TIMETRA-SATELLITE-MIB

All MIBs › TIMETRA-SATELLITE-MIB

Organization: Nokia

Last Updated: 2016-01-01

Category: Hardware and Chassis Management, Nokia SR OS / Alcatel-Lucent 7750 SR

Description: Manages Nokia/Alcatel-Lucent 7750 SR satellite node configuration, connectivity, and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TIMETRA-SATELLITE-MIB?

This Nokia proprietary MIB manages Satellite nodes on the SROS platform -- remote access/aggregation devices controlled by a parent 7750 SR/7950 XRS chassis as if they were local line cards. It exposes per-satellite inventory and status: satellite class and ID, assigned versus equipped hardware type, MAC address, software repository, and row status/last-changed tracking. This is squarely a hardware/software status MIB: tmnxSatAssignedType versus tmnxSatEquippedType flags a mismatch between expected and actually-installed satellite hardware, and tmnxSatSoftwareRepository together with tmnxSatLastChanged tracks firmware provisioning and recent state changes for each satellite unit. As a Nokia SROS extension it depends on the broader chassis/satellite management framework used across the Timetra suite. It's typically deployed where a 7750 SR/7950 XRS acts as a host chassis extending its port capacity through one or more remote satellite access nodes. Engineers can download the TIMETRA-SATELLITE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-SATELLITE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia/Alcatel-Lucent 7750 SR
7950 XRS with satellite access nodes

Monitoring Examples

An admin polls tmnxSatelliteTable / tmnxSatelliteEntry keyed by tmnxSatClass and tmnxSatId to compare tmnxSatAssignedType against tmnxSatEquippedType, catching a case where the wrong satellite hardware type was physically installed. Checking tmnxSatMacAddress and tmnxSatSoftwareRepository confirms which firmware a given satellite is running, and an unexpected tmnxSatLastChanged timestamp combined with a row-status change would alert an operator that a satellite unexpectedly went offline or was re-provisioned.

What Can Be Monitored

assigned vs. equipped satellite type
satellite MAC address
software repository/firmware
last-changed timestamp
row status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-CHASSIS-MIB

TmnxPhysChassisClass
TmnxPhysChassisIndex
TmnxPortAdminStatus
TmnxRefInState
TmnxSETSRefAlarm
TmnxSETSRefQualified
TmnxSETSRefSource
TmnxSETSStatus
TmnxSSMQualityLevel
tmnxHwClass	OBJECT-TYPE
tmnxHwOperState	OBJECT-TYPE

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

TItemDescription
TNamedItem
TNamedItemOrEmpty
TmnxActionType
TmnxAdminState
TmnxDisplayStringURL
TmnxOperState
TmnxPortID

How to Use in IPNetwork Monitor

Example using tmnxSatSyncIfTimingFreqOffset OID:

