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| trangotrap | 1.3.6.1.4.1.5454.1.60.6 | |||
| NTF trapReboot | 1.3.6.1.4.1.5454.1.60.6.1 | send traps when the system reboots | ||
| NTF trapStartUp | 1.3.6.1.4.1.5454.1.60.6.2 | send traps when the system starts up | ||
| traplock | 1.3.6.1.4.1.5454.1.60.6.3 | |||
| NTF trapModemLock | 1.3.6.1.4.1.5454.1.60.6.3.1 | send traps when the system lose modem lock | ||
| NTF trapTimingLock | 1.3.6.1.4.1.5454.1.60.6.3.2 | Timing Lock in modem changed | ||
| NTF trapInnerCodeLock | 1.3.6.1.4.1.5454.1.60.6.3.3 | send traps when the system lose Inner Code lock | ||
| NTF trapEqualizerLock | 1.3.6.1.4.1.5454.1.60.6.3.4 | send traps when the system lose Equalizer lock | ||
| NTF trapFrameSyncLock | 1.3.6.1.4.1.5454.1.60.6.3.5 | send traps when the system lose Frame Sync lock | ||
| trapthreshold | 1.3.6.1.4.1.5454.1.60.6.4 | |||
| trapmse | 1.3.6.1.4.1.5454.1.60.6.4.1 | |||
| NTF trapMSEMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.1.1 | send traps when the MSE fall out from the threshold | ||
| NTF trapMSEMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.1.2 | send traps when the MSE fall out from the threshold | ||
| trapber | 1.3.6.1.4.1.5454.1.60.6.4.2 | |||
| NTF trapBERMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.2.1 | send traps when the BER fall out from the threshold | ||
| NTF trapBERMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.2.2 | send traps when the BER fall out from the threshold | ||
| trapfer | 1.3.6.1.4.1.5454.1.60.6.4.3 | |||
| NTF trapFERMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.3.1 | send traps when the FER fall out from the threshold | ||
| NTF trapFERMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.3.2 | send traps when the FER fall out from the threshold | ||
| traprssi | 1.3.6.1.4.1.5454.1.60.6.4.4 | |||
| NTF trapRSSIMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.4.1 | send traps when the RSSI fall out from the threshold | ||
| NTF trapRSSIMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.4.2 | send traps when the RSSI fall out from the threshold | ||
| trapidutemp | 1.3.6.1.4.1.5454.1.60.6.4.5 | |||
| NTF trapIDUTempMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.5.1 | send traps when the ethernet status exceed threshold | ||
| NTF trapIDUTempMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.5.2 | send traps when the ethernet status exceed threshold | ||
| trapodutemp | 1.3.6.1.4.1.5454.1.60.6.4.6 | |||
| NTF trapODUTempMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.6.1 | send traps when the T1 status exceed threshold | ||
| NTF trapODUTempMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.6.2 | send traps when the T1 status exceed threshold | ||
| trapinport | 1.3.6.1.4.1.5454.1.60.6.4.7 | |||
| NTF trapInPortUtilMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.7.1 | send traps when the IN port utilization fall below min threshold | ||
| NTF trapInPortUtilMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.7.2 | send traps when the IN port utilization exceed max threshold | ||
| trapoutport | 1.3.6.1.4.1.5454.1.60.6.4.8 | |||
| NTF trapOutPortUtilMinThreshold | 1.3.6.1.4.1.5454.1.60.6.4.8.1 | send traps when the OUT port utilization fall below min threshold | ||
| NTF trapOutPortUtilMaxThreshold | 1.3.6.1.4.1.5454.1.60.6.4.8.2 | send traps when the OUT port utilization exceed max threshold | ||
| trapstandby | 1.3.6.1.4.1.5454.1.60.6.5 | |||
| NTF trapStandbyLinkDown | 1.3.6.1.4.1.5454.1.60.6.5.1 | send traps when Standby link is down | ||
| NTF trapStandbyLinkUp | 1.3.6.1.4.1.5454.1.60.6.5.2 | send traps when Standby link is up | ||
| NTF trapSwitchover | 1.3.6.1.4.1.5454.1.60.6.5.3 | send traps when backup unit takes over the link | ||
| trapeth | 1.3.6.1.4.1.5454.1.60.6.6 | |||
| trapethstatus | 1.3.6.1.4.1.5454.1.60.6.6.1 | |||
| NTF trapEth1StatusUpdate | 1.3.6.1.4.1.5454.1.60.6.6.1.1 | send traps when ethernet port 1 status changed | ||
| NTF trapEth2StatusUpdate | 1.3.6.1.4.1.5454.1.60.6.6.1.2 | send traps when ethernet port 2 status changed | ||
| NTF trapEth3StatusUpdate | 1.3.6.1.4.1.5454.1.60.6.6.1.3 | send traps when ethernet port 3 status changed | ||
| NTF trapEth4StatusUpdate | 1.3.6.1.4.1.5454.1.60.6.6.1.4 | send traps when ethernet port 4 status changed | ||
| NTF trapDownShift | 1.3.6.1.4.1.5454.1.60.6.8 | send traps when the system downshift the modulation | ||
| NTF trapRapidPortShutdown | 1.3.6.1.4.1.5454.1.60.6.9 | send traps when the rapid port shutdown occurs | ||
| NTF trapRPSPortUp | 1.3.6.1.4.1.5454.1.60.6.10 | send traps when the re-enable ports after RPS port down |
RFC description
Defines trap notifications for Trango Apex wireless equipment covering reboot, lock, and threshold events.
Start monitoring Trango Apex point-to-point wireless backhaul radio (reboot/link-quality-threshold notification status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.