Select a Nokia/Alcatel-Lucent 7750 SR / 7950 XRS with satellite access node (satellite hardware/firmware status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type tmnxSatSyncIfTimingFreqOffset into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the frequency offset of the currently selected timing reference for this satellite, in parts per million (ppm). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the offset drifts away from zero beyond the tolerance your timing plan allows, since a growing frequency offset indicates a synchronization problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
timetraSatelliteMIBModule	1.3.6.1.4.1.6527.1.1.3.103			This document is the SNMP MIB module for the Nokia SROS implementation of Satellites. Copyright (c) 2014-2016 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxSatelliteConformance	1.3.6.1.4.1.6527.3.1.1.103
tmnxSatelliteCompliances	1.3.6.1.4.1.6527.3.1.1.103.1
tmnxSatelliteComplianceV14v0	1.3.6.1.4.1.6527.3.1.1.103.1.1			The compliance statement for the management of satellites for release 14.0 on Nokia SROS series systems.
tmnxSatelliteGroups	1.3.6.1.4.1.6527.3.1.1.103.2
tmnxSatelliteV14v0Groups	1.3.6.1.4.1.6527.3.1.1.103.2.1
tmnxSatelliteGroupV14v0	1.3.6.1.4.1.6527.3.1.1.103.2.1.1			The group of objects maintaining configuration for satellites on Nokia SROS series systems for release 14.0.
tmnxSatelliteTypeGroupV14v0	1.3.6.1.4.1.6527.3.1.1.103.2.1.2			The group of objects maintaining information for satellite types on Nokia SROS series systems for release 14.0.
tmnxSatellitePortMapGroupV14v0	1.3.6.1.4.1.6527.3.1.1.103.2.1.3			The group of objects maintaining information for satellite port mapping on Nokia SROS series systems for release 14.0.
tmnxSatelliteSyncIfTimGroupV14v0	1.3.6.1.4.1.6527.3.1.1.103.2.1.4			The group of objects maintaining satellite synchronous interface timing capabilities on Nokia SROS series systems for release 14.0.
tmnxSatelliteNotifGroupV14v0	1.3.6.1.4.1.6527.3.1.1.103.2.1.5			The group of notifications supporting satellite management on Nokia SROS series systems for release 14.0.
tmnxSatelliteNotifyObjsGrpV14v0	1.3.6.1.4.1.6527.3.1.1.103.2.1.6			The group of accessible-for-notify objects supporting satellite management on Nokia SROS series systems for release 14.0.
tmnxSatelliteObjs	1.3.6.1.4.1.6527.3.1.2.103
tmnxSatelliteConfigTimestamps	1.3.6.1.4.1.6527.3.1.2.103.1
TIM tmnxSatelliteTableLastChanged	1.3.6.1.4.1.6527.3.1.2.103.1.2	TimeStamp	read-only	The value of tmnxSatelliteTableLastChanged indicates the time, since system startup, when tmnxSatelliteTable last changed configuration.
tmnxSatelliteConfigurations	1.3.6.1.4.1.6527.3.1.2.103.2
tmnxSatelliteTable	1.3.6.1.4.1.6527.3.1.2.103.2.2		not-accessible	The tmnxSatelliteTable contains configuration information for satellites.
tmnxSatelliteEntry	1.3.6.1.4.1.6527.3.1.2.103.2.2.1		not-accessible	The tmnxSatelliteEntry consists of the configurable objects for a given satellite.
TMN tmnxSatClass	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.1	TmnxPhysChassisClass	not-accessible	The value of tmnxSatClass specifies the class of the satellite. Supported values: ethSatChassis (5) - Ethernet Satellite class
TMN tmnxSatId	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.2	TmnxPhysChassisIndex	not-accessible	The value of tmnxSatId specifies a unique value which identifies the satellite.
ROW tmnxSatRowStatus	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.3	RowStatus	read-create	The value of tmnxSatRowStatus specifies the row status. It allows the creation and deletion of rows in tmnxSatelliteTable.
TIM tmnxSatLastChanged	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.4	TimeStamp	read-only	The value of tmnxSatLastChanged indicates the time, since system startup, that the configuration of the row was created or modified.
TMN tmnxSatAssignedType	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.5	TmnxSatelliteType	read-create	The value of tmnxSatAssignedType specifies the administratively assigned type of the satellite.
TMN tmnxSatEquippedType	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.6	TmnxSatelliteType	read-only	The value of tmnxSatEquippedType indicates the satellite type that is equipped.
MAC tmnxSatMacAddress	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.7	MacAddress	read-create	The value of tmnxSatMacAddress specifies the MAC address of the satellite. A value of all-zeroes indicates this object has not been configured.
TNA tmnxSatSoftwareRepository	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.8	TNamedItemOrEmpty	read-create	The value of tmnxSatSoftwareRepository specifies the software repository to be used by the satellite. An empty string indicates this object has not been configured.
TIT tmnxSatDescription	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.9	TItemDescription	read-create	The value of tmnxSatDescription specifies the description of the satellite. An empty string indicates this object has not been configured.
TMN tmnxSatReboot	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.10	TmnxActionType	read-create	The value of tmnxSatReboot specifies if the satellite will perform a reboot. Setting the value to 'doAction (1)' causes a soft-reboot of the entire satellite including all of its CPM and IOM cards.
TMN tmnxSatUpgrade	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.11	TmnxActionType	read-create	The value of tmnxSatUpgrade specifies if the satellite will perform an upgrade of all firmware, as well as a reboot of the entire satellite including all its CPM and IOM cards. CAUTION: This upgrade and reboot may take several minutes to complete. The satellite must not be reset or powered down, nor cards inserted or removed, during this process. Any of these prohibited actions may cause the cards to be rendered inoperable. If tmnxSatUpgrade is set to 'doAction (1)', tmnxSatReboot must also be set to 'doAction (1)' in the same SNMP SET request PDU.
TMN tmnxSatSyncBootEnv	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.12	TmnxActionType	read-create	The value of tmnxSatSyncBootEnv specifies if the satellite will synchronize the boot environment with its software repository. Setting the value to 'doAction (1)' will synchronize the satellite with all of the files required to boot the satellite in the software repository (tmnxSatSoftwareRepository).
T/F tmnxSatSyncEEnabled	1.3.6.1.4.1.6527.3.1.2.103.2.2.1.13	TruthValue	read-create	The value of tmnxSatSyncEEnabled specifies whether or not synchronous Ethernet is enabled on the satellite.
tmnxSatelliteStatus	1.3.6.1.4.1.6527.3.1.2.103.3
tmnxSatelliteTypeTable	1.3.6.1.4.1.6527.3.1.2.103.3.1		not-accessible	The tmnxSatelliteTypeTable consists of an entry for each satellite type supported by the system.
tmnxSatelliteTypeEntry	1.3.6.1.4.1.6527.3.1.2.103.3.1.1		not-accessible	Each row entry represents an Nokia SROS series satellite type. Rows in this table are created by the agent at initialization and cannot be created or destroyed by SNMP Set requests.
TMN tmnxSatTypeIndex	1.3.6.1.4.1.6527.3.1.2.103.3.1.1.1	TmnxSatelliteType	not-accessible	The value of tmnxSatTypeIndex specifies the unique index which identifies the type of Nokia SROS series satellite.
TMN tmnxSatTypeClass	1.3.6.1.4.1.6527.3.1.2.103.3.1.1.2	TmnxPhysChassisClass	read-only	The value of tmnxSatTypeClass indicates the class that the type of Nokia SROS series satellite pertains to.
TNA tmnxSatTypeName	1.3.6.1.4.1.6527.3.1.2.103.3.1.1.3	TNamedItem	read-only	The value of tmnxSatTypeName indicates the administrative name that identifies the type of Nokia SROS series satellite. This name string is used in CLI commands to specify a particular satellite type.
TIT tmnxSatTypeDescription	1.3.6.1.4.1.6527.3.1.2.103.3.1.1.4	TItemDescription	read-only	The value of tmnxSatTypeDescription indicates the detailed description of this Nokia SROS series satellite type.
tmnxSatellitePortMapTable	1.3.6.1.4.1.6527.3.1.2.103.3.2		not-accessible	The tmnxSatellitePortMapTable consists of port mapping information for all satellite ports. Rows are created automatically by the system.
tmnxSatellitePortMapEntry	1.3.6.1.4.1.6527.3.1.2.103.3.2.1		not-accessible	Each tmnxSatellitePortMapEntry represents port mapping information for a given satellite port.
TMN tmnxSatClientPortId	1.3.6.1.4.1.6527.3.1.2.103.3.2.1.1	TmnxPortID	not-accessible	The value of tmnxSatClientPortId specifies the port identifier of the satellite client port.
U32 tmnxSatUplinkId	1.3.6.1.4.1.6527.3.1.2.103.3.2.1.2	Unsigned32	not-accessible	The value of tmnxSatUplinkId specifies the satellite uplink identifier.
TMN tmnxSatUplinkPortId	1.3.6.1.4.1.6527.3.1.2.103.3.2.1.3	TmnxPortID	read-only	The value of tmnxSatUplinkPortId indicates the port identifier of the satellite uplink port associated with the satellite client port.
T/F tmnxSatUplinkActive	1.3.6.1.4.1.6527.3.1.2.103.3.2.1.4	TruthValue	read-only	The value of tmnxSatUplinkActive indicates whether or not the satellite uplink port is active for the satellite client port.
TMN tmnxSatHostPortId	1.3.6.1.4.1.6527.3.1.2.103.3.2.1.5	TmnxPortID	read-only	The value of tmnxSatHostPortId indicates the port identifier of the host port which is connected to the satellite uplink port. A value of '1e000000'H indicates that the satellite uplink port is not connected to a host port.
tmnxSatelliteSyncIfTimingTable	1.3.6.1.4.1.6527.3.1.2.103.3.3		not-accessible	The tmnxSatelliteSyncIfTimingTable consists of synchronous interface timing information for every satellite in the system.
tmnxSatelliteSyncIfTimingEntry	1.3.6.1.4.1.6527.3.1.2.103.3.3.1		not-accessible	Each tmnxSatelliteSyncIfTimingEntry represents the configuration of Synchronous Equipment Timing Source (SETS) of the satellite. Entries are created/destroyed automatically by the system. If the value of the reference source port is a valid Port ID then the reference is a port. If the value of the source hardware is a valid non-zero HWIndex then the source is the hardware specified by the HWIndex.
TMN tmnxSatSyncIfTimingRef1SrcPort	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.1	TmnxPortID	read-only	The value of tmnxSatSyncIfTimingRef1SrcPort indicates the source port of the first timing reference for the satellite. A value of '1e000000'H indicates that there is no source port for this reference.
TMN tmnxSatSyncIfTimingRef1AdmStatus	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.2	TmnxPortAdminStatus	read-only	The value of tmnxSatSyncIfTimingRef1AdmStatus indicates the administrative status of the first timing reference for the satellite.
T/F tmnxSatSyncIfTimingRef1InUse	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.3	TruthValue	read-only	The value of tmnxSatSyncIfTimingRef1InUse indicates whether the first timing reference for the satellite is presently being used by the synchronous timing subsystem. If it is in use, tmnxSatSyncIfTimingFreqOffset indicates the frequency offset for this reference.
TMN tmnxSatSyncIfTimingRef1Qualified	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.4	TmnxSETSRefQualified	read-only	The value of tmnxSatSyncIfTimingRef1Qualified indicates whether the first timing reference for the satellite is qualified for use by the synchronous timing subsystem. If the value of tmnxSatSyncIfTimingRef1Qualified is set to 'not-qualified (2)', then the object tmnxSatSyncIfTimingRef1Alarm gives the reason for disqualification.
TMN tmnxSatSyncIfTimingRef1Alarm	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.5	TmnxSETSRefAlarm	read-only	The value of tmnxSatSyncIfTimingRef1Alarm indicates the alarms on the first reference for the satellite. If any of the bits are set, then the first reference is disqualified by the timing subsystem and the value of tmnxSatSyncIfTimingRef1Qualified is set to 'not-qualified (2)'.
TMN tmnxSatSyncIfTimingRef1RxQltyLvl	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.6	TmnxSSMQualityLevel	read-only	The value of tmnxSatSyncIfTimingRef1RxQltyLvl indicates the received SSM Quality Level of the first reference for the satellite.
TMN tmnxSatSyncIfTimingRef1State	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.7	TmnxRefInState	read-only	The value of tmnxSatSyncIfTimingRef1State indicates the operational state of the timing for the first reference on the satellite.
TMN tmnxSatSyncIfTimingRef2SrcPort	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.8	TmnxPortID	read-only	The value of tmnxSatSyncIfTimingRef2SrcPort indicates the source port of the second timing reference for the satellite. A value of '1e000000'H indicates that there is no source port for this reference.
TMN tmnxSatSyncIfTimingRef2AdmStatus	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.9	TmnxPortAdminStatus	read-only	The value of tmnxSatSyncIfTimingRef2AdmStatus indicates the administrative status of the second timing reference for the satellite.
T/F tmnxSatSyncIfTimingRef2InUse	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.10	TruthValue	read-only	The value of tmnxSatSyncIfTimingRef2InUse indicates whether the second timing reference for the satellite is presently being used by the synchronous timing subsystem.
TMN tmnxSatSyncIfTimingRef2Qualified	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.11	TmnxSETSRefQualified	read-only	The value of tmnxSatSyncIfTimingRef2Qualified indicates whether the second timing reference for the satellite is qualified for use by the synchronous timing subsystem. If the value of tmnxSatSyncIfTimingRef2Qualified is 'not-qualified (2)' then the object tmnxSatSyncIfTimingRef2Alarm gives the reason for disqualification.
TMN tmnxSatSyncIfTimingRef2Alarm	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.12	TmnxSETSRefAlarm	read-only	The value of tmnxSatSyncIfTimingRef2Alarm indicates the alarms on the second reference for the satellite. If any of the bits are set, then the second reference is disqualified by the timing subsystem and the value of tmnxSatSyncIfTimingRef2Qualified is set to 'not-qualified (2)'.
TMN tmnxSatSyncIfTimingRef2RxQltyLvl	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.13	TmnxSSMQualityLevel	read-only	The value of tmnxSatSyncIfTimingRef2RxQltyLvl indicates the received SSM Quality Level of the second reference for the satellite.
TMN tmnxSatSyncIfTimingRef2State	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.14	TmnxRefInState	read-only	The value of tmnxSatSyncIfTimingRef2State indicates the operational state of the timing for the second reference on the satellite.
I32 tmnxSatSyncIfTimingFreqOffsetEx	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.15	Integer32	read-only	The value of tmnxSatSyncIfTimingFreqOffset indicates the frequency offset of the current selected timing reference for the satellite, in parts per million (ppm).
TMN tmnxSatSyncIfTimingStatus	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.16	TmnxSETSStatus	read-only	The value of tmnxSatSyncIfTimingStatus indicates the present status of the Synchronous Timing Equipment Source (SETS) for the satellite.
TMN tmnxSatSyncIfTimingSystemQltyLvl	1.3.6.1.4.1.6527.3.1.2.103.3.3.1.17	TmnxSSMQualityLevel	read-only	The value of tmnxSatSyncIfTimingSystemQltyLvl indicates the quality level of the system timing reference for the satellite. This is normally the quality level of the selected timing reference. If no timing reference has been selected, it indicates the freerun/holdover quality of the system.
tmnxSatelliteStatistics	1.3.6.1.4.1.6527.3.1.2.103.4
tmnxSatelliteNotifyObjects	1.3.6.1.4.1.6527.3.1.2.103.5
STR tmnxSatNotifyFailureReason	1.3.6.1.4.1.6527.3.1.2.103.5.1	DisplayString	accessible-for-notify	The value of tmnxSatNotifyFailureReason indicates the reason why a satellite is in a failed state.
INT tmnxSatNotifySyncIfTimRefAlarm	1.3.6.1.4.1.6527.3.1.2.103.5.2	INTEGER	accessible-for-notify	The value of tmnxSatNotifySyncIfTimRefAlarm indicates the reason a timing reference alarm has been raised.
tmnxSatelliteNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.103
tmnxSatelliteNotifications	1.3.6.1.4.1.6527.3.1.3.103.0
NTF tmnxSatelliteOperStateChange	1.3.6.1.4.1.6527.3.1.3.103.0.1			[CAUSE] The tmnxSatelliteOperStateChange notification is generated when there is a change in tmnxHwOperState for the satellite. [EFFECT] The satellite has changed states. The tmnxSatNotifyFailureReason is only valid when tmnxHwOperState is 'failed (5)', and should otherwise be blank. [RECOVERY] Contact Nokia customer support if tmnxSatNotifyFailureReason does not provide enough information to rectify the situation.
NTF tmnxSatSyncIfTimRefSwitch	1.3.6.1.4.1.6527.3.1.3.103.0.2			[CAUSE] The tmnxSatSyncIfTimRefSwitch notification is generated when there is a change of which timing reference is providing timing for the satellite. [EFFECT] This notification is for informational purposes only. [RECOVERY] No recovery required.
NTF tmnxSatSyncIfTimSystemQuality	1.3.6.1.4.1.6527.3.1.3.103.0.3			The tmnxEqSyncIfTimingSystemQuality notification is generated when there is a change in the system timing quality level for the satellite. This notification is a point-in-time state change event. [CAUSE] This notification may be triggered for the following reasons: 1) There has been a switch in the timing reference in use by the network element, either because the previously active timing reference was disqualified, or to ensure that the network element is using the timing reference with the best timing quality. 2) There has been a change in the active timing reference's quality and the change does not result in a timing reference switch. 3) The network element has transitioned into or out of the holdover state. [EFFECT] The system quality level is used to determine the SSM code transmitted on synchronous interfaces. This may affect the SSM code transmitted on some or all interfaces, which may affect the distribution of timing throughout the network. [RECOVERY] If the customer is expecting the system to be locked to a reference of a particular quality and the system quality has decreased, the customer will need to determine the root cause (for example, loss of communication with a satellite) and resolve the issue.
NTF tmnxSatSyncIfTimRef1Quality	1.3.6.1.4.1.6527.3.1.3.103.0.4			[CAUSE] The tmnxSatSyncIfTimRef1Quality notification is generated when the received quality level changes on the first timing reference of the satellite. [EFFECT] This notification is for informational purposes only. [RECOVERY] No recovery required.
NTF tmnxSatSyncIfTimRef2Quality	1.3.6.1.4.1.6527.3.1.3.103.0.5			[CAUSE] The tmnxSatSyncIfTimRef2Quality notification is generated when the received quality level changes on the second timing reference of the satellite. [EFFECT] This notification is for informational purposes only. [RECOVERY] No recovery required.
NTF tmnxSatSyncIfTimHoldover	1.3.6.1.4.1.6527.3.1.3.103.0.6			[CAUSE] The tmnxSatSyncIfTimHoldover notification is generated when the synchronous equipment timing subsystem of the satellite transitions into a holdover state. [EFFECT] The transmit timing of all synchronous interfaces on the satellite are no longer synchronous with the host. This could result in traffic loss. [RECOVERY] Investigate the state of the two input timing references on the satellite and the links between the host and the satellite (i.e. the uplinks) that drive them for failures.
NTF tmnxSatSyncIfTimHoldoverClear	1.3.6.1.4.1.6527.3.1.3.103.0.7			[CAUSE] The tmnxSatSyncIfTimHoldoverClear notification is generated when the synchronous equipment timing subsystem of the satellite transitions out of the holdover state. [EFFECT] This notification is for informational purposes only. [RECOVERY] No recovery required.
NTF tmnxSatSyncIfTimRef1Alarm	1.3.6.1.4.1.6527.3.1.3.103.0.8			[CAUSE] The tmnxSatSyncIfTimRef1Alarm notification is generated when an alarm condition on the first timing reference is detected. [EFFECT] If the other timing reference is free of faults, the satellite no longer has a backup timing reference. If the other timing reference also has a fault, the satellite will likely no longer be synchronous with the host. [RECOVERY] Investigate the state of the link between the host and the satellite (i.e. the uplink) that drives the first timing reference on the satellite for faults.
NTF tmnxSatSyncIfTimRef1AlarmClear	1.3.6.1.4.1.6527.3.1.3.103.0.9			[CAUSE] The tmnxSatSyncIfTimRef1AlarmClear notification is generated when the alarm condition on the first timing reference is cleared. [EFFECT] This notification is for informational purposes only. [RECOVERY] No recovery required.
NTF tmnxSatSyncIfTimRef2Alarm	1.3.6.1.4.1.6527.3.1.3.103.0.10			[CAUSE] The tmnxSatSyncIfTimRef2Alarm notification is generated when an alarm condition on the second timing reference is detected. [EFFECT] If the other timing reference is free of faults, the satellite no longer has a backup timing reference. If the other timing reference also has a fault, the satellite will likely no longer be synchronous with the host. [RECOVERY] Investigate the state of the link between the host and the satellite (i.e. the uplink) that drives the second timing reference on the satellite for faults.
NTF tmnxSatSyncIfTimRef2AlarmClear	1.3.6.1.4.1.6527.3.1.3.103.0.11			[CAUSE] The tmnxSatSyncIfTimRef1AlarmClear notification is generated when the alarm condition on the second timing reference is cleared. [EFFECT] This notification is for informational purposes only. [RECOVERY] No recovery required.

RFC description

Nokia SROS Satellite implementation for distributed network node management.

Start monitoring Nokia/Alcatel-Lucent 7750 SR / 7950 XRS with satellite access nodes (satellite hardware/firmware status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-SATELLITE-MIB